created for quicklogic special io logic

HDL/common/ql_io_logic.v

@@ -0,0 +1,52 @@
+`timescale 1ns/1ps
+
+//-----------------------------------------------------
+// Function    : An embedded I/O with
+//               - An I/O isolation signal to set 
+//                 the I/O in input mode. This is to avoid
+//                 any unexpected output signals to damage
+//                 circuits outside the FPGA due to configurable
+//                 memories are not properly initialized
+//                 This feature may not be needed if the configurable
+//                 memory cell has a built-in set/reset functionality
+//               - Internal protection circuitry to ensure
+//                 clean signals at all the SOC I/O ports
+//                 This is to avoid 
+//                   - output any random signal
+//                     when the I/O is in input mode, also avoid
+//                   - driven by any random signal
+//                     when the I/O is output mode
+//
+// Note: This cell is built with Standard Cells from HD library
+//       It is already technology mapped and can be directly used
+//       for physical design
+//-----------------------------------------------------
+module EMBEDDED_IO_HD (
+  input SOC_IN,   // Input to drive the inpad signal
+  output SOC_OUT, // Output the outpad signal
+  output FPGA_IN, // Input data to FPGA
+  input FPGA_OUT, // Output data from FPGA
+  input FPGA_IO_DIR, 
+  input CFG_DONE 
+);
+
+  wire cfg_done_b;
+  sky130_fd_sc_hd__inv_1 INV		(
+	  				.A(CFG_DONE),
+					.Y(cfg_done_b)
+					);
+  sky130_fd_sc_hd__or3_1 OR3 		(
+	  				.A(FPGA_IO_DIR),
+                                        .B(FPGA_OUT),
+                                        .C(cfg_done_b),
+                                        .X(SOC_OUT)
+                                        );
+  sky130_fd_sc_hd__and2_1 AND2 		(
+	  				.A(FPGA_IO_DIR),
+                                        .B(SOC_IN),
+                                        .X(FPGA_IN)
+                                        );
+
+
+endmodule
+