new revised isolation io logic

HDL/common/ql_iso_io_logic.v

@@ -0,0 +1,70 @@
+`timescale 1ns/1ps
+
+//-----------------------------------------------------
+// Function    : An embedded I/O with
+//               - An I/O isolation signal to set 
+//                 the I/O in input mode. This is to avoid
+//                 any unexpected output signals to damage
+//                 circuits outside the FPGA due to configurable
+//                 memories are not properly initialized
+//                 This feature may not be needed if the configurable
+//                 memory cell has a built-in set/reset functionality
+//               - Internal protection circuitry to ensure
+//                 clean signals at all the SOC I/O ports
+//                 This is to avoid 
+//                   - output any random signal
+//                     when the I/O is in input mode, also avoid
+//                   - driven by any random signal
+//                     when the I/O is output mode
+//
+// Note: This cell is built with Standard Cells from HD library
+//       It is already technology mapped and can be directly used
+//       for physical design
+//-----------------------------------------------------
+module EMBEDDED_IO_HD (
+  input SOC_IN,   // Input to drive the inpad signal
+  output SOC_OUT, // Output the outpad signal
+  output FPGA_IN, // Input data to FPGA
+  input FPGA_OUT, // Output data from FPGA
+  input FPGA_IO_DIR, 
+  input CFG_DONE, 
+  input IO_ISOL_N 
+);
+
+  wire cfg_done_b;
+  wire io_isol;
+  wire f2a_o_gate;
+  wire f2a_o_int;
+  sky130_fd_sc_hd__inv_1 INV_CFG_DONE	(
+	  				.A(CFG_DONE),
+					.Y(cfg_done_b)
+					);
+  sky130_fd_sc_hd__inv_1 INV_ISOL_N     (
+                                        .A(IO_ISOL_N),
+                                        .Y(io_isol)
+                                        );
+  // output path
+  sky130_fd_sc_hd__nor2_1 NOR2 		(
+	  				.A(FPGA_IO_DIR),
+                                        .B(cfg_done_b),
+                                        .Y(f2a_o_gate)
+                                        );
+  sky130_fd_sc_hd__nand2_1 NAND2 	(
+	  				.A(FPGA_OUT),
+                                        .B(f2a_o_gate),
+                                        .Y(f2a_o_int)
+                                        );
+  sky130_fd_sc_hd__einvn_4 EINVN_OUT	(
+	  				.A(f2a_o_int),
+                                        .TE_B(io_isol),
+                                        .Z(SOC_OUT)
+                                        );
+  // input path 
+  sky130_fd_sc_hd__and3_1 AND3 		(
+                                        .A(SOC_IN),
+	  				.B(FPGA_IO_DIR),
+                                        .C(IO_ISOL_N),
+                                        .X(FPGA_IN)
+                                        );
+endmodule
+