[Demo] Runs only counter example

FPGA1212_QLSOFA_HD_PNR/FPGA1212_QLSOFA_HD_task/config/task_benchmarks.conf

@@ -0,0 +1,54 @@
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+# Configuration file for running experiments
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+# timeout_each_job : FPGA Task script splits fpga flow into multiple jobs
+# Each job execute fpga_flow script on combination of architecture & benchmark
+# timeout_each_job is timeout for each job
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+
+[GENERAL]
+run_engine=openfpga_shell
+power_tech_file = ${PATH:OPENFPGA_PATH}/openfpga_flow/tech/PTM_45nm/45nm.xml
+power_analysis = true
+spice_output=false
+verilog_output=true
+timeout_each_job = 1*60
+fpga_flow=yosys_vpr
+arch_variable_file=${PATH:TASK_DIR}/design_variables.yml
+
+
+[OpenFPGA_SHELL]
+openfpga_shell_template=${PATH:TASK_DIR}/generate_testbench.openfpga
+openfpga_arch_file=${PATH:TASK_DIR}/arch/openfpga_arch.xml
+openfpga_sim_setting_file=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_simulation_settings/auto_sim_openfpga.xml
+external_fabric_key_file=${PATH:TASK_DIR}/arch/fabric_key.xml
+openfpga_vpr_device_layout=12x12
+openfpga_vpr_route_chan_width=60
+
+[ARCHITECTURES]
+arch0=${PATH:TASK_DIR}/arch/vpr_arch.xml
+
+[BENCHMARKS]
+bench0=${PATH:TASK_DIR}/BENCHMARK/and2/and2.v
+bench1=${PATH:TASK_DIR}/BENCHMARK/and2_latch/and2_latch.v
+bench2=${PATH:TASK_DIR}/BENCHMARK/bin2bcd/bin2bcd.v
+bench3=${PATH:TASK_DIR}/BENCHMARK/counter/counter.v
+bench4=${PATH:TASK_DIR}/BENCHMARK/routing_test/routing_test.v
+# RS decoder needs 1.5k LUT4, exceeding device capacity
+#bench5=${PATH:TASK_DIR}/BENCHMARK/rs_decoder/rtl/rs_decoder.v
+bench6=${PATH:TASK_DIR}/BENCHMARK/simon_bit_serial/rtl/*.v
+bench7=${PATH:TASK_DIR}/BENCHMARK/and2_or2/and2_or2.v
+
+[SYNTHESIS_PARAM]
+bench0_top = and2
+bench1_top = and2_latch
+bench2_top = bin2bcd
+bench3_top = counter
+bench4_top = routing_test
+# RS decoder needs 1.5k LUT4, exceeding device capacity
+#bench5_top = rs_decoder_top
+bench6_top = top_module
+bench7_top = and2_or2
+
+[SCRIPT_PARAM_MIN_ROUTE_CHAN_WIDTH]
+#end_flow_with_test=

FPGA1212_QLSOFA_HD_PNR/FPGA1212_QLSOFA_HD_task/config/task_simulation.conf

@@ -29,26 +29,10 @@ openfpga_vpr_route_chan_width=60
 arch0=${PATH:TASK_DIR}/arch/vpr_arch.xml
 
 [BENCHMARKS]
-bench0=${PATH:TASK_DIR}/BENCHMARK/and2/and2.v
-bench1=${PATH:TASK_DIR}/BENCHMARK/and2_latch/and2_latch.v
-bench2=${PATH:TASK_DIR}/BENCHMARK/bin2bcd/bin2bcd.v
-bench3=${PATH:TASK_DIR}/BENCHMARK/counter/counter.v
-bench4=${PATH:TASK_DIR}/BENCHMARK/routing_test/routing_test.v
-# RS decoder needs 1.5k LUT4, exceeding device capacity
-#bench5=${PATH:TASK_DIR}/BENCHMARK/rs_decoder/rtl/rs_decoder.v
-bench6=${PATH:TASK_DIR}/BENCHMARK/simon_bit_serial/rtl/*.v
-bench7=${PATH:TASK_DIR}/BENCHMARK/and2_or2/and2_or2.v
+bench0=${PATH:TASK_DIR}/BENCHMARK/counter/counter.v
 
 [SYNTHESIS_PARAM]
-bench0_top = and2
-bench1_top = and2_latch
-bench2_top = bin2bcd
-bench3_top = counter
-bench4_top = routing_test
-# RS decoder needs 1.5k LUT4, exceeding device capacity
-#bench5_top = rs_decoder_top
-bench6_top = top_module
-bench7_top = and2_or2
+bench0_top = counter
 
 [SCRIPT_PARAM_MIN_ROUTE_CHAN_WIDTH]
 #end_flow_with_test=