SOFA/BENCHMARK/sdc_controller/rtl/sd_data_master.v

210 lines
8.0 KiB
Coq
Raw Normal View History

2020-12-16 09:05:53 -06:00
//////////////////////////////////////////////////////////////////////
//// ////
//// WISHBONE SD Card Controller IP Core ////
//// ////
//// sd_data_master.v ////
//// ////
//// This file is part of the WISHBONE SD Card ////
//// Controller IP Core project ////
//// http://opencores.org/project,sd_card_controller ////
//// ////
//// Description ////
//// State machine resposible for controlling data transfers ////
//// on 4-bit sd card data interface ////
//// ////
//// Author(s): ////
//// - Marek Czerski, ma.czerski@gmail.com ////
//// ////
//////////////////////////////////////////////////////////////////////
//// ////
//// Copyright (C) 2013 Authors ////
//// ////
//// Based on original work by ////
//// Adam Edvardsson (adam.edvardsson@orsoc.se) ////
//// ////
//// Copyright (C) 2009 Authors ////
//// ////
//// This source file may be used and distributed without ////
//// restriction provided that this copyright statement is not ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer. ////
//// ////
//// This source file is free software; you can redistribute it ////
//// and/or modify it under the terms of the GNU Lesser General ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any ////
//// later version. ////
//// ////
//// This source is distributed in the hope that it will be ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
//// PURPOSE. See the GNU Lesser General Public License for more ////
//// details. ////
//// ////
//// You should have received a copy of the GNU Lesser General ////
//// Public License along with this source; if not, download it ////
//// from http://www.opencores.org/lgpl.shtml ////
//// ////
//////////////////////////////////////////////////////////////////////
`include "sd_defines.h"
module sd_data_master (
input sd_clk,
input rst,
input start_tx_i,
input start_rx_i,
//Output to SD-Host Reg
output reg d_write_o,
output reg d_read_o,
//To fifo filler
output reg start_tx_fifo_o,
output reg start_rx_fifo_o,
input tx_fifo_empty_i,
input tx_fifo_full_i,
input rx_fifo_full_i,
//SD-DATA_Host
input xfr_complete_i,
input crc_ok_i,
//status output
output reg [`INT_DATA_SIZE-1:0] int_status_o,
input int_status_rst_i
);
reg tx_cycle;
parameter SIZE = 3;
reg [SIZE-1:0] state;
reg [SIZE-1:0] next_state;
parameter IDLE = 3'b000;
parameter START_TX_FIFO = 3'b001;
parameter START_RX_FIFO = 3'b010;
parameter DATA_TRANSFER = 3'b100;
reg trans_done;
always @(state or start_tx_i or start_rx_i or tx_fifo_full_i or xfr_complete_i or trans_done)
begin: FSM_COMBO
case(state)
IDLE: begin
if (start_tx_i == 1) begin
next_state <= START_TX_FIFO;
end
else if (start_rx_i == 1) begin
next_state <= START_RX_FIFO;
end
else begin
next_state <= IDLE;
end
end
START_TX_FIFO: begin
if (tx_fifo_full_i == 1 && xfr_complete_i == 0)
next_state <= DATA_TRANSFER;
else
next_state <= START_TX_FIFO;
end
START_RX_FIFO: begin
if (xfr_complete_i == 0)
next_state <= DATA_TRANSFER;
else
next_state <= START_RX_FIFO;
end
DATA_TRANSFER: begin
if (trans_done)
next_state <= IDLE;
else
next_state <= DATA_TRANSFER;
end
default: next_state <= IDLE;
endcase
end
//----------------Seq logic------------
always @(posedge sd_clk or posedge rst)
begin: FSM_SEQ
if (rst) begin
state <= IDLE;
end
else begin
state <= next_state;
end
end
//Output logic-----------------
always @(posedge sd_clk or posedge rst)
begin
if (rst) begin
start_tx_fifo_o <= 0;
start_rx_fifo_o <= 0;
d_write_o <= 0;
d_read_o <= 0;
trans_done <= 0;
tx_cycle <= 0;
int_status_o <= 0;
end
else begin
case(state)
IDLE: begin
start_tx_fifo_o <= 0;
start_rx_fifo_o <= 0;
d_write_o <= 0;
d_read_o <= 0;
trans_done <= 0;
tx_cycle <= 0;
end
START_RX_FIFO: begin
start_rx_fifo_o <= 1;
start_tx_fifo_o <= 0;
tx_cycle <= 0;
d_read_o <= 1;
end
START_TX_FIFO: begin
start_rx_fifo_o <= 0;
start_tx_fifo_o <= 1;
tx_cycle <= 1;
if (tx_fifo_full_i == 1)
d_write_o <= 1;
end
DATA_TRANSFER: begin
d_read_o <= 0;
d_write_o <= 0;
if (tx_cycle) begin
if (tx_fifo_empty_i) begin
if (!trans_done)
int_status_o[`INT_DATA_CFE] <= 1;
trans_done <= 1;
//stop sd_data_serial_host
d_write_o <= 1;
d_read_o <= 1;
end
end
else begin
if (rx_fifo_full_i) begin
if (!trans_done)
int_status_o[`INT_DATA_CFE] <= 1;
trans_done <= 1;
//stop sd_data_serial_host
d_write_o <= 1;
d_read_o <= 1;
end
end
if (xfr_complete_i) begin //Transfer complete
d_write_o <= 0;
d_read_o <= 0;
trans_done <= 1;
if (!crc_ok_i) begin //Wrong CRC and Data line free.
if (!trans_done)
int_status_o[`INT_DATA_CCRCE] <= 1;
end
else if (crc_ok_i) begin //Data Line free
if (!trans_done)
int_status_o[`INT_DATA_CC] <= 1;
end
end
end
endcase
if (int_status_rst_i)
int_status_o<=0;
end
end
endmodule