98 lines
3.4 KiB
Verilog
98 lines
3.4 KiB
Verilog
//-----------------------------------------------------
|
|
// Design Name : General Purpose I/Os
|
|
// File Name : gpio.v
|
|
// Coder : Xifan TANG
|
|
//-----------------------------------------------------
|
|
|
|
//-----------------------------------------------------
|
|
// Function : A minimum general purpose I/O
|
|
//-----------------------------------------------------
|
|
module GPIO (
|
|
input A, // Data output
|
|
output Y, // Data input
|
|
inout PAD, // bi-directional pad
|
|
input DIR // direction control
|
|
);
|
|
//----- when direction enabled, the signal is propagated from PAD to data input
|
|
assign Y = DIR ? PAD : 1'bz;
|
|
//----- when direction is disabled, the signal is propagated from data out to pad
|
|
assign PAD = DIR ? 1'bz : A;
|
|
endmodule
|
|
|
|
//-----------------------------------------------------
|
|
// Function : A minimum general purpose I/O with config_done signal
|
|
// which can block signals during configuration phase
|
|
//-----------------------------------------------------
|
|
module GPIO (
|
|
input CONFIG_DONE, // Control signal to block signals
|
|
input A, // Data output
|
|
output Y, // Data input
|
|
inout PAD, // bi-directional pad
|
|
input DIR // direction control
|
|
);
|
|
//----- when direction enabled, the signal is propagated from PAD to data input
|
|
assign Y = CONFIG_DONE ? (DIR ? PAD : 1'bz) : 1'bz;
|
|
//----- when direction is disabled, the signal is propagated from data out to pad
|
|
assign PAD = CONFIG_DONE ? (DIR ? 1'bz : A) : 1'bz;
|
|
endmodule
|
|
|
|
|
|
//-----------------------------------------------------
|
|
// Function : A minimum input pad
|
|
//-----------------------------------------------------
|
|
module GPIN (
|
|
inout A, // External PAD signal
|
|
output Y // Data input
|
|
);
|
|
assign Y = A;
|
|
endmodule
|
|
|
|
//-----------------------------------------------------
|
|
// Function : A minimum output pad
|
|
//-----------------------------------------------------
|
|
module GPOUT (
|
|
inout Y, // External PAD signal
|
|
input A // Data output
|
|
);
|
|
assign Y = A;
|
|
endmodule
|
|
|
|
//-----------------------------------------------------
|
|
// Function : A minimum embedded I/O
|
|
// just an overlay to interface other components
|
|
//-----------------------------------------------------
|
|
module EMBEDDED_IO (
|
|
input SOC_IN, // Input to drive the inpad signal
|
|
output SOC_OUT, // Output the outpad signal
|
|
output SOC_DIR, // Output the directionality
|
|
output FPGA_IN, // Input data to FPGA
|
|
input FPGA_OUT, // Output data from FPGA
|
|
input FPGA_DIR // direction control
|
|
);
|
|
|
|
assign FPGA_IN = SOC_IN;
|
|
assign SOC_OUT = FPGA_OUT;
|
|
assign SOC_DIR = FPGA_DIR;
|
|
endmodule
|
|
|
|
//-----------------------------------------------------
|
|
// Function : An embedded I/O with an protection circuit
|
|
// which can force the I/O in input mode
|
|
// The enable signal IO_ISOL_N is active-low
|
|
//-----------------------------------------------------
|
|
module EMBEDDED_IO_ISOLN (
|
|
input SOC_IN, // Input to drive the inpad signal
|
|
output SOC_OUT, // Output the outpad signal
|
|
output SOC_DIR, // Output the directionality
|
|
output FPGA_IN, // Input data to FPGA
|
|
input FPGA_OUT, // Output data from FPGA
|
|
input FPGA_DIR, // direction control
|
|
input IO_ISOL_N // Active-low signal to set the I/O in input mode
|
|
);
|
|
|
|
assign FPGA_IN = IO_ISOL_N ? SOC_IN : 1'bz;
|
|
assign SOC_OUT = IO_ISOL_N ? FPGA_OUT : 1'bz;
|
|
// Direction signal is set to logic '0' when in input mode
|
|
assign SOC_DIR = IO_ISOL_N ? FPGA_DIR : 1'b0;
|
|
endmodule
|