OpenFPGA/docs/source/arch_lang/circuit_model_examples.rst

600 lines
24 KiB
ReStructuredText

Circuit model examples
======================
The nexts subsections are dedicated to detailed examples of each circuit model type. Through these examples any configuration of any type will be illustrated.
Inverters and Buffers
---------------------
.. code-block:: xml
<circuit_model type="inv_buf" name="string" prefix="string" netlist="string" is_default="int">
<design_technology type="cmos" topology="string" size="int" tapered="off"/>
<port type="input" prefix="string" size="int"/>
<port type="output" prefix="string" size="int"/>
</circuit_model>
.. note:: customized SPICE netlists are not currently supported for inverters and buffers.
* design_technology:
* **topology:** [inverter|buffer]. Specify the type of this component, can be either an inverter or a buffer.
* **size:** Specify the driving strength of inverter/buffer. For a buffer, the size is the driving strength of the inverter at the second level. We consider a two-level structure for a buffer here. The support for multi-level structure of a buffer will be introduced in the tapered options.
* **tapered:** [on|off]. Define if the buffer is a tapered (multi-level) buffer. *If "on" the following parameter are required.*
* **tap_drive_level:** Define the number of levels of a tapered buffer. This parameter is valid only when tapered is turned on.
* **f_per_stage:** Define the ratio of driving strength between the levels of a tapered driver. This parameter is valid only when tapered is turned on. Default value is 4.
**Inverter x1 example**
:numref:`fig_inv1` is the inverter symbol depicted in this example.
.. _fig_inv1:
.. figure:: ./figures/Inverter_1.png
:scale: 100%
:alt: classical inverter x1 symbol
Classical inverter x1 symbol.
The XML code describing this inverter is:
.. code-block:: xml
<circuit_model type="inv_buf" name="inv1x" prefix="inv1x">
<design_technology type="cmos" topology="inverter" size="1"/>
<port type="input" prefix="in" size="1"/>
<port type="output" prefix="out" size="1"/>
</circuit_model>
This example shows:
* The topology chose as inverter
* Size of 1 for the output strength
* The tapered parameter is not declared and is off by default
**Buffer x2 example**
:numref:`fig_buff` is the buffer symbol depicted in this example.
.. _fig_buff:
.. figure:: ./figures/Buffer.png
:scale: 100%
:alt: buffer symbol composed by 2 inverter, its output strength equal 2
Buffer made by two inverter, with an output strength of 2.
The XML code describing this buffer is:
.. code-block:: xml
<circuit_model type="inv_buf" name="buf2" prefix="buf2">
<design_technology type="cmos" topology="buffer" size="2"/>
<port type="input" prefix="in" size="1"/>
<port type="output" prefix="out" size="1"/>
</circuit_model>
This example shows:
* The topology chose as buffer
* Size of 2 for the output strength
* The tapered parameter is not declared and is off by default
**Tapered inverter x16 example**
:numref:`fig_invtap4` is the tapered inverter symbol depicted this example.
.. _fig_invtap4:
.. figure:: ./figures/Tapered_inverter.png
:scale: 100%
:alt: tapered inverter composed by 3 inverter for an output strength = 16
Inverter with high output strength made by 3 stage of inverter.
The XML code describing this inverter is:
.. code-block:: xml
<circuit_model type="inv_buf" name="tapdrive4" prefix="tapdrive4">
<design_technology type="cmos" topology=”inverter" size="1" tapered="on" tap_drive_level="3"
f_per_stage="4"/>
<port type="input" prefix="in" size="1"/>
<port type="output" prefix="out" size="1"/>
</circuit_model>
This example shows:
* The topology chose as inverter
* Size of 1 for the first stage output strength
* The tapered parameter is on. Then the required sub parameters are declared
* The number of stage is set to 3 by tap_drive_level
* f_per_stage is set to 4. Then 2nd stage output strength is 4* the 1st stage output strength (so 4*1 = 4) and the 3rd stage output strength is 4* the 2nd stage output strength (so 4*4 = 16).
Pass-gate Logic
---------------
.. code-block:: xml
<circuit_model type="pass_gate" name="string" prefix="string" netlist="string" is_default="int">
<design_technology type="cmos" topology="string" nmos_size="int" pmos_size="int"/>
<input_buffer exist="string" circuit_model_name="string" />
<output_buffer exist="string" circuit_model_name="string" />
<port type="input" prefix="string" size="int"/>
<port type="output" prefix="string" size="int"/>
</circuit_model>
.. note:: customized SPICE netlists are not currently supported for pass-gate logics.
* design_technology:
* **topology:** [transmission_gate|pass_transistor]. The transmission gate consists of a NMOS transistor and a PMOS transistor. The pass transistor consists of a NMOS transistor.
* **nmos_size:** the size of NMOS transistor in a transmission gate or pass_transistor, expressed in terms of the min_width defined in XML node <transistors>.
* **pmos_size:** the size of PMOS transistor in a transmission gate, expressed in terms of the min_width defined in XML node <transistors>.
**Transmission-gate example**
:numref:`fig_passgate` is the pass-gate symbol depicted in this example.
.. _fig_passgate:
.. figure:: ./figures/pass-gate.png
:scale: 60%
:alt: pmos and nmos transistortors forming a pass-gate
Pass-gate made by pmos ans nmos association.
The XML code describing this pass-gate is:
.. code-block:: xml
<circuit_model type="pass_gate" name="tgate" prefix="tgate">
<design_technology type="cmos" topology="transmission_gate"/>
<port type="input" prefix="in" size="1"/>
<port type="input" prefix="sram" size="1"/>
<port type="input" prefix="sramb" size="1"/>
<port type="output" prefix="out" size="1"/>
</circuit_model>
This example shows:
* Topology is **transmission_gate**, which means the component need entries for each transistor gate (pmos and nmos)
* 3 inputs considered, 1 for signal and 2 to control the transistors gates
* No input or output buffer used, these parameters can be uninitialized
**Pass-transistor example**
:numref:`fig_passtran` is the pass-gate symbol depicted in this example.
.. _fig_passtran:
.. figure:: ./figures/pass_transistor.png
:scale: 50%
:alt: nmos transistortor forming a pass-gate
Pass-gate made by a nmos transistor.
The XML code describing this pass-gate is:
.. code-block:: xml
<circuit_model type="pass_gate" name="t_pass" prefix="t_pass">
<design_technology type="cmos" topology="pass_transistor"/>
<port type="input" prefix="in" size="1"/>
<port type="input" prefix="sram" size="1"/>
<port type="output" prefix="out" size="1"/>
</circuit_model>
This example shows:
* Topology is **pass_transistor**, which means the component need an entry for the transistor gate (nmos)
* 2 inputs considered, 1 for signal and 1 to control the transistor gate
* No input or output buffer used, these parameters can be uninitialized
SRAMs
-----
.. code-block:: xml
<circuit_model type="sram" name="string" prefix="string" netlist="string"/>
<design_technology type="cmos"/>
<input_buffer exist="string" circuit_model_name="string"/>
<output_buffer exist="string" circuit_model_name="string"/>
<port type="input" prefix="string" size="int"/>
<port type="output" prefix="string" size="int"/>
</circuit_model>
.. note:: The circuit designs of SRAMs are highly dependent on the technology node and well optimized by engineers. Therefore, FPGA-SPICE requires users to provide their customized SRAM SPICE/Verilog netlists. A sample SPICE netlist of SRAM can be found in the directory SpiceNetlists in the released package. FPGA-SPICE assumes that all the LUTs and MUXes employ the SRAM circuit design. Therefore, currently only one SRAM type is allowed to be defined.
.. note:: The information of input and output buffer should be clearly specified according to the customized SPICE netlist! The existence of input/output buffers will influence the decision in creating testbenches, which may leads to larger errors in power analysis.
.. note:: The support SRAM modules should have a BL and a WL when the memory-bank-style configuration circuit is declared. Note that the WL should be the write/read enable signal, while BL is the data input.
Multiplexers
------------
.. code-block:: xml
<circuit_model type="mux" name="string" prefix="string" is_default="int">
<design_technology type="string" structure="string" num_level="int" ron="float" roff="float"
prog_transistor_size="float"/>
<input_buffer exist="string" circuit_model_name="string"/>
<output_buffer exist="string" circuit_model_name="string"/>
<pass_gate_logic type="string" circuit_model_name="string"/>
<port type="input" prefix="string" size="int"/>
<port type="output" prefix="string" size="int"/>
<port type="sram" prefix="string" size="int"/>
</circuit_model>
.. note:: customized SPICE netlists are not currently supported for multiplexers.
* design_technology:
* **structure:** can be [tree|multi-level|one-level]. The structure options are valid for SRAM-based multiplexers. For RRAM-based multiplexers, currently we only support the circuit design in [5]. If *multi-level* the following parameter is required:
* **num_level:** specify the number of levels when multi-level structure is selected, only.
* **prog_transistor_size:** valid only when the type of design technology is rram. Specify the size of programming transistors used in the RRAM-based multiplexer, we use only n-type transistor and the size should be expressed in terms of the min_width defined in XML node <transistors>.
* If type of design technology is **rram**, then the following parameters are required:
* **ron:** valid only when the type of design technology is rram. Specify the on-resistance of the RRAM device used in the RRAM-based multiplexer.
* **roff:** valid only when the type of design technology is rram. Specify the off-resistance of the RRAM device used in the RRAM-based multiplexer.
* port: for a multiplexer, the three types of ports, input, output and sram should be defined.
**Mux 1 level example**
:numref:`fig_mux1` illustrates an example of multiplexer modelling, which consists of input/output buffers and a transmission-gate-based tree structure.
.. _fig_mux1:
.. figure:: ./figures/mux1lvl.png
:scale: 60%
:alt: Detailed one level Multiplexer
An example of a one level multiplexer with transistor-level design parameters
The code describing this Multiplexer is:
.. code-block:: xml
<circuit_model type="mux" name="mux_1level" prefix="mux_1level">
<design_technology type="cmos" structure="one-level"/>
<input_buffer exist="on" circuit_model_name="inv1x"/>
<output_buffer exist="on" circuit_model_name="tapbuf4"/>
<pass_gate_logic circuit_model_name="tgate"/>
<port type="input" prefix="in" size="4"/>
<port type="output" prefix="out" size="1"/>
<port type="sram" prefix="sram" size="4"/>
</circuit_model>
**This example shows:**
* Each circuit model composing the Multiplexer
* The possibility to select the input or output buffers
* The possibility to select the pass-gate inside the Mux.
**Mux-tree example**
:numref:`fig_mux` illustrates an example of multiplexer modelling, which consists of input/output buffers and a transmission-gate-based tree structure.
.. _fig_mux:
.. figure:: ./figures/mux.png
:scale: 100%
:alt: Examples of Mux-tree
An example of a tree-like multiplexer with transistor-level design parameters
If we arbitrarily fix the number of Mux entries at 4, the following code could illustrate (a):
.. code-block:: xml
<circuit_model type="mux" name="mux_tree" prefix="mux_tree">
<design_technology type="cmos" structure="tree"/>
<input_buffer exist="on" circuit_model_name="inv1x"/>
<output_buffer exist="on" circuit_model_name="tapdrive4"/>
<pass_gate_logic circuit_model_name="tgate"/>
<port type="input" prefix="in" size="4"/>
<port type="output" prefix="out" size="1"/>
<port type="sram" prefix="sram" size="3"/>
</circuit_model>
**This example shows:**
* The tree topology, 4 entries split in 2 2-to-1 Muxes then another one make the final selection.
* The possibility to select the input or output buffers
* The number of entries parametrized by *size* in input port-type.
Look-Up Tables
--------------
.. code-block:: xml
<circuit_model type="lut" name="string" prefix="string" is_default="int" netlist="string"/>
<design_technology type="cmos"/>
<lut_input_buffer exist="string" circuit_model_name="string"/>
<input_buffer exist="string" circuit_model_name="string"/>
<output_buffer exist="string" circuit_model_name="string"/>
<pass_gate_logic type="string" circuit_model_name="string"/>
<port type="input" prefix="string" size="int"/>
<port type="output" prefix="string" size="int"/>
<port type="sram" prefix="string" size="int"/>
</circuit_model>
.. note:: The SPICE netlists of LUT can be auto-generated or customized.
The auto-generated LUTs are based on a tree-like multiplexer, whose gates of the transistors are used as the inputs of LUTs and the drains/sources of the transistors are used for configurable memories (SRAMs).
The LUT provided in customized SPICE netlist should have the same decoding methodology as the traditional LUT.
Additional design parameters for LUTs:
* **lut_input_buffer:** Specify the buffer for the inputs of a LUT (gates of the internal multiplexer).
Instructions of defining design parameters:
* **input_buffer:** Specify the buffer/inverter that connects the SRAM outputs to the inputs of multiplexer.
* **pass_gate_logic:** Specify the pass-gates of the internal multiplexer, the same as the multiplexers.
* **port:** three types of ports (input, output and sram) should be defined. If the user provides an customized SPICE netlist, the bandwidth of ports should be defined to the same as the SPICE netlist.
**LUT example**
:numref:`fig_lut` illustrates an example of LUT modeling, which consists of input/output buffers and a transmission-gate-based tree structure.
.. _fig_lut:
.. figure:: ./figures/lut.png
:scale: 100%
:alt: Detailed LUT composition
An example of a LUT with transistor-level design parameters.
The code describing this LUT is:
.. code-block:: xml
<circuit_model type="lut" name="lut6" prefix="lut6">
<input_buffer exist="on" circuit_model="inv1x"/>
<output_buffer exist="on" circuit_model_name="inv1x"/>
<lut_input_buffer exist="on" circuit_model_name="buf2"/>
<pass_gate_logic circuit_model_name="tgate"/>
<port type="input" prefix="in" size="6"/>
<port type="output" prefix="out" size="1"/>
<port type="sram" prefix="sram" size="64"/>
</circuit_model>
**This example shows:**
* The difference between *input_buffer* and *lut_input_buffer*.
* How each blocks is defined
Flip-Flops
----------
.. code-block:: xml
<circuit_model type="ff" name="string" prefix="string" netlist="string"/>
<design_technology type="cmos"/>
<input_buffer exist="string" circuit_model_name="string"/>
<output_buffer exist="string" circuit_model_name="string"/>
<port type="input" prefix="string" size="int"/>
<port type="output" prefix="string" size="int"/>
<port type="clock" prefix="string" size="int"/>
</circuit_model>
.. note:: The circuit designs of flip-flops are highly dependent on the technology node and well optimized by engineers. Therefore, FPGA-SPICE requires users to provide their customized FF SPICE/Verilog netlists. A sample SPICE netlist of FF can be found in the directory SpiceNetlists in the released package.
The information of input and output buffer should be clearly specified according to the customized SPICE netlist! The existence of input/output buffers will influence the decision in creating testbenches, which may leads to larger errors in power analysis.
FPGA-SPICE currently support only one clock domain in the FPGA. Therefore there should be only one clock port to be defined and the size of the clock port should be 1.
Instructions of defining design parameters:
* **circuit_model type:** can be ff or scff. FF is typical Flip-Flop, SCFF is Scan-Chain Flip-Flop
* **port:** three types of ports (input, output and clock) should be defined. If the user provides a customized SPICE netlist, the bandwidth of ports should be defined to the same as the SPICE netlist.
**FF example**
:numref:`fig_ff` illustrates an example of LUT modeling, which consists of input/output buffers and a transmission-gate-based tree structure.
.. _fig_ff:
.. figure:: ./figures/FF.png
:scale: 100%
:alt: FF symbol
An example of classical Flip-Flop.
The code describing this FF is:
.. code-block:: xml
<circuit_model type="ff" name="dff" prefix="dff" verilog_netlist="ff.v">
<port type="input" prefix="D" size="1"/>
<port type="input" prefix="Set" size="1" is_global="true"/>
<port type="input" prefix="Reset" size="1" is_global="true"/>
<port type="output" prefix="Q" size="1"/>
<port type="clock" prefix="clk" size="1" is_global="true"/>
</circuit_model>
**This example shows:**
* Circuit model type as ff
* The verilog netlist file associated to this component *ff.v*
* 3 ports, *Set*, *Reset* and *clk*, defined as global
**SCFF example**
:numref:`fig_scff` illustrates an example of LUT modeling, which consists of input/output buffers and a transmission-gate-based tree structure.
.. _fig_scff:
.. figure:: ./figures/scff.png
:scale: 100%
:alt: SCFF symbol
An example of a Scan-Chain Flip-Flop.
The code describing this FF is:
.. code-block:: xml
<circuit_model type="scff" name="scff" prefix="scff" verilog_netlist="scff.v">
<port type="input" prefix="D" size="1"/>
<port type="output" prefix="Q" size="2"/>
<port type="clock" prefix="clk" size="1" is_global="true"/>
</circuit_model>
**This example shows:**
* Circuit model type as scff
* The verilog netlist file associated to this component *scff.v*
* 1 port, *clk*, defined as global
Hard Logics
-----------
.. code-block:: xml
<circuit_model type="hardlogic" name="string" prefix="string" netlist="string"/>
<design_technology type="cmos"/>
<input_buffer exist="string" circuit_model_name="string"/>
<output_buffer exist="string" circuit_model_name="string"/>
<port type="input" prefix="string" size="int"/>
<port type="output" prefix="string" size="int"/>
</circuit_model>
.. note:: Hard logics are defined for non-configurable resources in FPGA architectures, such as adders, multipliers and RAM blocks.
Their circuit designs are highly dependent on the technology node and well optimized by engineers.
As more functional units are included in FPGA architecture, it is impossible to auto-generate these functional units [3].
Therefore, FPGA-SPICE requires users to provide their customized SPICE netlists. A sample SPICE netlist of a 1-bit adder can be found in the directory SpiceNetlists in the released package.
The information of input and output buffer should be clearly specified according to the customized SPICE netlist! The existence of input/output buffers will influence the decision in creating testbenches, which may leads to larger errors in power analysis.
Instructions of defining design parameters:
* **port:** two types of ports (input and output) should be defined. If the user provides a user-defined SPICE netlist, the bandwidth of ports should be defined to the same as the SPICE netlist.
Routing Wire Segments
---------------------
FPGA-SPICE provides two types of SPICE models for the wire segments in FPGA architecture:
* One type is called **wire**, which targets the local wires inside the logic blocks. The wire has one input and one output, directly connecting the output of a driver and the input of the downstream unit, respectively
* The other type is called **chan_wire**, especially targeting the channel wires. The channel wires have one input and two outputs, one of which is connected to the inputs of Connection Boxes while the other is connected to the inputs of Switch Boxes. Two outputs are created because from the view of layout, the inputs of Connection Boxes are typically connected to the middle point of channel wires, which has less parasitic resistances and capacitances than connected to the ending point.
.. code-block:: xml
<circuit_model type="string" name="string" prefix="string" netlist="string"/>
<design_technology type="cmos"/>
<input_buffer exist="string" circuit_model_name="string"/>
<output_buffer exist="string" circuit_model_name="string"/>
<port type="input" prefix="string" size="int"/>
<port type="output" prefix="string" size="int"/>
<wire_param model_type="string" res_val="float" cap_val="float" level="int"/>
</circuit_model>
.. note:: FPGA-SPICE can auto-generate the SPICE model for wires while also allows users to provide their customized SPICE netlists.
The information of input and output buffer should be clearly specified according to the customized netlist! The existence of input/output buffers will influence the decision in creating testbenches, which may leads to larger errors in power analysis.
Instructions of defining design parameters:
* **type:** can be [wire|chan_wire]. The SPICE model wire targets the local wire inside the logic block while the chan_wire targets the channel wires in global routing.
* **port:** two types of ports (input and output) should be defined. If the user provides an customized SPICE netlist, the bandwidth of ports should be defined to the same as the SPICE netlist.
* **wire_param:**
* **model_type:** can be [pi|T], corresponding to the π-type and T-type RC wire models.
* **res_val:** specify the total resistance of the wire
* **cap_val:** specify the total capacitance of the wire.
* **level:** specify the number of levels of the RC wire model.
**Chan-Wire example**
:numref:`fig_wire` depicts the modeling for a length-2 channel wire.
.. _fig_wire:
.. figure:: ./figures/wire.png
:scale: 100%
:alt: map to buried treasure
An example of a length-2 channel wire modeling
The code describing this wire is:
.. code-block:: xml
<circuit_model type="chan_wire" name="segment0" prefix="chan_wire"/>
<design_technology type="cmos"/>
<port type="input" prefix="mux_out" size="1"/>
<port type="output" prefix="cb_sb" size="2"/>
<wire_param model_type="pi" res_val="103.84" cap_val="13.80e-15" level="1"/>
</circuit_model>
**This example shows**
* How to use the *wire_param* for a π-type RC wire model
* How to use this circuit_model to auto-generate the SPICE netlist
I/O pads
--------
.. code-block:: xml
<circuit_model type="iopads" name="string" prefix="string" netlist="string"/>
<design_technology type="cmos"/>
<input_buffer exist="string" circuit_model_name="string"/>
<output_buffer exist="string" circuit_model_name="string"/>
<port type="input" prefix="string" size="int"/>
<port type="output" prefix="string" size="int"/>
<port type="sram" prefix="string" size="int" mode_select="true|false"
circuit_model_name="string" default_val="int"/>
</circuit_model>
.. note:: The circuit designs of I/O pads are highly dependent on the technology node and well optimized by engineers.
Therefore, FPGA-SPICE requires users to provide their customized SPICE/Verilog netlists. A sample SPICE netlist of an I/O pad can be found in the directory SpiceNetlists in the released package.
The information of input and output buffer should be clearly specified according to the customized netlist! The existence of input/output buffers will influence the decision in creating testbenches, which may leads to larger errors in power analysis.
Instructions of defining design parameters:
* **port:** two types of ports (input and output) should be defined. If the user provides a user-defined SPICE netlist, the bandwidth of ports should be defined to the same as the SPICE netlist.
**IO-pad example**
:numref:`fig_iopad` depicts an IO-Pad.
.. _fig_iopad:
.. figure:: ./figures/iopad.png
:scale: 100%
:alt: IO-Pad symbol
An example of an IO-Pad
The code describing this IO-Pad is:
.. code-block:: xml
<circuit_model type="iopad" name="iopad" prefix="iopad" verilog_netlist="io.v">
<port type="inout" prefix="pad" size="1"/>
<port type="sram" prefix="dir" size="1" circuit_model_name="scff"/>
<port type="input" prefix="data_in" size="1"/>
<port type="input" prefix="zin" size="1" is_global="true"/>
<port type="output" prefix="data out" size="1"/>
</circuit_model>
**This example shows**
* The association of the verilog netlist file *io.v*
* The inout pad port_type, which means as inout as output.
* The instantiation of a SCFF as sram