59 lines
3.7 KiB
ReStructuredText
59 lines
3.7 KiB
ReStructuredText
Command-line Options
|
||
~~~~~~~~~~~~~~~~~~~~
|
||
All the command line options of FPGA-SPICE can be shown by calling the help menu of VPR. Here are all the FPGA-SPICE-related options that you can find:
|
||
|
||
FPGA-SPICE Supported Options::
|
||
|
||
--fpga_spice
|
||
--fpga_spice_dir <directory_path_output_spice_netlists>
|
||
--fpga_spice_print_top_testbench
|
||
--fpga_spice_print_lut_testbench
|
||
--fpga_spice_print_hardlogic_testbench
|
||
--fpga_spice_print_pb_mux_testbench
|
||
--fpga_spice_print_cb_mux_testbench
|
||
--fpga_spice_print_sb_mux_testbench
|
||
--fpga_spice_print_cb_testbench
|
||
--fpga_spice_print_sb_testbench
|
||
--fpga_spice_print_grid_testbench
|
||
--fpga_spice_rename_illegal_port
|
||
--fpga_spice_signal_density_weight <float>
|
||
--fpga_spice_sim_window_size <float>
|
||
--fpga_spice_leakage_only
|
||
--fpga_spice_parasitic_net_estimation_off
|
||
--fpga_spice_testbench_load_extraction_off
|
||
--fpga_spice_sim_mt_num <int>
|
||
|
||
.. note:: FPGA-SPICE requires the input of activity estimation results (\*.act file) from ACE2.
|
||
Remember to use the option --activity_file <act_file> to read the activity file.
|
||
|
||
.. note:: To dump full-chip-level testbenches, the option –-fpga_spice_print_top_testbench should be enabled.
|
||
|
||
.. note:: To dump grid-level testbenches, the options -- fpga_spice_print_grid_testbench, -- fpga_spice_print_cb_testbench and -- fpga_spice_print_sb_testbench should be enabled.
|
||
|
||
.. note:: To dump component-level testbenches, the options –fpga_spice_print_lut_testbench, --fpga_spice_print_hardlogic_testbench, --fpga_spice_print_pb_mux_testbench, --fpga_spice_print_cb_mux_testbench and --fpga_spice_print_sb_mux_testbench should be enabled.
|
||
|
||
.. csv-table:: Command-line Options of FPGA-SPICE
|
||
:header: "Command Options", "Description"
|
||
:widths: 15, 20
|
||
|
||
"--fpga_spice", "Turn on the FPGA-SPICE."
|
||
"--fpga_spice_dir <dir_path>", "Specify the directory that all the SPICE netlists will be outputted to. <dir_path> is the destination directory."
|
||
"--fpga_spice_print_top_testbench", "Print the full-chip-level testbench for the FPGA."
|
||
"--fpga_spice_print_lut_testbench", "Print the testbenches for all the LUTs."
|
||
"--fpga_spice_print_hardlogic_testbench", "Print the test benches for all the hard logic."
|
||
"--fpga_spice_print_pb_mux_testbench", "Print the testbenches for all the multiplexers in the logic blocks."
|
||
"--fpga_spice_print_cb_mux_testbench", "Print the testbenches for all the multiplexers in Connection Boxes."
|
||
"-- fpga_spice_print_sb_mux_testbench", "Print the testbenches for all the multiplexers in Switch Blocks."
|
||
"--fpga_spice_print_cb_testbench", "Print the testbenches for all the CBs."
|
||
"--fpga_spice_print_sb_testbench", "Print the testbenches for all the SBs."
|
||
"--fpga_spice_print_grid_testbench", "Print the testbenches for the logic blocks."
|
||
"--fpga_spice_rename_illegal_port", "Rename illegal port names"
|
||
"--fpga_spice_signal_density_weight <float>", "Set the weight of signal density."
|
||
"--fpga_spice_sim_window_size <float>", "Set the window size in determining the number of clock cycles in simulation."
|
||
"--fpga_spice_leakage_only", "FPGA-SPICE conduct power analysis on the leakage power only."
|
||
"--fpga_spice_parasitic_net_estimation_off", "Turn off the parasitic net estimation technique."
|
||
"--fpga_spice_testbench_load_extraction_off", "Turn off the load effect on net estimation technique."
|
||
"--fpga_spice_sim_mt_num <int>", "Set the number of multi-thread used in simulation"
|
||
|
||
.. note:: The parasitic net estimation technique is used to analyze the parasitic net activities which improve the accuracy of power analysis. When turned off, the errors between the full-chip-level and grid/component-level testbenches will increase."
|