riscv
/
OpenFPGA
mirror of https://github.com/lnis-uofu/OpenFPGA.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenFPGA/vpr7_x2p/vpr/SRC/route/rr_graph2.c

2366 lines
75 KiB
C
Executable File
Raw Blame History

#include <stdio.h>
#include <assert.h>
#include "util.h"
#include "vpr_types.h"
#include "globals.h"
#include "rr_graph_util.h"
#include "rr_graph2.h"
#include "rr_graph_sbox.h"
#include "read_xml_arch_file.h"
/*mrFPGA: Xifan TANG */
#include "mrfpga_globals.h"
#include "mrfpga_api.h"
/* end */
#define ALLOW_SWITCH_OFF
/* WMF: May 07 I put this feature in, but on May 09 in my testing phase
* I found that for Wilton, this feature is bad, since Wilton is already doing
* a reverse. */
#define ENABLE_REVERSE 0
#define SAME_TRACK -5
#define UN_SET -1
/* Variables below are the global variables shared only amongst the rr_graph *
************************************ routines. ******************************/
/* Used to keep my own list of free linked integers, for speed reasons. */
t_linked_edge *free_edge_list_head = NULL;
/*************************** Variables local to this module *****************/
/* Two arrays below give the rr_node_index of the channel segment at *
* (i,j,track) for fast index lookup. */
/* UDSD Modifications by WMF Begin */
/* The sblock_pattern_init_mux_lookup contains the assignment of incoming
* wires to muxes. More specifically, it only contains the assignment of
* M-to-N cases. WMF_BETTER_COMMENTS */
/* UDSD MOdifications by WMF End */
/************************** Subroutines local to this module ****************/
static void get_switch_type(boolean is_from_sbox, boolean is_to_sbox,
short from_node_switch, short to_node_switch, short switch_types[2]);
static void load_chan_rr_indices(INP int nodes_per_chan, INP int chan_len,
INP int num_chans, INP t_rr_type type, INP t_seg_details * seg_details,
INOUTP int *index, INOUTP t_ivec *** indices);
static int get_bidir_track_to_chan_seg(INP struct s_ivec conn_tracks,
INP t_ivec *** L_rr_node_indices, INP int to_chan, INP int to_seg,
INP int to_sb, INP t_rr_type to_type, INP t_seg_details * seg_details,
INP boolean from_is_sbox, INP int from_switch,
INOUTP boolean * L_rr_edge_done,
INP enum e_directionality directionality,
INOUTP struct s_linked_edge **edge_list);
static int get_unidir_track_to_chan_seg(INP boolean is_end_sb,
INP int from_track, INP int to_chan, INP int to_seg, INP int to_sb,
INP t_rr_type to_type, INP int nodes_per_chan, INP int L_nx,
INP int L_ny, INP enum e_side from_side, INP enum e_side to_side,
INP int Fs_per_side, INP int *opin_mux_size,
INP short *****sblock_pattern, INP t_ivec *** L_rr_node_indices,
INP t_seg_details * seg_details, INOUTP boolean * L_rr_edge_done,
OUTP boolean * Fs_clipped, INOUTP struct s_linked_edge **edge_list);
static int vpr_to_phy_track(INP int itrack, INP int chan_num, INP int seg_num,
INP t_seg_details * seg_details,
INP enum e_directionality directionality);
static int *get_seg_track_counts(INP int num_sets, INP int num_seg_types,
INP t_segment_inf * segment_inf, INP boolean use_full_seg_groups);
static int *label_wire_muxes(INP int chan_num, INP int seg_num,
INP t_seg_details * seg_details, INP int max_len,
INP enum e_direction dir, INP int nodes_per_chan,
OUTP int *num_wire_muxes);
static int *label_wire_muxes_for_balance(INP int chan_num, INP int seg_num,
INP t_seg_details * seg_details, INP int max_len,
INP enum e_direction direction, INP int nodes_per_chan,
INP int *num_wire_muxes, INP t_rr_type chan_type,
INP int *opin_mux_size, INP t_ivec *** L_rr_node_indices);
static int *label_incoming_wires(INP int chan_num, INP int seg_num,
INP int sb_seg, INP t_seg_details * seg_details, INP int max_len,
INP enum e_direction dir, INP int nodes_per_chan,
OUTP int *num_incoming_wires, OUTP int *num_ending_wires);
static int find_label_of_track(int *wire_mux_on_track, int num_wire_muxes,
int from_track);
/* mrFPGA : Xifan TANG*/
/*
static int get_seg_to_seg(INP t_ivec*** L_rr_node_indices,
INP int to_chan,
INP int to_seg,
INP int track,
INP t_rr_type type,
INP t_seg_details* seg_details,
INOUTP struct s_linked_edge** edge_list);
*/
/* end */
/******************** Subroutine definitions *******************************/
/* This assigns tracks (individually or pairs) to segment types.
* It tries to match requested ratio. If use_full_seg_groups is
* true, then segments are assigned only in multiples of their
* length. This is primarily used for making a tileable unidir
* layout. The effect of using this is that the number of tracks
* requested will not always be met and the result will sometimes
* be over and sometimes under.
* The pattern when using use_full_seg_groups is to keep adding
* one group of the track type that wants the largest number of
* groups of tracks. Each time a group is assigned, the types
* demand is reduced by 1 unit. The process stops when we are
* no longer less than the requested number of tracks. As a final
* step, if we were closer to target before last more, undo it
* and end up with a result that uses fewer tracks than given. */
static int *
get_seg_track_counts(INP int num_sets, INP int num_seg_types,
INP t_segment_inf * segment_inf, INP boolean use_full_seg_groups) {
int *result;
double *demand;
int i, imax, freq_sum, assigned, size;
double scale, max, reduce;
result = (int *) my_malloc(sizeof(int) * num_seg_types);
demand = (double *) my_malloc(sizeof(double) * num_seg_types);
/* Scale factor so we can divide by any length
* and still use integers */
scale = 1;
freq_sum = 0;
for (i = 0; i < num_seg_types; ++i) {
scale *= segment_inf[i].length;
freq_sum += segment_inf[i].frequency;
}
reduce = scale * freq_sum;
/* Init assignments to 0 and set the demand values */
for (i = 0; i < num_seg_types; ++i) {
result[i] = 0;
demand[i] = scale * num_sets * segment_inf[i].frequency;
if (use_full_seg_groups) {
demand[i] /= segment_inf[i].length;
}
}
/* Keep assigning tracks until we use them up */
assigned = 0;
size = 0;
imax = 0;
while (assigned < num_sets) {
/* Find current maximum demand */
max = 0;
for (i = 0; i < num_seg_types; ++i) {
if (demand[i] > max) {
imax = i;
max = demand[i];
}
}
/* Assign tracks to the type and reduce the types demand */
size = (use_full_seg_groups ? segment_inf[imax].length : 1);
demand[imax] -= reduce;
result[imax] += size;
assigned += size;
}
/* Undo last assignment if we were closer to goal without it */
if ((assigned - num_sets) > (size / 2)) {
result[imax] -= size;
}
/* Free temps */
if (demand) {
free(demand);
demand = NULL;
}
/* This must be freed by caller */
return result;
}
t_seg_details *
alloc_and_load_seg_details(INOUTP int *nodes_per_chan, INP int max_len,
INP int num_seg_types, INP t_segment_inf * segment_inf,
INP boolean use_full_seg_groups, INP boolean is_global_graph,
INP enum e_directionality directionality) {
/* Allocates and loads the seg_details data structure. Max_len gives the *
* maximum length of a segment (dimension of array). The code below tries *
* to: *
* (1) stagger the start points of segments of the same type evenly; *
* (2) spread out the limited number of connection boxes or switch boxes *
* evenly along the length of a segment, starting at the segment ends; *
* (3) stagger the connection and switch boxes on different long lines, *
* as they will not be staggered by different segment start points. */
int i, cur_track, ntracks, itrack, length, j, index;
int wire_switch, opin_switch, fac, num_sets, tmp;
int group_start, first_track;
int *sets_per_seg_type = NULL;
t_seg_details *seg_details = NULL;
boolean longline;
/* Unidir tracks are assigned in pairs, and bidir tracks individually */
if (directionality == BI_DIRECTIONAL) {
fac = 1;
} else {
assert(directionality == UNI_DIRECTIONAL);
fac = 2;
}
assert(*nodes_per_chan % fac == 0);
/* Map segment type fractions and groupings to counts of tracks */
sets_per_seg_type = get_seg_track_counts((*nodes_per_chan / fac),
num_seg_types, segment_inf, use_full_seg_groups);
/* Count the number tracks actually assigned. */
tmp = 0;
for (i = 0; i < num_seg_types; ++i) {
tmp += sets_per_seg_type[i] * fac;
}
assert(use_full_seg_groups || (tmp == *nodes_per_chan));
*nodes_per_chan = tmp;
// Xifan TANG Note: Alloc segments
seg_details = (t_seg_details *) my_malloc(
*nodes_per_chan * sizeof(t_seg_details));
/* Setup the seg_details data */
cur_track = 0;
for (i = 0; i < num_seg_types; ++i) {
first_track = cur_track;
num_sets = sets_per_seg_type[i];
ntracks = fac * num_sets;
if (ntracks < 1) {
continue;
}
/* Avoid divide by 0 if ntracks */
longline = segment_inf[i].longline;
length = segment_inf[i].length;
if (longline) {
length = max_len;
}
// Xifan TANG Note: Set the input and output switches
wire_switch = segment_inf[i].wire_switch;
opin_switch = segment_inf[i].opin_switch;
/* Xifan TANG Note: I think it should be && not || in this assert,
* Uni-direcitonal routing architecture, wire_switch and opin_switch should be the same...
*/
//assert(
// (wire_switch == opin_switch) || (directionality != UNI_DIRECTIONAL));
/* END */
/* mrFPGA: Xifan TANG */
assert((wire_switch == opin_switch)
|| (directionality != UNI_DIRECTIONAL) || (is_mrFPGA) );
/* END */
/* Set up the tracks of same type */
group_start = 0;
for (itrack = 0; itrack < ntracks; itrack++) {
/* Remember the start track of the current wire group */
if ((itrack / fac) % length == 0 && (itrack % fac) == 0) {
group_start = cur_track;
}
seg_details[cur_track].length = length;
seg_details[cur_track].longline = longline;
/* Stagger the start points in for each track set. The
* pin mappings should be aware of this when chosing an
* intelligent way of connecting pins and tracks.
* cur_track is used as an offset so that extra tracks
* from different segment types are hopefully better
* balanced. */
/* Original VPR */
/* seg_details[cur_track].start = (cur_track / fac) % length + 1; */
/* end */
/* mrFPGA: Xifan TANG */
seg_details[cur_track].start = (cur_track / fac) % length + (is_stack ? 0 : 1);
/* end */
/* These properties are used for vpr_to_phy_track to determine
* * twisting of wires. */
seg_details[cur_track].group_start = group_start;
seg_details[cur_track].group_size =
std::min(ntracks + first_track - group_start,
length * fac);
assert(0 == seg_details[cur_track].group_size % fac);
if (0 == seg_details[cur_track].group_size) {
seg_details[cur_track].group_size = length * fac;
}
/* Setup the cb and sb patterns. Global route graphs can't depopulate cb and sb
* since this is a property of a detailed route. */
seg_details[cur_track].cb = (boolean *) my_malloc(
length * sizeof(boolean));
seg_details[cur_track].sb = (boolean *) my_malloc(
(length + 1) * sizeof(boolean));
for (j = 0; j < length; ++j) {
if (is_global_graph) {
seg_details[cur_track].cb[j] = TRUE;
} else {
index = j;
/* Rotate longline's so they vary across the FPGA */
if (longline) {
index = (index + itrack) % length;
}
/* Reverse the order for tracks going in DEC_DIRECTION */
if (itrack % fac == 1) {
index = (length - 1) - j;
}
/* Use the segment's pattern. */
index = j % segment_inf[i].cb_len;
seg_details[cur_track].cb[j] = segment_inf[i].cb[index];
}
}
for (j = 0; j < (length + 1); ++j) {
if (is_global_graph) {
seg_details[cur_track].sb[j] = TRUE;
} else {
index = j;
/* Rotate longline's so they vary across the FPGA */
if (longline) {
index = (index + itrack) % (length + 1);
}
/* Reverse the order for tracks going in DEC_DIRECTION */
if (itrack % fac == 1) {
index = ((length + 1) - 1) - j;
}
/* Use the segment's pattern. */
index = j % segment_inf[i].sb_len;
seg_details[cur_track].sb[j] = segment_inf[i].sb[index];
}
}
seg_details[cur_track].Rmetal = segment_inf[i].Rmetal;
seg_details[cur_track].Cmetal = segment_inf[i].Cmetal;
//seg_details[cur_track].Cmetal_per_m = segment_inf[i].Cmetal_per_m;
seg_details[cur_track].wire_switch = wire_switch;
seg_details[cur_track].opin_switch = opin_switch;
if (BI_DIRECTIONAL == directionality) {
seg_details[cur_track].direction = BI_DIRECTION;
} else {
assert(UNI_DIRECTIONAL == directionality);
seg_details[cur_track].direction =
(itrack % 2) ? DEC_DIRECTION : INC_DIRECTION;
}
switch (segment_inf[i].directionality) {
case UNI_DIRECTIONAL:
seg_details[cur_track].drivers = SINGLE;
break;
case BI_DIRECTIONAL:
seg_details[cur_track].drivers = MULTI_BUFFERED;
break;
}
seg_details[cur_track].index = i;
++cur_track;
}
} /* End for each segment type. */
/* free variables */
free(sets_per_seg_type);
return seg_details;
}
void free_seg_details(t_seg_details * seg_details, int nodes_per_chan) {
/* Frees all the memory allocated to an array of seg_details structures. */
int i;
for (i = 0; i < nodes_per_chan; i++) {
free(seg_details[i].cb);
free(seg_details[i].sb);
}
free(seg_details);
}
/* Dumps out an array of seg_details structures to file fname. Used only *
* for debugging. */
void dump_seg_details(t_seg_details * seg_details, int nodes_per_chan,
const char *fname) {
FILE *fp;
int i, j;
const char *drivers_names[] = { "multi_buffered", "single" };
const char *direction_names[] = { "inc_direction", "dec_direction",
"bi_direction" };
fp = my_fopen(fname, "w", 0);
for (i = 0; i < nodes_per_chan; i++) {
fprintf(fp, "Track: %d.\n", i);
fprintf(fp, "Length: %d, Start: %d, Long line: %d "
"wire_switch: %d opin_switch: %d.\n", seg_details[i].length,
seg_details[i].start, seg_details[i].longline,
seg_details[i].wire_switch, seg_details[i].opin_switch);
fprintf(fp, "Rmetal: %g Cmetal: %g\n", seg_details[i].Rmetal,
seg_details[i].Cmetal);
fprintf(fp, "Direction: %s Drivers: %s\n",
direction_names[seg_details[i].direction],
drivers_names[seg_details[i].drivers]);
fprintf(fp, "cb list: ");
for (j = 0; j < seg_details[i].length; j++)
fprintf(fp, "%d ", seg_details[i].cb[j]);
fprintf(fp, "\n");
fprintf(fp, "sb list: ");
for (j = 0; j <= seg_details[i].length; j++)
fprintf(fp, "%d ", seg_details[i].sb[j]);
fprintf(fp, "\n");
fprintf(fp, "\n");
}
fclose(fp);
}
/* Returns the segment number at which the segment this track lies on *
* started. */
int get_seg_start(INP t_seg_details * seg_details, INP int itrack,
INP int chan_num, INP int seg_num) {
int seg_start, length, start;
seg_start = 1;
if (FALSE == seg_details[itrack].longline) {
length = seg_details[itrack].length;
start = seg_details[itrack].start;
/* Start is guaranteed to be between 1 and length. Hence adding length to *
* the quantity in brackets below guarantees it will be nonnegative. */
/* Original VPR */
/* assert(start > 0); */
/* end */
/* mrFPGA: Xifan TANG */
assert(is_stack ? start >= 0: start > 0);
/* end */
assert(start <= length);
/* NOTE: Start points are staggered between different channels.
* The start point must stagger backwards as chan_num increases.
* Unidirectional routing expects this to allow the N-to-N
* assumption to be made with respect to ending wires in the core. */
/* mrFPGA: Xifan TANG */
seg_start = seg_num - (seg_num - (is_stack ? 1 : 0) + length + chan_num - start) % length;
seg_start = std::max(seg_start, is_stack ? 0 : 1);
/* end */
/* Original VPR */
/*
seg_start = seg_num - (seg_num + length + chan_num - start) % length;
if (seg_start < 1) {
seg_start = 1;
}
*/
/* end */
}
return seg_start;
}
int get_seg_end(INP t_seg_details * seg_details, INP int itrack, INP int istart,
INP int chan_num, INP int seg_max) {
int len, ofs, end, first_full;
len = seg_details[itrack].length;
ofs = seg_details[itrack].start;
/* Normal endpoint */
end = istart + len - 1;
/* If start is against edge it may have been clipped */
/* Original VPR*/
/* if (1 == istart) { */
/* end */
/* mrFPGA: Xifan TANG */
if ((is_stack ? 0 : 1) == istart) {
/* end */
/* If the (staggered) startpoint of first full wire wasn't
* also 1, we must be the clipped wire */
/* Original VPR*/
/* first_full = (len - (chan_num % len) + ofs - 1) % len + 1; */
/* end */
/* mrFPGA: Xifan TANG */
first_full = (len - (chan_num - (is_stack ? 1 : 0)) % len + ofs + (is_stack ? 1: 0) - 1) % len
+ (is_stack ? 0 : 1);
/* end */
/* Original VPR*/
/* if (first_full > 1) { */
/* end */
/* mrFPGA: Xifan TANG */
if (first_full > (is_stack ? 0 : 1)) {
/* end */
/* then we stop just before the first full seg */
end = first_full - 1;
}
}
/* Clip against far edge */
if (end > seg_max) {
end = seg_max;
}
return end;
}
/* Returns the number of tracks to which clb opin #ipin at (i,j) connects. *
* Also stores the nodes to which this pin connects in the linked list *
* pointed to by *edge_list_ptr. */
int get_bidir_opin_connections(INP int i, INP int j, INP int ipin,
INP struct s_linked_edge **edge_list, INP int *****opin_to_track_map,
INP int Fc, INP boolean * L_rr_edge_done,
INP t_ivec *** L_rr_node_indices, INP t_seg_details * seg_details) {
int iside, num_conn, ofs, tr_i, tr_j, chan, seg;
int to_track, to_switch, to_node, iconn;
int is_connected_track;
t_type_ptr type;
t_rr_type to_type;
type = grid[i][j].type;
ofs = grid[i][j].offset;
num_conn = 0;
/* [0..num_types-1][0..num_pins-1][0..height][0..3][0..Fc-1] */
for (iside = 0; iside < 4; iside++) {
/* Figure out coords of channel segment based on side */
tr_i = ((iside == LEFT) ? (i - 1) : i);
tr_j = ((iside == BOTTOM) ? (j - 1) : j);
to_type = ((iside == LEFT) || (iside == RIGHT)) ? CHANY : CHANX;
chan = ((to_type == CHANX) ? tr_j : tr_i);
seg = ((to_type == CHANX) ? tr_i : tr_j);
/* Don't connect where no tracks on fringes */
if ((tr_i < 0) || (tr_i > nx)) {
continue;
}
if ((tr_j < 0) || (tr_j > ny)) {
continue;
}
if ((CHANX == to_type) && (tr_i < 1)) {
continue;
}
if ((CHANY == to_type) && (tr_j < 1)) {
continue;
}
is_connected_track = FALSE;
/* Itterate of the opin to track connections */
for (iconn = 0; iconn < Fc; ++iconn) {
to_track = opin_to_track_map[type->index][ipin][ofs][iside][iconn];
/* Skip unconnected connections */
if (OPEN == to_track || is_connected_track) {
is_connected_track = TRUE;
assert(
OPEN == opin_to_track_map[type-> index][ipin][ofs][iside] [0]);
continue;
}
/* Only connect to wire if there is a CB */
if (is_cbox(chan, seg, to_track, seg_details, BI_DIRECTIONAL)) {
to_switch = seg_details[to_track].wire_switch;
to_node = get_rr_node_index(tr_i, tr_j, to_type, to_track,
L_rr_node_indices);
*edge_list = insert_in_edge_list(*edge_list, to_node,
to_switch);
L_rr_edge_done[to_node] = TRUE;
++num_conn;
}
}
}
return num_conn;
}
int get_unidir_opin_connections(INP int chan, INP int seg, INP int Fc,
INP t_rr_type chan_type, INP t_seg_details * seg_details,
INOUTP t_linked_edge ** edge_list_ptr, INOUTP int **Fc_ofs,
INOUTP boolean * L_rr_edge_done, INP int max_len,
INP int nodes_per_chan, INP t_ivec *** L_rr_node_indices,
OUTP boolean * Fc_clipped) {
/* Gets a linked list of Fc nodes to connect to in given
* chan seg. Fc_ofs is used for the for the opin staggering
* pattern. */
int *inc_muxes = NULL;
int *dec_muxes = NULL;
int num_inc_muxes, num_dec_muxes, iconn;
int inc_inode, dec_inode;
int inc_mux, dec_mux;
int inc_track, dec_track;
int x, y;
int num_edges;
*Fc_clipped = FALSE;
/* Fc is assigned in pairs so check it is even. */
assert(Fc % 2 == 0);
/* get_rr_node_indices needs x and y coords. */
/* Original VPR */
/*
x = ((CHANX == chan_type) ? seg : chan);
y = ((CHANX == chan_type) ? chan : seg);
*/
/* end */
/* mrFPGA : Xifan TANG */
x = (((is_stack ? CHANY : CHANX) == chan_type) ? seg : chan);
y = (((is_stack ? CHANY : CHANX) == chan_type) ? chan : seg);
/* end */
/* Get the lists of possible muxes. */
inc_muxes = label_wire_muxes(chan, seg, seg_details, max_len, INC_DIRECTION,
nodes_per_chan, &num_inc_muxes);
dec_muxes = label_wire_muxes(chan, seg, seg_details, max_len, DEC_DIRECTION,
nodes_per_chan, &num_dec_muxes);
/* Clip Fc to the number of muxes. */
if (((Fc / 2) > num_inc_muxes) || ((Fc / 2) > num_dec_muxes)) {
*Fc_clipped = TRUE;
Fc = 2 * std::min(num_inc_muxes, num_dec_muxes);
}
/* Assign tracks to meet Fc demand */
num_edges = 0;
for (iconn = 0; iconn < (Fc / 2); ++iconn) {
/* Figure of the next mux to use */
inc_mux = Fc_ofs[chan][seg] % num_inc_muxes;
dec_mux = Fc_ofs[chan][seg] % num_dec_muxes;
++Fc_ofs[chan][seg];
/* Figure out the track it corresponds to. */
inc_track = inc_muxes[inc_mux];
dec_track = dec_muxes[dec_mux];
/* Figure the inodes of those muxes */
inc_inode = get_rr_node_index(x, y, chan_type, inc_track,
L_rr_node_indices);
dec_inode = get_rr_node_index(x, y, chan_type, dec_track,
L_rr_node_indices);
/* Add to the list. */
if (FALSE == L_rr_edge_done[inc_inode]) {
L_rr_edge_done[inc_inode] = TRUE;
*edge_list_ptr = insert_in_edge_list(*edge_list_ptr, inc_inode,
seg_details[inc_track].opin_switch);
++num_edges;
}
if (FALSE == L_rr_edge_done[dec_inode]) {
L_rr_edge_done[dec_inode] = TRUE;
*edge_list_ptr = insert_in_edge_list(*edge_list_ptr, dec_inode,
seg_details[dec_track].opin_switch);
++num_edges;
}
}
if (inc_muxes) {
free(inc_muxes);
inc_muxes = NULL;
}
if (dec_muxes) {
free(dec_muxes);
dec_muxes = NULL;
}
return num_edges;
}
boolean is_cbox(INP int chan, INP int seg, INP int track,
INP t_seg_details * seg_details,
INP enum e_directionality directionality) {
int length, ofs, start_seg;
length = seg_details[track].length;
/* Make sure they gave us correct start */
start_seg = get_seg_start(seg_details, track, chan, seg);
ofs = seg - start_seg;
assert(ofs >= 0);
assert(ofs < length);
/* If unidir segment that is going backwards, we need to flip the ofs */
if (DEC_DIRECTION == seg_details[track].direction) {
ofs = (length - 1) - ofs;
}
return seg_details[track].cb[ofs];
}
static void load_chan_rr_indices(INP int nodes_per_chan, INP int chan_len,
INP int num_chans, INP t_rr_type type, INP t_seg_details * seg_details,
INOUTP int *index, INOUTP t_ivec *** indices) {
int chan, seg, track, start, inode;
indices[type] = (t_ivec **) my_malloc(sizeof(t_ivec *) * num_chans);
for (chan = 0; chan < num_chans; ++chan) {
indices[type][chan] = (t_ivec *) my_malloc(sizeof(t_ivec) * chan_len);
indices[type][chan][0].nelem = 0;
indices[type][chan][0].list = NULL;
/* Original VPR */
/* for (seg = 1; seg < chan_len; ++seg) { */
/* end */
/* mrFPGA: Xifan TANG */
for (seg = (is_stack ? 0 : 1); seg < chan_len; ++seg) {
/* end */
/* Alloc the track inode lookup list */
indices[type][chan][seg].nelem = nodes_per_chan;
indices[type][chan][seg].list = (int *) my_malloc(
sizeof(int) * nodes_per_chan);
for (track = 0; track < nodes_per_chan; ++track) {
indices[type][chan][seg].list[track] = OPEN;
}
}
}
/* Original VPR */
/*
for (chan = 0; chan < num_chans; ++chan) {
for (seg = 1; seg < chan_len; ++seg) {
*/
/* end */
/* mrFPGA: Xifan TANG */
for (chan = (is_stack ? 1 : 0); chan < num_chans; ++chan) {
for (seg = (is_stack ? 0 : 1); seg < chan_len; ++seg) {
/* end */
/* Assign an inode to the starts of tracks */
for (track = 0; track < indices[type][chan][seg].nelem; ++track) {
start = get_seg_start(seg_details, track, chan, seg);
/* Original VPR */
/* If the start of the wire doesn't have a inode,
* assign one to it. */
inode = indices[type][chan][start].list[track];
if (OPEN == inode) {
inode = *index;
++(*index);
indices[type][chan][start].list[track] = inode;
}
/* end */
/* Assign inode of start of wire to current position */
indices[type][chan][seg].list[track] = inode;
}
}
}
}
struct s_ivec ***
alloc_and_load_rr_node_indices(INP int nodes_per_chan, INP int L_nx,
INP int L_ny, INOUTP int *index, INP t_seg_details * seg_details) {
/* Allocates and loads all the structures needed for fast lookups of the *
* index of an rr_node. rr_node_indices is a matrix containing the index *
* of the *first* rr_node at a given (i,j) location. */
int i, j, k, ofs;
t_ivec ***indices;
t_ivec tmp;
t_type_ptr type;
/* Alloc the lookup table */
indices = (t_ivec ***) my_malloc(sizeof(t_ivec **) * NUM_RR_TYPES);
indices[IPIN] = (t_ivec **) my_malloc(sizeof(t_ivec *) * (L_nx + 2));
indices[SINK] = (t_ivec **) my_malloc(sizeof(t_ivec *) * (L_nx + 2));
for (i = 0; i <= (L_nx + 1); ++i) {
indices[IPIN][i] = (t_ivec *) my_malloc(sizeof(t_ivec) * (L_ny + 2));
indices[SINK][i] = (t_ivec *) my_malloc(sizeof(t_ivec) * (L_ny + 2));
for (j = 0; j <= (L_ny + 1); ++j) {
indices[IPIN][i][j].nelem = 0;
indices[IPIN][i][j].list = NULL;
indices[SINK][i][j].nelem = 0;
indices[SINK][i][j].list = NULL;
}
}
/* Count indices for block nodes */
for (i = 0; i <= (L_nx + 1); i++) {
for (j = 0; j <= (L_ny + 1); j++) {
ofs = grid[i][j].offset;
if (0 == ofs) {
type = grid[i][j].type;
/* Load the pin class lookups. The ptc nums for SINK and SOURCE
* are disjoint so they can share the list. */
tmp.nelem = type->num_class;
tmp.list = NULL;
if (tmp.nelem > 0) {
tmp.list = (int *) my_malloc(sizeof(int) * tmp.nelem);
for (k = 0; k < tmp.nelem; ++k) {
tmp.list[k] = *index;
++(*index);
}
}
indices[SINK][i][j] = tmp;
/* Load the pin lookups. The ptc nums for IPIN and OPIN
* are disjoint so they can share the list. */
tmp.nelem = type->num_pins;
tmp.list = NULL;
if (tmp.nelem > 0) {
tmp.list = (int *) my_malloc(sizeof(int) * tmp.nelem);
for (k = 0; k < tmp.nelem; ++k) {
tmp.list[k] = *index;
++(*index);
}
}
indices[IPIN][i][j] = tmp;
}
}
}
/* Point offset blocks of a large block to base block */
for (i = 0; i <= (L_nx + 1); i++) {
for (j = 0; j <= (L_ny + 1); j++) {
ofs = grid[i][j].offset;
if (ofs > 0) {
/* NOTE: this only supports vertical large blocks */
indices[SINK][i][j] = indices[SINK][i][j - ofs];
indices[IPIN][i][j] = indices[IPIN][i][j - ofs];
}
}
}
/* SOURCE and SINK have unique ptc values so their data can be shared.
* IPIN and OPIN have unique ptc values so their data can be shared. */
indices[SOURCE] = indices[SINK];
indices[OPIN] = indices[IPIN];
/* Original VPR */
/* Load the data for x and y channels */
/*
load_chan_rr_indices(nodes_per_chan, L_nx + 1, L_ny + 1, CHANX, seg_details,
index, indices);
load_chan_rr_indices(nodes_per_chan, L_ny + 1, L_nx + 1, CHANY, seg_details,
index, indices);
*/
/* end */
/* mrFPGA : Xifan TANG */
load_chan_rr_indices(nodes_per_chan, (is_stack ? L_ny + 1 : L_nx + 1), (is_stack ? L_nx + 1 : L_ny + 1),
CHANX, seg_details, index, indices);
load_chan_rr_indices(nodes_per_chan, (is_stack ? L_nx + 1 : L_ny + 1), (is_stack ? L_ny + 1 : L_nx + 1),
CHANY, seg_details, index, indices);
/* end */
return indices;
}
void free_rr_node_indices(INP t_ivec *** L_rr_node_indices) {
int i, j, ofs;
/* This function must unallocate the structure allocated in
* alloc_and_load_rr_node_indices. */
for (i = 0; i <= (nx + 1); ++i) {
for (j = 0; j <= (ny + 1); ++j) {
ofs = grid[i][j].offset;
if (ofs > 0) {
/* Vertical large blocks reference is same as offset 0 */
L_rr_node_indices[SINK][i][j].list = NULL;
L_rr_node_indices[IPIN][i][j].list = NULL;
continue;
}
if (L_rr_node_indices[SINK][i][j].list != NULL) {
free(L_rr_node_indices[SINK][i][j].list);
}
if (L_rr_node_indices[IPIN][i][j].list != NULL) {
free(L_rr_node_indices[IPIN][i][j].list);
}
}
free(L_rr_node_indices[SINK][i]);
free(L_rr_node_indices[IPIN][i]);
}
free(L_rr_node_indices[SINK]);
free(L_rr_node_indices[IPIN]);
for (i = 0; i < (nx + 1); ++i) {
for (j = 0; j < (ny + 1); ++j) {
if (L_rr_node_indices[CHANY][i][j].list != NULL) {
free(L_rr_node_indices[CHANY][i][j].list);
}
}
free(L_rr_node_indices[CHANY][i]);
}
free(L_rr_node_indices[CHANY]);
for (i = 0; i < (ny + 1); ++i) {
for (j = 0; j < (nx + 1); ++j) {
if (L_rr_node_indices[CHANX][i][j].list != NULL) {
free(L_rr_node_indices[CHANX][i][j].list);
}
}
free(L_rr_node_indices[CHANX][i]);
}
free(L_rr_node_indices[CHANX]);
free(L_rr_node_indices);
}
int get_rr_node_index(int x, int y, t_rr_type rr_type, int ptc,
t_ivec *** L_rr_node_indices) {
/* Returns the index of the specified routing resource node. (x,y) are *
* the location within the FPGA, rr_type specifies the type of resource, *
* and ptc gives the number of this resource. ptc is the class number, *
* pin number or track number, depending on what type of resource this *
* is. All ptcs start at 0 and go up to pins_per_clb-1 or the equivalent. *
* The order within a clb is: SOURCEs + SINKs (type->num_class of them); IPINs, *
* and OPINs (pins_per_clb of them); CHANX; and CHANY (nodes_per_chan of *
* each). For (x,y) locations that point at pads the order is: type->capacity *
* occurances of SOURCE, SINK, OPIN, IPIN (one for each pad), then one *
* associated channel (if there is a channel at (x,y)). All IO pads are *
* bidirectional, so while each will be used only as an INPAD or as an *
* OUTPAD, all the switches necessary to do both must be in each pad. *
* *
* Note that for segments (CHANX and CHANY) of length > 1, the segment is *
* given an rr_index based on the (x,y) location at which it starts (i.e. *
* lowest (x,y) location at which this segment exists). *
* This routine also performs error checking to make sure the node in *
* question exists. */
int iclass, tmp;
t_type_ptr type;
t_ivec lookup;
assert(ptc >= 0);
assert(x >= 0 && x <= (nx + 1));
assert(y >= 0 && y <= (ny + 1));
type = grid[x][y].type;
/* Currently need to swap x and y for CHANX because of chan, seg convention */
/* Original VPR */
/*
if (CHANX == rr_type) {
tmp = x;
x = y;
y = tmp;
}
*/
/* end */
/* mrFPGA: Xifan TANG*/
if ((is_stack ? CHANY : CHANX) == rr_type) {
tmp = x;
x = y;
y = tmp;
}
/* end */
/* Start of that block. */
lookup = L_rr_node_indices[rr_type][x][y];
/* Check valid ptc num */
assert(ptc >= 0);
assert(ptc < lookup.nelem);
#ifdef DEBUG
switch (rr_type) {
case SOURCE:
assert(ptc < type->num_class);
assert(type->class_inf[ptc].type == DRIVER);
break;
case SINK:
assert(ptc < type->num_class);
assert(type->class_inf[ptc].type == RECEIVER);
break;
case OPIN:
assert(ptc < type->num_pins);
iclass = type->pin_class[ptc];
assert(type->class_inf[iclass].type == DRIVER);
break;
case IPIN:
assert(ptc < type->num_pins);
iclass = type->pin_class[ptc];
assert(type->class_inf[iclass].type == RECEIVER);
break;
case CHANX:
case CHANY:
break;
default:
vpr_printf(TIO_MESSAGE_ERROR, "Bad rr_node passed to get_rr_node_index.\n");
vpr_printf(TIO_MESSAGE_ERROR, "Request for type=%d ptc=%d at (%d, %d).\n", rr_type, ptc, x, y);
exit(1);
}
#endif
return lookup.list[ptc];
}
int get_track_to_ipins(int seg, int chan, int track,
t_linked_edge ** edge_list_ptr, t_ivec *** L_rr_node_indices,
struct s_ivec ****track_to_ipin_lookup, t_seg_details * seg_details,
enum e_rr_type chan_type, int chan_length, int wire_to_ipin_switch,
enum e_directionality directionality) {
/* This counts the fan-out from wire segment (chan, seg, track) to blocks on either side */
t_linked_edge *edge_list_head;
int j, pass, iconn, phy_track, end, to_node, max_conn, ipin, side, x, y,
num_conn;
t_type_ptr type;
int off;
/* End of this wire */
/* Original VPR */
/* end = get_seg_end(seg_details, track, seg, chan, chan_length); */
/* end */
/* mrFPGA: Xifan TANG */
end = get_seg_end(seg_details, track, seg, chan, chan_length);
/* end */
edge_list_head = *edge_list_ptr;
num_conn = 0;
for (j = seg; j <= end; j++) {
if (is_cbox(chan, j, track, seg_details, directionality)) {
for (pass = 0; pass < 2; ++pass) {
/* mrFPGA: Xifan TANG */
if (is_stack) {
if (CHANX == chan_type) {
x = chan;
y = j + pass;
side = (0 == pass ? TOP : BOTTOM);
} else {
assert(CHANY == chan_type);
x = j + pass;
y = chan;
side = (0 == pass ? RIGHT : LEFT);
}
/* end */
} else {
/* Original VPR */
if (CHANX == chan_type) {
x = j;
y = chan + pass;
side = (0 == pass ? TOP : BOTTOM);
} else {
assert(CHANY == chan_type);
x = chan + pass;
y = j;
side = (0 == pass ? RIGHT : LEFT);
}
/* end */
}
/* PAJ - if the pointed to is an EMPTY then shouldn't look for ipins */
if (grid[x][y].type == EMPTY_TYPE)
continue;
/* Move from logical (straight) to physical (twisted) track index
* - algorithm assigns ipin connections to same physical track index
* so that the logical track gets distributed uniformly */
phy_track = vpr_to_phy_track(track, chan, j, seg_details,
directionality);
/* We need the type to find the ipin map for this type */
type = grid[x][y].type;
off = grid[x][y].offset;
max_conn =
track_to_ipin_lookup[type->index][phy_track][off][side].nelem;
for (iconn = 0; iconn < max_conn; iconn++) {
ipin =
track_to_ipin_lookup[type->index][phy_track][off][side].list[iconn];
/* Check there is a connection and Fc map isn't wrong */
assert(type->pinloc[off][side][ipin]);
assert(type->is_global_pin[ipin] == FALSE);
to_node = get_rr_node_index(x, y, IPIN, ipin,
L_rr_node_indices);
edge_list_head = insert_in_edge_list(edge_list_head,
to_node, wire_to_ipin_switch);
}
num_conn += max_conn;
}
}
}
*edge_list_ptr = edge_list_head;
return (num_conn);
}
/* Counts how many connections should be made from this segment to the y- *
* segments in the adjacent channels at to_j. It returns the number of *
* connections, and updates edge_list_ptr to point at the head of the *
* (extended) linked list giving the nodes to which this segment connects *
* and the switch type used to connect to each. *
* *
* An edge is added from this segment to a y-segment if: *
* (1) this segment should have a switch box at that location, or *
* (2) the y-segment to which it would connect has a switch box, and the *
* switch type of that y-segment is unbuffered (bidirectional pass *
* transistor). *
* *
* For bidirectional: *
* If the switch in each direction is a pass transistor (unbuffered), both *
* switches are marked as being of the types of the larger (lower R) pass *
* transistor. */
int get_track_to_tracks(INP int from_chan, INP int from_seg, INP int from_track,
INP t_rr_type from_type, INP int to_seg, INP t_rr_type to_type,
INP int chan_len, INP int nodes_per_chan, INP int *opin_mux_size,
INP int Fs_per_side, INP short *****sblock_pattern,
INOUTP struct s_linked_edge **edge_list,
INP t_seg_details * seg_details,
INP enum e_directionality directionality,
INP t_ivec *** L_rr_node_indices, INOUTP boolean * L_rr_edge_done,
INP struct s_ivec ***switch_block_conn) {
int num_conn;
int from_switch, from_end, from_sb, from_first;
int to_chan, to_sb;
int start, end;
struct s_ivec conn_tracks;
boolean from_is_sbox, is_behind, Fs_clipped;
enum e_side from_side_a, from_side_b, to_side;
/* mrFPGA: Xifan TANG */
//int true_from_start, true_from_end;
/* Original VPR */
assert(
from_seg == get_seg_start(seg_details, from_track, from_chan, from_seg));
from_end = get_seg_end(seg_details, from_track, from_seg, from_chan,
chan_len);
/* end */
from_switch = seg_details[from_track].wire_switch;
/* mrFPGA : Xifan TANG*/
if (is_stack) {
from_end = from_end + 1;
from_first = from_seg;
/* end */
} else {
/* Original VPR */
from_first = from_seg - 1;
}
/* end */
/* mrFPGA : Xifan TANG*/
if (is_stack ? (CHANY == from_type) : (CHANX == from_type)) {
from_side_a = RIGHT;
from_side_b = LEFT;
} else {
assert(is_stack ? (CHANX == from_type) : (CHANY == from_type));
from_side_a = TOP;
from_side_b = BOTTOM;
}
/* end */
/* Original VPR */
/* Figure out the sides of SB the from_wire will use */
/*
if (CHANX == from_type) {
from_side_a = RIGHT;
from_side_b = LEFT;
} else {
assert(CHANY == from_type);
from_side_a = TOP;
from_side_b = BOTTOM;
}
*/
/* end */
/* Figure out if the to_wire is connecting to a SB
* that is behind it. */
is_behind = FALSE;
if (to_type == from_type) {
/* Original VPR */
/* If inline, check that they only are trying
* to connect at endpoints. */
/*
assert((to_seg == (from_end + 1)) || (to_seg == (from_seg - 1)));
if (to_seg > from_end) {
is_behind = TRUE;
}
*/
/* end */
/* mrFPGA: Xifan TANG */
assert((to_seg == (from_end + (is_stack ? 0 : 1))) || (to_seg == (from_seg - 1)));
if (is_stack ? to_seg >= from_end : to_seg > from_end) {
is_behind = TRUE;
}
/* end */
} else {
/* Original VPR */
/* If bending, check that they are adjacent to
* our channel. */
/*
assert((to_seg == from_chan) || (to_seg == (from_chan + 1)));
if (to_seg > from_chan) {
is_behind = TRUE;
}
*/
/* end */
/* mrFPGA: Xifan TANG */
if (is_stack) {
assert((to_seg == (from_chan - 1)) || (to_seg == from_chan));
} else {
assert((to_seg == from_chan) || (to_seg == (from_chan + 1)));
}
if (is_stack ? (to_seg >= from_chan) : (to_seg > from_chan)) {
is_behind = TRUE;
}
/* end */
}
/* Original VPR */
/* Figure out the side of SB the to_wires will use.
* The to_seg and from_chan are in same direction. */
/*
if (CHANX == to_type) {
to_side = (is_behind ? RIGHT : LEFT);
} else {
assert(CHANY == to_type);
to_side = (is_behind ? TOP : BOTTOM);
}
*/
/* end */
/* mrFPGA: Xifan TANG */
if (is_stack ? (CHANY == to_type) : (CHANX == to_type)) {
to_side = (is_behind ? RIGHT : LEFT);
} else {
assert(is_stack ? (CHANX == to_type) : (CHANY == to_type));
to_side = (is_behind ? TOP : BOTTOM);
}
/* end */
/* Set the loop bounds */
start = from_first;
end = from_end;
/* If we are connecting in same direction the connection is
* on one of the two sides so clip the bounds to the SB of
* interest and proceed normally. */
if (to_type == from_type) {
start = (is_behind ? end : start);
end = start;
}
/* Iterate over the SBs */
num_conn = 0;
for (from_sb = start; from_sb <= end; ++from_sb) {
/* mrFPGA: Xifan TANG */
if (is_stack) {
if (CHANX == from_type) {
if ((0 == from_sb)||((ny + 1) == from_sb)) {
continue;
}
} else {
assert(CHANY == from_type);
if ((0 == from_sb)||((nx + 1) == from_sb)) {
continue;
}
}
}
/* end */
/* Figure out if we are at a sbox */
from_is_sbox = is_sbox(from_chan, from_seg, from_sb, from_track,
seg_details, directionality);
/* end of wire must be an sbox */
if (from_sb == from_end || from_sb == from_first) {
from_is_sbox = TRUE; /* Endpoints always default to true */
}
/* to_chan is the current segment if different directions,
* otherwise to_chan is the from_chan */
to_chan = from_sb;
to_sb = from_chan;
if (from_type == to_type) {
to_chan = from_chan;
to_sb = from_sb;
}
/* Do the edges going to the left or down */
if (from_sb < from_end) {
if (BI_DIRECTIONAL == directionality) {
conn_tracks =
switch_block_conn[from_side_a][to_side][from_track];
num_conn += get_bidir_track_to_chan_seg(conn_tracks,
L_rr_node_indices, to_chan, to_seg, to_sb, to_type,
seg_details, from_is_sbox, from_switch, L_rr_edge_done,
directionality, edge_list);
}
if (UNI_DIRECTIONAL == directionality) {
/* No fanout if no SB. */
/* We are connecting from the top or right of SB so it
* makes the most sense to only there from DEC_DIRECTION wires. */
if ((from_is_sbox)
&& (DEC_DIRECTION == seg_details[from_track].direction)) {
num_conn += get_unidir_track_to_chan_seg(
(boolean)(from_sb == from_first), from_track, to_chan,
to_seg, to_sb, to_type, nodes_per_chan, nx, ny,
from_side_a, to_side, Fs_per_side, opin_mux_size,
sblock_pattern, L_rr_node_indices, seg_details,
L_rr_edge_done, &Fs_clipped, edge_list);
}
}
}
/* Do the edges going to the right or up */
if (from_sb > from_first) {
if (BI_DIRECTIONAL == directionality) {
conn_tracks =
switch_block_conn[from_side_b][to_side][from_track];
num_conn += get_bidir_track_to_chan_seg(conn_tracks,
L_rr_node_indices, to_chan, to_seg, to_sb, to_type,
seg_details, from_is_sbox, from_switch, L_rr_edge_done,
directionality, edge_list);
}
if (UNI_DIRECTIONAL == directionality) {
/* No fanout if no SB. */
/* We are connecting from the bottom or left of SB so it
* makes the most sense to only there from INC_DIRECTION wires. */
if ((from_is_sbox)
&& (INC_DIRECTION == seg_details[from_track].direction)) {
num_conn += get_unidir_track_to_chan_seg(
(boolean)(from_sb == from_end), from_track, to_chan, to_seg,
to_sb, to_type, nodes_per_chan, nx, ny, from_side_b,
to_side, Fs_per_side, opin_mux_size, sblock_pattern,
L_rr_node_indices, seg_details, L_rr_edge_done,
&Fs_clipped, edge_list);
}
}
}
}
return num_conn;
}
/* mrFPGA : Xifan TANG, Abolish */
/*
static int get_seg_to_seg(INP t_ivec*** L_rr_node_indices,
INP int to_chan,
INP int to_seg,
INP int track,
INP t_rr_type type,
INP t_seg_details* seg_details,
INOUTP struct s_linked_edge** edge_list) {
int to_x, to_y, to_node;
if ((is_stack ? CHANY : CHANX) == type) {
to_x = to_seg;
to_y = to_chan;
} else {
assert((is_stack ? CHANX : CHANY) == type);
to_x = to_chan;
to_y = to_seg;
}
to_node = get_rr_node_index(to_x, to_y, type, track, L_rr_node_indices);
*edge_list = insert_in_edge_list(*edge_list, to_node, seg_details[track].seg_switch);
return 1;
}
*/
/* END */
static int get_bidir_track_to_chan_seg(INP struct s_ivec conn_tracks,
INP t_ivec *** L_rr_node_indices, INP int to_chan, INP int to_seg,
INP int to_sb, INP t_rr_type to_type, INP t_seg_details * seg_details,
INP boolean from_is_sbox, INP int from_switch,
INOUTP boolean * L_rr_edge_done,
INP enum e_directionality directionality,
INOUTP struct s_linked_edge **edge_list) {
int iconn, to_track, to_node, to_switch, num_conn, to_x, to_y, i;
boolean to_is_sbox;
short switch_types[2];
/* Original VPR */
/* x, y coords for get_rr_node lookups */
/*
if (CHANX == to_type) {
to_x = to_seg;
to_y = to_chan;
} else {
assert(CHANY == to_type);
to_x = to_chan;
to_y = to_seg;
}
*/
/* END */
/* mrFPGA : Xifan TANG*/
if ((is_stack ? CHANY : CHANX) == to_type) {
to_x = to_seg;
to_y = to_chan;
} else {
assert((is_stack ? CHANX : CHANY) == to_type);
to_x = to_chan;
to_y = to_seg;
}
/* END */
/* Go through the list of tracks we can connect to */
num_conn = 0;
for (iconn = 0; iconn < conn_tracks.nelem; ++iconn) {
to_track = conn_tracks.list[iconn];
to_node = get_rr_node_index(to_x, to_y, to_type, to_track,
L_rr_node_indices);
/* Skip edge if already done */
if (L_rr_edge_done[to_node]) {
continue;
}
/* Get the switches for any edges between the two tracks */
to_switch = seg_details[to_track].wire_switch;
to_is_sbox = is_sbox(to_chan, to_seg, to_sb, to_track, seg_details,
directionality);
get_switch_type(from_is_sbox, to_is_sbox, from_switch, to_switch,
switch_types);
/* There are up to two switch edges allowed from track to track */
for (i = 0; i < 2; ++i) {
/* If the switch_type entry is empty, skip it */
if (OPEN == switch_types[i]) {
continue;
}
/* Add the edge to the list */
*edge_list = insert_in_edge_list(*edge_list, to_node,
switch_types[i]);
/* Mark the edge as now done */
L_rr_edge_done[to_node] = TRUE;
++num_conn;
}
}
return num_conn;
}
static int get_unidir_track_to_chan_seg(INP boolean is_end_sb,
INP int from_track, INP int to_chan, INP int to_seg, INP int to_sb,
INP t_rr_type to_type, INP int nodes_per_chan, INP int L_nx,
INP int L_ny, INP enum e_side from_side, INP enum e_side to_side,
INP int Fs_per_side, INP int *opin_mux_size,
INP short *****sblock_pattern, INP t_ivec *** L_rr_node_indices,
INP t_seg_details * seg_details, INOUTP boolean * L_rr_edge_done,
OUTP boolean * Fs_clipped, INOUTP struct s_linked_edge **edge_list) {
int to_track, to_mux, to_node, to_x, to_y, i, max_len, num_labels;
int sb_x, sb_y, count;
int *mux_labels = NULL;
enum e_direction to_dir;
boolean is_fringe, is_core, is_corner, is_straight;
/* x, y coords for get_rr_node lookups */
/* Original VPR */
/*
if (CHANX == to_type) {
to_x = to_seg;
to_y = to_chan;
sb_x = to_sb;
sb_y = to_chan;
max_len = L_nx;
} else {
assert(CHANY == to_type);
to_x = to_chan;
to_y = to_seg;
sb_x = to_chan;
sb_y = to_sb;
max_len = L_ny;
}
*/
/* end */
/* mrFPGA: Xifan TANG*/
if ((is_stack ? CHANY : CHANX) == to_type) {
to_x = to_seg;
to_y = to_chan;
sb_x = to_sb;
sb_y = to_chan;
max_len = L_nx;
} else {
assert((is_stack ? CHANX : CHANY) == to_type);
to_x = to_chan;
to_y = to_seg;
sb_x = to_chan;
sb_y = to_sb;
max_len = L_ny;
}
/* end */
to_dir = DEC_DIRECTION;
if (to_sb < to_seg) {
to_dir = INC_DIRECTION;
}
*Fs_clipped = FALSE;
/* SBs go from (0, 0) to (nx, ny) */
is_corner = (boolean)(((sb_x < 1) || (sb_x >= L_nx))
&& ((sb_y < 1) || (sb_y >= L_ny)));
is_fringe = (boolean)((FALSE == is_corner)
&& ((sb_x < 1) || (sb_y < 1) || (sb_x >= L_nx) || (sb_y >= L_ny)));
is_core = (boolean)((FALSE == is_corner) && (FALSE == is_fringe));
is_straight = (boolean)((from_side == RIGHT && to_side == LEFT)
|| (from_side == LEFT && to_side == RIGHT)
|| (from_side == TOP && to_side == BOTTOM)
|| (from_side == BOTTOM && to_side == TOP));
/* Ending wires use N-to-N mapping if not fringe or if goes straight */
if (is_end_sb && (is_core || is_corner || is_straight)) {
/* Get the list of possible muxes for the N-to-N mapping. */
mux_labels = label_wire_muxes(to_chan, to_seg, seg_details, max_len,
to_dir, nodes_per_chan, &num_labels);
} else {
assert(is_fringe || !is_end_sb);
mux_labels = label_wire_muxes_for_balance(to_chan, to_seg, seg_details,
max_len, to_dir, nodes_per_chan, &num_labels, to_type,
opin_mux_size, L_rr_node_indices);
}
/* Can't connect if no muxes. */
if (num_labels < 1) {
if (mux_labels) {
free(mux_labels);
mux_labels = NULL;
}
return 0;
}
/* Check if Fs demand was too high. */
if (Fs_per_side > num_labels) {
*Fs_clipped = TRUE;
}
/* Get the target label */
to_mux = sblock_pattern[sb_x][sb_y][from_side][to_side][from_track];
assert(to_mux != UN_SET);
/* Handle Fs > 3 but assigning consecutive muxes. */
count = 0;
for (i = 0; i < Fs_per_side; ++i) {
/* Use the balanced labeling for passing and fringe wires */
to_track = mux_labels[(to_mux + i) % num_labels];
to_node = get_rr_node_index(to_x, to_y, to_type, to_track,
L_rr_node_indices);
/* Add edge to list. */
if (FALSE == L_rr_edge_done[to_node]) {
L_rr_edge_done[to_node] = TRUE;
*edge_list = insert_in_edge_list(*edge_list, to_node,
seg_details[to_track].wire_switch);
++count;
}
}
if (mux_labels) {
free(mux_labels);
mux_labels = NULL;
}
return count;
}
boolean is_sbox(INP int chan, INP int wire_seg, INP int sb_seg, INP int track,
INP t_seg_details * seg_details,
INP enum e_directionality directionality) {
int length, ofs, fac;
fac = 1;
if (UNI_DIRECTIONAL == directionality) {
fac = 2;
}
length = seg_details[track].length;
/* Make sure they gave us correct start */
wire_seg = get_seg_start(seg_details, track, chan, wire_seg);
/* original VPR */
/* Ofset 0 is behind us, so add 1 */
/* ofs = sb_seg - wire_seg + 1; */
/* end */
/* mrFPGA: Xifan TANG */
ofs = sb_seg - wire_seg + (is_stack ? 0 : 1);
/* end */
assert(ofs >= 0);
assert(ofs < (length + 1));
/* If unidir segment that is going backwards, we need to flip the ofs */
if ((ofs % fac) > 0) {
ofs = length - ofs;
}
return seg_details[track].sb[ofs];
}
static void get_switch_type(boolean is_from_sbox, boolean is_to_sbox,
short from_node_switch, short to_node_switch, short switch_types[2]) {
/* This routine looks at whether the from_node and to_node want a switch, *
* and what type of switch is used to connect *to* each type of node *
* (from_node_switch and to_node_switch). It decides what type of switch, *
* if any, should be used to go from from_node to to_node. If no switch *
* should be inserted (i.e. no connection), it returns OPEN. Its returned *
* values are in the switch_types array. It needs to return an array *
* because one topology (a buffer in the forward direction and a pass *
* transistor in the backward direction) results in *two* switches. */
boolean forward_pass_trans;
boolean backward_pass_trans;
int used, min_switch, max_switch;
/* mrFPGA: Xifan TANG */
if (is_mrFPGA) {
get_mrfpga_switch_type(is_from_sbox, is_to_sbox, from_node_switch,
to_node_switch, switch_types);
return;
}
/* end */
switch_types[0] = OPEN; /* No switch */
switch_types[1] = OPEN;
used = 0;
forward_pass_trans = FALSE;
backward_pass_trans = FALSE;
/* Connect forward if we are a sbox */
if (is_from_sbox) {
switch_types[used] = to_node_switch;
if (FALSE == switch_inf[to_node_switch].buffered) {
forward_pass_trans = TRUE;
}
++used;
}
/* Check for pass_trans coming backwards */
if (is_to_sbox) {
if (FALSE == switch_inf[from_node_switch].buffered) {
switch_types[used] = from_node_switch;
backward_pass_trans = TRUE;
++used;
}
}
/* Take the larger pass trans if there are two */
if (forward_pass_trans && backward_pass_trans) {
min_switch = std::min(to_node_switch, from_node_switch);
max_switch = std::max(to_node_switch, from_node_switch);
/* Take the smaller index unless the other
* pass_trans is bigger (smaller R). */
switch_types[used] = min_switch;
if (switch_inf[max_switch].R < switch_inf[min_switch].R) {
switch_types[used] = max_switch;
}
++used;
}
}
static int vpr_to_phy_track(INP int itrack, INP int chan_num, INP int seg_num,
INP t_seg_details * seg_details,
INP enum e_directionality directionality) {
int group_start, group_size;
int vpr_offset_for_first_phy_track;
int vpr_offset, phy_offset;
int phy_track;
int fac;
/* Assign in pairs if unidir. */
fac = 1;
if (UNI_DIRECTIONAL == directionality) {
fac = 2;
}
group_start = seg_details[itrack].group_start;
group_size = seg_details[itrack].group_size;
vpr_offset_for_first_phy_track = (chan_num + seg_num - 1)
% (group_size / fac);
vpr_offset = (itrack - group_start) / fac;
phy_offset = (vpr_offset_for_first_phy_track + vpr_offset)
% (group_size / fac);
phy_track = group_start + (fac * phy_offset) + (itrack - group_start) % fac;
return phy_track;
}
short *****
alloc_sblock_pattern_lookup(INP int L_nx, INP int L_ny, INP int nodes_per_chan) {
int i, j, from_side, to_side, itrack, items;
short *****result;
short *****i_list;
short ****j_list;
short ***from_list;
short **to_list;
short *track_list;
/* loading up the sblock connection pattern matrix. It's a huge matrix because
* for nonquantized W, it's impossible to make simple permutations to figure out
* where muxes are and how to connect to them such that their sizes are balanced */
/* Do chunked allocations to make freeing easier, speed up malloc and free, and
* reduce some of the memory overhead. Could use fewer malloc's but this way
* avoids all considerations of pointer sizes and allignment. */
/* Alloc each list of pointers in one go. items is a running product that increases
* with each new dimension of the matrix. */
items = 1;
items *= (L_nx + 1);
i_list = (short *****) my_malloc(sizeof(short ****) * items);
items *= (L_ny + 1);
j_list = (short ****) my_malloc(sizeof(short ***) * items);
items *= (4);
from_list = (short ***) my_malloc(sizeof(short **) * items);
items *= (4);
to_list = (short **) my_malloc(sizeof(short *) * items);
items *= (nodes_per_chan);
track_list = (short *) my_malloc(sizeof(short) * items);
/* Build the pointer lists to form the multidimensional array */
result = i_list;
i_list += (L_nx + 1); /* Skip forward nx+1 items */
for (i = 0; i < (L_nx + 1); ++i) {
result[i] = j_list;
j_list += (L_ny + 1); /* Skip forward ny+1 items */
for (j = 0; j < (L_ny + 1); ++j) {
result[i][j] = from_list;
from_list += (4); /* Skip forward 4 items */
for (from_side = 0; from_side < 4; ++from_side) {
result[i][j][from_side] = to_list;
to_list += (4); /* Skip forward 4 items */
for (to_side = 0; to_side < 4; ++to_side) {
result[i][j][from_side][to_side] = track_list;
track_list += (nodes_per_chan); /* Skip forward nodes_per_chan items */
for (itrack = 0; itrack < nodes_per_chan; itrack++) {
/* Set initial value to be unset */
result[i][j][from_side][to_side][itrack] = UN_SET;
}
}
}
}
}
/* This is the outer pointer to the full matrix */
return result;
}
void free_sblock_pattern_lookup(INOUTP short *****sblock_pattern) {
/* This free function corresponds to the chunked matrix
* allocation above and there should only be one free
* call for each dimension. */
/* Free dimensions from the inner one, outwards so
* we can still access them. The comments beside
* each one indicate the corresponding name used when
* allocating them. */
free(****sblock_pattern); /* track_list */
free(***sblock_pattern); /* to_list */
free(**sblock_pattern); /* from_list */
free(*sblock_pattern); /* j_list */
free(sblock_pattern); /* i_list */
}
void load_sblock_pattern_lookup(INP int i, INP int j, INP int nodes_per_chan,
INP t_seg_details * seg_details, INP int Fs,
INP enum e_switch_block_type switch_block_type,
INOUTP short *****sblock_pattern) {
/* This routine loads a lookup table for sblock topology. The lookup table is huge
* because the sblock varies from location to location. The i, j means the owning
* location of the sblock under investigation. */
int side_cw_incoming_wire_count, side_ccw_incoming_wire_count,
opp_incoming_wire_count;
int to_side, side, side_cw, side_ccw, side_opp, itrack;
int Fs_per_side, chan, seg, chan_len, sb_seg;
boolean is_core_sblock, is_corner_sblock, x_edge, y_edge;
int *incoming_wire_label[4];
int *wire_mux_on_track[4];
int num_incoming_wires[4];
int num_ending_wires[4];
int num_wire_muxes[4];
boolean skip, vert, pos_dir;
enum e_direction dir;
Fs_per_side = 1;
if (Fs != -1) {
Fs_per_side = Fs / 3;
}
/* SB's have coords from (0, 0) to (nx, ny) */
assert(i >= 0);
assert(i <= nx);
assert(j >= 0);
assert(j <= ny);
/* May 12 - 15, 2007
*
* I identify three types of sblocks in the chip: 1) The core sblock, whose special
* property is that the number of muxes (and ending wires) on each side is the same (very useful
* property, since it leads to a N-to-N assignment problem with ending wires). 2) The corner sblock
* which is same as a L=1 core sblock with 2 sides only (again N-to-N assignment problem). 3) The
* fringe / chip edge sblock which is most troublesome, as balance in each side of muxes is
* attainable but balance in the entire sblock is not. The following code first identifies the
* incoming wires, which can be classified into incoming passing wires with sbox and incoming
* ending wires (the word "incoming" is sometimes dropped for ease of discussion). It appropriately
* labels all the wires on each side by the following order: By the call to label_incoming_wires,
* which labels for one side, the order is such that the incoming ending wires (always with sbox)
* are labelled first 0,1,2,... p-1, then the incoming passing wires with sbox are labelled
* p,p+1,p+2,... k-1 (for total of k). By this convention, one can easily distinguish the ending
* wires from the passing wires by checking a label against num_ending_wires variable.
*
* After labelling all the incoming wires, this routine labels the muxes on the side we're currently
* connecting to (iterated for four sides of the sblock), called the to_side. The label scheme is
* the natural order of the muxes by their track #. Also we find the number of muxes.
*
* For each to_side, the total incoming wires that connect to the muxes on to_side
* come from three sides: side_1 (to_side's right), side_2 (to_side's left) and opp_side.
* The problem of balancing mux size is then: considering all incoming passing wires
* with sbox on side_1, side_2 and opp_side, how to assign them to the muxes on to_side
* (with specified Fs) in a way that mux size is imbalanced by at most 1. I solve this
* problem by this approach: the first incoming passing wire will connect to 0, 1, 2,
* ..., Fs_per_side - 1, then the next incoming passing wire will connect to
* Fs_per_side, Fs_per_side+1, ..., Fs_per_side*2-1, and so on. This consistent STAGGERING
* ensures N-to-N assignment is perfectly balanced and M-to-N assignment is imbalanced by no
* more than 1.
*
* For the sblock_pattern_init_mux_lookup lookup table, I will only need the lookup
* table to remember the first/init mux to connect, since the convention is Fs_per_side consecutive
* muxes to connect. Then how do I determine the order of the incoming wires? I use the labels
* on side_1, then labels on side_2, then labels on opp_side. Effectively I listed all
* incoming passing wires from the three sides, and order them to each make Fs_per_side
* consecutive connections to muxes, and use % to rotate to keep imbalance at most 1.
*/
/* SB's range from (0, 0) to (nx, ny) */
/* First find all four sides' incoming wires */
x_edge = (boolean)((i < 1) || (i >= nx));
y_edge = (boolean)((j < 1) || (j >= ny));
is_corner_sblock = (boolean)(x_edge && y_edge);
is_core_sblock = (boolean)(!x_edge && !y_edge);
/* "Label" the wires around the switch block by connectivity. */
for (side = 0; side < 4; ++side) {
/* Assume the channel segment doesn't exist. */
wire_mux_on_track[side] = NULL;
incoming_wire_label[side] = NULL;
num_incoming_wires[side] = 0;
num_ending_wires[side] = 0;
num_wire_muxes[side] = 0;
/* Skip the side and leave the zero'd value if the
* channel segment doesn't exist. */
skip = TRUE;
switch (side) {
/* Original VPR */
/*
case TOP:
if (j < ny) {
skip = FALSE;
}
;
break;
case RIGHT:
if (i < nx) {
skip = FALSE;
}
break;
case BOTTOM:
if (j > 0) {
skip = FALSE;
}
break;
case LEFT:
if (i > 0) {
skip = FALSE;
}
break;
}
*/
/* end */
/* mrFPGA : Xifan TANG*/
case TOP:
if (j < (is_stack ? ny+1 : ny)) {
skip = FALSE;
}
;
break;
case RIGHT:
if (i < (is_stack ? nx+1 : nx)) {
skip = FALSE;
}
break;
case BOTTOM:
if (j > 0) {
skip = FALSE;
}
break;
case LEFT:
if (i > 0) {
skip = FALSE;
}
break;
}
/* end */
if (skip) {
continue;
}
/* Figure out the channel and segment for a certain direction */
vert = (boolean) ((side == TOP) || (side == BOTTOM));
pos_dir = (boolean) ((side == TOP) || (side == RIGHT));
chan = (vert ? i : j);
sb_seg = (vert ? j : i);
/* Original VPR */
/* seg = (pos_dir ? (sb_seg + 1) : sb_seg); */
/* end */
/* mrFPGA : Xifan TANG*/
seg = (pos_dir ? (sb_seg + 1) : sb_seg) - (is_stack ? 1 : 0);
/* end */
chan_len = (vert ? ny : nx);
/* Figure out all the tracks on a side that are ending and the
* ones that are passing through and have a SB. */
dir = (pos_dir ? DEC_DIRECTION : INC_DIRECTION);
incoming_wire_label[side] = label_incoming_wires(chan, seg, sb_seg,
seg_details, chan_len, dir, nodes_per_chan,
&num_incoming_wires[side], &num_ending_wires[side]);
/* Figure out all the tracks on a side that are starting. */
dir = (pos_dir ? INC_DIRECTION : DEC_DIRECTION);
wire_mux_on_track[side] = label_wire_muxes(chan, seg, seg_details,
chan_len, dir, nodes_per_chan, &num_wire_muxes[side]);
}
for (to_side = 0; to_side < 4; to_side++) {
/* Can't do anything if no muxes on this side. */
if (0 == num_wire_muxes[to_side]) {
continue;
}
/* Figure out side rotations */
assert((TOP == 0) && (RIGHT == 1) && (BOTTOM == 2) && (LEFT == 3));
side_cw = (to_side + 1) % 4;
side_opp = (to_side + 2) % 4;
side_ccw = (to_side + 3) % 4;
/* For the core sblock:
* The new order for passing wires should appear as
* 0,1,2..,scw-1, for passing wires with sbox on side_cw
* scw,scw+1,...,sccw-1, for passing wires with sbox on side_ccw
* sccw,sccw+1,... for passing wires with sbox on side_opp.
* This way, I can keep the imbalance to at most 1.
*
* For the fringe sblocks, I don't distinguish between
* passing and ending wires so the above statement still holds
* if you replace "passing" by "incoming" */
side_cw_incoming_wire_count = 0;
if (incoming_wire_label[side_cw]) {
for (itrack = 0; itrack < nodes_per_chan; itrack++) {
/* Ending wire, or passing wire with sbox. */
if (incoming_wire_label[side_cw][itrack] != UN_SET) {
if ((is_corner_sblock || is_core_sblock)
&& (incoming_wire_label[side_cw][itrack]
< num_ending_wires[side_cw])) {
/* The ending wires in core sblocks form N-to-N assignment
* problem, so can use any pattern such as Wilton. This N-to-N
* mapping depends on the fact that start points stagger across
* channels. */
assert(
num_ending_wires[side_cw] == num_wire_muxes[to_side]);
sblock_pattern[i][j][side_cw][to_side][itrack] =
get_simple_switch_block_track((enum e_side)side_cw, (enum e_side)to_side,
incoming_wire_label[side_cw][itrack],
switch_block_type,
num_wire_muxes[to_side]);
} else {
/* These are passing wires with sbox only for core sblocks
* or passing and ending wires (for fringe cases). */
sblock_pattern[i][j][side_cw][to_side][itrack] =
(side_cw_incoming_wire_count * Fs_per_side)
% num_wire_muxes[to_side];
side_cw_incoming_wire_count++;
}
}
}
}
side_ccw_incoming_wire_count = 0;
for (itrack = 0; itrack < nodes_per_chan; itrack++) {
/* if that side has no channel segment skip it */
if (incoming_wire_label[side_ccw] == NULL)
break;
/* not ending wire nor passing wire with sbox */
if (incoming_wire_label[side_ccw][itrack] != UN_SET) {
if ((is_corner_sblock || is_core_sblock)
&& (incoming_wire_label[side_ccw][itrack]
< num_ending_wires[side_ccw])) {
/* The ending wires in core sblocks form N-to-N assignment problem, so can
* use any pattern such as Wilton */
assert(
incoming_wire_label[side_ccw] [itrack] < num_wire_muxes[to_side]);
sblock_pattern[i][j][side_ccw][to_side][itrack] =
get_simple_switch_block_track((enum e_side)side_ccw, (enum e_side)to_side,
incoming_wire_label[side_ccw][itrack],
switch_block_type, num_wire_muxes[to_side]);
} else {
/* These are passing wires with sbox only for core sblocks
* or passing and ending wires (for fringe cases). */
sblock_pattern[i][j][side_ccw][to_side][itrack] =
((side_ccw_incoming_wire_count
+ side_cw_incoming_wire_count) * Fs_per_side)
% num_wire_muxes[to_side];
side_ccw_incoming_wire_count++;
}
}
}
opp_incoming_wire_count = 0;
if (incoming_wire_label[side_opp]) {
for (itrack = 0; itrack < nodes_per_chan; itrack++) {
/* not ending wire nor passing wire with sbox */
if (incoming_wire_label[side_opp][itrack] != UN_SET) {
/* corner sblocks for sure have no opposite channel segments so don't care about them */
if (is_core_sblock) {
if (incoming_wire_label[side_opp][itrack]
< num_ending_wires[side_opp]) {
/* The ending wires in core sblocks form N-to-N assignment problem, so can
* use any pattern such as Wilton */
/* In the direct connect case, I know for sure the init mux is at the same track #
* as this ending wire, but still need to find the init mux label for Fs > 3 */
sblock_pattern[i][j][side_opp][to_side][itrack] =
find_label_of_track(
wire_mux_on_track[to_side],
num_wire_muxes[to_side], itrack);
} else {
/* These are passing wires with sbox for core sblocks */
sblock_pattern[i][j][side_opp][to_side][itrack] =
((side_ccw_incoming_wire_count
+ side_cw_incoming_wire_count)
* Fs_per_side
+ opp_incoming_wire_count
* (Fs_per_side - 1))
% num_wire_muxes[to_side];
opp_incoming_wire_count++;
}
} else {
if (incoming_wire_label[side_opp][itrack]
< num_ending_wires[side_opp]) {
sblock_pattern[i][j][side_opp][to_side][itrack] =
find_label_of_track(
wire_mux_on_track[to_side],
num_wire_muxes[to_side], itrack);
} else {
/* These are passing wires with sbox for fringe sblocks */
sblock_pattern[i][j][side_opp][to_side][itrack] =
((side_ccw_incoming_wire_count
+ side_cw_incoming_wire_count)
* Fs_per_side
+ opp_incoming_wire_count
* (Fs_per_side - 1))
% num_wire_muxes[to_side];
opp_incoming_wire_count++;
}
}
}
}
}
}
for (side = 0; side < 4; ++side) {
if (incoming_wire_label[side]) {
free(incoming_wire_label[side]);
}
if (wire_mux_on_track[side]) {
free(wire_mux_on_track[side]);
}
}
}
static int *
label_wire_muxes_for_balance(INP int chan_num, INP int seg_num,
INP t_seg_details * seg_details, INP int max_len,
INP enum e_direction direction, INP int nodes_per_chan,
INP int *num_wire_muxes, INP t_rr_type chan_type,
INP int *opin_mux_size, INP t_ivec *** L_rr_node_indices) {
/* Labels the muxes on that side (seg_num, chan_num, direction). The returned array
* maps a label to the actual track #: array[0] = <the track number of the first mux> */
/* Sblock (aka wire2mux) pattern generation occurs after opin2mux connections have been
* made. Since opin2muxes are done with a pattern with which I guarantee imbalance of at most 1 due
* to them, we will observe that, for each side of an sblock some muxes have one fewer size
* than the others, considering only the contribution from opins. I refer to these muxes as "holes"
* as they have one fewer opin connection going to them than the rest (like missing one electron)*/
/* Before May 14, I was labelling wire muxes in the natural order of their track # (lowest first).
* Now I want to label wire muxes like this: first label the holes in order of their track #,
* then label the non-holes in order of their track #. This way the wire2mux generation will
* not overlap its own "holes" with the opin "holes", thus creating imbalance greater than 1. */
/* The best approach in sblock generation is do one assignment of all incoming wires from 3 other
* sides to the muxes on the fourth side, connecting the "opin hole" muxes first (i.e. filling
* the holes) then the rest -> this means after all opin2mux and wire2mux connections the
* mux size imbalance on one side is at most 1. The mux size imbalance in one sblock is thus
* also one, since the number of muxes per side is identical for all four sides, and they number
* of incoming wires per side is identical for full pop, and almost the same for depop (due to
* staggering) within +1 or -1. For different tiles (different sblocks) the imbalance is irrelevant,
* since if the tiles are different in mux count then they have to be designed with a different
* physical tile. */
int num_labels, max_opin_mux_size, min_opin_mux_size;
int inode, i, j, x, y;
int *pre_labels, *final_labels;
if (chan_type == CHANX) {
x = seg_num;
y = chan_num;
} else if (chan_type == CHANY) {
x = chan_num;
y = seg_num;
} else {
vpr_printf(TIO_MESSAGE_ERROR, "Bad channel type (%d).\n", chan_type);
exit(1);
}
/* Generate the normal labels list as the baseline. */
pre_labels = label_wire_muxes(chan_num, seg_num, seg_details, max_len,
direction, nodes_per_chan, &num_labels);
/* Find the min and max mux size. */
min_opin_mux_size = MAX_SHORT;
max_opin_mux_size = 0;
for (i = 0; i < num_labels; ++i) {
inode = get_rr_node_index(x, y, chan_type, pre_labels[i],
L_rr_node_indices);
if (opin_mux_size[inode] < min_opin_mux_size) {
min_opin_mux_size = opin_mux_size[inode];
}
if (opin_mux_size[inode] > max_opin_mux_size) {
max_opin_mux_size = opin_mux_size[inode];
}
}
if (max_opin_mux_size > (min_opin_mux_size + 1)) {
vpr_printf(TIO_MESSAGE_ERROR, "opin muxes are not balanced!\n");
vpr_printf(TIO_MESSAGE_ERROR, "max_opin_mux_size %d min_opin_mux_size %d chan_type %d x %d y %d\n",
max_opin_mux_size, min_opin_mux_size, chan_type, x, y);
exit(1);
}
/* Create a new list that we will move the muxes with 'holes' to the start of list. */
final_labels = (int *) my_malloc(sizeof(int) * num_labels);
j = 0;
for (i = 0; i < num_labels; ++i) {
inode = pre_labels[i];
if (opin_mux_size[inode] < max_opin_mux_size) {
final_labels[j] = inode;
++j;
}
}
for (i = 0; i < num_labels; ++i) {
inode = pre_labels[i];
if (opin_mux_size[inode] >= max_opin_mux_size) {
final_labels[j] = inode;
++j;
}
}
/* Free the baseline labelling. */
if (pre_labels) {
free(pre_labels);
pre_labels = NULL;
}
*num_wire_muxes = num_labels;
return final_labels;
}
static int *
label_wire_muxes(INP int chan_num, INP int seg_num,
INP t_seg_details * seg_details, INP int max_len,
INP enum e_direction dir, INP int nodes_per_chan,
OUTP int *num_wire_muxes) {
/* Labels the muxes on that side (seg_num, chan_num, direction). The returned array
* maps a label to the actual track #: array[0] = <the track number of the first/lowest mux>
* This routine orders wire muxes by their natural order, i.e. track # */
int itrack, start, end, num_labels, pass;
int *labels = NULL;
boolean is_endpoint;
/* COUNT pass then a LOAD pass */
num_labels = 0;
for (pass = 0; pass < 2; ++pass) {
/* Alloc the list on LOAD pass */
if (pass > 0) {
labels = (int *) my_malloc(sizeof(int) * num_labels);
num_labels = 0;
}
/* Find the tracks that are starting. */
for (itrack = 0; itrack < nodes_per_chan; ++itrack) {
start = get_seg_start(seg_details, itrack, chan_num, seg_num);
end = get_seg_end(seg_details, itrack, start, chan_num, max_len);
/* Skip tracks going the wrong way */
if (seg_details[itrack].direction != dir) {
continue;
}
/* Determine if we are a wire startpoint */
is_endpoint = (boolean)(seg_num == start);
if (DEC_DIRECTION == seg_details[itrack].direction) {
is_endpoint = (boolean)(seg_num == end);
}
/* Count the labels and load if LOAD pass */
if (is_endpoint) {
if (pass > 0) {
labels[num_labels] = itrack;
}
++num_labels;
}
}
}
*num_wire_muxes = num_labels;
return labels;
}
static int *
label_incoming_wires(INP int chan_num, INP int seg_num, INP int sb_seg,
INP t_seg_details * seg_details, INP int max_len,
INP enum e_direction dir, INP int nodes_per_chan,
OUTP int *num_incoming_wires, OUTP int *num_ending_wires) {
/* Labels the incoming wires on that side (seg_num, chan_num, direction).
* The returned array maps a track # to a label: array[0] = <the new hash value/label for track 0>,
* the labels 0,1,2,.. identify consecutive incoming wires that have sbox (passing wires with sbox and ending wires) */
int itrack, start, end, i, num_passing, num_ending, pass;
int *labels;
boolean sbox_exists, is_endpoint;
/* Alloc the list of labels for the tracks */
labels = (int *) my_malloc(nodes_per_chan * sizeof(int));
for (i = 0; i < nodes_per_chan; ++i) {
labels[i] = UN_SET; /* crash hard if unset */
}
num_ending = 0;
num_passing = 0;
for (pass = 0; pass < 2; ++pass) {
for (itrack = 0; itrack < nodes_per_chan; ++itrack) {
if (seg_details[itrack].direction == dir) {
start = get_seg_start(seg_details, itrack, chan_num, seg_num);
end = get_seg_end(seg_details, itrack, start, chan_num,
max_len);
/* Determine if we are a wire endpoint */
is_endpoint = (boolean)(seg_num == end);
if (DEC_DIRECTION == seg_details[itrack].direction) {
is_endpoint = (boolean)(seg_num == start);
}
/* Determine if we have a sbox on the wire */
sbox_exists = is_sbox(chan_num, seg_num, sb_seg, itrack,
seg_details, UNI_DIRECTIONAL);
switch (pass) {
/* On first pass, only load ending wire labels. */
case 0:
if (is_endpoint) {
labels[itrack] = num_ending;
++num_ending;
}
break;
/* On second pass, load the passing wire labels. They
* will follow after the ending wire labels. */
case 1:
if ((FALSE == is_endpoint) && sbox_exists) {
labels[itrack] = num_ending + num_passing;
++num_passing;
}
break;
}
}
}
}
*num_incoming_wires = num_passing + num_ending;
*num_ending_wires = num_ending;
return labels;
}
static int find_label_of_track(int *wire_mux_on_track, int num_wire_muxes,
int from_track) {
int i;
/* Returns the index/label in array wire_mux_on_track whose entry equals from_track. If none are
* found, then returns the index of the entry whose value is the largest */
for (i = 0; i < num_wire_muxes; i++) {
if (wire_mux_on_track[i] == from_track) {
return i; /* matched, return now */
}
}
vpr_printf(TIO_MESSAGE_ERROR, "Expected mux not found.\n");
exit(1);
}
Reference in New Issue View Git Blame Copy Permalink