44e63ec98b
|
||
|---|---|---|
| abc_with_bb_support | ||
| ace2 | ||
| docs | ||
| fpga_flow | ||
| tutorial | ||
| vpr7_rram | ||
| .gitignore | ||
| .gitmodules | ||
| LICENSE | ||
| README.md | ||
| jupyter_example.ipynb | ||
README.md
Getting Started with FPGA-SPICE
Clone the OpenFPGA git repository:
git clone https://github.com/LNIS-Projects/OpenFPGA.git
There is a submodule in the repository so move to the OpenFPGA directory and clone that too:
cd OpenFPGA
git submodule init
git submodule update
Go to the VPR dirctory and build the tool:
cd ./vpr7_rram/vpr/
make
VPR requires a minimum of one XML file that specifies the architecture of the FPGA, and one BLIF file that specifies the logic circuit to be put on the FPGA.
While in the vpr directory, run the tool on some example files:
./vpr ../libarchfpga/arch/sample_arch.xml ./Circuits/s298_K6_N10_ace.blif
If a graphic environment is available, this will bring up a display of how the circuit is being placed on the FPGA. Press the Proceed button to step to the final placement, press Proceed again to step to the routing. Press the Exit button to exit the display.
To run VPR without the display, use the command -nodisp
./vpr ../libarchfpga/arch/sample_arch.xml ./Circuits/s298_K6_N10_ace.blif -nodisp
VPR creates a number of files in the same location as the BLIF file when it is run. The place file shows how the circuit was placed on the FPGA; the route file shows how the logic was routed on the FPGA; the net file shows the wiring.