60 lines
2.8 KiB
Plaintext
60 lines
2.8 KiB
Plaintext
# Run VPR for the 'and' design
|
|
vpr ./test_vpr_arch/k6_frac_N10_tileable_40nm.xml ./test_blif/and.blif --clock_modeling route #--write_rr_graph example_rr_graph.xml
|
|
|
|
# Read OpenFPGA architecture definition
|
|
read_openfpga_arch -f ./test_openfpga_arch/k6_frac_N10_stdcell_mux_40nm_openfpga.xml
|
|
|
|
# Write out the architecture XML as a proof
|
|
#write_openfpga_arch -f ./arch_echo.xml
|
|
|
|
# Annotate the OpenFPGA architecture to VPR data base
|
|
link_openfpga_arch --activity_file ./test_blif/and.act --sort_gsb_chan_node_in_edges #--verbose
|
|
|
|
# Check and correct any naming conflicts in the BLIF netlist
|
|
check_netlist_naming_conflict --fix --report ./netlist_renaming.xml
|
|
|
|
# Apply fix-up to clustering nets based on routing results
|
|
pb_pin_fixup --verbose
|
|
|
|
# Apply fix-up to Look-Up Table truth tables based on packing results
|
|
lut_truth_table_fixup #--verbose
|
|
|
|
# Build the module graph
|
|
# - Enabled compression on routing architecture modules
|
|
# - Enable pin duplication on grid modules
|
|
build_fabric --compress_routing --duplicate_grid_pin #--verbose
|
|
|
|
# Repack the netlist to physical pbs
|
|
# This must be done before bitstream generator and testbench generation
|
|
# Strongly recommend it is done after all the fix-up have been applied
|
|
repack #--verbose
|
|
|
|
# Build the bitstream
|
|
# - Output the fabric-independent bitstream to a file
|
|
build_architecture_bitstream --verbose --file /var/tmp/xtang/openfpga_test_src/fabric_indepenent_bitstream.xml
|
|
|
|
# Build fabric-dependent bitstream
|
|
build_fabric_bitstream --verbose
|
|
|
|
# Write the Verilog netlist for FPGA fabric
|
|
# - Enable the use of explicit port mapping in Verilog netlist
|
|
write_fabric_verilog --file /var/tmp/xtang/openfpga_test_src/SRC --explicit_port_mapping --include_timing --include_signal_init --support_icarus_simulator --print_user_defined_template --verbose
|
|
|
|
# Write the Verilog testbench for FPGA fabric
|
|
# - We suggest the use of same output directory as fabric Verilog netlists
|
|
# - Must specify the reference benchmark file if you want to output any testbenches
|
|
# - Enable top-level testbench which is a full verification including programming circuit and core logic of FPGA
|
|
# - Enable pre-configured top-level testbench which is a fast verification skipping programming phase
|
|
# - Simulation ini file is optional and is needed only when you need to interface different HDL simulators using openfpga flow-run scripts
|
|
write_verilog_testbench --file /var/tmp/xtang/openfpga_test_src/SRC --reference_benchmark_file_path /var/tmp/xtang/and.v --print_top_testbench --print_preconfig_top_testbench --print_simulation_ini /var/tmp/xtang/openfpga_test_src/simulation_deck.ini
|
|
|
|
# Write the SDC files for PnR backend
|
|
# - Turn on every options here
|
|
write_pnr_sdc --file /var/tmp/xtang/openfpga_test_src/SDC
|
|
|
|
# Write the SDC to run timing analysis for a mapped FPGA fabric
|
|
write_analysis_sdc --file /var/tmp/xtang/openfpga_test_src/SDC_analysis
|
|
|
|
# Finish and exit OpenFPGA
|
|
exit
|