# tcl.m4 -- # # This file provides a set of autoconf macros to help TEA-enable # a Tcl extension. # # Copyright (c) 1999-2000 Ajuba Solutions. # Copyright (c) 2002-2005 ActiveState Corporation. # # See the file "license.terms" for information on usage and redistribution # of this file, and for a DISCLAIMER OF ALL WARRANTIES. AC_PREREQ([2.69]) # Possible values for key variables defined: # # TEA_WINDOWINGSYSTEM - win32 aqua x11 (mirrors 'tk windowingsystem') # TEA_PLATFORM - windows unix # TEA_TK_EXTENSION - True if this is a Tk extension # #------------------------------------------------------------------------ # TEA_PATH_TCLCONFIG -- # # Locate the tclConfig.sh file and perform a sanity check on # the Tcl compile flags # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --with-tcl=... # # Defines the following vars: # TCL_BIN_DIR Full path to the directory containing # the tclConfig.sh file #------------------------------------------------------------------------ AC_DEFUN([TEA_PATH_TCLCONFIG], [ dnl TEA specific: Make sure we are initialized AC_REQUIRE([TEA_INIT]) # # Ok, lets find the tcl configuration # First, look for one uninstalled. # the alternative search directory is invoked by --with-tcl # if test x"${no_tcl}" = x ; then # we reset no_tcl in case something fails here no_tcl=true AC_ARG_WITH(tcl, AS_HELP_STRING([--with-tcl], [directory containing tcl configuration (tclConfig.sh)]), [with_tclconfig="${withval}"]) AC_MSG_CHECKING([for Tcl configuration]) AC_CACHE_VAL(ac_cv_c_tclconfig,[ # First check to see if --with-tcl was specified. if test x"${with_tclconfig}" != x ; then case "${with_tclconfig}" in */tclConfig.sh ) if test -f "${with_tclconfig}"; then AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself]) with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`" fi ;; esac if test -f "${with_tclconfig}/tclConfig.sh" ; then ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`" else AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) fi fi # then check for a private Tcl installation if test x"${ac_cv_c_tclconfig}" = x ; then for i in \ ../tcl \ `ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ ../../tcl \ `ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ ../../../tcl \ `ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do if test "${TEA_PLATFORM}" = "windows" \ -a -f "$i/win/tclConfig.sh" ; then ac_cv_c_tclconfig="`(cd $i/win; pwd)`" break fi if test -f "$i/unix/tclConfig.sh" ; then ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" break fi done fi # on Darwin, check in Framework installation locations if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ `ls -d /Library/Frameworks 2>/dev/null` \ `ls -d /Network/Library/Frameworks 2>/dev/null` \ `ls -d /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/Library/Frameworks/Tcl.framework 2>/dev/null` \ `ls -d /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/Network/Library/Frameworks/Tcl.framework 2>/dev/null` \ `ls -d /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/System/Library/Frameworks/Tcl.framework 2>/dev/null` \ ; do if test -f "$i/Tcl.framework/tclConfig.sh" ; then ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`" break fi done fi # TEA specific: on Windows, check in common installation locations if test "${TEA_PLATFORM}" = "windows" \ -a x"${ac_cv_c_tclconfig}" = x ; then for i in `ls -d C:/Tcl/lib 2>/dev/null` \ `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ ; do if test -f "$i/tclConfig.sh" ; then ac_cv_c_tclconfig="`(cd $i; pwd)`" break fi done fi # check in a few common install locations if test x"${ac_cv_c_tclconfig}" = x ; then for i in `ls -d ${libdir} 2>/dev/null` \ `ls -d ${exec_prefix}/lib 2>/dev/null` \ `ls -d ${prefix}/lib 2>/dev/null` \ `ls -d /usr/local/lib 2>/dev/null` \ `ls -d /usr/contrib/lib 2>/dev/null` \ `ls -d /usr/pkg/lib 2>/dev/null` \ `ls -d /usr/lib 2>/dev/null` \ `ls -d /usr/lib64 2>/dev/null` \ `ls -d /usr/lib/tcl8.6 2>/dev/null` \ `ls -d /usr/lib/tcl8.5 2>/dev/null` \ `ls -d /usr/local/lib/tcl8.6 2>/dev/null` \ `ls -d /usr/local/lib/tcl8.5 2>/dev/null` \ `ls -d /usr/local/lib/tcl/tcl8.6 2>/dev/null` \ `ls -d /usr/local/lib/tcl/tcl8.5 2>/dev/null` \ ; do if test -f "$i/tclConfig.sh" ; then ac_cv_c_tclconfig="`(cd $i; pwd)`" break fi done fi # check in a few other private locations if test x"${ac_cv_c_tclconfig}" = x ; then for i in \ ${srcdir}/../tcl \ `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do if test "${TEA_PLATFORM}" = "windows" \ -a -f "$i/win/tclConfig.sh" ; then ac_cv_c_tclconfig="`(cd $i/win; pwd)`" break fi if test -f "$i/unix/tclConfig.sh" ; then ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" break fi done fi ]) if test x"${ac_cv_c_tclconfig}" = x ; then TCL_BIN_DIR="# no Tcl configs found" AC_MSG_ERROR([Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh]) else no_tcl= TCL_BIN_DIR="${ac_cv_c_tclconfig}" AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh]) fi fi ]) #------------------------------------------------------------------------ # TEA_PATH_TKCONFIG -- # # Locate the tkConfig.sh file # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --with-tk=... # # Defines the following vars: # TK_BIN_DIR Full path to the directory containing # the tkConfig.sh file #------------------------------------------------------------------------ AC_DEFUN([TEA_PATH_TKCONFIG], [ # # Ok, lets find the tk configuration # First, look for one uninstalled. # the alternative search directory is invoked by --with-tk # if test x"${no_tk}" = x ; then # we reset no_tk in case something fails here no_tk=true AC_ARG_WITH(tk, AS_HELP_STRING([--with-tk], [directory containing tk configuration (tkConfig.sh)]), [with_tkconfig="${withval}"]) AC_MSG_CHECKING([for Tk configuration]) AC_CACHE_VAL(ac_cv_c_tkconfig,[ # First check to see if --with-tkconfig was specified. if test x"${with_tkconfig}" != x ; then case "${with_tkconfig}" in */tkConfig.sh ) if test -f "${with_tkconfig}"; then AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself]) with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`" fi ;; esac if test -f "${with_tkconfig}/tkConfig.sh" ; then ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`" else AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) fi fi # then check for a private Tk library if test x"${ac_cv_c_tkconfig}" = x ; then for i in \ ../tk \ `ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ ../../tk \ `ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ ../../../tk \ `ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do if test "${TEA_PLATFORM}" = "windows" \ -a -f "$i/win/tkConfig.sh" ; then ac_cv_c_tkconfig="`(cd $i/win; pwd)`" break fi if test -f "$i/unix/tkConfig.sh" ; then ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" break fi done fi # on Darwin, check in Framework installation locations if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ `ls -d /Library/Frameworks 2>/dev/null` \ `ls -d /Network/Library/Frameworks 2>/dev/null` \ ; do if test -f "$i/Tk.framework/tkConfig.sh" ; then ac_cv_c_tkconfig="`(cd $i/Tk.framework; pwd)`" break fi done fi # check in a few common install locations if test x"${ac_cv_c_tkconfig}" = x ; then for i in `ls -d ${libdir} 2>/dev/null` \ `ls -d ${exec_prefix}/lib 2>/dev/null` \ `ls -d ${prefix}/lib 2>/dev/null` \ `ls -d /usr/local/lib 2>/dev/null` \ `ls -d /usr/contrib/lib 2>/dev/null` \ `ls -d /usr/pkg/lib 2>/dev/null` \ `ls -d /usr/lib/tk8.6 2>/dev/null` \ `ls -d /usr/lib/tk8.5 2>/dev/null` \ `ls -d /usr/lib 2>/dev/null` \ `ls -d /usr/lib64 2>/dev/null` \ `ls -d /usr/local/lib/tk8.6 2>/dev/null` \ `ls -d /usr/local/lib/tk8.5 2>/dev/null` \ `ls -d /usr/local/lib/tcl/tk8.6 2>/dev/null` \ `ls -d /usr/local/lib/tcl/tk8.5 2>/dev/null` \ ; do if test -f "$i/tkConfig.sh" ; then ac_cv_c_tkconfig="`(cd $i; pwd)`" break fi done fi # TEA specific: on Windows, check in common installation locations if test "${TEA_PLATFORM}" = "windows" \ -a x"${ac_cv_c_tkconfig}" = x ; then for i in `ls -d C:/Tcl/lib 2>/dev/null` \ `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ ; do if test -f "$i/tkConfig.sh" ; then ac_cv_c_tkconfig="`(cd $i; pwd)`" break fi done fi # check in a few other private locations if test x"${ac_cv_c_tkconfig}" = x ; then for i in \ ${srcdir}/../tk \ `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do if test "${TEA_PLATFORM}" = "windows" \ -a -f "$i/win/tkConfig.sh" ; then ac_cv_c_tkconfig="`(cd $i/win; pwd)`" break fi if test -f "$i/unix/tkConfig.sh" ; then ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" break fi done fi ]) if test x"${ac_cv_c_tkconfig}" = x ; then TK_BIN_DIR="# no Tk configs found" AC_MSG_ERROR([Can't find Tk configuration definitions. Use --with-tk to specify a directory containing tkConfig.sh]) else no_tk= TK_BIN_DIR="${ac_cv_c_tkconfig}" AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh]) fi fi ]) #------------------------------------------------------------------------ # TEA_LOAD_TCLCONFIG -- # # Load the tclConfig.sh file # # Arguments: # # Requires the following vars to be set: # TCL_BIN_DIR # # Results: # # Substitutes the following vars: # TCL_BIN_DIR # TCL_SRC_DIR # TCL_LIB_FILE # TCL_ZIP_FILE # TCL_ZIPFS_SUPPORT #------------------------------------------------------------------------ AC_DEFUN([TEA_LOAD_TCLCONFIG], [ AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh]) if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then AC_MSG_RESULT([loading]) . "${TCL_BIN_DIR}/tclConfig.sh" else AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh]) fi # If the TCL_BIN_DIR is the build directory (not the install directory), # then set the common variable name to the value of the build variables. # For example, the variable TCL_LIB_SPEC will be set to the value # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC # instead of TCL_BUILD_LIB_SPEC since it will work with both an # installed and uninstalled version of Tcl. if test -f "${TCL_BIN_DIR}/Makefile" ; then TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}" TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}" TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}" elif test "`uname -s`" = "Darwin"; then # If Tcl was built as a framework, attempt to use the libraries # from the framework at the given location so that linking works # against Tcl.framework installed in an arbitrary location. case ${TCL_DEFS} in *TCL_FRAMEWORK*) if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then for i in "`cd "${TCL_BIN_DIR}"; pwd`" \ "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}" break fi done fi if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}" TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" fi ;; esac fi AC_SUBST(TCL_VERSION) AC_SUBST(TCL_PATCH_LEVEL) AC_SUBST(TCL_BIN_DIR) AC_SUBST(TCL_SRC_DIR) AC_SUBST(TCL_LIB_FILE) AC_SUBST(TCL_LIB_FLAG) AC_SUBST(TCL_LIB_SPEC) AC_SUBST(TCL_STUB_LIB_FILE) AC_SUBST(TCL_STUB_LIB_FLAG) AC_SUBST(TCL_STUB_LIB_SPEC) AC_MSG_CHECKING([platform]) hold_cc=$CC; CC="$TCL_CC" AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[ #ifdef _WIN32 #error win32 #endif ]])],[ # first test we've already retrieved platform (cross-compile), fallback to unix otherwise: TEA_PLATFORM="${TEA_PLATFORM-unix}" CYGPATH=echo ],[ TEA_PLATFORM="windows" AC_CHECK_PROG(CYGPATH, cygpath, cygpath -m, echo) ]) CC=$hold_cc AC_MSG_RESULT($TEA_PLATFORM) # The BUILD_$pkg is to define the correct extern storage class # handling when making this package AC_DEFINE_UNQUOTED(BUILD_${PACKAGE_NAME}, [], [Building extension source?]) # Do this here as we have fully defined TEA_PLATFORM now if test "${TEA_PLATFORM}" = "windows" ; then EXEEXT=".exe" CLEANFILES="$CLEANFILES *.lib *.dll *.pdb *.exp" fi # TEA specific: AC_SUBST(CLEANFILES) AC_SUBST(TCL_LIBS) AC_SUBST(TCL_DEFS) AC_SUBST(TCL_EXTRA_CFLAGS) AC_SUBST(TCL_LD_FLAGS) AC_SUBST(TCL_SHLIB_LD_LIBS) ]) #------------------------------------------------------------------------ # TEA_LOAD_TKCONFIG -- # # Load the tkConfig.sh file # # Arguments: # # Requires the following vars to be set: # TK_BIN_DIR # # Results: # # Sets the following vars that should be in tkConfig.sh: # TK_BIN_DIR #------------------------------------------------------------------------ AC_DEFUN([TEA_LOAD_TKCONFIG], [ AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh]) if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then AC_MSG_RESULT([loading]) . "${TK_BIN_DIR}/tkConfig.sh" else AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh]) fi # If the TK_BIN_DIR is the build directory (not the install directory), # then set the common variable name to the value of the build variables. # For example, the variable TK_LIB_SPEC will be set to the value # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC # instead of TK_BUILD_LIB_SPEC since it will work with both an # installed and uninstalled version of Tcl. if test -f "${TK_BIN_DIR}/Makefile" ; then TK_LIB_SPEC="${TK_BUILD_LIB_SPEC}" TK_STUB_LIB_SPEC="${TK_BUILD_STUB_LIB_SPEC}" TK_STUB_LIB_PATH="${TK_BUILD_STUB_LIB_PATH}" elif test "`uname -s`" = "Darwin"; then # If Tk was built as a framework, attempt to use the libraries # from the framework at the given location so that linking works # against Tk.framework installed in an arbitrary location. case ${TK_DEFS} in *TK_FRAMEWORK*) if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then for i in "`cd "${TK_BIN_DIR}"; pwd`" \ "`cd "${TK_BIN_DIR}"/../..; pwd`"; do if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then TK_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TK_LIB_FILE}" break fi done fi if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then TK_STUB_LIB_SPEC="-L` echo "${TK_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TK_STUB_LIB_FLAG}" TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}" fi ;; esac fi # TEA specific: Ensure windowingsystem is defined if test "${TEA_PLATFORM}" = "unix" ; then case ${TK_DEFS} in *MAC_OSX_TK*) AC_DEFINE(MAC_OSX_TK, 1, [Are we building against Mac OS X TkAqua?]) TEA_WINDOWINGSYSTEM="aqua" ;; *) TEA_WINDOWINGSYSTEM="x11" ;; esac elif test "${TEA_PLATFORM}" = "windows" ; then TEA_WINDOWINGSYSTEM="win32" fi AC_SUBST(TK_VERSION) AC_SUBST(TK_BIN_DIR) AC_SUBST(TK_SRC_DIR) AC_SUBST(TK_LIB_FILE) AC_SUBST(TK_LIB_FLAG) AC_SUBST(TK_LIB_SPEC) AC_SUBST(TK_STUB_LIB_FILE) AC_SUBST(TK_STUB_LIB_FLAG) AC_SUBST(TK_STUB_LIB_SPEC) # TEA specific: AC_SUBST(TK_LIBS) AC_SUBST(TK_XINCLUDES) ]) #------------------------------------------------------------------------ # TEA_PROG_TCLSH # Determine the fully qualified path name of the tclsh executable # in the Tcl build directory or the tclsh installed in a bin # directory. This macro will correctly determine the name # of the tclsh executable even if tclsh has not yet been # built in the build directory. The tclsh found is always # associated with a tclConfig.sh file. This tclsh should be used # only for running extension test cases. It should never be # or generation of files (like pkgIndex.tcl) at build time. # # Arguments: # none # # Results: # Substitutes the following vars: # TCLSH_PROG #------------------------------------------------------------------------ AC_DEFUN([TEA_PROG_TCLSH], [ AC_MSG_CHECKING([for tclsh]) if test -f "${TCL_BIN_DIR}/Makefile" ; then # tclConfig.sh is in Tcl build directory if test "${TEA_PLATFORM}" = "windows"; then if test -f "${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${EXEEXT}" ; then TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${EXEEXT}" elif test -f "${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}s${EXEEXT}" ; then TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}s${EXEEXT}" elif test -f "${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}t${EXEEXT}" ; then TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}t${EXEEXT}" elif test -f "${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}st${EXEEXT}" ; then TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}st${EXEEXT}" fi else TCLSH_PROG="${TCL_BIN_DIR}/tclsh" fi else # tclConfig.sh is in install location if test "${TEA_PLATFORM}" = "windows"; then TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${EXEEXT}" else TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}" fi list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \ `ls -d ${TCL_BIN_DIR}/.. 2>/dev/null` \ `ls -d ${TCL_PREFIX}/bin 2>/dev/null`" for i in $list ; do if test -f "$i/${TCLSH_PROG}" ; then REAL_TCL_BIN_DIR="`cd "$i"; pwd`/" break fi done TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}" fi AC_MSG_RESULT([${TCLSH_PROG}]) AC_SUBST(TCLSH_PROG) ]) #------------------------------------------------------------------------ # TEA_PROG_WISH # Determine the fully qualified path name of the wish executable # in the Tk build directory or the wish installed in a bin # directory. This macro will correctly determine the name # of the wish executable even if wish has not yet been # built in the build directory. The wish found is always # associated with a tkConfig.sh file. This wish should be used # only for running extension test cases. It should never be # or generation of files (like pkgIndex.tcl) at build time. # # Arguments: # none # # Results: # Substitutes the following vars: # WISH_PROG #------------------------------------------------------------------------ AC_DEFUN([TEA_PROG_WISH], [ AC_MSG_CHECKING([for wish]) if test -f "${TK_BIN_DIR}/Makefile" ; then # tkConfig.sh is in Tk build directory if test "${TEA_PLATFORM}" = "windows"; then if test -f "${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${EXEEXT}" ; then WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${EXEEXT}" elif test -f "${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}s${EXEEXT}" ; then WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}$s{EXEEXT}" elif test -f "${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}t${EXEEXT}" ; then WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}t${EXEEXT}" elif test -f "${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}st${EXEEXT}" ; then WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}st${EXEEXT}" fi else WISH_PROG="${TK_BIN_DIR}/wish" fi else # tkConfig.sh is in install location if test "${TEA_PLATFORM}" = "windows"; then WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${EXEEXT}" else WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}" fi list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \ `ls -d ${TK_BIN_DIR}/.. 2>/dev/null` \ `ls -d ${TK_PREFIX}/bin 2>/dev/null`" for i in $list ; do if test -f "$i/${WISH_PROG}" ; then REAL_TK_BIN_DIR="`cd "$i"; pwd`/" break fi done WISH_PROG="${REAL_TK_BIN_DIR}${WISH_PROG}" fi AC_MSG_RESULT([${WISH_PROG}]) AC_SUBST(WISH_PROG) ]) #------------------------------------------------------------------------ # TEA_ENABLE_SHARED -- # # Allows the building of shared libraries # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --enable-shared=yes|no # --enable-stubs=yes|no # # Defines the following vars: # STATIC_BUILD Used for building import/export libraries # on Windows. # # Sets the following vars: # SHARED_BUILD Value of 1 or 0 # STUBS_BUILD Value if 1 or 0 # USE_TCL_STUBS Value true: if SHARED_BUILD or --enable-stubs # USE_TCLOO_STUBS Value true: if SHARED_BUILD or --enable-stubs # USE_TK_STUBS Value true: if SHARED_BUILD or --enable-stubs # AND TEA_WINDOWING_SYSTEM != "" #------------------------------------------------------------------------ AC_DEFUN([TEA_ENABLE_SHARED], [ AC_MSG_CHECKING([how to build libraries]) AC_ARG_ENABLE(shared, AS_HELP_STRING([--enable-shared], [build and link with shared libraries (default: on)]), [shared_ok=$enableval], [shared_ok=yes]) if test "${enable_shared+set}" = set; then enableval="$enable_shared" shared_ok=$enableval else shared_ok=yes fi AC_ARG_ENABLE(stubs, AS_HELP_STRING([--enable-stubs], [build and link with stub libraries. Always true for shared builds (default: on)]), [stubs_ok=$enableval], [stubs_ok=yes]) if test "${enable_stubs+set}" = set; then enableval="$enable_stubs" stubs_ok=$enableval else stubs_ok=yes fi # Stubs are always enabled for shared builds if test "$shared_ok" = "yes" ; then AC_MSG_RESULT([shared]) SHARED_BUILD=1 STUBS_BUILD=1 else AC_MSG_RESULT([static]) SHARED_BUILD=0 AC_DEFINE(STATIC_BUILD, 1, [This a static build]) if test "$stubs_ok" = "yes" ; then STUBS_BUILD=1 else STUBS_BUILD=0 fi fi if test "${STUBS_BUILD}" = "1" ; then AC_DEFINE(USE_TCL_STUBS, 1, [Use Tcl stubs]) AC_DEFINE(USE_TCLOO_STUBS, 1, [Use TclOO stubs]) if test "${TEA_WINDOWINGSYSTEM}" != ""; then AC_DEFINE(USE_TK_STUBS, 1, [Use Tk stubs]) fi fi AC_SUBST(SHARED_BUILD) AC_SUBST(STUBS_BUILD) ]) #------------------------------------------------------------------------ # TEA_ENABLE_THREADS -- # # Specify if thread support should be enabled. If "yes" is specified # as an arg (optional), threads are enabled by default, "no" means # threads are disabled. "yes" is the default. # # TCL_THREADS is checked so that if you are compiling an extension # against a threaded core, your extension must be compiled threaded # as well. # # Note that it is legal to have a thread enabled extension run in a # threaded or non-threaded Tcl core, but a non-threaded extension may # only run in a non-threaded Tcl core. # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --enable-threads # # Sets the following vars: # THREADS_LIBS Thread library(s) # # Defines the following vars: # TCL_THREADS # _REENTRANT # _THREAD_SAFE #------------------------------------------------------------------------ AC_DEFUN([TEA_ENABLE_THREADS], [ AC_ARG_ENABLE(threads, AS_HELP_STRING([--enable-threads], [build with threads (default: on)]), [tcl_ok=$enableval], [tcl_ok=yes]) if test "${enable_threads+set}" = set; then enableval="$enable_threads" tcl_ok=$enableval else tcl_ok=yes fi if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then TCL_THREADS=1 if test "${TEA_PLATFORM}" != "windows" ; then # We are always OK on Windows, so check what this platform wants: # USE_THREAD_ALLOC tells us to try the special thread-based # allocator that significantly reduces lock contention AC_DEFINE(USE_THREAD_ALLOC, 1, [Do we want to use the threaded memory allocator?]) AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) if test "`uname -s`" = "SunOS" ; then AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, [Do we really want to follow the standard? Yes we do!]) fi AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?]) AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) if test "$tcl_ok" = "no"; then # Check a little harder for __pthread_mutex_init in the same # library, as some systems hide it there until pthread.h is # defined. We could alternatively do an AC_TRY_COMPILE with # pthread.h, but that will work with libpthread really doesn't # exist, like AIX 4.2. [Bug: 4359] AC_CHECK_LIB(pthread, __pthread_mutex_init, tcl_ok=yes, tcl_ok=no) fi if test "$tcl_ok" = "yes"; then # The space is needed THREADS_LIBS=" -lpthread" else AC_CHECK_LIB(pthreads, pthread_mutex_init, tcl_ok=yes, tcl_ok=no) if test "$tcl_ok" = "yes"; then # The space is needed THREADS_LIBS=" -lpthreads" else AC_CHECK_LIB(c, pthread_mutex_init, tcl_ok=yes, tcl_ok=no) if test "$tcl_ok" = "no"; then AC_CHECK_LIB(c_r, pthread_mutex_init, tcl_ok=yes, tcl_ok=no) if test "$tcl_ok" = "yes"; then # The space is needed THREADS_LIBS=" -pthread" else TCL_THREADS=0 AC_MSG_WARN([Do not know how to find pthread lib on your system - thread support disabled]) fi fi fi fi fi else TCL_THREADS=0 fi # Do checking message here to not mess up interleaved configure output AC_MSG_CHECKING([for building with threads]) if test "${TCL_THREADS}" = 1; then AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?]) AC_MSG_RESULT([yes (default)]) else AC_MSG_RESULT([no]) fi # TCL_THREADS sanity checking. See if our request for building with # threads is the same as the way Tcl was built. If not, warn the user. case ${TCL_DEFS} in *THREADS=1*) if test "${TCL_THREADS}" = "0"; then AC_MSG_WARN([ Building ${PACKAGE_NAME} without threads enabled, but building against Tcl that IS thread-enabled. It is recommended to use --enable-threads.]) fi ;; esac AC_SUBST(TCL_THREADS) ]) #------------------------------------------------------------------------ # TEA_ENABLE_SYMBOLS -- # # Specify if debugging symbols should be used. # Memory (TCL_MEM_DEBUG) debugging can also be enabled. # # Arguments: # none # # TEA varies from core Tcl in that C|LDFLAGS_DEFAULT receives # the value of C|LDFLAGS_OPTIMIZE|DEBUG already substituted. # Requires the following vars to be set in the Makefile: # CFLAGS_DEFAULT # LDFLAGS_DEFAULT # # Results: # # Adds the following arguments to configure: # --enable-symbols # # Defines the following vars: # CFLAGS_DEFAULT Sets to $(CFLAGS_DEBUG) if true # Sets to "$(CFLAGS_OPTIMIZE) -DNDEBUG" if false # LDFLAGS_DEFAULT Sets to $(LDFLAGS_DEBUG) if true # Sets to $(LDFLAGS_OPTIMIZE) if false #------------------------------------------------------------------------ AC_DEFUN([TEA_ENABLE_SYMBOLS], [ dnl TEA specific: Make sure we are initialized AC_REQUIRE([TEA_CONFIG_CFLAGS]) AC_MSG_CHECKING([for build with symbols]) AC_ARG_ENABLE(symbols, AS_HELP_STRING([--enable-symbols], [build with debugging symbols (default: off)]), [tcl_ok=$enableval], [tcl_ok=no]) if test "$tcl_ok" = "no"; then CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE} -DNDEBUG" LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" AC_MSG_RESULT([no]) AC_DEFINE(TCL_CFG_OPTIMIZED, 1, [Is this an optimized build?]) else CFLAGS_DEFAULT="${CFLAGS_DEBUG}" LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" if test "$tcl_ok" = "yes"; then AC_MSG_RESULT([yes (standard debugging)]) fi fi AC_SUBST(CFLAGS_DEFAULT) AC_SUBST(LDFLAGS_DEFAULT) if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?]) fi if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then if test "$tcl_ok" = "all"; then AC_MSG_RESULT([enabled symbols mem debugging]) else AC_MSG_RESULT([enabled $tcl_ok debugging]) fi fi ]) #------------------------------------------------------------------------ # TEA_ENABLE_LANGINFO -- # # Allows use of modern nl_langinfo check for better l10n. # This is only relevant for Unix. # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --enable-langinfo=yes|no (default is yes) # # Defines the following vars: # HAVE_LANGINFO Triggers use of nl_langinfo if defined. #------------------------------------------------------------------------ AC_DEFUN([TEA_ENABLE_LANGINFO], [ AC_ARG_ENABLE(langinfo, AS_HELP_STRING([--enable-langinfo], [use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic (default: on)]), [langinfo_ok=$enableval], [langinfo_ok=yes]) HAVE_LANGINFO=0 if test "$langinfo_ok" = "yes"; then AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no]) fi AC_MSG_CHECKING([whether to use nl_langinfo]) if test "$langinfo_ok" = "yes"; then AC_CACHE_VAL(tcl_cv_langinfo_h, [ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[nl_langinfo(CODESET);]])], [tcl_cv_langinfo_h=yes],[tcl_cv_langinfo_h=no])]) AC_MSG_RESULT([$tcl_cv_langinfo_h]) if test $tcl_cv_langinfo_h = yes; then AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?]) fi else AC_MSG_RESULT([$langinfo_ok]) fi ]) #-------------------------------------------------------------------- # TEA_CONFIG_SYSTEM # # Determine what the system is (some things cannot be easily checked # on a feature-driven basis, alas). This can usually be done via the # "uname" command. # # Arguments: # none # # Results: # Defines the following var: # # system - System/platform/version identification code. # #-------------------------------------------------------------------- AC_DEFUN([TEA_CONFIG_SYSTEM], [ AC_CACHE_CHECK([system version], tcl_cv_sys_version, [ # TEA specific: if test "${TEA_PLATFORM}" = "windows" ; then tcl_cv_sys_version=windows else tcl_cv_sys_version=`uname -s`-`uname -r` if test "$?" -ne 0 ; then AC_MSG_WARN([can't find uname command]) tcl_cv_sys_version=unknown else if test "`uname -s`" = "AIX" ; then tcl_cv_sys_version=AIX-`uname -v`.`uname -r` fi if test "`uname -s`" = "NetBSD" -a -f /etc/debian_version ; then tcl_cv_sys_version=NetBSD-Debian fi fi fi ]) system=$tcl_cv_sys_version ]) #-------------------------------------------------------------------- # TEA_CONFIG_CFLAGS # # Try to determine the proper flags to pass to the compiler # for building shared libraries and other such nonsense. # # Arguments: # none # # Results: # # Defines and substitutes the following vars: # # DL_OBJS, DL_LIBS - removed for TEA, only needed by core. # LDFLAGS - Flags to pass to the compiler when linking object # files into an executable application binary such # as tclsh. # LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", # that tell the run-time dynamic linker where to look # for shared libraries such as libtcl.so. Depends on # the variable LIB_RUNTIME_DIR in the Makefile. Could # be the same as CC_SEARCH_FLAGS if ${CC} is used to link. # CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib", # that tell the run-time dynamic linker where to look # for shared libraries such as libtcl.so. Depends on # the variable LIB_RUNTIME_DIR in the Makefile. # SHLIB_CFLAGS - Flags to pass to cc when compiling the components # of a shared library (may request position-independent # code, among other things). # SHLIB_LD - Base command to use for combining object files # into a shared library. # SHLIB_LD_LIBS - Dependent libraries for the linker to scan when # creating shared libraries. This symbol typically # goes at the end of the "ld" commands that build # shared libraries. The value of the symbol defaults to # "${LIBS}" if all of the dependent libraries should # be specified when creating a shared library. If # dependent libraries should not be specified (as on # SunOS 4.x, where they cause the link to fail, or in # general if Tcl and Tk aren't themselves shared # libraries), then this symbol has an empty string # as its value. # SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable # extensions. An empty string means we don't know how # to use shared libraries on this platform. # LIB_SUFFIX - Specifies everything that comes after the "libfoo" # in a static or shared library name, using the $PACKAGE_VERSION variable # to put the version in the right place. This is used # by platforms that need non-standard library names. # Examples: ${PACKAGE_VERSION}.so.1.1 on NetBSD, since it needs # to have a version after the .so, and ${PACKAGE_VERSION}.a # on AIX, since a shared library needs to have # a .a extension whereas shared objects for loadable # extensions have a .so extension. Defaults to # ${PACKAGE_VERSION}${SHLIB_SUFFIX}. # CFLAGS_DEBUG - # Flags used when running the compiler in debug mode # CFLAGS_OPTIMIZE - # Flags used when running the compiler in optimize mode # CFLAGS - Additional CFLAGS added as necessary (usually 64-bit) #-------------------------------------------------------------------- AC_DEFUN([TEA_CONFIG_CFLAGS], [ dnl TEA specific: Make sure we are initialized AC_REQUIRE([TEA_INIT]) # Step 0.a: Enable 64 bit support? AC_MSG_CHECKING([if 64bit support is requested]) AC_ARG_ENABLE(64bit, AS_HELP_STRING([--enable-64bit], [enable 64bit support (default: off)]), [do64bit=$enableval], [do64bit=no]) AC_MSG_RESULT([$do64bit]) # Step 0.b: Enable Solaris 64 bit VIS support? AC_MSG_CHECKING([if 64bit Sparc VIS support is requested]) AC_ARG_ENABLE(64bit-vis, AS_HELP_STRING([--enable-64bit-vis], [enable 64bit Sparc VIS support (default: off)]), [do64bitVIS=$enableval], [do64bitVIS=no]) AC_MSG_RESULT([$do64bitVIS]) # Force 64bit on with VIS AS_IF([test "$do64bitVIS" = "yes"], [do64bit=yes]) # Step 0.c: Check if visibility support is available. Do this here so # that platform specific alternatives can be used below if this fails. AC_CACHE_CHECK([if compiler supports visibility "hidden"], tcl_cv_cc_visibility_hidden, [ hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror" AC_LINK_IFELSE([AC_LANG_PROGRAM([[ extern __attribute__((__visibility__("hidden"))) void f(void); void f(void) {}]], [[f();]])],[tcl_cv_cc_visibility_hidden=yes], [tcl_cv_cc_visibility_hidden=no]) CFLAGS=$hold_cflags]) AS_IF([test $tcl_cv_cc_visibility_hidden = yes], [ AC_DEFINE(MODULE_SCOPE, [extern __attribute__((__visibility__("hidden")))], [Compiler support for module scope symbols]) AC_DEFINE(HAVE_HIDDEN, [1], [Compiler support for module scope symbols]) ]) # Step 0.d: Disable -rpath support? AC_MSG_CHECKING([if rpath support is requested]) AC_ARG_ENABLE(rpath, AS_HELP_STRING([--disable-rpath], [disable rpath support (default: on)]), [doRpath=$enableval], [doRpath=yes]) AC_MSG_RESULT([$doRpath]) # Set the variable "system" to hold the name and version number # for the system. TEA_CONFIG_SYSTEM # Require ranlib early so we can override it in special cases below. AC_REQUIRE([AC_PROG_RANLIB]) # Set configuration options based on system name and version. # This is similar to Tcl's unix/tcl.m4 except that we've added a # "windows" case and removed some core-only vars. do64bit_ok=no # default to '{$LIBS}' and set to "" on per-platform necessary basis SHLIB_LD_LIBS='${LIBS}' # When ld needs options to work in 64-bit mode, put them in # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load] # is disabled by the user. [Bug 1016796] LDFLAGS_ARCH="" UNSHARED_LIB_SUFFIX="" # TEA specific: use PACKAGE_VERSION instead of VERSION TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' ECHO_VERSION='`echo ${PACKAGE_VERSION}`' TCL_LIB_VERSIONS_OK=ok CFLAGS_DEBUG=-g AS_IF([test "$GCC" = yes], [ CFLAGS_OPTIMIZE=-O2 CFLAGS_WARNING="-Wall" ], [ CFLAGS_OPTIMIZE=-O CFLAGS_WARNING="" ]) AC_CHECK_TOOL(AR, ar) STLIB_LD='${AR} cr' LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" AS_IF([test "x$SHLIB_VERSION" = x],[SHLIB_VERSION=""],[SHLIB_VERSION=".$SHLIB_VERSION"]) case $system in # TEA specific: windows) MACHINE="X86" if test "$do64bit" != "no" ; then case "$do64bit" in amd64|x64|yes) MACHINE="AMD64" ; # default to AMD64 64-bit build ;; ia64) MACHINE="IA64" ;; esac fi if test "$GCC" != "yes" ; then if test "${SHARED_BUILD}" = "0" ; then runtime=-MT else runtime=-MD fi case "x`echo \${VisualStudioVersion}`" in x1[[4-9]]*) lflags="${lflags} -nodefaultlib:libucrt.lib" TEA_ADD_LIBS([ucrt.lib]) ;; *) ;; esac if test "$do64bit" != "no" ; then CC="cl.exe" RC="rc.exe" lflags="${lflags} -nologo -MACHINE:${MACHINE} " LINKBIN="link.exe" CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" # Avoid 'unresolved external symbol __security_cookie' # errors, c.f. http://support.microsoft.com/?id=894573 TEA_ADD_LIBS([bufferoverflowU.lib]) else RC="rc" lflags="${lflags} -nologo" LINKBIN="link" CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" fi fi if test "$GCC" = "yes"; then # mingw gcc mode AC_CHECK_TOOL(RC, windres) CFLAGS_DEBUG="-g" CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" SHLIB_LD='${CC} -shared' UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" AC_CACHE_CHECK(for cross-compile version of gcc, ac_cv_cross, AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ #ifdef _WIN32 #error cross-compiler #endif ]], [[]])], [ac_cv_cross=yes], [ac_cv_cross=no]) ) if test "$ac_cv_cross" = "yes"; then case "$do64bit" in amd64|x64|yes) CC="x86_64-w64-mingw32-${CC}" LD="x86_64-w64-mingw32-ld" AR="x86_64-w64-mingw32-ar" RANLIB="x86_64-w64-mingw32-ranlib" RC="x86_64-w64-mingw32-windres" ;; *) CC="i686-w64-mingw32-${CC}" LD="i686-w64-mingw32-ld" AR="i686-w64-mingw32-ar" RANLIB="i686-w64-mingw32-ranlib" RC="i686-w64-mingw32-windres" ;; esac fi else SHLIB_LD="${LINKBIN} -dll ${lflags}" # link -lib only works when -lib is the first arg STLIB_LD="${LINKBIN} -lib ${lflags}" UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib' PATHTYPE=-w # For information on what debugtype is most useful, see: # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp # and also # http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx # This essentially turns it all on. LDFLAGS_DEBUG="-debug -debugtype:cv" LDFLAGS_OPTIMIZE="-release" LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" fi SHLIB_SUFFIX=".dll" SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll' TCL_LIB_VERSIONS_OK=nodots ;; AIX-*) AS_IF([test "$GCC" != "yes"], [ # AIX requires the _r compiler when gcc isn't being used case "${CC}" in *_r|*_r\ *) # ok ... ;; *) # Make sure only first arg gets _r CC=`echo "$CC" | sed -e 's/^\([[^ ]]*\)/\1_r/'` ;; esac AC_MSG_RESULT([Using $CC for compiling with threads]) ]) LIBS="$LIBS -lc" SHLIB_CFLAGS="" SHLIB_SUFFIX=".so" LD_LIBRARY_PATH_VAR="LIBPATH" # Check to enable 64-bit flags for compiler/linker AS_IF([test "$do64bit" = yes], [ AS_IF([test "$GCC" = yes], [ AC_MSG_WARN([64bit mode not supported with GCC on $system]) ], [ do64bit_ok=yes CFLAGS="$CFLAGS -q64" LDFLAGS_ARCH="-q64" RANLIB="${RANLIB} -X64" AR="${AR} -X64" SHLIB_LD_FLAGS="-b64" ]) ]) AS_IF([test "`uname -m`" = ia64], [ # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC SHLIB_LD="/usr/ccs/bin/ld -G -z text" AS_IF([test "$GCC" = yes], [ CC_SEARCH_FLAGS='"-Wl,-R,${LIB_RUNTIME_DIR}"' ], [ CC_SEARCH_FLAGS='"-R${LIB_RUNTIME_DIR}"' ]) LD_SEARCH_FLAGS='-R "${LIB_RUNTIME_DIR}"' ], [ AS_IF([test "$GCC" = yes], [ SHLIB_LD='${CC} -shared -Wl,-bexpall' ], [ SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry" LDFLAGS="$LDFLAGS -brtl" ]) SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}" CC_SEARCH_FLAGS='"-L${LIB_RUNTIME_DIR}"' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} ]) ;; BeOS*) SHLIB_CFLAGS="-fPIC" SHLIB_LD='${CC} -nostart' SHLIB_SUFFIX=".so" #----------------------------------------------------------- # Check for inet_ntoa in -lbind, for BeOS (which also needs # -lsocket, even if the network functions are in -lnet which # is always linked to, for compatibility. #----------------------------------------------------------- AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"]) ;; BSD/OS-2.1*|BSD/OS-3*) SHLIB_CFLAGS="" SHLIB_LD="shlicc -r" SHLIB_SUFFIX=".so" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; BSD/OS-4.*) SHLIB_CFLAGS="-export-dynamic -fPIC" SHLIB_LD='${CC} -shared' SHLIB_SUFFIX=".so" LDFLAGS="$LDFLAGS -export-dynamic" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; CYGWIN_*) SHLIB_CFLAGS="" SHLIB_LD='${CC} -shared' SHLIB_SUFFIX=".dll" SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -Wl,--out-implib,\$[@].a" EXEEXT=".exe" do64bit_ok=yes CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; dgux*) SHLIB_CFLAGS="-K PIC" SHLIB_LD='${CC} -G' SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; Haiku*) LDFLAGS="$LDFLAGS -Wl,--export-dynamic" SHLIB_CFLAGS="-fPIC" SHLIB_SUFFIX=".so" SHLIB_LD='${CC} ${CFLAGS} ${LDFLAGS} -shared' AC_CHECK_LIB(network, inet_ntoa, [LIBS="$LIBS -lnetwork"]) ;; HP-UX-*.11.*) # Use updated header definitions where possible AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?]) # TEA specific: Needed by Tcl, but not most extensions #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?]) #LIBS="$LIBS -lxnet" # Use the XOPEN network library AS_IF([test "`uname -m`" = ia64], [ SHLIB_SUFFIX=".so" ], [ SHLIB_SUFFIX=".sl" ]) AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) AS_IF([test "$tcl_ok" = yes], [ SHLIB_CFLAGS="+z" SHLIB_LD="ld -b" LDFLAGS="$LDFLAGS -Wl,-E" CC_SEARCH_FLAGS='"-Wl,+s,+b,${LIB_RUNTIME_DIR}:."' LD_SEARCH_FLAGS='+s +b "${LIB_RUNTIME_DIR}:."' LD_LIBRARY_PATH_VAR="SHLIB_PATH" ]) AS_IF([test "$GCC" = yes], [ SHLIB_LD='${CC} -shared' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} ], [ CFLAGS="$CFLAGS -z" ]) # Check to enable 64-bit flags for compiler/linker AS_IF([test "$do64bit" = "yes"], [ AS_IF([test "$GCC" = yes], [ case `${CC} -dumpmachine` in hppa64*) # 64-bit gcc in use. Fix flags for GNU ld. do64bit_ok=yes SHLIB_LD='${CC} -shared' AS_IF([test $doRpath = yes], [ CC_SEARCH_FLAGS='"-Wl,-rpath,${LIB_RUNTIME_DIR}"']) LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} ;; *) AC_MSG_WARN([64bit mode not supported with GCC on $system]) ;; esac ], [ do64bit_ok=yes CFLAGS="$CFLAGS +DD64" LDFLAGS_ARCH="+DD64" ]) ]) ;; HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*) SHLIB_SUFFIX=".sl" AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) AS_IF([test "$tcl_ok" = yes], [ SHLIB_CFLAGS="+z" SHLIB_LD="ld -b" SHLIB_LD_LIBS="" LDFLAGS="$LDFLAGS -Wl,-E" CC_SEARCH_FLAGS='"-Wl,+s,+b,${LIB_RUNTIME_DIR}:."' LD_SEARCH_FLAGS='+s +b "${LIB_RUNTIME_DIR}:."' LD_LIBRARY_PATH_VAR="SHLIB_PATH" ]) ;; IRIX-5.*) SHLIB_CFLAGS="" SHLIB_LD="ld -shared -rdata_shared" SHLIB_SUFFIX=".so" AC_LIBOBJ(mkstemp) AS_IF([test $doRpath = yes], [ CC_SEARCH_FLAGS='"-Wl,-rpath,${LIB_RUNTIME_DIR}"' LD_SEARCH_FLAGS='-rpath "${LIB_RUNTIME_DIR}"']) ;; IRIX-6.*) SHLIB_CFLAGS="" SHLIB_LD="ld -n32 -shared -rdata_shared" SHLIB_SUFFIX=".so" AS_IF([test $doRpath = yes], [ CC_SEARCH_FLAGS='"-Wl,-rpath,${LIB_RUNTIME_DIR}"' LD_SEARCH_FLAGS='-rpath "${LIB_RUNTIME_DIR}"']) AS_IF([test "$GCC" = yes], [ CFLAGS="$CFLAGS -mabi=n32" LDFLAGS="$LDFLAGS -mabi=n32" ], [ case $system in IRIX-6.3) # Use to build 6.2 compatible binaries on 6.3. CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" ;; *) CFLAGS="$CFLAGS -n32" ;; esac LDFLAGS="$LDFLAGS -n32" ]) ;; IRIX64-6.*) SHLIB_CFLAGS="" SHLIB_LD="ld -n32 -shared -rdata_shared" SHLIB_SUFFIX=".so" AS_IF([test $doRpath = yes], [ CC_SEARCH_FLAGS='"-Wl,-rpath,${LIB_RUNTIME_DIR}"' LD_SEARCH_FLAGS='-rpath "${LIB_RUNTIME_DIR}"']) # Check to enable 64-bit flags for compiler/linker AS_IF([test "$do64bit" = yes], [ AS_IF([test "$GCC" = yes], [ AC_MSG_WARN([64bit mode not supported by gcc]) ], [ do64bit_ok=yes SHLIB_LD="ld -64 -shared -rdata_shared" CFLAGS="$CFLAGS -64" LDFLAGS_ARCH="-64" ]) ]) ;; Linux*|GNU*|NetBSD-Debian|DragonFly-*|FreeBSD-*) SHLIB_CFLAGS="-fPIC" SHLIB_SUFFIX=".so" # TEA specific: CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS SHLIB_LD='${CC} ${CFLAGS} ${LDFLAGS_DEFAULT} -shared' LDFLAGS="$LDFLAGS -Wl,--export-dynamic" case $system in DragonFly-*|FreeBSD-*) AS_IF([test "${TCL_THREADS}" = "1"], [ # The -pthread needs to go in the LDFLAGS, not LIBS LIBS=`echo $LIBS | sed s/-pthread//` CFLAGS="$CFLAGS $PTHREAD_CFLAGS" LDFLAGS="$LDFLAGS $PTHREAD_LIBS"]) ;; esac AS_IF([test $doRpath = yes], [ CC_SEARCH_FLAGS='"-Wl,-rpath,${LIB_RUNTIME_DIR}"']) LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"]) AS_IF([test $do64bit = yes], [ AC_CACHE_CHECK([if compiler accepts -m64 flag], tcl_cv_cc_m64, [ hold_cflags=$CFLAGS CFLAGS="$CFLAGS -m64" AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[]])], [tcl_cv_cc_m64=yes],[tcl_cv_cc_m64=no]) CFLAGS=$hold_cflags]) AS_IF([test $tcl_cv_cc_m64 = yes], [ CFLAGS="$CFLAGS -m64" do64bit_ok=yes ]) ]) # The combo of gcc + glibc has a bug related to inlining of # functions like strtod(). The -fno-builtin flag should address # this problem but it does not work. The -fno-inline flag is kind # of overkill but it works. Disable inlining only when one of the # files in compat/*.c is being linked in. AS_IF([test x"${USE_COMPAT}" != x],[CFLAGS="$CFLAGS -fno-inline"]) ;; Lynx*) SHLIB_CFLAGS="-fPIC" SHLIB_SUFFIX=".so" CFLAGS_OPTIMIZE=-02 SHLIB_LD='${CC} -shared' LD_FLAGS="-Wl,--export-dynamic" AS_IF([test $doRpath = yes], [ CC_SEARCH_FLAGS='"-Wl,-rpath,${LIB_RUNTIME_DIR}"' LD_SEARCH_FLAGS='"-Wl,-rpath,${LIB_RUNTIME_DIR}"']) ;; OpenBSD-*) arch=`arch -s` case "$arch" in alpha|sparc64) SHLIB_CFLAGS="-fPIC" ;; *) SHLIB_CFLAGS="-fpic" ;; esac SHLIB_LD='${CC} ${SHLIB_CFLAGS} -shared' SHLIB_SUFFIX=".so" AS_IF([test $doRpath = yes], [ CC_SEARCH_FLAGS='"-Wl,-rpath,${LIB_RUNTIME_DIR}"']) LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so${SHLIB_VERSION}' LDFLAGS="$LDFLAGS -Wl,-export-dynamic" CFLAGS_OPTIMIZE="-O2" # On OpenBSD: Compile with -pthread # Don't link with -lpthread LIBS=`echo $LIBS | sed s/-lpthread//` CFLAGS="$CFLAGS -pthread" # OpenBSD doesn't do version numbers with dots. UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' TCL_LIB_VERSIONS_OK=nodots ;; NetBSD-*) # NetBSD has ELF and can use 'cc -shared' to build shared libs SHLIB_CFLAGS="-fPIC" SHLIB_LD='${CC} ${SHLIB_CFLAGS} -shared' SHLIB_SUFFIX=".so" LDFLAGS="$LDFLAGS -export-dynamic" AS_IF([test $doRpath = yes], [ CC_SEARCH_FLAGS='"-Wl,-rpath,${LIB_RUNTIME_DIR}"']) LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} # The -pthread needs to go in the CFLAGS, not LIBS LIBS=`echo $LIBS | sed s/-pthread//` CFLAGS="$CFLAGS -pthread" LDFLAGS="$LDFLAGS -pthread" ;; Darwin-*) CFLAGS_OPTIMIZE="-Os" SHLIB_CFLAGS="-fno-common" # To avoid discrepancies between what headers configure sees during # preprocessing tests and compiling tests, move any -isysroot and # -mmacosx-version-min flags from CFLAGS to CPPFLAGS: CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \ awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ if ([$]i~/^(isysroot|mmacosx-version-min)/) print "-"[$]i}'`" CFLAGS="`echo " ${CFLAGS}" | \ awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ if (!([$]i~/^(isysroot|mmacosx-version-min)/)) print "-"[$]i}'`" AS_IF([test $do64bit = yes], [ case `arch` in ppc) AC_CACHE_CHECK([if compiler accepts -arch ppc64 flag], tcl_cv_cc_arch_ppc64, [ hold_cflags=$CFLAGS CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[]])], [tcl_cv_cc_arch_ppc64=yes],[tcl_cv_cc_arch_ppc64=no]) CFLAGS=$hold_cflags]) AS_IF([test $tcl_cv_cc_arch_ppc64 = yes], [ CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" do64bit_ok=yes ]);; i386) AC_CACHE_CHECK([if compiler accepts -arch x86_64 flag], tcl_cv_cc_arch_x86_64, [ hold_cflags=$CFLAGS CFLAGS="$CFLAGS -arch x86_64" AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[]])], [tcl_cv_cc_arch_x86_64=yes],[tcl_cv_cc_arch_x86_64=no]) CFLAGS=$hold_cflags]) AS_IF([test $tcl_cv_cc_arch_x86_64 = yes], [ CFLAGS="$CFLAGS -arch x86_64" do64bit_ok=yes ]);; *) AC_MSG_WARN([Don't know how enable 64-bit on architecture `arch`]);; esac ], [ # Check for combined 32-bit and 64-bit fat build AS_IF([echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \ && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '], [ fat_32_64=yes]) ]) # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}' AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [ hold_ldflags=$LDFLAGS LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[int i;]])], [tcl_cv_ld_single_module=yes],[tcl_cv_ld_single_module=no]) LDFLAGS=$hold_ldflags]) AS_IF([test $tcl_cv_ld_single_module = yes], [ SHLIB_LD="${SHLIB_LD} -Wl,-single_module" ]) # TEA specific: link shlib with current and compatibility version flags vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([[0-9]]\{1,5\}\)\(\(\.[[0-9]]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d` SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}" SHLIB_SUFFIX=".dylib" LDFLAGS="$LDFLAGS -headerpad_max_install_names" AC_CACHE_CHECK([if ld accepts -search_paths_first flag], tcl_cv_ld_search_paths_first, [ hold_ldflags=$LDFLAGS LDFLAGS="$LDFLAGS -Wl,-search_paths_first" AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[int i;]])], [tcl_cv_ld_search_paths_first=yes],[tcl_cv_ld_search_paths_first=no]) LDFLAGS=$hold_ldflags]) AS_IF([test $tcl_cv_ld_search_paths_first = yes], [ LDFLAGS="$LDFLAGS -Wl,-search_paths_first" ]) AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [ AC_DEFINE(MODULE_SCOPE, [__private_extern__], [Compiler support for module scope symbols]) tcl_cv_cc_visibility_hidden=yes ]) CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" # TEA specific: for combined 32 & 64 bit fat builds of Tk # extensions, verify that 64-bit build is possible. AS_IF([test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"], [ AS_IF([test "${TEA_WINDOWINGSYSTEM}" = x11], [ AC_CACHE_CHECK([for 64-bit X11], tcl_cv_lib_x11_64, [ for v in CFLAGS CPPFLAGS LDFLAGS; do eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' done CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include" LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11" AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include ]], [[XrmInitialize();]])], [tcl_cv_lib_x11_64=yes],[tcl_cv_lib_x11_64=no]) for v in CFLAGS CPPFLAGS LDFLAGS; do eval $v'="$hold_'$v'"' done]) ]) AS_IF([test "${TEA_WINDOWINGSYSTEM}" = aqua], [ AC_CACHE_CHECK([for 64-bit Tk], tcl_cv_lib_tk_64, [ for v in CFLAGS CPPFLAGS LDFLAGS; do eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' done CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}" LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}" AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include ]], [[Tk_InitStubs(NULL, "", 0);]])], [tcl_cv_lib_tk_64=yes],[tcl_cv_lib_tk_64=no]) for v in CFLAGS CPPFLAGS LDFLAGS; do eval $v'="$hold_'$v'"' done]) ]) # remove 64-bit arch flags from CFLAGS et al. if configuration # does not support 64-bit. AS_IF([test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no], [ AC_MSG_NOTICE([Removing 64-bit architectures from compiler & linker flags]) for v in CFLAGS CPPFLAGS LDFLAGS; do eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"' done]) ]) ;; OS/390-*) CFLAGS_OPTIMIZE="" # Optimizer is buggy AC_DEFINE(_OE_SOCKETS, 1, # needed in sys/socket.h [Should OS/390 do the right thing with sockets?]) ;; OSF1-V*) # Digital OSF/1 SHLIB_CFLAGS="" AS_IF([test "$SHARED_BUILD" = 1], [ SHLIB_LD='ld -shared -expect_unresolved "*"' ], [ SHLIB_LD='ld -non_shared -expect_unresolved "*"' ]) SHLIB_SUFFIX=".so" AS_IF([test $doRpath = yes], [ CC_SEARCH_FLAGS='"-Wl,-rpath,${LIB_RUNTIME_DIR}"' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) AS_IF([test "$GCC" = yes], [CFLAGS="$CFLAGS -mieee"], [ CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee"]) # see pthread_intro(3) for pthread support on osf1, k.furukawa CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" LIBS=`echo $LIBS | sed s/-lpthreads//` AS_IF([test "$GCC" = yes], [ LIBS="$LIBS -lpthread -lmach -lexc" ], [ CFLAGS="$CFLAGS -pthread" LDFLAGS="$LDFLAGS -pthread" ]) ;; QNX-6*) # QNX RTP # This may work for all QNX, but it was only reported for v6. SHLIB_CFLAGS="-fPIC" SHLIB_LD="ld -Bshareable -x" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; SCO_SV-3.2*) AS_IF([test "$GCC" = yes], [ SHLIB_CFLAGS="-fPIC -melf" LDFLAGS="$LDFLAGS -melf -Wl,-Bexport" ], [ SHLIB_CFLAGS="-Kpic -belf" LDFLAGS="$LDFLAGS -belf -Wl,-Bexport" ]) SHLIB_LD="ld -G" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; SunOS-5.[[0-6]]) # Careful to not let 5.10+ fall into this case # Note: If _REENTRANT isn't defined, then Solaris # won't define thread-safe library routines. AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, [Do we really want to follow the standard? Yes we do!]) SHLIB_CFLAGS="-KPIC" SHLIB_SUFFIX=".so" AS_IF([test "$GCC" = yes], [ SHLIB_LD='${CC} -shared' CC_SEARCH_FLAGS='"-Wl,-R,${LIB_RUNTIME_DIR}"' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} ], [ SHLIB_LD="/usr/ccs/bin/ld -G -z text" CC_SEARCH_FLAGS='-R "${LIB_RUNTIME_DIR}"' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} ]) ;; SunOS-5*) # Note: If _REENTRANT isn't defined, then Solaris # won't define thread-safe library routines. AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, [Do we really want to follow the standard? Yes we do!]) SHLIB_CFLAGS="-KPIC" # Check to enable 64-bit flags for compiler/linker AS_IF([test "$do64bit" = yes], [ arch=`isainfo` AS_IF([test "$arch" = "sparcv9 sparc"], [ AS_IF([test "$GCC" = yes], [ AS_IF([test "`${CC} -dumpversion | awk -F. '{print [$]1}'`" -lt 3], [ AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system]) ], [ do64bit_ok=yes CFLAGS="$CFLAGS -m64 -mcpu=v9" LDFLAGS="$LDFLAGS -m64 -mcpu=v9" SHLIB_CFLAGS="-fPIC" ]) ], [ do64bit_ok=yes AS_IF([test "$do64bitVIS" = yes], [ CFLAGS="$CFLAGS -xarch=v9a" LDFLAGS_ARCH="-xarch=v9a" ], [ CFLAGS="$CFLAGS -xarch=v9" LDFLAGS_ARCH="-xarch=v9" ]) # Solaris 64 uses this as well #LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64" ]) ], [AS_IF([test "$arch" = "amd64 i386"], [ AS_IF([test "$GCC" = yes], [ case $system in SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) do64bit_ok=yes CFLAGS="$CFLAGS -m64" LDFLAGS="$LDFLAGS -m64";; *) AC_MSG_WARN([64bit mode not supported with GCC on $system]);; esac ], [ do64bit_ok=yes case $system in SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) CFLAGS="$CFLAGS -m64" LDFLAGS="$LDFLAGS -m64";; *) CFLAGS="$CFLAGS -xarch=amd64" LDFLAGS="$LDFLAGS -xarch=amd64";; esac ]) ], [AC_MSG_WARN([64bit mode not supported for $arch])])]) ]) SHLIB_SUFFIX=".so" AS_IF([test "$GCC" = yes], [ SHLIB_LD='${CC} -shared' CC_SEARCH_FLAGS='"-Wl,-R,${LIB_RUNTIME_DIR}"' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} AS_IF([test "$do64bit_ok" = yes], [ AS_IF([test "$arch" = "sparcv9 sparc"], [ # We need to specify -static-libgcc or we need to # add the path to the sparv9 libgcc. # JH: static-libgcc is necessary for core Tcl, but may # not be necessary for extensions. SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" # for finding sparcv9 libgcc, get the regular libgcc # path, remove so name and append 'sparcv9' #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir" ], [AS_IF([test "$arch" = "amd64 i386"], [ # JH: static-libgcc is necessary for core Tcl, but may # not be necessary for extensions. SHLIB_LD="$SHLIB_LD -m64 -static-libgcc" ])]) ]) ], [ case $system in SunOS-5.[[1-9]][[0-9]]*) # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';; *) SHLIB_LD='/usr/ccs/bin/ld -G -z text';; esac CC_SEARCH_FLAGS='"-Wl,-R,${LIB_RUNTIME_DIR}"' LD_SEARCH_FLAGS='-R "${LIB_RUNTIME_DIR}"' ]) ;; UNIX_SV* | UnixWare-5*) SHLIB_CFLAGS="-KPIC" SHLIB_LD='${CC} -G' SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers # that don't grok the -Bexport option. Test that it does. AC_CACHE_CHECK([for ld accepts -Bexport flag], tcl_cv_ld_Bexport, [ hold_ldflags=$LDFLAGS LDFLAGS="$LDFLAGS -Wl,-Bexport" AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[int i;]])], [tcl_cv_ld_Bexport=yes],[tcl_cv_ld_Bexport=no]) LDFLAGS=$hold_ldflags]) AS_IF([test $tcl_cv_ld_Bexport = yes], [ LDFLAGS="$LDFLAGS -Wl,-Bexport" ]) CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; esac AS_IF([test "$do64bit" = yes -a "$do64bit_ok" = no], [ AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform]) ]) dnl # Add any CPPFLAGS set in the environment to our CFLAGS, but delay doing so dnl # until the end of configure, as configure's compile and link tests use dnl # both CPPFLAGS and CFLAGS (unlike our compile and link) but configure's dnl # preprocessing tests use only CPPFLAGS. AC_CONFIG_COMMANDS_PRE([CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS=""]) # Add in the arch flags late to ensure it wasn't removed. # Not necessary in TEA, but this is aligned with core LDFLAGS="$LDFLAGS $LDFLAGS_ARCH" # If we're running gcc, then change the C flags for compiling shared # libraries to the right flags for gcc, instead of those for the # standard manufacturer compiler. AS_IF([test "$GCC" = yes], [ case $system in AIX-*) ;; BSD/OS*) ;; CYGWIN_*|MINGW32_*|MINGW64_*|MSYS_*) ;; IRIX*) ;; NetBSD-*|DragonFly-*|FreeBSD-*|OpenBSD-*) ;; Darwin-*) ;; SCO_SV-3.2*) ;; windows) ;; *) SHLIB_CFLAGS="-fPIC" ;; esac]) AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [ AC_DEFINE(MODULE_SCOPE, [extern], [No Compiler support for module scope symbols]) ]) AS_IF([test "$SHARED_LIB_SUFFIX" = ""], [ # TEA specific: use PACKAGE_VERSION instead of VERSION SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}']) AS_IF([test "$UNSHARED_LIB_SUFFIX" = ""], [ # TEA specific: use PACKAGE_VERSION instead of VERSION UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a']) if test "${GCC}" = "yes" -a ${SHLIB_SUFFIX} = ".dll"; then AC_CACHE_CHECK(for SEH support in compiler, tcl_cv_seh, AC_RUN_IFELSE([AC_LANG_SOURCE([[ #define WIN32_LEAN_AND_MEAN #include #undef WIN32_LEAN_AND_MEAN int main(int argc, char** argv) { int a, b = 0; __try { a = 666 / b; } __except (EXCEPTION_EXECUTE_HANDLER) { return 0; } return 1; } ]])], [tcl_cv_seh=yes], [tcl_cv_seh=no], [tcl_cv_seh=no]) ) if test "$tcl_cv_seh" = "no" ; then AC_DEFINE(HAVE_NO_SEH, 1, [Defined when mingw does not support SEH]) fi # # Check to see if the excpt.h include file provided contains the # definition for EXCEPTION_DISPOSITION; if not, which is the case # with Cygwin's version as of 2002-04-10, define it to be int, # sufficient for getting the current code to work. # AC_CACHE_CHECK(for EXCEPTION_DISPOSITION support in include files, tcl_cv_eh_disposition, AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ # define WIN32_LEAN_AND_MEAN # include # undef WIN32_LEAN_AND_MEAN ]], [[ EXCEPTION_DISPOSITION x; ]])], [tcl_cv_eh_disposition=yes], [tcl_cv_eh_disposition=no]) ) if test "$tcl_cv_eh_disposition" = "no" ; then AC_DEFINE(EXCEPTION_DISPOSITION, int, [Defined when cygwin/mingw does not support EXCEPTION DISPOSITION]) fi # Check to see if winnt.h defines CHAR, SHORT, and LONG # even if VOID has already been #defined. The win32api # used by mingw and cygwin is known to do this. AC_CACHE_CHECK(for winnt.h that ignores VOID define, tcl_cv_winnt_ignore_void, AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ #define VOID void #define WIN32_LEAN_AND_MEAN #include #undef WIN32_LEAN_AND_MEAN ]], [[ CHAR c; SHORT s; LONG l; ]])], [tcl_cv_winnt_ignore_void=yes], [tcl_cv_winnt_ignore_void=no]) ) if test "$tcl_cv_winnt_ignore_void" = "yes" ; then AC_DEFINE(HAVE_WINNT_IGNORE_VOID, 1, [Defined when cygwin/mingw ignores VOID define in winnt.h]) fi fi # See if the compiler supports casting to a union type. # This is used to stop gcc from printing a compiler # warning when initializing a union member. AC_CACHE_CHECK(for cast to union support, tcl_cv_cast_to_union, AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[ union foo { int i; double d; }; union foo f = (union foo) (int) 0; ]])], [tcl_cv_cast_to_union=yes], [tcl_cv_cast_to_union=no]) ) if test "$tcl_cv_cast_to_union" = "yes"; then AC_DEFINE(HAVE_CAST_TO_UNION, 1, [Defined when compiler supports casting to union type.]) fi AC_CHECK_HEADER(stdbool.h, [AC_DEFINE(HAVE_STDBOOL_H, 1, [Do we have ?])],) AC_SUBST(CFLAGS_DEBUG) AC_SUBST(CFLAGS_OPTIMIZE) AC_SUBST(CFLAGS_WARNING) AC_SUBST(LDFLAGS_DEBUG) AC_SUBST(LDFLAGS_OPTIMIZE) AC_SUBST(STLIB_LD) AC_SUBST(SHLIB_LD) AC_SUBST(SHLIB_LD_LIBS) AC_SUBST(SHLIB_CFLAGS) AC_SUBST(LD_LIBRARY_PATH_VAR) # These must be called after we do the basic CFLAGS checks and # verify any possible 64-bit or similar switches are necessary TEA_TCL_EARLY_FLAGS TEA_TCL_64BIT_FLAGS ]) #-------------------------------------------------------------------- # TEA_SERIAL_PORT # # Determine which interface to use to talk to the serial port. # Note that #include lines must begin in leftmost column for # some compilers to recognize them as preprocessor directives, # and some build environments have stdin not pointing at a # pseudo-terminal (usually /dev/null instead.) # # Arguments: # none # # Results: # # Defines only one of the following vars: # HAVE_SYS_MODEM_H # USE_TERMIOS # USE_TERMIO # USE_SGTTY #-------------------------------------------------------------------- AC_DEFUN([TEA_SERIAL_PORT], [ AC_CHECK_HEADERS(sys/modem.h) AC_CACHE_CHECK([termios vs. termio vs. sgtty], tcl_cv_api_serial, [ AC_RUN_IFELSE([AC_LANG_SOURCE([[ #include int main() { struct termios t; if (tcgetattr(0, &t) == 0) { cfsetospeed(&t, 0); t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; return 0; } return 1; }]])],[tcl_cv_api_serial=termios],[tcl_cv_api_serial=no],[tcl_cv_api_serial=no]) if test $tcl_cv_api_serial = no ; then AC_RUN_IFELSE([AC_LANG_SOURCE([[ #include int main() { struct termio t; if (ioctl(0, TCGETA, &t) == 0) { t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; return 0; } return 1; }]])],[tcl_cv_api_serial=termio],[tcl_cv_api_serial=no],[tcl_cv_api_serial=no]) fi if test $tcl_cv_api_serial = no ; then AC_RUN_IFELSE([AC_LANG_SOURCE([[ #include int main() { struct sgttyb t; if (ioctl(0, TIOCGETP, &t) == 0) { t.sg_ospeed = 0; t.sg_flags |= ODDP | EVENP | RAW; return 0; } return 1; }]])],[tcl_cv_api_serial=sgtty],[tcl_cv_api_serial=no],[tcl_cv_api_serial=no]) fi if test $tcl_cv_api_serial = no ; then AC_RUN_IFELSE([AC_LANG_SOURCE([[ #include #include int main() { struct termios t; if (tcgetattr(0, &t) == 0 || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { cfsetospeed(&t, 0); t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; return 0; } return 1; }]])],[tcl_cv_api_serial=termios],[tcl_cv_api_serial=no],[tcl_cv_api_serial=no]) fi if test $tcl_cv_api_serial = no; then AC_RUN_IFELSE([AC_LANG_SOURCE([[ #include #include int main() { struct termio t; if (ioctl(0, TCGETA, &t) == 0 || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; return 0; } return 1; }]])],[tcl_cv_api_serial=termio],[tcl_cv_api_serial=no],[tcl_cv_api_serial=no]) fi if test $tcl_cv_api_serial = no; then AC_RUN_IFELSE([AC_LANG_SOURCE([[ #include #include int main() { struct sgttyb t; if (ioctl(0, TIOCGETP, &t) == 0 || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { t.sg_ospeed = 0; t.sg_flags |= ODDP | EVENP | RAW; return 0; } return 1; }]])],[tcl_cv_api_serial=sgtty],[tcl_cv_api_serial=none],[tcl_cv_api_serial=none]) fi]) case $tcl_cv_api_serial in termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);; termio) AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);; sgtty) AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);; esac ]) #-------------------------------------------------------------------- # TEA_PATH_X # # Locate the X11 header files and the X11 library archive. Try # the ac_path_x macro first, but if it doesn't find the X stuff # (e.g. because there's no xmkmf program) then check through # a list of possible directories. Under some conditions the # autoconf macro will return an include directory that contains # no include files, so double-check its result just to be safe. # # This should be called after TEA_CONFIG_CFLAGS as setting the # LIBS line can confuse some configure macro magic. # # Arguments: # none # # Results: # # Sets the following vars: # XINCLUDES # XLIBSW # PKG_LIBS (appends to) #-------------------------------------------------------------------- AC_DEFUN([TEA_PATH_X], [ if test "${TEA_WINDOWINGSYSTEM}" = "x11" ; then TEA_PATH_UNIX_X fi ]) AC_DEFUN([TEA_PATH_UNIX_X], [ AC_PATH_X not_really_there="" if test "$no_x" = ""; then if test "$x_includes" = ""; then AC_PREPROC_IFELSE([AC_LANG_SOURCE([[#include ]])],[],[not_really_there="yes"]) else if test ! -r $x_includes/X11/Xlib.h; then not_really_there="yes" fi fi fi if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then AC_MSG_CHECKING([for X11 header files]) found_xincludes="no" AC_PREPROC_IFELSE([AC_LANG_SOURCE([[#include ]])],[found_xincludes="yes"],[found_xincludes="no"]) if test "$found_xincludes" = "no"; then dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" for i in $dirs ; do if test -r $i/X11/Xlib.h; then AC_MSG_RESULT([$i]) XINCLUDES=" -I$i" found_xincludes="yes" break fi done fi else if test "$x_includes" != ""; then XINCLUDES="-I$x_includes" found_xincludes="yes" fi fi if test "$found_xincludes" = "no"; then AC_MSG_RESULT([couldn't find any!]) fi if test "$no_x" = yes; then AC_MSG_CHECKING([for X11 libraries]) XLIBSW=nope dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" for i in $dirs ; do if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl -o -r $i/libX11.dylib; then AC_MSG_RESULT([$i]) XLIBSW="-L$i -lX11" x_libraries="$i" break fi done else if test "$x_libraries" = ""; then XLIBSW=-lX11 else XLIBSW="-L$x_libraries -lX11" fi fi if test "$XLIBSW" = nope ; then AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) fi if test "$XLIBSW" = nope ; then AC_MSG_RESULT([could not find any! Using -lX11.]) XLIBSW=-lX11 fi # TEA specific: if test x"${XLIBSW}" != x ; then PKG_LIBS="${PKG_LIBS} ${XLIBSW}" fi ]) #-------------------------------------------------------------------- # TEA_BLOCKING_STYLE # # The statements below check for systems where POSIX-style # non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. # On these systems (mostly older ones), use the old BSD-style # FIONBIO approach instead. # # Arguments: # none # # Results: # # Defines some of the following vars: # HAVE_SYS_IOCTL_H # HAVE_SYS_FILIO_H # USE_FIONBIO # O_NONBLOCK #-------------------------------------------------------------------- AC_DEFUN([TEA_BLOCKING_STYLE], [ AC_CHECK_HEADERS(sys/ioctl.h) AC_CHECK_HEADERS(sys/filio.h) TEA_CONFIG_SYSTEM AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) case $system in OSF*) AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) AC_MSG_RESULT([FIONBIO]) ;; *) AC_MSG_RESULT([O_NONBLOCK]) ;; esac ]) #-------------------------------------------------------------------- # TEA_TIME_HANDLER # # Checks how the system deals with time.h, what time structures # are used on the system, and what fields the structures have. # # Arguments: # none # # Results: # # Defines some of the following vars: # USE_DELTA_FOR_TZ # HAVE_TM_GMTOFF # HAVE_TM_TZADJ # HAVE_TIMEZONE_VAR # #-------------------------------------------------------------------- AC_DEFUN([TEA_TIME_HANDLER], [ AC_CHECK_HEADERS(sys/time.h) AC_HEADER_TIME AC_STRUCT_TIMEZONE AC_CHECK_FUNCS(gmtime_r localtime_r mktime) AC_CACHE_CHECK([tm_tzadj in struct tm], tcl_cv_member_tm_tzadj, [ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[struct tm tm; (void)tm.tm_tzadj;]])], [tcl_cv_member_tm_tzadj=yes], [tcl_cv_member_tm_tzadj=no])]) if test $tcl_cv_member_tm_tzadj = yes ; then AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?]) fi AC_CACHE_CHECK([tm_gmtoff in struct tm], tcl_cv_member_tm_gmtoff, [ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[struct tm tm; (void)tm.tm_gmtoff;]])], [tcl_cv_member_tm_gmtoff=yes], [tcl_cv_member_tm_gmtoff=no])]) if test $tcl_cv_member_tm_gmtoff = yes ; then AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?]) fi # # Its important to include time.h in this check, as some systems # (like convex) have timezone functions, etc. # AC_CACHE_CHECK([long timezone variable], tcl_cv_timezone_long, [ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[extern long timezone; timezone += 1; exit (0);]])], [tcl_cv_timezone_long=yes], [tcl_cv_timezone_long=no])]) if test $tcl_cv_timezone_long = yes ; then AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) else # # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. # AC_CACHE_CHECK([time_t timezone variable], tcl_cv_timezone_time, [ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[extern time_t timezone; timezone += 1; exit (0);]])], [tcl_cv_timezone_time=yes], [tcl_cv_timezone_time=no])]) if test $tcl_cv_timezone_time = yes ; then AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) fi fi ]) #-------------------------------------------------------------------- # TEA_BUGGY_STRTOD # # Under Solaris 2.4, strtod returns the wrong value for the # terminating character under some conditions. Check for this # and if the problem exists use a substitute procedure # "fixstrtod" (provided by Tcl) that corrects the error. # Also, on Compaq's Tru64 Unix 5.0, # strtod(" ") returns 0.0 instead of a failure to convert. # # Arguments: # none # # Results: # # Might defines some of the following vars: # strtod (=fixstrtod) #-------------------------------------------------------------------- AC_DEFUN([TEA_BUGGY_STRTOD], [ AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) if test "$tcl_strtod" = 1; then AC_CACHE_CHECK([for Solaris2.4/Tru64 strtod bugs], tcl_cv_strtod_buggy,[ AC_RUN_IFELSE([AC_LANG_SOURCE([[ #include extern double strtod(); int main() { char *infString="Inf", *nanString="NaN", *spaceString=" "; char *term; double value; value = strtod(infString, &term); if ((term != infString) && (term[-1] == 0)) { exit(1); } value = strtod(nanString, &term); if ((term != nanString) && (term[-1] == 0)) { exit(1); } value = strtod(spaceString, &term); if (term == (spaceString+1)) { exit(1); } exit(0); }]])], [tcl_cv_strtod_buggy=ok], [tcl_cv_strtod_buggy=buggy], [tcl_cv_strtod_buggy=buggy])]) if test "$tcl_cv_strtod_buggy" = buggy; then AC_LIBOBJ([fixstrtod]) USE_COMPAT=1 AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?]) fi fi ]) #-------------------------------------------------------------------- # TEA_TCL_LINK_LIBS # # Search for the libraries needed to link the Tcl shell. # Things like the math library (-lm), socket stuff (-lsocket vs. # -lnsl), zlib (-lz) and libtommath (-ltommath) are dealt with here. # # Arguments: # None. # # Results: # # Might append to the following vars: # LIBS # MATH_LIBS # # Might define the following vars: # HAVE_NET_ERRNO_H # #-------------------------------------------------------------------- AC_DEFUN([TEA_TCL_LINK_LIBS], [ #-------------------------------------------------------------------- # On a few very rare systems, all of the libm.a stuff is # already in libc.a. Set compiler flags accordingly. #-------------------------------------------------------------------- AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") #-------------------------------------------------------------------- # Interactive UNIX requires -linet instead of -lsocket, plus it # needs net/errno.h to define the socket-related error codes. #-------------------------------------------------------------------- AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) AC_CHECK_HEADER(net/errno.h, [ AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have ?])]) #-------------------------------------------------------------------- # Check for the existence of the -lsocket and -lnsl libraries. # The order here is important, so that they end up in the right # order in the command line generated by make. Here are some # special considerations: # 1. Use "connect" and "accept" to check for -lsocket, and # "gethostbyname" to check for -lnsl. # 2. Use each function name only once: can't redo a check because # autoconf caches the results of the last check and won't redo it. # 3. Use -lnsl and -lsocket only if they supply procedures that # aren't already present in the normal libraries. This is because # IRIX 5.2 has libraries, but they aren't needed and they're # bogus: they goof up name resolution if used. # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. # To get around this problem, check for both libraries together # if -lsocket doesn't work by itself. #-------------------------------------------------------------------- tcl_checkBoth=0 AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1) if test "$tcl_checkSocket" = 1; then AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt, LIBS="$LIBS -lsocket", tcl_checkBoth=1)]) fi if test "$tcl_checkBoth" = 1; then tk_oldLibs=$LIBS LIBS="$LIBS -lsocket -lnsl" AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs]) fi AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname, [LIBS="$LIBS -lnsl"])]) AC_CHECK_FUNC(mp_log_u32, , [AC_CHECK_LIB(tommath, mp_log_u32, [LIBS="$LIBS -ltommath"])]) AC_CHECK_FUNC(deflateSetHeader, , [AC_CHECK_LIB(z, deflateSetHeader, [LIBS="$LIBS -lz"])]) ]) #-------------------------------------------------------------------- # TEA_TCL_EARLY_FLAGS # # Check for what flags are needed to be passed so the correct OS # features are available. # # Arguments: # None # # Results: # # Might define the following vars: # _ISOC99_SOURCE # _LARGEFILE64_SOURCE # _LARGEFILE_SOURCE64 # #-------------------------------------------------------------------- AC_DEFUN([TEA_TCL_EARLY_FLAG],[ AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]), AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[$2]], [[$3]])], [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no,[AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[[#define ]$1[ 1 ]$2]], [[$3]])], [tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no)])) if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then AC_DEFINE($1, 1, [Add the ]$1[ flag when building]) tcl_flags="$tcl_flags $1" fi ]) AC_DEFUN([TEA_TCL_EARLY_FLAGS],[ AC_MSG_CHECKING([for required early compiler flags]) tcl_flags="" TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include ], [char *p = (char *)strtoll; char *q = (char *)strtoull;]) TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include ], [struct stat64 buf; int i = stat64("/", &buf);]) TEA_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include ], [char *p = (char *)open64;]) if test "x${tcl_flags}" = "x" ; then AC_MSG_RESULT([none]) else AC_MSG_RESULT([${tcl_flags}]) fi ]) #-------------------------------------------------------------------- # TEA_TCL_64BIT_FLAGS # # Check for what is defined in the way of 64-bit features. # # Arguments: # None # # Results: # # Might define the following vars: # TCL_WIDE_INT_IS_LONG # TCL_WIDE_INT_TYPE # HAVE_STRUCT_DIRENT64, HAVE_DIR64 # HAVE_STRUCT_STAT64 # HAVE_TYPE_OFF64_T # #-------------------------------------------------------------------- AC_DEFUN([TEA_TCL_64BIT_FLAGS], [ AC_MSG_CHECKING([for 64-bit integer type]) AC_CACHE_VAL(tcl_cv_type_64bit,[ tcl_cv_type_64bit=none # See if the compiler knows natively about __int64 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[__int64 value = (__int64) 0;]])], [tcl_type_64bit=__int64],[tcl_type_64bit="long long"]) # See if we could use long anyway Note that we substitute in the # type that is our current guess for a 64-bit type inside this check # program, so it should be modified only carefully... AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[switch (0) { case 1: case (sizeof(${tcl_type_64bit})==sizeof(long)): ; }]])],[tcl_cv_type_64bit=${tcl_type_64bit}],[])]) if test "${tcl_cv_type_64bit}" = none ; then AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Do 'long' and 'long long' have the same size (64-bit)?]) AC_MSG_RESULT([yes]) elif test "${tcl_cv_type_64bit}" = "__int64" \ -a "${TEA_PLATFORM}" = "windows" ; then # TEA specific: We actually want to use the default tcl.h checks in # this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* AC_MSG_RESULT([using Tcl header defaults]) else AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit}, [What type should be used to define wide integers?]) AC_MSG_RESULT([${tcl_cv_type_64bit}]) # Now check for auxiliary declarations AC_CACHE_CHECK([for struct dirent64], tcl_cv_struct_dirent64,[ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include #include ]], [[struct dirent64 p;]])], [tcl_cv_struct_dirent64=yes],[tcl_cv_struct_dirent64=no])]) if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in ?]) fi AC_CACHE_CHECK([for DIR64], tcl_cv_DIR64,[ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include #include ]], [[struct dirent64 *p; DIR64 d = opendir64("."); p = readdir64(d); rewinddir64(d); closedir64(d);]])], [tcl_cv_DIR64=yes], [tcl_cv_DIR64=no])]) if test "x${tcl_cv_DIR64}" = "xyes" ; then AC_DEFINE(HAVE_DIR64, 1, [Is 'DIR64' in ?]) fi AC_CACHE_CHECK([for struct stat64], tcl_cv_struct_stat64,[ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[struct stat64 p; ]])], [tcl_cv_struct_stat64=yes], [tcl_cv_struct_stat64=no])]) if test "x${tcl_cv_struct_stat64}" = "xyes" ; then AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in ?]) fi AC_CHECK_FUNCS(open64 lseek64) AC_MSG_CHECKING([for off64_t]) AC_CACHE_VAL(tcl_cv_type_off64_t,[ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[off64_t offset; ]])], [tcl_cv_type_off64_t=yes], [tcl_cv_type_off64_t=no])]) dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the dnl functions lseek64 and open64 are defined. if test "x${tcl_cv_type_off64_t}" = "xyes" && \ test "x${ac_cv_func_lseek64}" = "xyes" && \ test "x${ac_cv_func_open64}" = "xyes" ; then AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in ?]) AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi fi ]) ## ## Here ends the standard Tcl configuration bits and starts the ## TEA specific functions ## #------------------------------------------------------------------------ # TEA_INIT -- # # Init various Tcl Extension Architecture (TEA) variables. # This should be the first called TEA_* macro. # # Arguments: # none # # Results: # # Defines and substs the following vars: # CYGPATH # EXEEXT # Defines only: # TEA_VERSION # TEA_INITED # TEA_PLATFORM (windows or unix) # # "cygpath" is used on windows to generate native path names for include # files. These variables should only be used with the compiler and linker # since they generate native path names. # # EXEEXT # Select the executable extension based on the host type. This # is a lightweight replacement for AC_EXEEXT that doesn't require # a compiler. #------------------------------------------------------------------------ AC_DEFUN([TEA_INIT], [ TEA_VERSION="3.13" AC_MSG_CHECKING([TEA configuration]) if test x"${PACKAGE_NAME}" = x ; then AC_MSG_ERROR([ The PACKAGE_NAME variable must be defined by your TEA configure.ac]) fi AC_MSG_RESULT([ok (TEA ${TEA_VERSION})]) # If the user did not set CFLAGS, set it now to keep macros # like AC_PROG_CC and AC_TRY_COMPILE from adding "-g -O2". if test "${CFLAGS+set}" != "set" ; then CFLAGS="" fi case "`uname -s`" in *win32*|*WIN32*|*MINGW32_*|*MINGW64_*|*MSYS_*) AC_CHECK_PROG(CYGPATH, cygpath, cygpath -m, echo) EXEEXT=".exe" TEA_PLATFORM="windows" ;; *CYGWIN_*) EXEEXT=".exe" # CYGPATH and TEA_PLATFORM are determined later in LOAD_TCLCONFIG ;; *) CYGPATH=echo # Maybe we are cross-compiling.... case ${host_alias} in *mingw32*) EXEEXT=".exe" TEA_PLATFORM="windows" ;; *) EXEEXT="" TEA_PLATFORM="unix" ;; esac ;; esac # Check if exec_prefix is set. If not use fall back to prefix. # Note when adjusted, so that TEA_PREFIX can correct for this. # This is needed for recursive configures, since autoconf propagates # $prefix, but not $exec_prefix (doh!). if test x$exec_prefix = xNONE ; then exec_prefix_default=yes exec_prefix=$prefix fi AC_MSG_NOTICE([configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}]) AC_SUBST(EXEEXT) AC_SUBST(CYGPATH) # This package name must be replaced statically for AC_SUBST to work AC_SUBST(PKG_LIB_FILE) AC_SUBST(PKG_LIB_FILE8) AC_SUBST(PKG_LIB_FILE9) # Substitute STUB_LIB_FILE in case package creates a stub library too. AC_SUBST(PKG_STUB_LIB_FILE) # We AC_SUBST these here to ensure they are subst'ed, # in case the user doesn't call TEA_ADD_... AC_SUBST(PKG_STUB_SOURCES) AC_SUBST(PKG_STUB_OBJECTS) AC_SUBST(PKG_TCL_SOURCES) AC_SUBST(PKG_HEADERS) AC_SUBST(PKG_INCLUDES) AC_SUBST(PKG_LIBS) AC_SUBST(PKG_CFLAGS) # Configure the installer. TEA_INSTALLER ]) #------------------------------------------------------------------------ # TEA_ADD_SOURCES -- # # Specify one or more source files. Users should check for # the right platform before adding to their list. # It is not important to specify the directory, as long as it is # in the generic, win or unix subdirectory of $(srcdir). # # Arguments: # one or more file names # # Results: # # Defines and substs the following vars: # PKG_SOURCES # PKG_OBJECTS #------------------------------------------------------------------------ AC_DEFUN([TEA_ADD_SOURCES], [ vars="$@" for i in $vars; do case $i in [\$]*) # allow $-var names PKG_SOURCES="$PKG_SOURCES $i" PKG_OBJECTS="$PKG_OBJECTS $i" ;; *) # check for existence - allows for generic/win/unix VPATH # To add more dirs here (like 'src'), you have to update VPATH # in Makefile.in as well if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ -a ! -f "${srcdir}/macosx/$i" \ ; then AC_MSG_ERROR([could not find source file '$i']) fi PKG_SOURCES="$PKG_SOURCES $i" # this assumes it is in a VPATH dir i=`basename $i` # handle user calling this before or after TEA_SETUP_COMPILER if test x"${OBJEXT}" != x ; then j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" else j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" fi PKG_OBJECTS="$PKG_OBJECTS $j" ;; esac done AC_SUBST(PKG_SOURCES) AC_SUBST(PKG_OBJECTS) ]) #------------------------------------------------------------------------ # TEA_ADD_STUB_SOURCES -- # # Specify one or more source files. Users should check for # the right platform before adding to their list. # It is not important to specify the directory, as long as it is # in the generic, win or unix subdirectory of $(srcdir). # # Arguments: # one or more file names # # Results: # # Defines and substs the following vars: # PKG_STUB_SOURCES # PKG_STUB_OBJECTS #------------------------------------------------------------------------ AC_DEFUN([TEA_ADD_STUB_SOURCES], [ vars="$@" for i in $vars; do # check for existence - allows for generic/win/unix VPATH if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ -a ! -f "${srcdir}/macosx/$i" \ ; then AC_MSG_ERROR([could not find stub source file '$i']) fi PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" # this assumes it is in a VPATH dir i=`basename $i` # handle user calling this before or after TEA_SETUP_COMPILER if test x"${OBJEXT}" != x ; then j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" else j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" fi PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" done AC_SUBST(PKG_STUB_SOURCES) AC_SUBST(PKG_STUB_OBJECTS) ]) #------------------------------------------------------------------------ # TEA_ADD_TCL_SOURCES -- # # Specify one or more Tcl source files. These should be platform # independent runtime files. # # Arguments: # one or more file names # # Results: # # Defines and substs the following vars: # PKG_TCL_SOURCES #------------------------------------------------------------------------ AC_DEFUN([TEA_ADD_TCL_SOURCES], [ vars="$@" for i in $vars; do # check for existence, be strict because it is installed if test ! -f "${srcdir}/$i" ; then AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i']) fi PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" done AC_SUBST(PKG_TCL_SOURCES) ]) #------------------------------------------------------------------------ # TEA_ADD_HEADERS -- # # Specify one or more source headers. Users should check for # the right platform before adding to their list. # # Arguments: # one or more file names # # Results: # # Defines and substs the following vars: # PKG_HEADERS #------------------------------------------------------------------------ AC_DEFUN([TEA_ADD_HEADERS], [ vars="$@" for i in $vars; do # check for existence, be strict because it is installed if test ! -f "${srcdir}/$i" ; then AC_MSG_ERROR([could not find header file '${srcdir}/$i']) fi PKG_HEADERS="$PKG_HEADERS $i" done AC_SUBST(PKG_HEADERS) ]) #------------------------------------------------------------------------ # TEA_ADD_INCLUDES -- # # Specify one or more include dirs. Users should check for # the right platform before adding to their list. # # Arguments: # one or more file names # # Results: # # Defines and substs the following vars: # PKG_INCLUDES #------------------------------------------------------------------------ AC_DEFUN([TEA_ADD_INCLUDES], [ vars="$@" for i in $vars; do PKG_INCLUDES="$PKG_INCLUDES $i" done AC_SUBST(PKG_INCLUDES) ]) #------------------------------------------------------------------------ # TEA_ADD_LIBS -- # # Specify one or more libraries. Users should check for # the right platform before adding to their list. For Windows, # libraries provided in "foo.lib" format will be converted to # "-lfoo" when using GCC (mingw). # # Arguments: # one or more file names # # Results: # # Defines and substs the following vars: # PKG_LIBS #------------------------------------------------------------------------ AC_DEFUN([TEA_ADD_LIBS], [ vars="$@" for i in $vars; do if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then # Convert foo.lib to -lfoo for GCC. No-op if not *.lib i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.[[lL]][[iI]][[bB]][$]/-l\1/'` fi PKG_LIBS="$PKG_LIBS $i" done AC_SUBST(PKG_LIBS) ]) #------------------------------------------------------------------------ # TEA_ADD_CFLAGS -- # # Specify one or more CFLAGS. Users should check for # the right platform before adding to their list. # # Arguments: # one or more file names # # Results: # # Defines and substs the following vars: # PKG_CFLAGS #------------------------------------------------------------------------ AC_DEFUN([TEA_ADD_CFLAGS], [ PKG_CFLAGS="$PKG_CFLAGS $@" AC_SUBST(PKG_CFLAGS) ]) #------------------------------------------------------------------------ # TEA_ADD_CLEANFILES -- # # Specify one or more CLEANFILES. # # Arguments: # one or more file names to clean target # # Results: # # Appends to CLEANFILES, already defined for subst in LOAD_TCLCONFIG #------------------------------------------------------------------------ AC_DEFUN([TEA_ADD_CLEANFILES], [ CLEANFILES="$CLEANFILES $@" ]) #------------------------------------------------------------------------ # TEA_PREFIX -- # # Handle the --prefix=... option by defaulting to what Tcl gave # # Arguments: # none # # Results: # # If --prefix or --exec-prefix was not specified, $prefix and # $exec_prefix will be set to the values given to Tcl when it was # configured. #------------------------------------------------------------------------ AC_DEFUN([TEA_PREFIX], [ if test "${prefix}" = "NONE"; then prefix_default=yes if test x"${TCL_PREFIX}" != x; then AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}]) prefix=${TCL_PREFIX} else AC_MSG_NOTICE([--prefix defaulting to /usr/local]) prefix=/usr/local fi fi if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \ -o x"${exec_prefix_default}" = x"yes" ; then if test x"${TCL_EXEC_PREFIX}" != x; then AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}]) exec_prefix=${TCL_EXEC_PREFIX} else AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}]) exec_prefix=$prefix fi fi ]) #------------------------------------------------------------------------ # TEA_SETUP_COMPILER_CC -- # # Do compiler checks the way we want. This is just a replacement # for AC_PROG_CC in TEA configure.ac files to make them cleaner. # # Arguments: # none # # Results: # # Sets up CC var and other standard bits we need to make executables. #------------------------------------------------------------------------ AC_DEFUN([TEA_SETUP_COMPILER_CC], [ # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) # in this macro, they need to go into TEA_SETUP_COMPILER instead. AC_PROG_CC AC_PROG_CPP #-------------------------------------------------------------------- # Checks to see if the make program sets the $MAKE variable. #-------------------------------------------------------------------- AC_PROG_MAKE_SET #-------------------------------------------------------------------- # Find ranlib #-------------------------------------------------------------------- AC_CHECK_TOOL(RANLIB, ranlib) #-------------------------------------------------------------------- # Determines the correct binary file extension (.o, .obj, .exe etc.) #-------------------------------------------------------------------- AC_OBJEXT AC_EXEEXT ]) #------------------------------------------------------------------------ # TEA_SETUP_COMPILER -- # # Do compiler checks that use the compiler. This must go after # TEA_SETUP_COMPILER_CC, which does the actual compiler check. # # Arguments: # none # # Results: # # Sets up CC var and other standard bits we need to make executables. #------------------------------------------------------------------------ AC_DEFUN([TEA_SETUP_COMPILER], [ # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. AC_REQUIRE([TEA_SETUP_COMPILER_CC]) #------------------------------------------------------------------------ # If we're using GCC, see if the compiler understands -pipe. If so, use it. # It makes compiling go faster. (This is only a performance feature.) #------------------------------------------------------------------------ if test -z "$no_pipe" -a -n "$GCC"; then AC_CACHE_CHECK([if the compiler understands -pipe], tcl_cv_cc_pipe, [ hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe" AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[]])],[tcl_cv_cc_pipe=yes],[tcl_cv_cc_pipe=no]) CFLAGS=$hold_cflags]) if test $tcl_cv_cc_pipe = yes; then CFLAGS="$CFLAGS -pipe" fi fi #-------------------------------------------------------------------- # Common compiler flag setup #-------------------------------------------------------------------- AC_C_BIGENDIAN ]) #------------------------------------------------------------------------ # TEA_MAKE_LIB -- # # Generate a line that can be used to build a shared/unshared library # in a platform independent manner. # # Arguments: # none # # Requires: # # Results: # # Defines the following vars: # CFLAGS - Done late here to note disturb other AC macros # MAKE_LIB - Command to execute to build the Tcl library; # differs depending on whether or not Tcl is being # compiled as a shared library. # MAKE_SHARED_LIB Makefile rule for building a shared library # MAKE_STATIC_LIB Makefile rule for building a static library # MAKE_STUB_LIB Makefile rule for building a stub library # VC_MANIFEST_EMBED_DLL Makefile rule for embedded VC manifest in DLL # VC_MANIFEST_EMBED_EXE Makefile rule for embedded VC manifest in EXE #------------------------------------------------------------------------ AC_DEFUN([TEA_MAKE_LIB], [ if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)" MAKE_SHARED_LIB="\${SHLIB_LD} \${LDFLAGS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" AC_EGREP_CPP([manifest needed], [ #if defined(_MSC_VER) && _MSC_VER >= 1400 print("manifest needed") #endif ], [ # Could do a CHECK_PROG for mt, but should always be with MSVC8+ VC_MANIFEST_EMBED_DLL="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;2 ; fi" VC_MANIFEST_EMBED_EXE="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;1 ; fi" MAKE_SHARED_LIB="${MAKE_SHARED_LIB} ; ${VC_MANIFEST_EMBED_DLL}" TEA_ADD_CLEANFILES([*.manifest]) ]) MAKE_STUB_LIB="\${STLIB_LD} -nodefaultlib -out:\[$]@ \$(PKG_STUB_OBJECTS)" else MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)" MAKE_SHARED_LIB="\${SHLIB_LD} \${LDFLAGS} \${LDFLAGS_DEFAULT} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)" fi if test "${SHARED_BUILD}" = "1" ; then MAKE_LIB="${MAKE_SHARED_LIB} " else MAKE_LIB="${MAKE_STATIC_LIB} " fi #-------------------------------------------------------------------- # Shared libraries and static libraries have different names. # Use the double eval to make sure any variables in the suffix is # substituted. (@@@ Might not be necessary anymore) #-------------------------------------------------------------------- PACKAGE_LIB_PREFIX8="${PACKAGE_LIB_PREFIX}" PACKAGE_LIB_PREFIX9="${PACKAGE_LIB_PREFIX}tcl9" if test "${TCL_MAJOR_VERSION}" -gt 8 ; then PACKAGE_LIB_PREFIX="${PACKAGE_LIB_PREFIX9}" else PACKAGE_LIB_PREFIX="${PACKAGE_LIB_PREFIX8}" fi if test "${TEA_PLATFORM}" = "windows" ; then if test "${SHARED_BUILD}" = "1" ; then # We force the unresolved linking of symbols that are really in # the private libraries of Tcl and Tk. if test x"${TK_BIN_DIR}" != x ; then SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" fi SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" if test "$GCC" = "yes"; then SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -static-libgcc" fi eval eval "PKG_LIB_FILE8=${PACKAGE_LIB_PREFIX8}${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" eval eval "PKG_LIB_FILE9=${PACKAGE_LIB_PREFIX9}${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" eval eval "PKG_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" else if test "$GCC" = "yes"; then PACKAGE_LIB_PREFIX=lib${PACKAGE_LIB_PREFIX} fi eval eval "PKG_LIB_FILE8=${PACKAGE_LIB_PREFIX8}${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" eval eval "PKG_LIB_FILE9=${PACKAGE_LIB_PREFIX9}${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" eval eval "PKG_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" fi # Some packages build their own stubs libraries eval eval "PKG_STUB_LIB_FILE=${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" if test "$GCC" = "yes"; then PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE} fi # These aren't needed on Windows (either MSVC or gcc) RANLIB=: RANLIB_STUB=: else RANLIB_STUB="${RANLIB}" if test "${SHARED_BUILD}" = "1" ; then SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" if test x"${TK_BIN_DIR}" != x ; then SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" fi eval eval "PKG_LIB_FILE8=lib${PACKAGE_LIB_PREFIX8}${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" eval eval "PKG_LIB_FILE9=lib${PACKAGE_LIB_PREFIX9}${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" eval eval "PKG_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" RANLIB=: else eval eval "PKG_LIB_FILE=lib${PACKAGE_LIB_PREFIX8}${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" eval eval "PKG_LIB_FILE=lib${PACKAGE_LIB_PREFIX9}${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" eval eval "PKG_LIB_FILE=lib${PACKAGE_LIB_PREFIX}${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" fi # Some packages build their own stubs libraries eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_LIB_PREFIX8}${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" fi # These are escaped so that only CFLAGS is picked up at configure time. # The other values will be substituted at make time. CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" if test "${SHARED_BUILD}" = "1" ; then CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" fi AC_SUBST(MAKE_LIB) AC_SUBST(MAKE_SHARED_LIB) AC_SUBST(MAKE_STATIC_LIB) AC_SUBST(MAKE_STUB_LIB) AC_SUBST(RANLIB_STUB) AC_SUBST(VC_MANIFEST_EMBED_DLL) AC_SUBST(VC_MANIFEST_EMBED_EXE) ]) #------------------------------------------------------------------------ # TEA_LIB_SPEC -- # # Compute the name of an existing object library located in libdir # from the given base name and produce the appropriate linker flags. # # Arguments: # basename The base name of the library without version # numbers, extensions, or "lib" prefixes. # extra_dir Extra directory in which to search for the # library. This location is used first, then # $prefix/$exec-prefix, then some defaults. # # Requires: # TEA_INIT and TEA_PREFIX must be called first. # # Results: # # Defines the following vars: # ${basename}_LIB_NAME The computed library name. # ${basename}_LIB_SPEC The computed linker flags. #------------------------------------------------------------------------ AC_DEFUN([TEA_LIB_SPEC], [ AC_MSG_CHECKING([for $1 library]) # Look in exec-prefix for the library (defined by TEA_PREFIX). tea_lib_name_dir="${exec_prefix}/lib" # Or in a user-specified location. if test x"$2" != x ; then tea_extra_lib_dir=$2 else tea_extra_lib_dir=NONE fi for i in \ `ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ `ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \ `ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ `ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \ `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \ `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \ `ls -dr /usr/lib64/$1[[0-9]]*.lib 2>/dev/null ` \ `ls -dr /usr/lib64/lib$1[[0-9]]* 2>/dev/null ` \ `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \ `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do if test -f "$i" ; then tea_lib_name_dir=`dirname $i` $1_LIB_NAME=`basename $i` $1_LIB_PATH_NAME=$i break fi done if test "${TEA_PLATFORM}" = "windows"; then $1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\" else # Strip off the leading "lib" and trailing ".a" or ".so" tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'` $1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}" fi if test "x${$1_LIB_NAME}" = x ; then AC_MSG_ERROR([not found]) else AC_MSG_RESULT([${$1_LIB_SPEC}]) fi ]) #------------------------------------------------------------------------ # TEA_PRIVATE_TCL_HEADERS -- # # Locate the private Tcl include files # # Arguments: # # Requires: # TCL_SRC_DIR Assumes that TEA_LOAD_TCLCONFIG has # already been called. # # Results: # # Substitutes the following vars: # TCL_TOP_DIR_NATIVE # TCL_INCLUDES #------------------------------------------------------------------------ AC_DEFUN([TEA_PRIVATE_TCL_HEADERS], [ # Allow for --with-tclinclude to take effect and define ${ac_cv_c_tclh} AC_REQUIRE([TEA_PUBLIC_TCL_HEADERS]) AC_MSG_CHECKING([for Tcl private include files]) TCL_SRC_DIR_NATIVE=`${CYGPATH} ${TCL_SRC_DIR}` TCL_TOP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}\" # Check to see if tclPort.h isn't already with the public headers # Don't look for tclInt.h because that resides with tcl.h in the core # sources, but the Port headers are in a different directory if test "${TEA_PLATFORM}" = "windows" -a \ -f "${ac_cv_c_tclh}/tclWinPort.h"; then result="private headers found with public headers" elif test "${TEA_PLATFORM}" = "unix" -a \ -f "${ac_cv_c_tclh}/tclUnixPort.h"; then result="private headers found with public headers" else TCL_GENERIC_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/generic\" if test "${TEA_PLATFORM}" = "windows"; then TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/win\" else TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/unix\" fi # Overwrite the previous TCL_INCLUDES as this should capture both # public and private headers in the same set. # We want to ensure these are substituted so as not to require # any *_NATIVE vars be defined in the Makefile TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}" if test "`uname -s`" = "Darwin"; then # If Tcl was built as a framework, attempt to use # the framework's Headers and PrivateHeaders directories case ${TCL_DEFS} in *TCL_FRAMEWORK*) if test -d "${TCL_BIN_DIR}/Headers" -a \ -d "${TCL_BIN_DIR}/PrivateHeaders"; then TCL_INCLUDES="-I\"${TCL_BIN_DIR}/Headers\" -I\"${TCL_BIN_DIR}/PrivateHeaders\" ${TCL_INCLUDES}" else TCL_INCLUDES="${TCL_INCLUDES} ${TCL_INCLUDE_SPEC} `echo "${TCL_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`" fi ;; esac result="Using ${TCL_INCLUDES}" else if test ! -f "${TCL_SRC_DIR}/generic/tclInt.h" ; then AC_MSG_ERROR([Cannot find private header tclInt.h in ${TCL_SRC_DIR}]) fi result="Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}" fi fi AC_SUBST(TCL_TOP_DIR_NATIVE) AC_SUBST(TCL_INCLUDES) AC_MSG_RESULT([${result}]) ]) #------------------------------------------------------------------------ # TEA_PUBLIC_TCL_HEADERS -- # # Locate the installed public Tcl header files # # Arguments: # None. # # Requires: # CYGPATH must be set # # Results: # # Adds a --with-tclinclude switch to configure. # Result is cached. # # Substitutes the following vars: # TCL_INCLUDES #------------------------------------------------------------------------ AC_DEFUN([TEA_PUBLIC_TCL_HEADERS], [ AC_MSG_CHECKING([for Tcl public headers]) AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files], with_tclinclude=${withval}) AC_CACHE_VAL(ac_cv_c_tclh, [ # Use the value from --with-tclinclude, if it was given if test x"${with_tclinclude}" != x ; then if test -f "${with_tclinclude}/tcl.h" ; then ac_cv_c_tclh=${with_tclinclude} else AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h]) fi else list="" if test "`uname -s`" = "Darwin"; then # If Tcl was built as a framework, attempt to use # the framework's Headers directory case ${TCL_DEFS} in *TCL_FRAMEWORK*) list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`" ;; esac fi # Look in the source dir only if Tcl is not installed, # and in that situation, look there before installed locations. if test -f "${TCL_BIN_DIR}/Makefile" ; then list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" fi # Check order: pkg --prefix location, Tcl's --prefix location, # relative to directory of tclConfig.sh. eval "temp_includedir=${includedir}" list="$list \ `ls -d ${temp_includedir} 2>/dev/null` \ `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then list="$list /usr/local/include /usr/include" if test x"${TCL_INCLUDE_SPEC}" != x ; then d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'` list="$list `ls -d ${d} 2>/dev/null`" fi fi for i in $list ; do if test -f "$i/tcl.h" ; then ac_cv_c_tclh=$i break fi done fi ]) # Print a message based on how we determined the include path if test x"${ac_cv_c_tclh}" = x ; then AC_MSG_ERROR([tcl.h not found. Please specify its location with --with-tclinclude]) else AC_MSG_RESULT([${ac_cv_c_tclh}]) fi # Convert to a native path and substitute into the output files. INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" AC_SUBST(TCL_INCLUDES) ]) #------------------------------------------------------------------------ # TEA_PRIVATE_TK_HEADERS -- # # Locate the private Tk include files # # Arguments: # # Requires: # TK_SRC_DIR Assumes that TEA_LOAD_TKCONFIG has # already been called. # # Results: # # Substitutes the following vars: # TK_INCLUDES #------------------------------------------------------------------------ AC_DEFUN([TEA_PRIVATE_TK_HEADERS], [ # Allow for --with-tkinclude to take effect and define ${ac_cv_c_tkh} AC_REQUIRE([TEA_PUBLIC_TK_HEADERS]) AC_MSG_CHECKING([for Tk private include files]) TK_SRC_DIR_NATIVE=`${CYGPATH} ${TK_SRC_DIR}` TK_TOP_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}\" # Check to see if tkPort.h isn't already with the public headers # Don't look for tkInt.h because that resides with tk.h in the core # sources, but the Port headers are in a different directory if test "${TEA_PLATFORM}" = "windows" -a \ -f "${ac_cv_c_tkh}/tkWinPort.h"; then result="private headers found with public headers" elif test "${TEA_PLATFORM}" = "unix" -a \ -f "${ac_cv_c_tkh}/tkUnixPort.h"; then result="private headers found with public headers" else TK_GENERIC_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/generic\" TK_XLIB_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/xlib\" if test "${TEA_PLATFORM}" = "windows"; then TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/win\" else TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/unix\" fi # Overwrite the previous TK_INCLUDES as this should capture both # public and private headers in the same set. # We want to ensure these are substituted so as not to require # any *_NATIVE vars be defined in the Makefile TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}" # Detect and add ttk subdir if test -d "${TK_SRC_DIR}/generic/ttk"; then TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/generic/ttk\"" fi if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then TK_INCLUDES="${TK_INCLUDES} -I\"${TK_XLIB_DIR_NATIVE}\"" fi if test "${TEA_WINDOWINGSYSTEM}" = "aqua"; then TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/macosx\"" fi if test "`uname -s`" = "Darwin"; then # If Tk was built as a framework, attempt to use # the framework's Headers and PrivateHeaders directories case ${TK_DEFS} in *TK_FRAMEWORK*) if test -d "${TK_BIN_DIR}/Headers" -a \ -d "${TK_BIN_DIR}/PrivateHeaders"; then TK_INCLUDES="-I\"${TK_BIN_DIR}/Headers\" -I\"${TK_BIN_DIR}/PrivateHeaders\" ${TK_INCLUDES}" else TK_INCLUDES="${TK_INCLUDES} ${TK_INCLUDE_SPEC} `echo "${TK_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`" fi ;; esac result="Using ${TK_INCLUDES}" else if test ! -f "${TK_SRC_DIR}/generic/tkInt.h" ; then AC_MSG_ERROR([Cannot find private header tkInt.h in ${TK_SRC_DIR}]) fi result="Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}" fi fi AC_SUBST(TK_TOP_DIR_NATIVE) AC_SUBST(TK_XLIB_DIR_NATIVE) AC_SUBST(TK_INCLUDES) AC_MSG_RESULT([${result}]) ]) #------------------------------------------------------------------------ # TEA_PUBLIC_TK_HEADERS -- # # Locate the installed public Tk header files # # Arguments: # None. # # Requires: # CYGPATH must be set # # Results: # # Adds a --with-tkinclude switch to configure. # Result is cached. # # Substitutes the following vars: # TK_INCLUDES #------------------------------------------------------------------------ AC_DEFUN([TEA_PUBLIC_TK_HEADERS], [ AC_MSG_CHECKING([for Tk public headers]) AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files], with_tkinclude=${withval}) AC_CACHE_VAL(ac_cv_c_tkh, [ # Use the value from --with-tkinclude, if it was given if test x"${with_tkinclude}" != x ; then if test -f "${with_tkinclude}/tk.h" ; then ac_cv_c_tkh=${with_tkinclude} else AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h]) fi else list="" if test "`uname -s`" = "Darwin"; then # If Tk was built as a framework, attempt to use # the framework's Headers directory. case ${TK_DEFS} in *TK_FRAMEWORK*) list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`" ;; esac fi # Look in the source dir only if Tk is not installed, # and in that situation, look there before installed locations. if test -f "${TK_BIN_DIR}/Makefile" ; then list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`" fi # Check order: pkg --prefix location, Tk's --prefix location, # relative to directory of tkConfig.sh, Tcl's --prefix location, # relative to directory of tclConfig.sh. eval "temp_includedir=${includedir}" list="$list \ `ls -d ${temp_includedir} 2>/dev/null` \ `ls -d ${TK_PREFIX}/include 2>/dev/null` \ `ls -d ${TK_BIN_DIR}/../include 2>/dev/null` \ `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then list="$list /usr/local/include /usr/include" if test x"${TK_INCLUDE_SPEC}" != x ; then d=`echo "${TK_INCLUDE_SPEC}" | sed -e 's/^-I//'` list="$list `ls -d ${d} 2>/dev/null`" fi fi for i in $list ; do if test -f "$i/tk.h" ; then ac_cv_c_tkh=$i break fi done fi ]) # Print a message based on how we determined the include path if test x"${ac_cv_c_tkh}" = x ; then AC_MSG_ERROR([tk.h not found. Please specify its location with --with-tkinclude]) else AC_MSG_RESULT([${ac_cv_c_tkh}]) fi # Convert to a native path and substitute into the output files. INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}` TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" AC_SUBST(TK_INCLUDES) if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then # On Windows and Aqua, we need the X compat headers AC_MSG_CHECKING([for X11 header files]) if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`" TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" AC_SUBST(TK_XINCLUDES) fi AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}]) fi ]) #------------------------------------------------------------------------ # TEA_PATH_CONFIG -- # # Locate the ${1}Config.sh file and perform a sanity check on # the ${1} compile flags. These are used by packages like # [incr Tk] that load *Config.sh files from more than Tcl and Tk. # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --with-$1=... # # Defines the following vars: # $1_BIN_DIR Full path to the directory containing # the $1Config.sh file #------------------------------------------------------------------------ AC_DEFUN([TEA_PATH_CONFIG], [ # # Ok, lets find the $1 configuration # First, look for one uninstalled. # the alternative search directory is invoked by --with-$1 # if test x"${no_$1}" = x ; then # we reset no_$1 in case something fails here no_$1=true AC_ARG_WITH($1, [ --with-$1 directory containing $1 configuration ($1Config.sh)], with_$1config=${withval}) AC_MSG_CHECKING([for $1 configuration]) AC_CACHE_VAL(ac_cv_c_$1config,[ # First check to see if --with-$1 was specified. if test x"${with_$1config}" != x ; then case ${with_$1config} in */$1Config.sh ) if test -f ${with_$1config}; then AC_MSG_WARN([--with-$1 argument should refer to directory containing $1Config.sh, not to $1Config.sh itself]) with_$1config=`echo ${with_$1config} | sed 's!/$1Config\.sh$!!'` fi;; esac if test -f "${with_$1config}/$1Config.sh" ; then ac_cv_c_$1config=`(cd ${with_$1config}; pwd)` else AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh]) fi fi # then check for a private $1 installation if test x"${ac_cv_c_$1config}" = x ; then for i in \ ../$1 \ `ls -dr ../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ `ls -dr ../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ `ls -dr ../$1*[[0-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ ../../$1 \ `ls -dr ../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ `ls -dr ../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ `ls -dr ../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ ../../../$1 \ `ls -dr ../../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ `ls -dr ../../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ `ls -dr ../../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ ${srcdir}/../$1 \ `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]] 2>/dev/null` \ `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ ; do if test -f "$i/$1Config.sh" ; then ac_cv_c_$1config=`(cd $i; pwd)` break fi if test -f "$i/unix/$1Config.sh" ; then ac_cv_c_$1config=`(cd $i/unix; pwd)` break fi done fi # check in a few common install locations if test x"${ac_cv_c_$1config}" = x ; then for i in `ls -d ${libdir} 2>/dev/null` \ `ls -d ${exec_prefix}/lib 2>/dev/null` \ `ls -d ${prefix}/lib 2>/dev/null` \ `ls -d /usr/local/lib 2>/dev/null` \ `ls -d /usr/contrib/lib 2>/dev/null` \ `ls -d /usr/pkg/lib 2>/dev/null` \ `ls -d /usr/lib 2>/dev/null` \ `ls -d /usr/lib64 2>/dev/null` \ ; do if test -f "$i/$1Config.sh" ; then ac_cv_c_$1config=`(cd $i; pwd)` break fi done fi ]) if test x"${ac_cv_c_$1config}" = x ; then $1_BIN_DIR="# no $1 configs found" AC_MSG_WARN([Cannot find $1 configuration definitions]) exit 0 else no_$1= $1_BIN_DIR=${ac_cv_c_$1config} AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh]) fi fi ]) #------------------------------------------------------------------------ # TEA_LOAD_CONFIG -- # # Load the $1Config.sh file # # Arguments: # # Requires the following vars to be set: # $1_BIN_DIR # # Results: # # Substitutes the following vars: # $1_SRC_DIR # $1_LIB_FILE # $1_LIB_SPEC #------------------------------------------------------------------------ AC_DEFUN([TEA_LOAD_CONFIG], [ AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh]) if test -f "${$1_BIN_DIR}/$1Config.sh" ; then AC_MSG_RESULT([loading]) . "${$1_BIN_DIR}/$1Config.sh" else AC_MSG_RESULT([file not found]) fi # # If the $1_BIN_DIR is the build directory (not the install directory), # then set the common variable name to the value of the build variables. # For example, the variable $1_LIB_SPEC will be set to the value # of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC # instead of $1_BUILD_LIB_SPEC since it will work with both an # installed and uninstalled version of Tcl. # if test -f "${$1_BIN_DIR}/Makefile" ; then AC_MSG_WARN([Found Makefile - using build library specs for $1]) $1_LIB_SPEC=${$1_BUILD_LIB_SPEC} $1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC} $1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH} $1_INCLUDE_SPEC=${$1_BUILD_INCLUDE_SPEC} $1_LIBRARY_PATH=${$1_LIBRARY_PATH} fi AC_SUBST($1_VERSION) AC_SUBST($1_BIN_DIR) AC_SUBST($1_SRC_DIR) AC_SUBST($1_LIB_FILE) AC_SUBST($1_LIB_SPEC) AC_SUBST($1_STUB_LIB_FILE) AC_SUBST($1_STUB_LIB_SPEC) AC_SUBST($1_STUB_LIB_PATH) # Allow the caller to prevent this auto-check by specifying any 2nd arg AS_IF([test "x$2" = x], [ # Check both upper and lower-case variants # If a dev wanted non-stubs libs, this function could take an option # to not use _STUB in the paths below AS_IF([test "x${$1_STUB_LIB_SPEC}" = x], [TEA_LOAD_CONFIG_LIB(translit($1,[a-z],[A-Z])_STUB)], [TEA_LOAD_CONFIG_LIB($1_STUB)]) ]) ]) #------------------------------------------------------------------------ # TEA_LOAD_CONFIG_LIB -- # # Helper function to load correct library from another extension's # ${PACKAGE}Config.sh. # # Results: # Adds to LIBS the appropriate extension library #------------------------------------------------------------------------ AC_DEFUN([TEA_LOAD_CONFIG_LIB], [ AC_MSG_CHECKING([For $1 library for LIBS]) # This simplifies the use of stub libraries by automatically adding # the stub lib to your path. Normally this would add to SHLIB_LD_LIBS, # but this is called before CONFIG_CFLAGS. More importantly, this adds # to PKG_LIBS, which becomes LIBS, and that is only used by SHLIB_LD. if test "x${$1_LIB_SPEC}" != "x" ; then if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes" ; then TEA_ADD_LIBS([\"`${CYGPATH} ${$1_LIB_PATH}`\"]) AC_MSG_RESULT([using $1_LIB_PATH ${$1_LIB_PATH}]) else TEA_ADD_LIBS([${$1_LIB_SPEC}]) AC_MSG_RESULT([using $1_LIB_SPEC ${$1_LIB_SPEC}]) fi else AC_MSG_RESULT([file not found]) fi ]) #------------------------------------------------------------------------ # TEA_EXPORT_CONFIG -- # # Define the data to insert into the ${PACKAGE}Config.sh file # # Arguments: # # Requires the following vars to be set: # $1 # # Results: # Substitutes the following vars: #------------------------------------------------------------------------ AC_DEFUN([TEA_EXPORT_CONFIG], [ #-------------------------------------------------------------------- # These are for $1Config.sh #-------------------------------------------------------------------- # pkglibdir must be a fully qualified path and (not ${exec_prefix}/lib) eval pkglibdir="[$]{libdir}/$1${PACKAGE_VERSION}" if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then eval $1_LIB_FLAG="-l$1${PACKAGE_VERSION}" eval $1_STUB_LIB_FLAG="-l$1stub${PACKAGE_VERSION}" else eval $1_LIB_FLAG="-l$1`echo ${PACKAGE_VERSION} | tr -d .`" eval $1_STUB_LIB_FLAG="-l$1stub`echo ${PACKAGE_VERSION} | tr -d .`" fi $1_BUILD_LIB_SPEC="-L`$CYGPATH $(pwd)` ${$1_LIB_FLAG}" $1_LIB_SPEC="-L`$CYGPATH ${pkglibdir}` ${$1_LIB_FLAG}" $1_BUILD_STUB_LIB_SPEC="-L`$CYGPATH $(pwd)` [$]{$1_STUB_LIB_FLAG}" $1_STUB_LIB_SPEC="-L`$CYGPATH ${pkglibdir}` [$]{$1_STUB_LIB_FLAG}" $1_BUILD_STUB_LIB_PATH="`$CYGPATH $(pwd)`/[$]{PKG_STUB_LIB_FILE}" $1_STUB_LIB_PATH="`$CYGPATH ${pkglibdir}`/[$]{PKG_STUB_LIB_FILE}" AC_SUBST($1_BUILD_LIB_SPEC) AC_SUBST($1_LIB_SPEC) AC_SUBST($1_BUILD_STUB_LIB_SPEC) AC_SUBST($1_STUB_LIB_SPEC) AC_SUBST($1_BUILD_STUB_LIB_PATH) AC_SUBST($1_STUB_LIB_PATH) AC_SUBST(MAJOR_VERSION) AC_SUBST(MINOR_VERSION) AC_SUBST(PATCHLEVEL) ]) #------------------------------------------------------------------------ # TEA_INSTALLER -- # # Configure the installer. # # Arguments: # none # # Results: # Substitutes the following vars: # INSTALL # INSTALL_DATA_DIR # INSTALL_DATA # INSTALL_PROGRAM # INSTALL_SCRIPT # INSTALL_LIBRARY #------------------------------------------------------------------------ AC_DEFUN([TEA_INSTALLER], [ INSTALL='$(SHELL) $(srcdir)/tclconfig/install-sh -c' INSTALL_DATA_DIR='${INSTALL} -d -m 755' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL} -m 755' INSTALL_SCRIPT='${INSTALL} -m 755' TEA_CONFIG_SYSTEM case $system in HP-UX-*) INSTALL_LIBRARY='${INSTALL} -m 755' ;; *) INSTALL_LIBRARY='${INSTALL} -m 644' ;; esac AC_SUBST(INSTALL) AC_SUBST(INSTALL_DATA_DIR) AC_SUBST(INSTALL_DATA) AC_SUBST(INSTALL_PROGRAM) AC_SUBST(INSTALL_SCRIPT) AC_SUBST(INSTALL_LIBRARY) ]) ### # Tip 430 - ZipFS Modifications ### #------------------------------------------------------------------------ # TEA_ZIPFS_SUPPORT # Locate a zip encoder installed on the system path, or none. # # Arguments: # none # # Results: # Substitutes the following vars: # MACHER_PROG # ZIP_PROG # ZIP_PROG_OPTIONS # ZIP_PROG_VFSSEARCH # ZIP_INSTALL_OBJS #------------------------------------------------------------------------ AC_DEFUN([TEA_ZIPFS_SUPPORT], [ MACHER_PROG="" ZIP_PROG="" ZIP_PROG_OPTIONS="" ZIP_PROG_VFSSEARCH="" ZIP_INSTALL_OBJS="" AC_MSG_CHECKING([for macher]) AC_CACHE_VAL(ac_cv_path_macher, [ search_path=`echo ${PATH} | sed -e 's/:/ /g'` for dir in $search_path ; do for j in `ls -r $dir/macher 2> /dev/null` \ `ls -r $dir/macher 2> /dev/null` ; do if test x"$ac_cv_path_macher" = x ; then if test -f "$j" ; then ac_cv_path_macher=$j break fi fi done done ]) if test -f "$ac_cv_path_macher" ; then MACHER_PROG="$ac_cv_path_macher" AC_MSG_RESULT([$MACHER_PROG]) AC_MSG_RESULT([Found macher in environment]) fi AC_MSG_CHECKING([for zip]) AC_CACHE_VAL(ac_cv_path_zip, [ search_path=`echo ${PATH} | sed -e 's/:/ /g'` for dir in $search_path ; do for j in `ls -r $dir/zip 2> /dev/null` \ `ls -r $dir/zip 2> /dev/null` ; do if test x"$ac_cv_path_zip" = x ; then if test -f "$j" ; then ac_cv_path_zip=$j break fi fi done done ]) if test -f "$ac_cv_path_zip" ; then ZIP_PROG="$ac_cv_path_zip" AC_MSG_RESULT([$ZIP_PROG]) ZIP_PROG_OPTIONS="-rq" ZIP_PROG_VFSSEARCH="*" AC_MSG_RESULT([Found INFO Zip in environment]) # Use standard arguments for zip else # It is not an error if an installed version of Zip can't be located. # We can use the locally distributed minizip instead ZIP_PROG="./minizip${EXEEXT_FOR_BUILD}" ZIP_PROG_OPTIONS="-o -r" ZIP_PROG_VFSSEARCH="*" ZIP_INSTALL_OBJS="minizip${EXEEXT_FOR_BUILD}" AC_MSG_RESULT([No zip found on PATH. Building minizip]) fi AC_SUBST(MACHER_PROG) AC_SUBST(ZIP_PROG) AC_SUBST(ZIP_PROG_OPTIONS) AC_SUBST(ZIP_PROG_VFSSEARCH) AC_SUBST(ZIP_INSTALL_OBJS) ]) # Local Variables: # mode: autoconf # End: