////////////////////////////////////////////////////////////////////// //// //// //// eth_defines.v //// //// //// //// This file is part of the Ethernet IP core project //// //// http://www.opencores.org/projects/ethmac/ //// //// //// //// Author(s): //// //// - Igor Mohor (igorM@opencores.org) //// //// //// //// All additional information is available in the Readme.txt //// //// file. //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2001, 2002 Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: eth_defines.v,v $ // Revision 1.34 2005/02/21 12:48:06 igorm // Warning fixes. // // Revision 1.33 2003/11/12 18:24:58 tadejm // WISHBONE slave changed and tested from only 32-bit accesss to byte access. // // Revision 1.32 2003/10/17 07:46:13 markom // mbist signals updated according to newest convention // // Revision 1.31 2003/08/14 16:42:58 simons // Artisan ram instance added. // // Revision 1.30 2003/06/13 11:55:37 mohor // Define file in eth_cop.v is changed to eth_defines.v. Some defines were // moved from tb_eth_defines.v to eth_defines.v. // // Revision 1.29 2002/11/19 18:13:49 mohor // r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead. // // Revision 1.28 2002/11/15 14:27:15 mohor // Since r_Rst bit is not used any more, default value is changed to 0xa000. // // Revision 1.27 2002/11/01 18:19:34 mohor // Defines fixed to use generic RAM by default. // // Revision 1.26 2002/10/24 18:53:03 mohor // fpga define added. // // Revision 1.3 2002/10/11 16:57:54 igorm // eth_defines.v tagged with rel_5 used. // // Revision 1.25 2002/10/10 16:47:44 mohor // Defines changed to have ETH_ prolog. // ETH_WISHBONE_B# define added. // // Revision 1.24 2002/10/10 16:33:11 mohor // Bist added. // // Revision 1.23 2002/09/23 18:22:48 mohor // Virtual Silicon RAM might be used in the ASIC implementation of the ethernet // core. // // Revision 1.22 2002/09/04 18:36:49 mohor // Defines for control registers added (ETH_TXCTRL and ETH_RXCTRL). // // Revision 1.21 2002/08/16 22:09:47 mohor // Defines for register width added. mii_rst signal in MIIMODER register // changed. // // Revision 1.20 2002/08/14 19:31:48 mohor // Register TX_BD_NUM is changed so it contains value of the Tx buffer descriptors. No // need to multiply or devide any more. // // Revision 1.19 2002/07/23 15:28:31 mohor // Ram , used for BDs changed from generic_spram to eth_spram_256x32. // // Revision 1.18 2002/05/03 10:15:50 mohor // Outputs registered. Reset changed for eth_wishbone module. // // Revision 1.17 2002/04/24 08:52:19 mohor // Compiler directives added. Tx and Rx fifo size incremented. A "late collision" // bug fixed. // // Revision 1.16 2002/03/19 12:53:29 mohor // Some defines that are used in testbench only were moved to tb_eth_defines.v // file. // // Revision 1.15 2002/02/26 16:11:32 mohor // Number of interrupts changed // // Revision 1.14 2002/02/16 14:03:44 mohor // Registered trimmed. Unused registers removed. // // Revision 1.13 2002/02/16 13:06:33 mohor // EXTERNAL_DMA used instead of WISHBONE_DMA. // // Revision 1.12 2002/02/15 10:58:31 mohor // Changed that were lost with last update put back to the file. // // Revision 1.11 2002/02/14 20:19:41 billditt // Modified for Address Checking, // addition of eth_addrcheck.v // // Revision 1.10 2002/02/12 17:01:19 mohor // HASH0 and HASH1 registers added. // Revision 1.9 2002/02/08 16:21:54 mohor // Rx status is written back to the BD. // // Revision 1.8 2002/02/05 16:44:38 mohor // Both rx and tx part are finished. Tested with wb_clk_i between 10 and 200 // MHz. Statuses, overrun, control frame transmission and reception still need // to be fixed. // // Revision 1.7 2002/01/23 10:28:16 mohor // Link in the header changed. // // Revision 1.6 2001/12/05 15:00:16 mohor // RX_BD_NUM changed to TX_BD_NUM (holds number of TX descriptors // instead of the number of RX descriptors). // // Revision 1.5 2001/12/05 10:21:37 mohor // ETH_RX_BD_ADR register deleted. ETH_RX_BD_NUM is used instead. // // Revision 1.4 2001/11/13 14:23:56 mohor // Generic memory model is used. Defines are changed for the same reason. // // Revision 1.3 2001/10/18 12:07:11 mohor // Status signals changed, Adress decoding changed, interrupt controller // added. // // Revision 1.2 2001/09/24 15:02:56 mohor // Defines changed (All precede with ETH_). Small changes because some // tools generate warnings when two operands are together. Synchronization // between two clocks domains in eth_wishbonedma.v is changed (due to ASIC // demands). // // Revision 1.1 2001/08/06 14:44:29 mohor // A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex). // Include files fixed to contain no path. // File names and module names changed ta have a eth_ prologue in the name. // File eth_timescale.v is used to define timescale // All pin names on the top module are changed to contain _I, _O or _OE at the end. // Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O // and Mdo_OE. The bidirectional signal must be created on the top level. This // is done due to the ASIC tools. // // Revision 1.1 2001/07/30 21:23:42 mohor // Directory structure changed. Files checked and joind together. // // // // // //`define ETH_BIST // Bist for usage with Virtual Silicon RAMS `define ETH_MBIST_CTRL_WIDTH 3 // width of MBIST control bus // Ethernet implemented in Xilinx Chips (uncomment following lines) // `define ETH_FIFO_XILINX // Use Xilinx distributed ram for tx and rx fifo // `define ETH_XILINX_RAMB4 // Selection of the used memory for Buffer descriptors // Core is going to be implemented in Virtex FPGA and contains Virtex // specific elements. // Ethernet implemented in Altera Chips (uncomment following lines) //`define ETH_ALTERA_ALTSYNCRAM // Ethernet implemented in ASIC with Virtual Silicon RAMs // `define ETH_VIRTUAL_SILICON_RAM // Virtual Silicon RAMS used storing buffer decriptors (ASIC implementation) // Ethernet implemented in ASIC with Artisan RAMs // `define ETH_ARTISAN_RAM // Artisan RAMS used storing buffer decriptors (ASIC implementation) // Uncomment when Avalon bus is used //`define ETH_AVALON_BUS `define ETH_MODER_ADR 8'h0 // 0x0 `define ETH_INT_SOURCE_ADR 8'h1 // 0x4 `define ETH_INT_MASK_ADR 8'h2 // 0x8 `define ETH_IPGT_ADR 8'h3 // 0xC `define ETH_IPGR1_ADR 8'h4 // 0x10 `define ETH_IPGR2_ADR 8'h5 // 0x14 `define ETH_PACKETLEN_ADR 8'h6 // 0x18 `define ETH_COLLCONF_ADR 8'h7 // 0x1C `define ETH_TX_BD_NUM_ADR 8'h8 // 0x20 `define ETH_CTRLMODER_ADR 8'h9 // 0x24 `define ETH_MIIMODER_ADR 8'hA // 0x28 `define ETH_MIICOMMAND_ADR 8'hB // 0x2C `define ETH_MIIADDRESS_ADR 8'hC // 0x30 `define ETH_MIITX_DATA_ADR 8'hD // 0x34 `define ETH_MIIRX_DATA_ADR 8'hE // 0x38 `define ETH_MIISTATUS_ADR 8'hF // 0x3C `define ETH_MAC_ADDR0_ADR 8'h10 // 0x40 `define ETH_MAC_ADDR1_ADR 8'h11 // 0x44 `define ETH_HASH0_ADR 8'h12 // 0x48 `define ETH_HASH1_ADR 8'h13 // 0x4C `define ETH_TX_CTRL_ADR 8'h14 // 0x50 `define ETH_RX_CTRL_ADR 8'h15 // 0x54 `define ETH_MODER_DEF_0 8'h00 `define ETH_MODER_DEF_1 8'hA0 `define ETH_MODER_DEF_2 1'h0 `define ETH_INT_MASK_DEF_0 7'h0 `define ETH_IPGT_DEF_0 7'h12 `define ETH_IPGR1_DEF_0 7'h0C `define ETH_IPGR2_DEF_0 7'h12 `define ETH_PACKETLEN_DEF_0 8'h00 `define ETH_PACKETLEN_DEF_1 8'h06 `define ETH_PACKETLEN_DEF_2 8'h40 `define ETH_PACKETLEN_DEF_3 8'h00 `define ETH_COLLCONF_DEF_0 6'h3f `define ETH_COLLCONF_DEF_2 4'hF `define ETH_TX_BD_NUM_DEF_0 8'h40 `define ETH_CTRLMODER_DEF_0 3'h0 `define ETH_MIIMODER_DEF_0 8'h64 `define ETH_MIIMODER_DEF_1 1'h0 `define ETH_MIIADDRESS_DEF_0 5'h00 `define ETH_MIIADDRESS_DEF_1 5'h00 `define ETH_MIITX_DATA_DEF_0 8'h00 `define ETH_MIITX_DATA_DEF_1 8'h00 `define ETH_MIIRX_DATA_DEF 16'h0000 // not written from WB `define ETH_MAC_ADDR0_DEF_0 8'h00 `define ETH_MAC_ADDR0_DEF_1 8'h00 `define ETH_MAC_ADDR0_DEF_2 8'h00 `define ETH_MAC_ADDR0_DEF_3 8'h00 `define ETH_MAC_ADDR1_DEF_0 8'h00 `define ETH_MAC_ADDR1_DEF_1 8'h00 `define ETH_HASH0_DEF_0 8'h00 `define ETH_HASH0_DEF_1 8'h00 `define ETH_HASH0_DEF_2 8'h00 `define ETH_HASH0_DEF_3 8'h00 `define ETH_HASH1_DEF_0 8'h00 `define ETH_HASH1_DEF_1 8'h00 `define ETH_HASH1_DEF_2 8'h00 `define ETH_HASH1_DEF_3 8'h00 `define ETH_TX_CTRL_DEF_0 8'h00 // `define ETH_TX_CTRL_DEF_1 8'h00 // `define ETH_TX_CTRL_DEF_2 1'h0 // `define ETH_RX_CTRL_DEF_0 8'h00 `define ETH_RX_CTRL_DEF_1 8'h00 `define ETH_MODER_WIDTH_0 8 `define ETH_MODER_WIDTH_1 8 `define ETH_MODER_WIDTH_2 1 `define ETH_INT_SOURCE_WIDTH_0 7 `define ETH_INT_MASK_WIDTH_0 7 `define ETH_IPGT_WIDTH_0 7 `define ETH_IPGR1_WIDTH_0 7 `define ETH_IPGR2_WIDTH_0 7 `define ETH_PACKETLEN_WIDTH_0 8 `define ETH_PACKETLEN_WIDTH_1 8 `define ETH_PACKETLEN_WIDTH_2 8 `define ETH_PACKETLEN_WIDTH_3 8 `define ETH_COLLCONF_WIDTH_0 6 `define ETH_COLLCONF_WIDTH_2 4 `define ETH_TX_BD_NUM_WIDTH_0 8 `define ETH_CTRLMODER_WIDTH_0 3 `define ETH_MIIMODER_WIDTH_0 8 `define ETH_MIIMODER_WIDTH_1 1 `define ETH_MIICOMMAND_WIDTH_0 3 `define ETH_MIIADDRESS_WIDTH_0 5 `define ETH_MIIADDRESS_WIDTH_1 5 `define ETH_MIITX_DATA_WIDTH_0 8 `define ETH_MIITX_DATA_WIDTH_1 8 `define ETH_MIIRX_DATA_WIDTH 16 // not written from WB `define ETH_MIISTATUS_WIDTH 3 // not written from WB `define ETH_MAC_ADDR0_WIDTH_0 8 `define ETH_MAC_ADDR0_WIDTH_1 8 `define ETH_MAC_ADDR0_WIDTH_2 8 `define ETH_MAC_ADDR0_WIDTH_3 8 `define ETH_MAC_ADDR1_WIDTH_0 8 `define ETH_MAC_ADDR1_WIDTH_1 8 `define ETH_HASH0_WIDTH_0 8 `define ETH_HASH0_WIDTH_1 8 `define ETH_HASH0_WIDTH_2 8 `define ETH_HASH0_WIDTH_3 8 `define ETH_HASH1_WIDTH_0 8 `define ETH_HASH1_WIDTH_1 8 `define ETH_HASH1_WIDTH_2 8 `define ETH_HASH1_WIDTH_3 8 `define ETH_TX_CTRL_WIDTH_0 8 `define ETH_TX_CTRL_WIDTH_1 8 `define ETH_TX_CTRL_WIDTH_2 1 `define ETH_RX_CTRL_WIDTH_0 8 `define ETH_RX_CTRL_WIDTH_1 8 // Outputs are registered (uncomment when needed) `define ETH_REGISTERED_OUTPUTS // Settings for TX FIFO `define ETH_TX_FIFO_CNT_WIDTH 5 `define ETH_TX_FIFO_DEPTH 16 `define ETH_TX_FIFO_DATA_WIDTH 32 // Settings for RX FIFO `define ETH_RX_FIFO_CNT_WIDTH 5 `define ETH_RX_FIFO_DEPTH 16 `define ETH_RX_FIFO_DATA_WIDTH 32 // Burst length `define ETH_BURST_LENGTH 4 // Change also ETH_BURST_CNT_WIDTH `define ETH_BURST_CNT_WIDTH 3 // The counter must be width enough to count to ETH_BURST_LENGTH // WISHBONE interface is Revision B3 compliant (uncomment when needed) //`define ETH_WISHBONE_B3 // Following defines are needed when eth_cop.v is used. Otherwise they may be deleted. `define ETH_BASE 32'hd0000000 `define ETH_WIDTH 32'h800 `define MEMORY_BASE 32'h2000 `define MEMORY_WIDTH 32'h10000 `define M1_ADDRESSED_S1 ( (m1_wb_adr_i >= `ETH_BASE) & (m1_wb_adr_i < (`ETH_BASE + `ETH_WIDTH )) ) `define M1_ADDRESSED_S2 ( (m1_wb_adr_i >= `MEMORY_BASE) & (m1_wb_adr_i < (`MEMORY_BASE + `MEMORY_WIDTH)) ) `define M2_ADDRESSED_S1 ( (m2_wb_adr_i >= `ETH_BASE) & (m2_wb_adr_i < (`ETH_BASE + `ETH_WIDTH )) ) `define M2_ADDRESSED_S2 ( (m2_wb_adr_i >= `MEMORY_BASE) & (m2_wb_adr_i < (`MEMORY_BASE + `MEMORY_WIDTH)) ) // Previous defines are only needed for eth_cop.v