////////////////////////////////////////////////////////////////////// //// //// //// File name: wb_master.v //// //// //// //// This file is part of the "PCI bridge" project //// //// http://www.opencores.org/cores/pci/ //// //// //// //// Author(s): //// //// - Tadej Markovic, tadej@opencores.org //// //// //// //// All additional information is avaliable in the README.txt //// //// file. //// //// //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Tadej Markovic, tadej@opencores.org //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: pci_wb_master.v,v $ // Revision 1.6 2004/01/24 11:54:18 mihad // Update! SPOCI Implemented! // // Revision 1.5 2003/10/24 09:35:40 tadejm // Added missing signals to 2 sensitivity lists. Everything works the same as before. // // Revision 1.4 2003/08/21 20:56:40 tadejm // WB Master is now WISHBONE B3 compatible. // // Revision 1.3 2003/03/14 15:31:57 mihad // Entered the option to disable no response counter in wb master. // // Revision 1.2 2003/01/30 22:01:09 mihad // Updated synchronization in top level fifo modules. // // Revision 1.1 2003/01/27 16:49:31 mihad // Changed module and file names. Updated scripts accordingly. FIFO synchronizations changed. // // Revision 1.7 2002/12/05 12:19:23 mihad // *** empty log message *** // // Revision 1.6 2002/10/11 14:15:29 mihad // Cleaned up non-blocking assignments in combinatinal logic statements // // Revision 1.5 2002/03/05 11:53:47 mihad // Added some testcases, removed un-needed fifo signals // // Revision 1.4 2002/02/19 16:32:37 mihad // Modified testbench and fixed some bugs // // Revision 1.3 2002/02/01 15:25:13 mihad // Repaired a few bugs, updated specification, added test bench files and design document // // Revision 1.2 2001/10/05 08:14:30 mihad // Updated all files with inclusion of timescale file for simulation purposes. // // Revision 1.1.1.1 2001/10/02 15:33:47 mihad // New project directory structure // // `define WB_FSM_BITS 3 // number of bits needed for FSM states `include "bus_commands.v" `include "pci_constants.v" //synopsys translate_off `include "timescale.v" //synopsys translate_on module pci_wb_master ( wb_clock_in, // CLK_I reset_in, // RST_I pci_tar_read_request, pci_tar_address, pci_tar_cmd, pci_tar_be, pci_tar_burst_ok, pci_cache_line_size, cache_lsize_not_zero, wb_read_done_out, w_attempt, pcir_fifo_wenable_out, pcir_fifo_data_out, pcir_fifo_be_out, pcir_fifo_control_out, //pcir_fifo_renable_out, for PCI Target !!! //pcir_fifo_data_in, for PCI Target !!! //pcir_fifo_be_in, for PCI Target !!! //pcir_fifo_control_in, for PCI Target !!! //pcir_fifo_flush_out, for PCI Target !!! //pcir_fifo_almost_empty_in, for PCI Target !!! //pcir_fifo_empty_in, NOT used //pcir_fifo_transaction_ready_in, NOT used //pciw_fifo_wenable_out, for PCI Target !!! //pciw_fifo_addr_data_out, for PCI Target !!! //pciw_fifo_cbe_out, for PCI Target !!! //pciw_fifo_control_out, for PCI Target !!! pciw_fifo_renable_out, pciw_fifo_addr_data_in, pciw_fifo_cbe_in, pciw_fifo_control_in, //pciw_fifo_flush_out, NOT used //pciw_fifo_almost_full_in, for PCI Target !!! //pciw_fifo_full_in, for PCI Target !!! pciw_fifo_almost_empty_in, pciw_fifo_empty_in, pciw_fifo_transaction_ready_in, pci_error_sig_out, pci_error_bc, write_rty_cnt_exp_out, error_source_out, read_rty_cnt_exp_out, wb_cyc_o, wb_stb_o, wb_we_o, wb_cti_o, wb_bte_o, wb_sel_o, wb_adr_o, wb_dat_i, wb_dat_o, wb_ack_i, wb_rty_i, wb_err_i // CYC_O, // STB_O, // WE_O, // SEL_O, // ADR_O, // MDATA_I, // MDATA_O, // ACK_I, // RTY_I, // ERR_I, ); /*---------------------------------------------------------------------------------------------------------------------- Various parameters needed for state machine and other stuff ----------------------------------------------------------------------------------------------------------------------*/ parameter S_IDLE = `WB_FSM_BITS'h0 ; parameter S_WRITE = `WB_FSM_BITS'h1 ; parameter S_WRITE_ERR_RTY = `WB_FSM_BITS'h2 ; parameter S_READ = `WB_FSM_BITS'h3 ; parameter S_READ_RTY = `WB_FSM_BITS'h4 ; parameter S_TURN_ARROUND = `WB_FSM_BITS'h5 ; /*---------------------------------------------------------------------------------------------------------------------- System signals inputs wb_clock_in - WISHBONE bus clock input reset_in - system reset input controlled by bridge's reset logic ----------------------------------------------------------------------------------------------------------------------*/ input wb_clock_in ; input reset_in ; /*---------------------------------------------------------------------------------------------------------------------- Control signals from PCI Target for READS to PCIR_FIFO ---------------------------------------------------------------------------------------------------------------------*/ input pci_tar_read_request ; // read request from PCI Target input [31:0] pci_tar_address ; // address for requested read from PCI Target input [3:0] pci_tar_cmd ; // command for requested read from PCI Target input [3:0] pci_tar_be ; // byte enables for requested read from PCI Target input pci_tar_burst_ok ; input [7:0] pci_cache_line_size ; // CACHE line size register value for burst length input cache_lsize_not_zero ; output wb_read_done_out ; // read done and PCIR_FIFO has data ready output w_attempt ; reg wb_read_done_out ; reg wb_read_done ; /*---------------------------------------------------------------------------------------------------------------------- PCIR_FIFO control signals used for sinking data into PCIR_FIFO and status monitoring ---------------------------------------------------------------------------------------------------------------------*/ output pcir_fifo_wenable_out ; // PCIR_FIFO write enable output output [31:0] pcir_fifo_data_out ; // data output to PCIR_FIFO output [3:0] pcir_fifo_be_out ; // byte enable output to PCIR_FIFO output [3:0] pcir_fifo_control_out ; // control bus output to PCIR_FIFO reg [31:0] pcir_fifo_data_out ; reg pcir_fifo_wenable_out ; reg pcir_fifo_wenable ; reg [3:0] pcir_fifo_control_out ; reg [3:0] pcir_fifo_control ; /*---------------------------------------------------------------------------------------------------------------------- PCIW_FIFO control signals used for fetching data from PCIW_FIFO and status monitoring ---------------------------------------------------------------------------------------------------------------------*/ output pciw_fifo_renable_out ; // read enable for PCIW_FIFO output input [31:0] pciw_fifo_addr_data_in ; // address and data input from PCIW_FIFO input [3:0] pciw_fifo_cbe_in ; // command and byte_enables from PCIW_FIFO input [3:0] pciw_fifo_control_in ; // control bus input from PCIW_FIFO input pciw_fifo_almost_empty_in ; // almost empty status indicator from PCIW_FIFO input pciw_fifo_empty_in ; // empty status indicator from PCIW_FIFO input pciw_fifo_transaction_ready_in ; // write transaction is ready in PCIW_FIFO reg pciw_fifo_renable_out ; reg pciw_fifo_renable ; /*---------------------------------------------------------------------------------------------------------------------- Control INPUT / OUTPUT signals for configuration space reporting registers !!! ---------------------------------------------------------------------------------------------------------------------*/ output pci_error_sig_out ; // When error occures (on WB bus, retry counter, etc.) output [3:0] pci_error_bc ; // bus command at which error occured ! output write_rty_cnt_exp_out ; // Signaling that RETRY counter has expired during write transaction! output read_rty_cnt_exp_out ; // Signaling that RETRY counter has expired during read transaction! // if error_source is '0' other side didn't respond // if error_source is '1' other side RETRIED for max retry counter value output error_source_out ; // Signaling error source - '0' other WB side signaled error OR didn't respond // if '1' wridge counted max value in retry counter because of RTY responds reg pci_error_sig_out ; reg write_rty_cnt_exp_out ; reg read_rty_cnt_exp_out ; reg error_source_out ; /*---------------------------------------------------------------------------------------------------------------------- WISHBONE bus interface signals - can be connected directly to WISHBONE bus ---------------------------------------------------------------------------------------------------------------------*/ output wb_cyc_o; // cycle indicator output output wb_stb_o; // strobe output - data is valid when strobe and cycle indicator are high output wb_we_o; // write enable output - 1 - write operation, 0 - read operation output [2:0] wb_cti_o; // WB B3 - cycle type identifier output [1:0] wb_bte_o; // WB B3 - burst type output [3:0] wb_sel_o; // Byte select outputs output [31:0] wb_adr_o; // WISHBONE address output input [31:0] wb_dat_i; // WISHBONE interface input data bus output [31:0] wb_dat_o; // WISHBONE interface output data bus input wb_ack_i; // Acknowledge input - qualifies valid data on data output bus or received data on data input bus input wb_rty_i; // retry input - signals from WISHBONE slave that cycle should be terminated and retried later input wb_err_i; // Signals from WISHBONE slave that access resulted in an error reg wb_cyc_o; reg wb_stb_o; reg wb_we_o; reg [2:0] wb_cti_o; reg [1:0] wb_bte_o; reg [3:0] wb_sel_o; reg [31:0] wb_dat_o; /*########################################################################################################### ///////////////////////////////////////////////////////////////////////////////////////////////////////////// LOGIC, COUNTERS, STATE MACHINE and some control register bits ============================================================= ///////////////////////////////////////////////////////////////////////////////////////////////////////////// ###########################################################################################################*/ reg last_data_transferred ; // signal is set by STATE MACHINE after each complete transfere ! // wire for write attempt - 1 when PCI Target attempt to write and PCIW_FIFO has a write transaction ready reg w_attempt; always@(posedge wb_clock_in or posedge reset_in) begin if (reset_in) w_attempt <= #`FF_DELAY 1'b0; else begin if (pciw_fifo_transaction_ready_in && ~pciw_fifo_empty_in) w_attempt <= #`FF_DELAY 1'b1; else if (last_data_transferred) w_attempt <= #`FF_DELAY 1'b0; end end // wire for read attempt - 1 when PCI Target is attempting a read and PCIR_FIFO is not full ! // because of transaction ordering, PCI Master must not start read untill all writes are done -> at that // moment PCIW_FIFO is empty !!! (when read is pending PCI Target will block new reads and writes) wire r_attempt = ( pci_tar_read_request && !w_attempt && pciw_fifo_empty_in ) ; // Signal is used for reads on WB, when there is retry! reg first_wb_data_access ; reg last_data_from_pciw_fifo ; // signal tells when there is last data in pciw_fifo reg last_data_from_pciw_fifo_reg ; reg last_data_to_pcir_fifo ; // signal tells when there will be last data for pcir_fifo // Logic used in State Machine logic implemented out of State Machine because of less delay! always@(posedge wb_clock_in or posedge reset_in) begin if (reset_in) last_data_from_pciw_fifo <= #`FF_DELAY 1'b0 ; else begin if ((pciw_fifo_renable_out) && (pciw_fifo_control_in[`LAST_CTRL_BIT] || pciw_fifo_almost_empty_in)) // if last data is going to be transfered last_data_from_pciw_fifo <= #`FF_DELAY 1'b1 ; // signal for last data from PCIW_FIFO else last_data_from_pciw_fifo <= #`FF_DELAY 1'b0 ; end end reg read_count_load; reg read_count_enable; reg [(`PCIR_ADDR_LENGTH - 1):0] max_read_count ; always@(pci_cache_line_size or cache_lsize_not_zero or pci_tar_cmd) begin if (cache_lsize_not_zero) if ( (pci_cache_line_size >= `PCIR_DEPTH) || (~pci_tar_cmd[1] && ~pci_tar_cmd[0]) ) // If cache line size is larger than FIFO or BC_MEM_READ_MUL command is performed! max_read_count = `PCIR_DEPTH - 1'b1; else max_read_count = pci_cache_line_size ; else max_read_count = 1'b1; end reg [(`PCIR_ADDR_LENGTH - 1):0] read_count ; // cache line bound indicator - it signals when data for one complete cacheline was read wire read_bound_comb = ~|( { read_count[(`PCIR_ADDR_LENGTH - 1):2], read_count[0] } ) ; reg read_bound ; always@(posedge wb_clock_in or posedge reset_in) begin if ( reset_in ) read_bound <= #`FF_DELAY 1'b0 ; else if (read_count_load) read_bound <= #`FF_DELAY 1'b0 ; else if ( read_count_enable ) read_bound <= #`FF_DELAY read_bound_comb ; end // down counter with load always@(posedge reset_in or posedge wb_clock_in) begin if (reset_in) read_count <= #`FF_DELAY 0 ; else if (read_count_load) read_count <= #`FF_DELAY max_read_count ; else if (read_count_enable) read_count <= #`FF_DELAY read_count - 1'b1 ; end // Logic used in State Machine logic implemented out of State Machine because of less delay! // definition of signal telling, when there is last data written into FIFO always@(pci_tar_cmd or pci_tar_burst_ok or read_bound) begin // burst is OK for reads when there is ((MEM_READ_LN or MEM_READ_MUL) and AD[1:0]==2'b00) OR // (MEM_READ and Prefetchable_IMAGE and AD[1:0]==2'b00) -> pci_tar_burst_ok case ({pci_tar_cmd, pci_tar_burst_ok}) {`BC_MEM_READ, 1'b1}, {`BC_MEM_READ_LN, 1'b1} : begin // when burst cycle if (read_bound) last_data_to_pcir_fifo = 1'b1 ; else last_data_to_pcir_fifo = 1'b0 ; end {`BC_MEM_READ_MUL, 1'b1} : begin // when burst cycle if (read_bound) last_data_to_pcir_fifo = 1'b1 ; else last_data_to_pcir_fifo = 1'b0 ; end default : // {`BC_IO_READ, 1'b0}, // {`BC_IO_READ, 1'b1}, // {`BC_MEM_READ, 1'b0}, // {`BC_MEM_READ_LN, 1'b0}, // {`BC_MEM_READ_MUL, 1'b0}: begin // when single cycle last_data_to_pcir_fifo = 1'b1 ; end endcase end reg wait_for_wb_response ; `ifdef PCI_WBM_NO_RESPONSE_CNT_DISABLE wire set_retry = 1'b0 ; `else reg [3:0] wb_no_response_cnt ; reg [3:0] wb_response_value ; reg set_retry ; // // internal WB no response retry generator counter! always@(posedge reset_in or posedge wb_clock_in) begin if (reset_in) wb_no_response_cnt <= #`FF_DELAY 4'h0 ; else wb_no_response_cnt <= #`FF_DELAY wb_response_value ; end // internal WB no response retry generator logic always@(wait_for_wb_response or wb_no_response_cnt) begin if (wb_no_response_cnt == 4'h8) // when there isn't response for 8 clocks, set internal retry begin wb_response_value = 4'h0 ; set_retry = 1'b1 ; end else begin if (wait_for_wb_response) wb_response_value = wb_no_response_cnt + 1'h1 ; // count clocks when no response else wb_response_value = 4'h0 ; set_retry = 1'b0 ; end end `endif wire retry = wb_rty_i || set_retry ; // retry signal - logic OR function between wb_rty_i and internal WB no response retry! reg [7:0] rty_counter ; // output from retry counter reg [7:0] rty_counter_in ; // input value - output value + 1 OR output value reg rty_counter_almost_max_value ; // signal tells when retry counter riches maximum value - 1! reg reset_rty_cnt ; // signal for asynchronous reset of retry counter after each complete transfere // sinchronous signal after each transfere and asynchronous signal 'reset_rty_cnt' after reset // for reseting the retry counter always@(posedge reset_in or posedge wb_clock_in) begin if (reset_in) reset_rty_cnt <= #`FF_DELAY 1'b1 ; // asynchronous set when reset signal is active else reset_rty_cnt <= #`FF_DELAY wb_ack_i || wb_err_i || last_data_transferred ; // synchronous set after completed transfere end // Retry counter register control always@(posedge reset_in or posedge wb_clock_in) begin if (reset_in) rty_counter <= #`FF_DELAY 8'h00 ; else begin if (reset_rty_cnt) rty_counter <= #`FF_DELAY 8'h00 ; else if (retry) rty_counter <= #`FF_DELAY rty_counter_in ; end end // Retry counter logic always@(rty_counter) begin if(rty_counter == `WB_RTY_CNT_MAX - 1'b1) // stop counting begin rty_counter_in = rty_counter ; rty_counter_almost_max_value = 1'b1 ; end else begin rty_counter_in = rty_counter + 1'b1 ; // count up rty_counter_almost_max_value = 1'b0 ; end end reg [31:0] addr_cnt_out ; // output value from address counter to WB ADDRESS output reg [31:0] addr_cnt_in ; // input address value to address counter reg addr_into_cnt ; // control signal for loading starting address into counter reg addr_into_cnt_reg ; reg addr_count ; // control signal for count enable reg [3:0] bc_register ; // used when error occures during writes! // wb address counter register control always@(posedge wb_clock_in or posedge reset_in) begin if (reset_in) // reset counter begin addr_cnt_out <= #`FF_DELAY 32'h0000_0000 ; bc_register <= #`FF_DELAY 4'h0 ; addr_into_cnt_reg <= #`FF_DELAY 1'b0; end else begin addr_cnt_out <= #`FF_DELAY addr_cnt_in ; // count up or hold value depending on cache line counter logic addr_into_cnt_reg <= #`FF_DELAY addr_into_cnt; if (addr_into_cnt) bc_register <= #`FF_DELAY pciw_fifo_cbe_in ; end end // when '1', the bus command is IO command - not supported commands are checked in pci_decoder modules wire io_memory_bus_command = !pci_tar_cmd[3] && !pci_tar_cmd[2] ; // wb address counter logic always@(addr_into_cnt or r_attempt or addr_count or pciw_fifo_addr_data_in or pci_tar_address or addr_cnt_out or io_memory_bus_command) begin if (addr_into_cnt) // load starting address into counter begin if (r_attempt) begin // if read request, then load read addresss from PCI Target addr_cnt_in = {pci_tar_address[31:2], pci_tar_address[1] && io_memory_bus_command, pci_tar_address[0] && io_memory_bus_command} ; end else begin // if not read request, then load write address from PCIW_FIFO addr_cnt_in = pciw_fifo_addr_data_in[31:0] ; end end else if (addr_count) begin addr_cnt_in = addr_cnt_out + 3'h4 ; // count up for 32-bit alligned address end else begin addr_cnt_in = addr_cnt_out ; end end reg retried ; // Signal is output value from FF and is set for one clock period after retried_d is set reg retried_d ; // Signal is set whenever cycle is retried and is input to FF for delaying -> used in S_IDLE state reg retried_write; reg rty_i_delayed; // Dignal used for determinig the source of retry! reg first_data_is_burst ; // Signal is set in S_WRITE or S_READ states, when data transfere is burst! reg first_data_is_burst_reg ; wire burst_transfer ; // This signal is set when data transfere is burst and is reset with RESET or last data transfered reg burst_chopped; // This signal is set when WB_SEL_O is changed during burst write transaction reg burst_chopped_delayed; // FFs output signals tell, when there is first data out from FIFO (for BURST checking) // and for delaying retried signal always@(posedge wb_clock_in or posedge reset_in) begin if (reset_in) // reset signals begin retried <= #`FF_DELAY 1'b0 ; retried_write <= #`FF_DELAY 1'b0 ; rty_i_delayed <= #`FF_DELAY 1'B0 ; end else begin retried <= #`FF_DELAY retried_d ; // delaying retried signal retried_write <= #`FF_DELAY retried ; rty_i_delayed <= #`FF_DELAY wb_rty_i ; end end // Determinig if first data is a part of BURST or just a single transfere! always@(addr_into_cnt or r_attempt or pci_tar_burst_ok or max_read_count or pciw_fifo_control_in or pciw_fifo_empty_in) begin if (addr_into_cnt) begin if (r_attempt) begin // burst is OK for reads when there is ((MEM_READ_LN or MEM_READ_MUL) and AD[1:0]==2'b00) OR // (MEM_READ and Prefetchable_IMAGE and AD[1:0]==2'b00) -> pci_tar_burst_ok if (pci_tar_burst_ok && (max_read_count != 8'h1)) first_data_is_burst = 1'b1 ; else first_data_is_burst = 1'b0 ; end else begin first_data_is_burst = 1'b0 ; end end else first_data_is_burst = pciw_fifo_control_in[`BURST_BIT] && ~pciw_fifo_empty_in && ~pciw_fifo_control_in[`LAST_CTRL_BIT] /*&& ~pciw_fifo_control_in[`DATA_ERROR_CTRL_BIT]*/; end // FF for seting and reseting burst_transfer signal always@(posedge wb_clock_in or posedge reset_in) begin if (reset_in) begin burst_chopped <= #`FF_DELAY 1'b0; burst_chopped_delayed <= #`FF_DELAY 1'b0; first_data_is_burst_reg <= #`FF_DELAY 1'b0 ; end else begin if (pciw_fifo_transaction_ready_in) begin if (pciw_fifo_control_in[`DATA_ERROR_CTRL_BIT]) burst_chopped <= #`FF_DELAY 1'b1; else if (wb_ack_i || wb_err_i || wb_rty_i) burst_chopped <= #`FF_DELAY 1'b0; end else burst_chopped <= #`FF_DELAY 1'b0; burst_chopped_delayed <= #`FF_DELAY burst_chopped; if (last_data_transferred || first_data_is_burst) first_data_is_burst_reg <= #`FF_DELAY ~last_data_transferred ; end end assign burst_transfer = first_data_is_burst || first_data_is_burst_reg ; reg [(`WB_FSM_BITS - 1):0] c_state ; //current state register reg [(`WB_FSM_BITS - 1):0] n_state ; //next state input to current state register //################################## // WISHBONE B3 master state machine //################################## // state machine register control and registered outputs (without wb_adr_o counter) always@(posedge wb_clock_in or posedge reset_in) begin if (reset_in) // reset state machine to S_IDLE state begin c_state <= #`FF_DELAY S_IDLE; wb_cyc_o <= #`FF_DELAY 1'b0; wb_stb_o <= #`FF_DELAY 1'b0; wb_we_o <= #`FF_DELAY 1'b0; wb_cti_o <= #`FF_DELAY 3'h2; wb_bte_o <= #`FF_DELAY 2'h0; wb_sel_o <= #`FF_DELAY 4'h0; wb_dat_o <= #`FF_DELAY 32'h0; pcir_fifo_data_out <= #`FF_DELAY 32'h0; pcir_fifo_control_out <= #`FF_DELAY 4'h0; pcir_fifo_wenable_out <= #`FF_DELAY 1'b0; end else begin c_state <= #`FF_DELAY n_state; wb_bte_o <= #`FF_DELAY 2'h0; case (n_state) // synthesis parallel_case full_case S_WRITE: begin wb_cyc_o <= #`FF_DELAY ~addr_into_cnt; wb_stb_o <= #`FF_DELAY ~addr_into_cnt; wb_we_o <= #`FF_DELAY ~addr_into_cnt; // if '1' then next burst BE is not equat to current one => burst is chopped into singles // OR if last data is going to be transfered if ((wb_stb_o && wb_ack_i) || addr_into_cnt_reg || (~wb_cyc_o && (retried || burst_chopped_delayed))) begin if (burst_transfer && ~pciw_fifo_control_in[`DATA_ERROR_CTRL_BIT] && ~(pciw_fifo_renable_out && (pciw_fifo_control_in[`LAST_CTRL_BIT] || pciw_fifo_almost_empty_in))) wb_cti_o <= #`FF_DELAY 3'h2; else wb_cti_o <= #`FF_DELAY 3'h7; end if ((pciw_fifo_renable_out && ~addr_into_cnt) || addr_into_cnt_reg) begin wb_sel_o <= #`FF_DELAY ~pciw_fifo_cbe_in; wb_dat_o <= #`FF_DELAY pciw_fifo_addr_data_in; end end S_WRITE_ERR_RTY: begin wb_cyc_o <= #`FF_DELAY 1'b0; wb_stb_o <= #`FF_DELAY 1'b0; wb_we_o <= #`FF_DELAY 1'b0; wb_cti_o <= #`FF_DELAY 3'h2; // stay the same as previous //wb_sel_o <= #`FF_DELAY 4'h0; //wb_dat_o <= #`FF_DELAY 32'h0; end S_READ: begin wb_cyc_o <= #`FF_DELAY ~addr_into_cnt; wb_stb_o <= #`FF_DELAY ~addr_into_cnt; wb_we_o <= #`FF_DELAY 1'b0; if ((wb_stb_o && wb_ack_i) || addr_into_cnt_reg || (~wb_cyc_o && retried)) begin if (burst_transfer && ~read_bound_comb) wb_cti_o <= #`FF_DELAY 3'h2; else wb_cti_o <= #`FF_DELAY 3'h7; end if (burst_transfer) wb_sel_o <= #`FF_DELAY 4'hF; else wb_sel_o <= #`FF_DELAY ~pci_tar_be; // no need to change att all //wb_dat_o <= #`FF_DELAY 32'h0; end S_READ_RTY: begin wb_cyc_o <= #`FF_DELAY 1'b0; wb_stb_o <= #`FF_DELAY 1'b0; wb_we_o <= #`FF_DELAY 1'b0; wb_cti_o <= #`FF_DELAY 3'h2; // no need to change att all //wb_sel_o <= #`FF_DELAY 4'h0; //wb_dat_o <= #`FF_DELAY 32'h0; end S_TURN_ARROUND: begin wb_cyc_o <= #`FF_DELAY 1'b0; wb_stb_o <= #`FF_DELAY 1'b0; wb_we_o <= #`FF_DELAY 1'b0; wb_cti_o <= #`FF_DELAY 3'h2; // no need to change att all //wb_sel_o <= #`FF_DELAY 4'h0; //wb_dat_o <= #`FF_DELAY 32'h0; end default: // S_IDLE: begin wb_cyc_o <= #`FF_DELAY 1'b0; wb_stb_o <= #`FF_DELAY 1'b0; wb_we_o <= #`FF_DELAY 1'b0; wb_cti_o <= #`FF_DELAY 3'h2; // no need to change att all //wb_sel_o <= #`FF_DELAY 4'h0; //wb_dat_o <= #`FF_DELAY 32'h0; end endcase pcir_fifo_data_out <= #`FF_DELAY wb_dat_i; pcir_fifo_control_out <= #`FF_DELAY pcir_fifo_control ; pcir_fifo_wenable_out <= #`FF_DELAY pcir_fifo_wenable ; end end assign wb_adr_o = addr_cnt_out ; // state machine logic always@(c_state or wb_ack_i or wb_rty_i or wb_err_i or w_attempt or r_attempt or retried or burst_chopped or burst_chopped_delayed or rty_i_delayed or pci_tar_read_request or rty_counter_almost_max_value or set_retry or last_data_to_pcir_fifo or first_wb_data_access or pciw_fifo_control_in or pciw_fifo_empty_in or burst_transfer or last_data_from_pciw_fifo_reg ) begin case (c_state) S_IDLE: begin // Default values for signals not used in this state pcir_fifo_wenable = 1'b0 ; pcir_fifo_control = 4'h0 ; addr_count = 1'b0 ; read_count_enable = 1'b0 ; pci_error_sig_out = 1'b0 ; error_source_out = 1'b0 ; retried_d = 1'b0 ; last_data_transferred = 1'b0 ; wb_read_done = 1'b0 ; wait_for_wb_response = 1'b0 ; write_rty_cnt_exp_out = 1'b0 ; pci_error_sig_out = 1'b0 ; read_rty_cnt_exp_out = 1'b0 ; case ({w_attempt, r_attempt, retried}) 3'b101 : // Write request for PCIW_FIFO to WB bus transaction begin // If there was retry, the same transaction must be initiated pciw_fifo_renable = 1'b0 ; // the same data addr_into_cnt = 1'b0 ; // the same address read_count_load = 1'b0 ; // no need for cache line when there is write n_state = S_WRITE ; end 3'b100 : // Write request for PCIW_FIFO to WB bus transaction begin // If there is new transaction if (burst_chopped_delayed) begin addr_into_cnt = 1'b0 ; // address must not be latched into address counter pciw_fifo_renable = 1'b1 ; // first location is address (in FIFO), next will be data end else begin if (pciw_fifo_control_in[`ADDR_CTRL_BIT]) addr_into_cnt = 1'b1 ; // address must be latched into address counter else addr_into_cnt = 1'b0 ; pciw_fifo_renable = 1'b1 ; // first location is address (in FIFO), next will be data end read_count_load = 1'b0 ; // no need for cache line when there is write n_state = S_WRITE ; end 3'b011 : // Read request from PCI Target for WB bus to PCIR_FIFO transaction begin // If there was retry, the same transaction must be initiated addr_into_cnt = 1'b0 ; // the same address read_count_load = 1'b0 ; // cache line counter must not be changed for retried read pciw_fifo_renable = 1'b0 ; // don't read from FIFO, when read transaction from WB to FIFO n_state = S_READ ; end 3'b010 : // Read request from PCI Target for WB bus to PCIR_FIFO transaction begin // If there is new transaction addr_into_cnt = 1'b1 ; // address must be latched into counter from separate request bus read_count_load = 1'b1 ; // cache line size must be latched into its counter pciw_fifo_renable = 1'b0 ; // don't read from FIFO, when read transaction from WB to FIFO n_state = S_READ ; end default : // stay in IDLE state begin pciw_fifo_renable = 1'b0 ; addr_into_cnt = 1'b0 ; read_count_load = 1'b0 ; n_state = S_IDLE ; end endcase end S_WRITE: // WRITE from PCIW_FIFO to WB bus begin // Default values for signals not used in this state pcir_fifo_wenable = 1'b0 ; pcir_fifo_control = 4'h0 ; addr_into_cnt = 1'b0 ; read_count_load = 1'b0 ; read_count_enable = 1'b0 ; wb_read_done = 1'b0 ; read_rty_cnt_exp_out = 1'b0 ; case ({wb_ack_i, wb_err_i, wb_rty_i}) 3'b100 : // If writting of one data is acknowledged begin addr_count = 1'b1 ; // prepare next address if there will be burst retried_d = 1'b0 ; // there was no retry pci_error_sig_out = 1'b0 ; // there was no error error_source_out = 1'b0 ; write_rty_cnt_exp_out = 1'b0 ; // there was no retry wait_for_wb_response = 1'b0 ; // if last data was transfered ! if (last_data_from_pciw_fifo_reg) begin n_state = S_TURN_ARROUND; if (~pciw_fifo_empty_in) pciw_fifo_renable = 1'b0 ; // prepare next value (address when new trans., data when burst tran.) else pciw_fifo_renable = 1'b0 ; last_data_transferred = 1'b1 ; // signal for last data transfered end // next burst data has different byte enables ! else if (burst_transfer && burst_chopped) begin n_state = S_IDLE ; pciw_fifo_renable = 1'b0 ; // next value (address when new trans., data when burst tran.) last_data_transferred = 1'b0 ; end else begin n_state = S_WRITE ; pciw_fifo_renable = 1'b1 ; // prepare next value (address when new trans., data when burst tran.) last_data_transferred = 1'b0 ; end end 3'b010 : // If writting of one data is terminated with ERROR begin if (~pciw_fifo_empty_in) pciw_fifo_renable = 1'b1 ; // prepare next value (address when new trans., data when cleaning FIFO) else pciw_fifo_renable = 1'b0 ; addr_count = 1'b0 ; // no need for new address retried_d = 1'b0 ; // there was no retry last_data_transferred = 1'b1 ; // signal for last data transfered pci_error_sig_out = 1'b1 ; // segnal for error reporting error_source_out = 1'b0 ; // error source from other side of WB bus write_rty_cnt_exp_out = 1'b0 ; // there was no retry wait_for_wb_response = 1'b0 ; if (last_data_from_pciw_fifo_reg) // if last data was transfered n_state = S_TURN_ARROUND ; // go to S_TURN_ARROUND for new transfere else // if there wasn't last data of transfere n_state = S_WRITE_ERR_RTY ; // go here to clean this write transaction from PCIW_FIFO end 3'b001 : // If writting of one data is retried begin addr_count = 1'b0 ; last_data_transferred = 1'b0 ; retried_d = 1'b1 ; // there was a retry wait_for_wb_response = 1'b0 ; if(rty_counter_almost_max_value) // If retry counter reached maximum allowed value begin if (last_data_from_pciw_fifo_reg) // if last data was transfered pciw_fifo_renable = 1'b0 ; else // if there wasn't last data of transfere pciw_fifo_renable = 1'b1 ; n_state = S_WRITE_ERR_RTY ; // go here to clean this write transaction from PCIW_FIFO write_rty_cnt_exp_out = 1'b1 ; // signal for reporting write counter expired pci_error_sig_out = 1'b1 ; error_source_out = 1'b1 ; // error ocuerd because of retry counter end else begin pciw_fifo_renable = 1'b0 ; n_state = S_IDLE ; // go to S_IDLE state for retrying the transaction write_rty_cnt_exp_out = 1'b0 ; // retry counter hasn't expired yet pci_error_sig_out = 1'b0 ; error_source_out = 1'b0 ; end end default : begin addr_count = 1'b0 ; last_data_transferred = 1'b0 ; wait_for_wb_response = 1'b1 ; // wait for WB device to response (after 8 clocks RTY CNT is incremented) error_source_out = 1'b0 ; // if error ocures, error source is from other WB bus side if((rty_counter_almost_max_value)&&(set_retry)) // when no WB response and RTY CNT reached maximum allowed value begin retried_d = 1'b1 ; if (last_data_from_pciw_fifo_reg) // if last data was transfered pciw_fifo_renable = 1'b0 ; else // if there wasn't last data of transfere pciw_fifo_renable = 1'b1 ; n_state = S_WRITE_ERR_RTY ; // go here to clean this write transaction from PCIW_FIFO write_rty_cnt_exp_out = 1'b1 ; // signal for reporting write counter expired pci_error_sig_out = 1'b1 ; // signal for error reporting end else begin pciw_fifo_renable = 1'b0 ; retried_d = 1'b0 ; n_state = S_WRITE ; // stay in S_WRITE state to wait WB to response write_rty_cnt_exp_out = 1'b0 ; // retry counter hasn't expired yet pci_error_sig_out = 1'b0 ; end end endcase end S_WRITE_ERR_RTY: // Clean current write transaction from PCIW_FIFO if ERROR or Retry counter expired occures begin pciw_fifo_renable = !last_data_from_pciw_fifo_reg ; // put out next data (untill last data or FIFO empty) last_data_transferred = 1'b1 ; // after exiting this state, negedge of this signal is used // Default values for signals not used in this state pcir_fifo_wenable = 1'b0 ; pcir_fifo_control = 4'h0 ; addr_into_cnt = 1'b0 ; read_count_load = 1'b0 ; read_count_enable = 1'b0 ; addr_count = 1'b0 ; pci_error_sig_out = 1'b0 ; error_source_out = 1'b0 ; retried_d = 1'b0 ; wb_read_done = 1'b0 ; write_rty_cnt_exp_out = 1'b0 ; read_rty_cnt_exp_out = 1'b0 ; wait_for_wb_response = 1'b0 ; // If last data is cleaned out from PCIW_FIFO if (last_data_from_pciw_fifo_reg) n_state = S_IDLE ; else n_state = S_WRITE_ERR_RTY ; // Clean until last data is cleaned out from FIFO end S_READ: // READ from WB bus to PCIR_FIFO begin // Default values for signals not used in this state pciw_fifo_renable = 1'b0 ; addr_into_cnt = 1'b0 ; read_count_load = 1'b0 ; pci_error_sig_out = 1'b0 ; error_source_out = 1'b0 ; write_rty_cnt_exp_out = 1'b0 ; case ({wb_ack_i, wb_err_i, wb_rty_i}) 3'b100 : // If reading of one data is acknowledged begin pcir_fifo_wenable = 1'b1 ; // enable writting data into PCIR_FIFO addr_count = 1'b1 ; // prepare next address if there will be burst read_count_enable = 1'b1 ; // decrease counter value for cache line size retried_d = 1'b0 ; // there was no retry read_rty_cnt_exp_out = 1'b0 ; // there was no retry wait_for_wb_response = 1'b0 ; // if last data was transfered if (last_data_to_pcir_fifo) begin pcir_fifo_control[`LAST_CTRL_BIT] = 1'b1 ; // FIFO must indicate LAST data transfered pcir_fifo_control[`DATA_ERROR_CTRL_BIT] = 1'b0 ; pcir_fifo_control[`UNUSED_CTRL_BIT] = 1'b0 ; pcir_fifo_control[`ADDR_CTRL_BIT] = 1'b0 ; last_data_transferred = 1'b1 ; // signal for last data transfered wb_read_done = 1'b1 ; // signal last data of read transaction for PCI Target n_state = S_TURN_ARROUND ; end else // if not last data transfered begin pcir_fifo_control = 4'h0 ; // ZERO for control code last_data_transferred = 1'b0 ; // not last data transfered wb_read_done = 1'b0 ; // read is not done yet n_state = S_READ ; end end 3'b010 : // If reading of one data is terminated with ERROR begin pcir_fifo_wenable = 1'b1 ; // enable for writting to FIFO data with ERROR addr_count = 1'b0 ; // no need for new address pcir_fifo_control[`LAST_CTRL_BIT] = 1'b0 ; pcir_fifo_control[`DATA_ERROR_CTRL_BIT] = 1'b1 ; // FIFO must indicate the DATA with ERROR pcir_fifo_control[`UNUSED_CTRL_BIT] = 1'b0 ; pcir_fifo_control[`ADDR_CTRL_BIT] = 1'b0 ; last_data_transferred = 1'b1 ; // signal for last data transfered wb_read_done = 1'b1 ; // signal last data of read transaction for PCI Target read_count_enable = 1'b0 ; // no need for cache line, when error occures n_state = S_TURN_ARROUND ; retried_d = 1'b0 ; // there was no retry wait_for_wb_response = 1'b0 ; read_rty_cnt_exp_out = 1'b0 ; // there was no retry end 3'b001 : // If reading of one data is retried begin pcir_fifo_wenable = 1'b0 ; pcir_fifo_control = 4'h0 ; addr_count = 1'b0 ; read_count_enable = 1'b0 ; wait_for_wb_response = 1'b0 ; case ({first_wb_data_access, rty_counter_almost_max_value}) 2'b10 : begin // if first data of the cycle (CYC_O) is retried - after each retry CYC_O goes inactive n_state = S_IDLE ; // go to S_IDLE state for retrying the transaction read_rty_cnt_exp_out = 1'b0 ; // retry counter hasn't expired yet last_data_transferred = 1'b0 ; wb_read_done = 1'b0 ; retried_d = 1'b1 ; // there was a retry end 2'b11 : begin // if retry counter reached maximum value n_state = S_READ_RTY ; // go here to wait for PCI Target to remove read request read_rty_cnt_exp_out = 1'b1 ; // signal for reporting read counter expired last_data_transferred = 1'b0 ; wb_read_done = 1'b0 ; retried_d = 1'b1 ; // there was a retry end default : // if retry occures after at least 1 data was transferred without breaking cycle (CYC_O inactive) begin // then PCI device will retry access! n_state = S_TURN_ARROUND ; // go to S_TURN_ARROUND state read_rty_cnt_exp_out = 1'b0 ; // retry counter hasn't expired last_data_transferred = 1'b1 ; wb_read_done = 1'b1 ; retried_d = 1'b0 ; // retry must not be retried, since there is not a first data end endcase end default : begin addr_count = 1'b0 ; read_count_enable = 1'b0 ; read_rty_cnt_exp_out = 1'b0 ; wait_for_wb_response = 1'b1 ; // wait for WB device to response (after 8 clocks RTY CNT is incremented) if((rty_counter_almost_max_value)&&(set_retry)) // when no WB response and RTY CNT reached maximum allowed value begin retried_d = 1'b1 ; n_state = S_TURN_ARROUND ; // go here to stop read request pcir_fifo_wenable = 1'b1 ; pcir_fifo_control[`LAST_CTRL_BIT] = 1'b0 ; pcir_fifo_control[`DATA_ERROR_CTRL_BIT] = 1'b1 ; // FIFO must indicate the DATA with ERROR pcir_fifo_control[`UNUSED_CTRL_BIT] = 1'b0 ; pcir_fifo_control[`ADDR_CTRL_BIT] = 1'b0 ; last_data_transferred = 1'b1 ; wb_read_done = 1'b1 ; end else begin retried_d = 1'b0 ; n_state = S_READ ; // stay in S_READ state to wait WB to response pcir_fifo_wenable = 1'b0 ; pcir_fifo_control = 4'h0 ; last_data_transferred = 1'b0 ; wb_read_done = 1'b0 ; end end endcase end S_READ_RTY: // Wait for PCI Target to remove read request, when retry counter reaches maximum value! begin // Default values for signals not used in this state pciw_fifo_renable = 1'b0 ; pcir_fifo_wenable = 1'b0 ; pcir_fifo_control = 4'h0 ; addr_into_cnt = 1'b0 ; read_count_load = 1'b0 ; read_count_enable = 1'b0 ; addr_count = 1'b0 ; pci_error_sig_out = 1'b0 ; error_source_out = 1'b0 ; retried_d = 1'b0 ; wb_read_done = 1'b0 ; write_rty_cnt_exp_out = 1'b0 ; read_rty_cnt_exp_out = 1'b0 ; wait_for_wb_response = 1'b0 ; // wait for PCI Target to remove read request if (pci_tar_read_request) begin n_state = S_READ_RTY ; // stay in this state until read request is removed last_data_transferred = 1'b0 ; end else // when read request is removed begin n_state = S_IDLE ; last_data_transferred = 1'b1 ; // when read request is removed, there is "last" data end end // Turn arround cycle after writting to PCIR_FIFO (for correct data when reading from PCIW_FIFO) default: // S_TURN_ARROUND: begin // Default values for signals not used in this state pciw_fifo_renable = 1'b0 ; pcir_fifo_wenable = 1'b0 ; pcir_fifo_control = 4'h0 ; addr_into_cnt = 1'b0 ; read_count_load = 1'b0 ; read_count_enable = 1'b0 ; addr_count = 1'b0 ; pci_error_sig_out = 1'b0 ; error_source_out = 1'b0 ; retried_d = 1'b0 ; last_data_transferred = 1'b1 ; wb_read_done = 1'b0 ; write_rty_cnt_exp_out = 1'b0 ; read_rty_cnt_exp_out = 1'b0 ; wait_for_wb_response = 1'b0 ; n_state = S_IDLE ; end endcase end // Signal for retry monitor in state machine when there is read and first (or single) data access wire ack_rty_response = wb_ack_i || wb_rty_i ; // Signal first_wb_data_access is set when no WB cycle present till end of first data access of WB cycle on WB bus always@(posedge wb_clock_in or posedge reset_in) begin if (reset_in) first_wb_data_access = 1'b1 ; else begin if (~wb_cyc_o) first_wb_data_access = 1'b1 ; else if (ack_rty_response) first_wb_data_access = 1'b0 ; end end // Signals to FIFO assign pcir_fifo_be_out = 4'hf ; // pci_tar_be ; // Signals to Conf. space assign pci_error_bc = bc_register ; always@(posedge wb_clock_in or posedge reset_in) begin if (reset_in) wb_read_done_out <= #`FF_DELAY 1'b0 ; else wb_read_done_out <= #`FF_DELAY wb_read_done ; end always@(pciw_fifo_renable or addr_into_cnt_reg or pciw_fifo_control_in or pciw_fifo_empty_in) begin pciw_fifo_renable_out = pciw_fifo_renable || addr_into_cnt_reg ; last_data_from_pciw_fifo_reg = pciw_fifo_control_in[`ADDR_CTRL_BIT] || pciw_fifo_empty_in ; end endmodule