# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
# Configuration file for running experiments
# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
# timeout_each_job : FPGA Task script splits fpga flow into multiple jobs
# Each job execute fpga_flow script on combination of architecture & benchmark
# timeout_each_job is timeout for each job
# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

[GENERAL]
run_engine=openfpga_shell
power_tech_file = ${PATH:OPENFPGA_PATH}/openfpga_flow/tech/PTM_45nm/45nm.xml
power_analysis = false
spice_output=false
verilog_output=true
timeout_each_job = 20*60
fpga_flow=yosys_vpr

[OpenFPGA_SHELL]
openfpga_shell_template=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_shell_scripts/iwls_benchmark_example_script.openfpga
openfpga_arch_file=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_arch/k6_frac_N10_adder_chain_dpram8K_dsp36_fracff_40nm_openfpga.xml
openfpga_sim_setting_file=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_simulation_settings/fixed_sim_openfpga.xml
# VPR parameters
# Use a fixed routing channel width to save runtime
vpr_route_chan_width=300
openfpga_vpr_pack_stats_file=vpr_pack_block_usage.txt

[ARCHITECTURES]
arch0=${PATH:OPENFPGA_PATH}/openfpga_flow/vpr_arch/k6_frac_N10_tileable_adder_chain_dpram8K_dsp36_fracff_40nm.xml

[BENCHMARKS]
# RTL netlists from IWLS 2005 benchmark release
# Comment out it requires falling edge latches which are not supported yet
#bench0=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/ac97_ctrl/rtl/*.v
bench1=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/ethernet/rtl/*.v
bench2=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/mem_ctrl/rtl/*.v
bench3=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/simple_spi/rtl/*.v
# Comment out due to VHDL is not supported by Yosys without Verific
#bench4=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/steppermotordrive/rtl/*.vhd
bench5=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/tv80/rtl/*.v
bench6=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/vga_lcd/rtl/*.v
# AES core has two top modules that can be tested: encryption and decryption
# Synthesis is too long; skip it
bench7=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/aes_core/rtl/*.v
bench8=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/aes_core/rtl/*.v
bench9=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/fpu/rtl/*.v
bench10=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/pci/rtl/*.v
bench11=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/spi/rtl/*.v
bench12=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/systemcaes/rtl/*.v
bench13=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/usb_funct/rtl/*.v
bench14=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/wb_conmax/rtl/*.v
## DES has two versions: area-optimized and performance optimized
# The DES has same top-level module name as systemcdes
# Currently openfpga flow has a bug which does not allow same top-level module name 
#bench15=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/des/area_opt/rtl/*.v
#bench16=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/des/perf_opt/rtl/*.v
bench17=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/i2c/rtl/*.v
bench18=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/sasc/rtl/*.v
bench19=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/ss_pcm/rtl/*.v
bench20=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/systemcdes/rtl/*.v
bench21=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/usb_phy/rtl/*.v
bench22=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/iwls2005/wb_dma/rtl/*.v

[SYNTHESIS_PARAM]
# Yosys script parameters
bench_yosys_cell_sim_verilog_common=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_yosys_techlib/k6_frac_N10_tileable_adder_chain_dpram8K_dsp36_fracff_40nm_cell_sim.v
bench_yosys_dff_map_verilog_common=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_yosys_techlib/k6_frac_N10_tileable_adder_chain_dpram8K_dsp36_fracff_40nm_dff_map.v
bench_yosys_bram_map_rules_common=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_yosys_techlib/k6_frac_N10_tileable_adder_chain_dpram8K_dsp36_40nm_bram.txt
bench_yosys_bram_map_verilog_common=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_yosys_techlib/k6_frac_N10_tileable_adder_chain_dpram8K_dsp36_40nm_bram_map.v
bench_yosys_dsp_map_verilog_common=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_yosys_techlib/k6_frac_N10_tileable_adder_chain_dpram8K_dsp36_40nm_dsp_map.v
bench_yosys_dsp_map_parameters_common=-D DSP_A_MAXWIDTH=36 -D DSP_B_MAXWIDTH=36 -D DSP_A_MINWIDTH=2 -D DSP_B_MINWIDTH=2 -D DSP_NAME=mult_36x36
bench_read_verilog_options_common = -nolatches
bench_yosys_common=${PATH:OPENFPGA_PATH}/openfpga_flow/misc/ys_tmpl_yosys_vpr_bram_dsp_dff_flow.ys
bench0_top = ac97_top
bench1_top = eth_top
bench2_top = mc_top
bench3_top = simple_spi_top
bench4_top = StepperMotorPorts
bench5_top = tv80s
bench6_top = vga_enh_top
bench7_top = aes_cipher_top
bench8_top = aes_inv_cipher_top
bench9_top = fpu
bench10_top = pci_bridge32
bench11_top = spi_top
bench12_top = aes
bench13_top = usbf_top
bench14_top = wb_conmax_top
# Not sure either des or des3 is the top module. Need further investigation
bench15_top = des
bench16_top = des3
bench17_top = i2c_master_top
bench18_top = sasc_top
bench19_top = pcm_slv_top
# May conflict with the top module name with other 'des' benchmark; This is a bug of openfpga flow scripts
bench20_top = des
bench21_top = usb_phy
bench22_top = wb_dma_top

[SCRIPT_PARAM_MIN_ROUTE_CHAN_WIDTH]
#end_flow_with_test=
#vpr_fpga_verilog_formal_verification_top_netlist=