diff --git a/vpr7_x2p/vpr/SRC/fpga_x2p/verilog/verilog_pbtypes.c b/vpr7_x2p/vpr/SRC/fpga_x2p/verilog/verilog_pbtypes.c index e3bdbf332..ea01fc03e 100644 --- a/vpr7_x2p/vpr/SRC/fpga_x2p/verilog/verilog_pbtypes.c +++ b/vpr7_x2p/vpr/SRC/fpga_x2p/verilog/verilog_pbtypes.c @@ -1767,9 +1767,11 @@ void dump_verilog_phy_pb_graph_node_rec(t_sram_orgz_info* cur_sram_orgz_info, /* Definition ends*/ /* Local wires for memory configurations */ - dump_verilog_sram_config_bus_internal_wires(fp, cur_sram_orgz_info, + if (0 < num_conf_bits) { + dump_verilog_sram_config_bus_internal_wires(fp, cur_sram_orgz_info, stamped_sram_cnt, stamped_sram_cnt + num_conf_bits - 1); + } /* Quote all child pb_types */ for (ipb = 0; ipb < cur_pb_type->modes[mode_index].num_pb_type_children; ipb++) { diff --git a/vpr7_x2p/vpr/SRC/fpga_x2p/verilog/verilog_report_timing.c b/vpr7_x2p/vpr/SRC/fpga_x2p/verilog/verilog_report_timing.c index 5ce58e834..2d215d872 100644 --- a/vpr7_x2p/vpr/SRC/fpga_x2p/verilog/verilog_report_timing.c +++ b/vpr7_x2p/vpr/SRC/fpga_x2p/verilog/verilog_report_timing.c @@ -1102,15 +1102,14 @@ void dump_verilog_one_sb_wire_segemental_report_timing(FILE* fp, fprintf(fp, "# L%d wire, Path ID: %d\n", L_wire, path_cnt); - /* Report timing for the SB MUX delay, from the drive_rr_node to the wire_rr_node */ - verilog_generate_one_report_timing_within_sb(fp, src_sb_info, - drive_rr_node, - src_rr_node); - if (NULL != rpt_name) { - fprintf(fp, " > %s\n", rpt_name); - } else { - fprintf(fp, "\n"); - } + + fprintf(fp, "report_timing -from "); + + /* output instance name */ + fprintf(fp, "%s/", + gen_verilog_one_sb_instance_name(src_sb_info)); + /* Find which side the ending pin locates, and determine the coordinate */ + dump_verilog_one_sb_routing_pin(fp, src_sb_info, drive_rr_node); /* Switch depends on the type of des_rr_node */ switch(des_rr_node->type) { @@ -1230,18 +1229,34 @@ void dump_verilog_one_sb_wire_segemental_report_timing(FILE* fp, for (ix = src_sb_info->x; ix < end_sb_x; ix++) { /* If this is the ending point, we add a ending segment */ if (ix == end_sb_x - 1) { - verilog_generate_report_timing_one_sb_ending_segments(fp, - &(sb_info[ix][cur_sb_y]), src_rr_node, - des_rr_node, - rpt_name); + switch (des_rr_node->type) { + case IPIN: + /* Get the coordinate of ending CB */ + next_cb = get_chan_rr_node_ending_cb(src_rr_node, des_rr_node); + fprintf(fp, " -to "); + fprintf(fp, "%s/", + gen_verilog_one_cb_instance_name(next_cb)); + /* output pin name */ + fprintf(fp, "%s", + gen_verilog_routing_channel_one_midout_name( next_cb, + src_rr_node->ptc_num)); + fprintf(fp, " -point_to_point"); + fprintf(fp, " -unconstrained"); + break; + case CHANX: + case CHANY: + /* Get the coordinate of ending SB */ + next_sb = get_chan_rr_node_ending_sb(src_rr_node, des_rr_node); + fprintf(fp, " -to "); + fprintf(fp, "%s/", + gen_verilog_one_sb_instance_name(next_sb)); + /* Find which side the ending pin locates, and determine the coordinate */ + dump_verilog_one_sb_chan_pin(fp, next_sb, src_rr_node, IN_PORT); - continue; + fprintf(fp, " -point_to_point"); + fprintf(fp, " -unconstrained"); + } } - /* Report timing for the downstream segements, from a SB output to an adjacent CB input */ - verilog_generate_report_timing_one_sb_thru_segments(fp, - &(sb_info[ix][cur_sb_y]), src_rr_node, - &(sb_info[ix + 1][cur_sb_y]), src_rr_node, - rpt_name); } } else if ((INC_DIRECTION == src_rr_node->direction) &&(CHANY == src_rr_node->type)) { @@ -1249,17 +1264,34 @@ void dump_verilog_one_sb_wire_segemental_report_timing(FILE* fp, for (iy = src_sb_info->y; iy < end_sb_y; iy++) { /* If this is the ending point, we add a ending segment */ if (iy == end_sb_y - 1) { - verilog_generate_report_timing_one_sb_ending_segments(fp, - &(sb_info[cur_sb_x][iy]), src_rr_node, - des_rr_node, - rpt_name); - continue; + switch (des_rr_node->type) { + case IPIN: + /* Get the coordinate of ending CB */ + next_cb = get_chan_rr_node_ending_cb(src_rr_node, des_rr_node); + fprintf(fp, " -to "); + fprintf(fp, "%s/", + gen_verilog_one_cb_instance_name(next_cb)); + /* output pin name */ + fprintf(fp, "%s", + gen_verilog_routing_channel_one_midout_name( next_cb, + src_rr_node->ptc_num)); + fprintf(fp, " -point_to_point"); + fprintf(fp, " -unconstrained"); + break; + case CHANX: + case CHANY: + /* Get the coordinate of ending SB */ + next_sb = get_chan_rr_node_ending_sb(src_rr_node, des_rr_node); + fprintf(fp, " -to "); + fprintf(fp, "%s/", + gen_verilog_one_sb_instance_name(next_sb)); + /* Find which side the ending pin locates, and determine the coordinate */ + dump_verilog_one_sb_chan_pin(fp, next_sb, src_rr_node, IN_PORT); + + fprintf(fp, " -point_to_point"); + fprintf(fp, " -unconstrained"); + } } - /* Report timing for the downstream segements, from a SB output to an adjacent CB input */ - verilog_generate_report_timing_one_sb_thru_segments(fp, - &(sb_info[cur_sb_x][iy]), src_rr_node, - &(sb_info[cur_sb_x][iy + 1]), src_rr_node, - rpt_name); } } else if ((DEC_DIRECTION == src_rr_node->direction) &&(CHANX == src_rr_node->type)) { @@ -1267,17 +1299,34 @@ void dump_verilog_one_sb_wire_segemental_report_timing(FILE* fp, for (ix = src_sb_info->x - 1; ix > end_sb_x; ix--) { /* If this is the ending point, we add a ending segment */ if (ix == end_sb_x + 1) { - verilog_generate_report_timing_one_sb_ending_segments(fp, - &(sb_info[ix][cur_sb_y]), src_rr_node, - des_rr_node, - rpt_name); - continue; + switch (des_rr_node->type) { + case IPIN: + /* Get the coordinate of ending CB */ + next_cb = get_chan_rr_node_ending_cb(src_rr_node, des_rr_node); + fprintf(fp, " -to "); + fprintf(fp, "%s/", + gen_verilog_one_cb_instance_name(next_cb)); + /* output pin name */ + fprintf(fp, "%s", + gen_verilog_routing_channel_one_midout_name( next_cb, + src_rr_node->ptc_num)); + fprintf(fp, " -point_to_point"); + fprintf(fp, " -unconstrained"); + break; + case CHANX: + case CHANY: + /* Get the coordinate of ending SB */ + next_sb = get_chan_rr_node_ending_sb(src_rr_node, des_rr_node); + fprintf(fp, " -to "); + fprintf(fp, "%s/", + gen_verilog_one_sb_instance_name(next_sb)); + /* Find which side the ending pin locates, and determine the coordinate */ + dump_verilog_one_sb_chan_pin(fp, next_sb, src_rr_node, IN_PORT); + + fprintf(fp, " -point_to_point"); + fprintf(fp, " -unconstrained"); + } } - /* Report timing for the downstream segements, from a SB output to an adjacent CB input */ - verilog_generate_report_timing_one_sb_thru_segments(fp, - &(sb_info[ix][cur_sb_y]), src_rr_node, - &(sb_info[ix - 1][cur_sb_y]), src_rr_node, - rpt_name); } } else if ((DEC_DIRECTION == src_rr_node->direction) &&(CHANY == src_rr_node->type)) { @@ -1285,26 +1334,559 @@ void dump_verilog_one_sb_wire_segemental_report_timing(FILE* fp, for (iy = src_sb_info->y - 1; iy > end_sb_y; iy--) { /* If this is the ending point, we add a ending segment */ if (iy == end_sb_y + 1) { - verilog_generate_report_timing_one_sb_ending_segments(fp, - &(sb_info[cur_sb_x][iy]), src_rr_node, - des_rr_node, - rpt_name); - continue; + switch (des_rr_node->type) { + case IPIN: + /* Get the coordinate of ending CB */ + next_cb = get_chan_rr_node_ending_cb(src_rr_node, des_rr_node); + fprintf(fp, " -to "); + fprintf(fp, "%s/", + gen_verilog_one_cb_instance_name(next_cb)); + /* output pin name */ + fprintf(fp, "%s", + gen_verilog_routing_channel_one_midout_name( next_cb, + src_rr_node->ptc_num)); + fprintf(fp, " -point_to_point"); + fprintf(fp, " -unconstrained"); + break; + case CHANX: + case CHANY: + /* Get the coordinate of ending SB */ + next_sb = get_chan_rr_node_ending_sb(src_rr_node, des_rr_node); + fprintf(fp, " -to "); + fprintf(fp, "%s/", + gen_verilog_one_sb_instance_name(next_sb)); + /* Find which side the ending pin locates, and determine the coordinate */ + dump_verilog_one_sb_chan_pin(fp, next_sb, src_rr_node, IN_PORT); + + fprintf(fp, " -point_to_point"); + fprintf(fp, " -unconstrained"); + } } - /* Report timing for the downstream segements, from a SB output to an adjacent CB input */ - verilog_generate_report_timing_one_sb_thru_segments(fp, - &(sb_info[cur_sb_x][iy]), src_rr_node, - &(sb_info[cur_sb_x][iy - 1]), src_rr_node, - rpt_name); } } + if (NULL != rpt_name) { + fprintf(fp, " > %s\n", rpt_name); + } else { + fprintf(fp, "\n"); + } + /* Free */ my_free(rpt_name); return; } +///* Print the pins of SBs that a routing wire will go through +// * from the src_rr_node to the des_rr_node +// */ +//static +//void dump_verilog_one_sb_wire_segemental_report_timing(FILE* fp, +// t_syn_verilog_opts fpga_verilog_opts, +// const RRGSB& src_sb, +// t_rr_node* drive_rr_node, +// t_rr_node* src_rr_node, +// t_rr_node* des_rr_node, +// int path_cnt) { +// int L_wire; +// int cur_sb_x, cur_sb_y; +// int end_sb_x, end_sb_y; +// t_cb* next_cb = NULL; +// char* rpt_name = NULL; +// DeviceCoordinator next_sb_coordinator; +// RRGSB next_sb; +// +// /* Check the file handler */ +// if (NULL == fp) { +// vpr_printf(TIO_MESSAGE_ERROR, +// "(FILE:%s,LINE[%d])Invalid file handler for SDC generation", +// __FILE__, __LINE__); +// exit(1); +// } +// +// /* Check */ +// assert ((INC_DIRECTION == src_rr_node->direction) +// ||(DEC_DIRECTION == src_rr_node->direction)); +// assert ((CHANX == src_rr_node->type) +// ||(CHANY == src_rr_node->type)); +// +// L_wire = get_rr_node_wire_length(src_rr_node); +// +// /* Get report name */ +// rpt_name = gen_verilog_one_routing_report_timing_rpt_name(fpga_verilog_opts.report_timing_path, +// L_wire, path_cnt); +// +// /* Start printing report timing info */ +// fprintf(fp, "# L%d wire, Path ID: %d\n", +// L_wire, +// path_cnt); +// /* Report timing for the SB MUX delay, from the drive_rr_node to the wire_rr_node */ +// verilog_generate_one_report_timing_within_sb(fp, src_sb, +// drive_rr_node, +// src_rr_node); +// if (NULL != rpt_name) { +// fprintf(fp, " > %s\n", rpt_name); +// } else { +// fprintf(fp, "\n"); +// } +// +// /* Switch depends on the type of des_rr_node */ +// switch(des_rr_node->type) { +// /* Range of SBs that on the path +// * --------- +// * | | +// * | des_sb | +// * | [x][y] | +// * --------- +// * /|\ +// * | +// * --------- +// * | | +// * | thru_cb | +// * | | +// * --------- +// * /|\ +// * | +// * -------- ------- --------- ------- -------- +// * | | | | | | | | | | +// * | des_sb |<---|thru_cb|<---| src_sb |--->|thru_cb|--->| des_sb | +// * |[x-1][y]| | [x][y]| | | | [x][y]| |[x][y] | +// * -------- ------- --------- ------- -------- +// * | +// * \|/ +// * --------- +// * | | +// * | thru_cb | +// * | | +// * --------- +// * | +// * \|/ +// * --------- +// * | | +// * | des_sb | +// * | [x][y-1]| +// * --------- +// */ +// case IPIN: +// /* Get the coordinate of ending CB */ +// next_cb = get_chan_rr_node_ending_cb(src_rr_node, des_rr_node); +// assert(next_cb->type == src_rr_node->type); +// /* 4 cases: */ +// if ((INC_DIRECTION == src_rr_node->direction) +// &&(CHANX == src_rr_node->type)) { +// end_sb_x = next_cb->x; +// end_sb_y = next_cb->y; +// } else if ((INC_DIRECTION == src_rr_node->direction) +// &&(CHANY == src_rr_node->type)) { +// end_sb_x = next_cb->x; +// end_sb_y = next_cb->y; +// } else if ((DEC_DIRECTION == src_rr_node->direction) +// &&(CHANX == src_rr_node->type)) { +// end_sb_x = next_cb->x - 1; +// end_sb_y = next_cb->y; +// } else if ((DEC_DIRECTION == src_rr_node->direction) +// &&(CHANY == src_rr_node->type)) { +// end_sb_x = next_cb->x; +// end_sb_y = next_cb->y - 1; +// } +// break; +// /* Range of SBs that on the path +// * --------- +// * | | +// * | des_sb | +// * | [x][y+1]| +// * --------- +// * /|\ +// * | +// * --------- +// * | | +// * | thru_sb | +// * | | +// * --------- +// * /|\ +// * | +// * -------- ------- --------- ------- -------- +// * | | | | | | | | | | +// * | des_sb |<---|thru_sb|<---| src_sb |--->|thru_sb|--->| des_sb | +// * |[x-1][y]| | [x][y]| | | | [x][y]| |[x+1][y]| +// * -------- ------- --------- ------- -------- +// * | +// * \|/ +// * --------- +// * | | +// * | thru_sb | +// * | | +// * --------- +// * | +// * \|/ +// * --------- +// * | | +// * | des_sb | +// * | [x][y-1]| +// * --------- +// */ +// case CHANX: +// case CHANY: +// /* Get the coordinate of ending CB */ +// next_sb_coordinator = get_chan_node_ending_sb_coordinator(src_rr_node, des_rr_node); +// next_sb = device_rr_gsb.get_gsb(next_sb_coordinator); +// end_sb_x = next_sb.get_sb_x(); +// end_sb_y = next_sb.get_sb_y(); +// break; +// default: +// vpr_printf(TIO_MESSAGE_ERROR, "(File: %s [LINE%d]) Invalid type of rr_node!\n", +// __FILE__, __LINE__); +// exit(1); +// } +// +// /* Get the base coordinate of src_sb */ +// cur_sb_x = src_sb.get_sb_x(); +// cur_sb_y = src_sb.get_sb_y(); +// /* 4 cases: */ +// if ((INC_DIRECTION == src_rr_node->direction) +// &&(CHANX == src_rr_node->type)) { +// /* Follow the graph above, go through X channel */ +// for (int ix = src_sb.get_sb_x(); ix < end_sb_x; ix++) { +// DeviceCoordinator begin_sb_coordinator(ix, cur_sb_y); +// RRGSB begin_sb = device_rr_gsb.get_gsb(begin_sb_coordinator); +// /* If this is the ending point, we add a ending segment */ +// if (ix == end_sb_x - 1) { +// verilog_generate_report_timing_one_sb_ending_segments(fp, +// begin_sb, src_rr_node, +// des_rr_node, +// rpt_name); +// +// continue; +// } +// /* Report timing for the downstream segements, from a SB output to an adjacent CB input */ +// DeviceCoordinator end_sb_coordinator(ix + 1, cur_sb_y); +// RRGSB end_sb = device_rr_gsb.get_gsb(end_sb_coordinator); +// verilog_generate_report_timing_one_sb_thru_segments(fp, +// begin_sb, src_rr_node, +// end_sb, src_rr_node, +// rpt_name); +// } +// } else if ((INC_DIRECTION == src_rr_node->direction) +// &&(CHANY == src_rr_node->type)) { +// /* Follow the graph above, go through Y channel */ +// for (int iy = src_sb.get_sb_y(); iy < end_sb_y; iy++) { +// DeviceCoordinator begin_sb_coordinator(cur_sb_x, iy); +// RRGSB begin_sb = device_rr_gsb.get_gsb(begin_sb_coordinator); +// /* If this is the ending point, we add a ending segment */ +// if (iy == end_sb_y - 1) { +// verilog_generate_report_timing_one_sb_ending_segments(fp, +// begin_sb, src_rr_node, +// des_rr_node, +// rpt_name); +// continue; +// } +// /* Report timing for the downstream segements, from a SB output to an adjacent CB input */ +// DeviceCoordinator end_sb_coordinator(cur_sb_x, iy + 1); +// RRGSB end_sb = device_rr_gsb.get_gsb(end_sb_coordinator); +// verilog_generate_report_timing_one_sb_thru_segments(fp, +// begin_sb, src_rr_node, +// end_sb, src_rr_node, +// rpt_name); +// } +// } else if ((DEC_DIRECTION == src_rr_node->direction) +// &&(CHANX == src_rr_node->type)) { +// /* Follow the graph above, go through X channel */ +// for (int ix = src_sb.get_sb_x() - 1; ix > end_sb_x; ix--) { +// DeviceCoordinator begin_sb_coordinator(ix, cur_sb_y); +// RRGSB begin_sb = device_rr_gsb.get_gsb(begin_sb_coordinator); +// /* If this is the ending point, we add a ending segment */ +// if (ix == end_sb_x + 1) { +// verilog_generate_report_timing_one_sb_ending_segments(fp, +// begin_sb, src_rr_node, +// des_rr_node, +// rpt_name); +// continue; +// } +// /* Report timing for the downstream segements, from a SB output to an adjacent CB input */ +// DeviceCoordinator end_sb_coordinator(ix - 1, cur_sb_y); +// RRGSB end_sb = device_rr_gsb.get_gsb(end_sb_coordinator); +// verilog_generate_report_timing_one_sb_thru_segments(fp, +// begin_sb, src_rr_node, +// end_sb, src_rr_node, +// rpt_name); +// } +// } else if ((DEC_DIRECTION == src_rr_node->direction) +// &&(CHANY == src_rr_node->type)) { +// /* Follow the graph above, go through Y channel */ +// for (int iy = src_sb.get_sb_y() - 1; iy > end_sb_y; iy--) { +// DeviceCoordinator begin_sb_coordinator(cur_sb_x, iy); +// RRGSB begin_sb = device_rr_gsb.get_gsb(begin_sb_coordinator); +// /* If this is the ending point, we add a ending segment */ +// if (iy == end_sb_y + 1) { +// verilog_generate_report_timing_one_sb_ending_segments(fp, +// begin_sb, src_rr_node, +// des_rr_node, +// rpt_name); +// continue; +// } +// /* Report timing for the downstream segements, from a SB output to an adjacent CB input */ +// DeviceCoordinator end_sb_coordinator(cur_sb_x, iy - 1); +// RRGSB end_sb = device_rr_gsb.get_gsb(end_sb_coordinator); +// verilog_generate_report_timing_one_sb_thru_segments(fp, +// begin_sb, src_rr_node, +// end_sb, src_rr_node, +// rpt_name); +// } +// } +// +// /* Free */ +// my_free(rpt_name); +// +// return; +//} +// +// +///* Print the pins of SBs that a routing wire will go through +// * from the src_rr_node to the des_rr_node +// */ +//static +//void dump_verilog_one_sb_wire_segemental_report_timing(FILE* fp, +// t_syn_verilog_opts fpga_verilog_opts, +// t_sb* src_sb_info, +// t_rr_node* drive_rr_node, +// t_rr_node* src_rr_node, +// t_rr_node* des_rr_node, +// int path_cnt) { +// int L_wire; +// int ix, iy; +// int cur_sb_x, cur_sb_y; +// int end_sb_x, end_sb_y; +// t_cb* next_cb = NULL; +// t_sb* next_sb = NULL; +// char* rpt_name = NULL; +// +// /* Check the file handler */ +// if (NULL == fp) { +// vpr_printf(TIO_MESSAGE_ERROR, +// "(FILE:%s,LINE[%d])Invalid file handler for SDC generation", +// __FILE__, __LINE__); +// exit(1); +// } +// +// /* Check */ +// assert ((INC_DIRECTION == src_rr_node->direction) +// ||(DEC_DIRECTION == src_rr_node->direction)); +// assert ((CHANX == src_rr_node->type) +// ||(CHANY == src_rr_node->type)); +// +// L_wire = get_rr_node_wire_length(src_rr_node); +// +// /* Get report name */ +// rpt_name = gen_verilog_one_routing_report_timing_rpt_name(fpga_verilog_opts.report_timing_path, +// L_wire, path_cnt); +// +// /* Start printing report timing info */ +// fprintf(fp, "# L%d wire, Path ID: %d\n", +// L_wire, +// path_cnt); +// /* Report timing for the SB MUX delay, from the drive_rr_node to the wire_rr_node */ +// verilog_generate_one_report_timing_within_sb(fp, src_sb_info, +// drive_rr_node, +// src_rr_node); +// if (NULL != rpt_name) { +// fprintf(fp, " > %s\n", rpt_name); +// } else { +// fprintf(fp, "\n"); +// } +// +// /* Switch depends on the type of des_rr_node */ +// switch(des_rr_node->type) { +// /* Range of SBs that on the path +// * --------- +// * | | +// * | des_sb | +// * | [x][y] | +// * --------- +// * /|\ +// * | +// * --------- +// * | | +// * | thru_cb | +// * | | +// * --------- +// * /|\ +// * | +// * -------- ------- --------- ------- -------- +// * | | | | | | | | | | +// * | des_sb |<---|thru_cb|<---| src_sb |--->|thru_cb|--->| des_sb | +// * |[x-1][y]| | [x][y]| | | | [x][y]| |[x][y] | +// * -------- ------- --------- ------- -------- +// * | +// * \|/ +// * --------- +// * | | +// * | thru_cb | +// * | | +// * --------- +// * | +// * \|/ +// * --------- +// * | | +// * | des_sb | +// * | [x][y-1]| +// * --------- +// */ +// case IPIN: +// /* Get the coordinate of ending CB */ +// next_cb = get_chan_rr_node_ending_cb(src_rr_node, des_rr_node); +// assert(next_cb->type == src_rr_node->type); +// /* 4 cases: */ +// if ((INC_DIRECTION == src_rr_node->direction) +// &&(CHANX == src_rr_node->type)) { +// end_sb_x = next_cb->x; +// end_sb_y = next_cb->y; +// } else if ((INC_DIRECTION == src_rr_node->direction) +// &&(CHANY == src_rr_node->type)) { +// end_sb_x = next_cb->x; +// end_sb_y = next_cb->y; +// } else if ((DEC_DIRECTION == src_rr_node->direction) +// &&(CHANX == src_rr_node->type)) { +// end_sb_x = next_cb->x - 1; +// end_sb_y = next_cb->y; +// } else if ((DEC_DIRECTION == src_rr_node->direction) +// &&(CHANY == src_rr_node->type)) { +// end_sb_x = next_cb->x; +// end_sb_y = next_cb->y - 1; +// } +// break; +// /* Range of SBs that on the path +// * --------- +// * | | +// * | des_sb | +// * | [x][y+1]| +// * --------- +// * /|\ +// * | +// * --------- +// * | | +// * | thru_sb | +// * | | +// * --------- +// * /|\ +// * | +// * -------- ------- --------- ------- -------- +// * | | | | | | | | | | +// * | des_sb |<---|thru_sb|<---| src_sb |--->|thru_sb|--->| des_sb | +// * |[x-1][y]| | [x][y]| | | | [x][y]| |[x+1][y]| +// * -------- ------- --------- ------- -------- +// * | +// * \|/ +// * --------- +// * | | +// * | thru_sb | +// * | | +// * --------- +// * | +// * \|/ +// * --------- +// * | | +// * | des_sb | +// * | [x][y-1]| +// * --------- +// */ +// case CHANX: +// case CHANY: +// /* Get the coordinate of ending CB */ +// next_sb = get_chan_rr_node_ending_sb(src_rr_node, des_rr_node); +// end_sb_x = next_sb->x; +// end_sb_y = next_sb->y; +// break; +// default: +// vpr_printf(TIO_MESSAGE_ERROR, "(File: %s [LINE%d]) Invalid type of rr_node!\n", +// __FILE__, __LINE__); +// exit(1); +// } +// +// /* Get the base coordinate of src_sb */ +// cur_sb_x = src_sb_info->x; +// cur_sb_y = src_sb_info->y; +// /* 4 cases: */ +// if ((INC_DIRECTION == src_rr_node->direction) +// &&(CHANX == src_rr_node->type)) { +// /* Follow the graph above, go through X channel */ +// for (ix = src_sb_info->x; ix < end_sb_x; ix++) { +// /* If this is the ending point, we add a ending segment */ +// if (ix == end_sb_x - 1) { +// verilog_generate_report_timing_one_sb_ending_segments(fp, +// &(sb_info[ix][cur_sb_y]), src_rr_node, +// des_rr_node, +// rpt_name); +// +// continue; +// } +// /* Report timing for the downstream segements, from a SB output to an adjacent CB input */ +// verilog_generate_report_timing_one_sb_thru_segments(fp, +// &(sb_info[ix][cur_sb_y]), src_rr_node, +// &(sb_info[ix + 1][cur_sb_y]), src_rr_node, +// rpt_name); +// } +// } else if ((INC_DIRECTION == src_rr_node->direction) +// &&(CHANY == src_rr_node->type)) { +// /* Follow the graph above, go through Y channel */ +// for (iy = src_sb_info->y; iy < end_sb_y; iy++) { +// /* If this is the ending point, we add a ending segment */ +// if (iy == end_sb_y - 1) { +// verilog_generate_report_timing_one_sb_ending_segments(fp, +// &(sb_info[cur_sb_x][iy]), src_rr_node, +// des_rr_node, +// rpt_name); +// continue; +// } +// /* Report timing for the downstream segements, from a SB output to an adjacent CB input */ +// verilog_generate_report_timing_one_sb_thru_segments(fp, +// &(sb_info[cur_sb_x][iy]), src_rr_node, +// &(sb_info[cur_sb_x][iy + 1]), src_rr_node, +// rpt_name); +// } +// } else if ((DEC_DIRECTION == src_rr_node->direction) +// &&(CHANX == src_rr_node->type)) { +// /* Follow the graph above, go through X channel */ +// for (ix = src_sb_info->x - 1; ix > end_sb_x; ix--) { +// /* If this is the ending point, we add a ending segment */ +// if (ix == end_sb_x + 1) { +// verilog_generate_report_timing_one_sb_ending_segments(fp, +// &(sb_info[ix][cur_sb_y]), src_rr_node, +// des_rr_node, +// rpt_name); +// continue; +// } +// /* Report timing for the downstream segements, from a SB output to an adjacent CB input */ +// verilog_generate_report_timing_one_sb_thru_segments(fp, +// &(sb_info[ix][cur_sb_y]), src_rr_node, +// &(sb_info[ix - 1][cur_sb_y]), src_rr_node, +// rpt_name); +// } +// } else if ((DEC_DIRECTION == src_rr_node->direction) +// &&(CHANY == src_rr_node->type)) { +// /* Follow the graph above, go through Y channel */ +// for (iy = src_sb_info->y - 1; iy > end_sb_y; iy--) { +// /* If this is the ending point, we add a ending segment */ +// if (iy == end_sb_y + 1) { +// verilog_generate_report_timing_one_sb_ending_segments(fp, +// &(sb_info[cur_sb_x][iy]), src_rr_node, +// des_rr_node, +// rpt_name); +// continue; +// } +// /* Report timing for the downstream segements, from a SB output to an adjacent CB input */ +// verilog_generate_report_timing_one_sb_thru_segments(fp, +// &(sb_info[cur_sb_x][iy]), src_rr_node, +// &(sb_info[cur_sb_x][iy - 1]), src_rr_node, +// rpt_name); +// } +// } +// +// /* Free */ +// my_free(rpt_name); +// +// return; +//} + /* Print the pins of SBs that a routing wire will go through * from the src_rr_node to the des_rr_node */ @@ -1528,6 +2110,7 @@ void dump_verilog_sb_through_routing_pins(FILE* fp, } + /* Print the pins of SBs that a routing wire will go through * from the src_rr_node to the des_rr_node */ @@ -2298,7 +2881,7 @@ void verilog_generate_one_routing_segmental_report_timing(FILE* fp, return; } - +//BC TODO static void verilog_generate_routing_report_timing(t_trpt_opts trpt_opts, t_rr_node* LL_rr_node, @@ -2497,3 +3080,4 @@ void verilog_generate_report_timing(t_sram_orgz_info* cur_sram_orgz_info, return; } +