[arch] adding openfpga arch for ecb
This commit is contained in:
tangxifan
parent
c795dd2f1a
commit
bdc13e491e
|
|
@ -37,5 +37,6 @@ Note that an OpenFPGA architecture can be applied to multiple VPR architecture f
|
||||||
* <Int> is the number of clocks
|
* <Int> is the number of clocks
|
||||||
* <Pin> When specified, multiple clocks are in separated pins with different names
|
* <Pin> When specified, multiple clocks are in separated pins with different names
|
||||||
- abspath: All the paths in the architecture file are absolute and hardcoded.
|
- abspath: All the paths in the architecture file are absolute and hardcoded.
|
||||||
|
- ecb: *Enhanced Connection Block* where connection blocks includes feedback connections
|
||||||
|
|
||||||
Other features are used in naming should be listed here.
|
Other features are used in naming should be listed here.
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,193 @@
|
||||||
|
<?xml version="1.0"?>
|
||||||
|
<!-- Architecture annotation for OpenFPGA framework
|
||||||
|
This annotation supports the k6_N10_40nm.xml
|
||||||
|
- General purpose logic block
|
||||||
|
- K = 6, N = 10, I = 40
|
||||||
|
- Single mode
|
||||||
|
- Routing architecture
|
||||||
|
- L = 4, fc_in = 0.15, fc_out = 0.1
|
||||||
|
-->
|
||||||
|
<openfpga_architecture>
|
||||||
|
<technology_library>
|
||||||
|
<device_library>
|
||||||
|
<device_model name="logic" type="transistor">
|
||||||
|
<lib type="industry" corner="TOP_TT" ref="M" path="${OPENFPGA_PATH}/openfpga_flow/tech/PTM_45nm/45nm.pm"/>
|
||||||
|
<design vdd="0.9" pn_ratio="2"/>
|
||||||
|
<pmos name="pch" chan_length="40e-9" min_width="140e-9" variation="logic_transistor_var"/>
|
||||||
|
<nmos name="nch" chan_length="40e-9" min_width="140e-9" variation="logic_transistor_var"/>
|
||||||
|
</device_model>
|
||||||
|
<device_model name="io" type="transistor">
|
||||||
|
<lib type="academia" ref="M" path="${OPENFPGA_PATH}/openfpga_flow/tech/PTM_45nm/45nm.pm"/>
|
||||||
|
<design vdd="2.5" pn_ratio="3"/>
|
||||||
|
<pmos name="pch_25" chan_length="270e-9" min_width="320e-9" variation="io_transistor_var"/>
|
||||||
|
<nmos name="nch_25" chan_length="270e-9" min_width="320e-9" variation="io_transistor_var"/>
|
||||||
|
</device_model>
|
||||||
|
</device_library>
|
||||||
|
<variation_library>
|
||||||
|
<variation name="logic_transistor_var" abs_deviation="0.1" num_sigma="3"/>
|
||||||
|
<variation name="io_transistor_var" abs_deviation="0.1" num_sigma="3"/>
|
||||||
|
</variation_library>
|
||||||
|
</technology_library>
|
||||||
|
<circuit_library>
|
||||||
|
<circuit_model type="inv_buf" name="INVTX1" prefix="INVTX1" is_default="true">
|
||||||
|
<design_technology type="cmos" topology="inverter" size="1"/>
|
||||||
|
<device_technology device_model_name="logic"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<delay_matrix type="rise" in_port="in" out_port="out">
|
||||||
|
10e-12
|
||||||
|
</delay_matrix>
|
||||||
|
<delay_matrix type="fall" in_port="in" out_port="out">
|
||||||
|
10e-12
|
||||||
|
</delay_matrix>
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="inv_buf" name="buf4" prefix="buf4" is_default="false">
|
||||||
|
<design_technology type="cmos" topology="buffer" size="1" num_level="2" f_per_stage="4"/>
|
||||||
|
<device_technology device_model_name="logic"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<delay_matrix type="rise" in_port="in" out_port="out">
|
||||||
|
10e-12
|
||||||
|
</delay_matrix>
|
||||||
|
<delay_matrix type="fall" in_port="in" out_port="out">
|
||||||
|
10e-12
|
||||||
|
</delay_matrix>
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="inv_buf" name="tap_buf4" prefix="tap_buf4" is_default="false">
|
||||||
|
<design_technology type="cmos" topology="buffer" size="1" num_level="3" f_per_stage="4"/>
|
||||||
|
<device_technology device_model_name="logic"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<delay_matrix type="rise" in_port="in" out_port="out">
|
||||||
|
10e-12
|
||||||
|
</delay_matrix>
|
||||||
|
<delay_matrix type="fall" in_port="in" out_port="out">
|
||||||
|
10e-12
|
||||||
|
</delay_matrix>
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="pass_gate" name="TGATE" prefix="TGATE" is_default="true">
|
||||||
|
<design_technology type="cmos" topology="transmission_gate" nmos_size="1" pmos_size="2"/>
|
||||||
|
<device_technology device_model_name="logic"/>
|
||||||
|
<input_buffer exist="false"/>
|
||||||
|
<output_buffer exist="false"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="input" prefix="sel" size="1"/>
|
||||||
|
<port type="input" prefix="selb" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<delay_matrix type="rise" in_port="in sel selb" out_port="out">
|
||||||
|
10e-12 5e-12 5e-12
|
||||||
|
</delay_matrix>
|
||||||
|
<delay_matrix type="fall" in_port="in sel selb" out_port="out">
|
||||||
|
10e-12 5e-12 5e-12
|
||||||
|
</delay_matrix>
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="chan_wire" name="chan_segment" prefix="track_seg" is_default="true">
|
||||||
|
<design_technology type="cmos"/>
|
||||||
|
<input_buffer exist="false"/>
|
||||||
|
<output_buffer exist="false"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<wire_param model_type="pi" R="101" C="22.5e-15" num_level="1"/>
|
||||||
|
<!-- model_type could be T, res_val and cap_val DON'T CARE -->
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="wire" name="direct_interc" prefix="direct_interc" is_default="true">
|
||||||
|
<design_technology type="cmos"/>
|
||||||
|
<input_buffer exist="false"/>
|
||||||
|
<output_buffer exist="false"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<wire_param model_type="pi" R="0" C="0" num_level="1"/>
|
||||||
|
<!-- model_type could be T, res_val cap_val should be defined -->
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="mux" name="mux_tree" prefix="mux_tree" dump_structural_verilog="true">
|
||||||
|
<design_technology type="cmos" structure="tree" add_const_input="true" const_input_val="1"/>
|
||||||
|
<input_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<output_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<pass_gate_logic circuit_model_name="TGATE"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<port type="sram" prefix="sram" size="1"/>
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="mux" name="mux_tree_tapbuf" prefix="mux_tree_tapbuf" is_default="true" dump_structural_verilog="true">
|
||||||
|
<design_technology type="cmos" structure="tree" add_const_input="true" const_input_val="1"/>
|
||||||
|
<input_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<output_buffer exist="true" circuit_model_name="tap_buf4"/>
|
||||||
|
<pass_gate_logic circuit_model_name="TGATE"/>
|
||||||
|
<port type="input" prefix="in" size="1"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<port type="sram" prefix="sram" size="1"/>
|
||||||
|
</circuit_model>
|
||||||
|
<!--DFF subckt ports should be defined as <D> <Q> <CLK> <RESET> <SET> -->
|
||||||
|
<circuit_model type="ff" name="DFFSRQ" prefix="DFFSRQ" spice_netlist="${OPENFPGA_PATH}/openfpga_flow/openfpga_cell_library/spice/dff.sp" verilog_netlist="${OPENFPGA_PATH}/openfpga_flow/openfpga_cell_library/verilog/dff.v">
|
||||||
|
<design_technology type="cmos"/>
|
||||||
|
<input_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<output_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<port type="input" prefix="D" size="1"/>
|
||||||
|
<port type="input" prefix="set" lib_name="SET" size="1" is_global="true" default_val="0" is_set="true"/>
|
||||||
|
<port type="input" prefix="reset" lib_name="RST" size="1" is_global="true" default_val="0" is_reset="true"/>
|
||||||
|
<port type="output" prefix="Q" size="1"/>
|
||||||
|
<port type="clock" prefix="clk" lib_name="CK" size="1" is_global="true" default_val="0"/>
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="lut" name="lut4" prefix="lut4" dump_structural_verilog="true">
|
||||||
|
<design_technology type="cmos"/>
|
||||||
|
<input_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<output_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<lut_input_inverter exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<lut_input_buffer exist="true" circuit_model_name="buf4"/>
|
||||||
|
<pass_gate_logic circuit_model_name="TGATE"/>
|
||||||
|
<port type="input" prefix="in" size="4"/>
|
||||||
|
<port type="output" prefix="out" size="1"/>
|
||||||
|
<port type="sram" prefix="sram" size="16"/>
|
||||||
|
</circuit_model>
|
||||||
|
<!--Scan-chain DFF subckt ports should be defined as <D> <Q> <Qb> <CLK> <RESET> <SET> -->
|
||||||
|
<circuit_model type="ccff" name="DFF" prefix="DFF" spice_netlist="${OPENFPGA_PATH}/openfpga_flow/openfpga_cell_library/spice/dff.sp" verilog_netlist="${OPENFPGA_PATH}/openfpga_flow/openfpga_cell_library/verilog/dff.v">
|
||||||
|
<design_technology type="cmos"/>
|
||||||
|
<input_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<output_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<port type="input" prefix="D" size="1"/>
|
||||||
|
<port type="output" prefix="Q" size="1"/>
|
||||||
|
<port type="output" prefix="QN" size="1"/>
|
||||||
|
<port type="clock" prefix="prog_clk" lib_name="CK" size="1" is_global="true" default_val="0" is_prog="true"/>
|
||||||
|
</circuit_model>
|
||||||
|
<circuit_model type="iopad" name="GPIO" prefix="GPIO" spice_netlist="${OPENFPGA_PATH}/openfpga_flow/openfpga_cell_library/spice/gpio.sp" verilog_netlist="${OPENFPGA_PATH}/openfpga_flow/openfpga_cell_library/verilog/gpio.v">
|
||||||
|
<design_technology type="cmos"/>
|
||||||
|
<input_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<output_buffer exist="true" circuit_model_name="INVTX1"/>
|
||||||
|
<port type="inout" prefix="PAD" size="1" is_global="true" is_io="true" is_data_io="true"/>
|
||||||
|
<port type="sram" prefix="DIR" size="1" mode_select="true" circuit_model_name="DFF" default_val="1"/>
|
||||||
|
<port type="input" prefix="outpad" lib_name="A" size="1"/>
|
||||||
|
<port type="output" prefix="inpad" lib_name="Y" size="1"/>
|
||||||
|
</circuit_model>
|
||||||
|
</circuit_library>
|
||||||
|
<configuration_protocol>
|
||||||
|
<organization type="scan_chain" circuit_model_name="DFF"/>
|
||||||
|
</configuration_protocol>
|
||||||
|
<connection_block>
|
||||||
|
<switch name="ipin_cblock" circuit_model_name="mux_tree_tapbuf"/>
|
||||||
|
</connection_block>
|
||||||
|
<switch_block>
|
||||||
|
<switch name="0" circuit_model_name="mux_tree_tapbuf"/>
|
||||||
|
</switch_block>
|
||||||
|
<routing_segment>
|
||||||
|
<segment name="L4" circuit_model_name="chan_segment"/>
|
||||||
|
</routing_segment>
|
||||||
|
<direct_connection>
|
||||||
|
<direct name="clb_feedback0_to_0" circuit_model_name="mux_tree_tapbuf" type="part_of_cb"/>
|
||||||
|
<direct name="clb_feedback1_to_0" circuit_model_name="mux_tree_tapbuf" type="part_of_cb"/>
|
||||||
|
<direct name="clb_feedback2_to_0" circuit_model_name="mux_tree_tapbuf" type="part_of_cb"/>
|
||||||
|
<direct name="clb_feedback3_to_0" circuit_model_name="mux_tree_tapbuf" type="part_of_cb"/>
|
||||||
|
</direct_connection>
|
||||||
|
<pb_type_annotations>
|
||||||
|
<!-- physical pb_type binding in complex block IO -->
|
||||||
|
<pb_type name="io" physical_mode_name="physical" idle_mode_name="inpad"/>
|
||||||
|
<pb_type name="io[physical].iopad" circuit_model_name="GPIO" mode_bits="1"/>
|
||||||
|
<pb_type name="io[inpad].inpad" physical_pb_type_name="io[physical].iopad" mode_bits="1"/>
|
||||||
|
<pb_type name="io[outpad].outpad" physical_pb_type_name="io[physical].iopad" mode_bits="0"/>
|
||||||
|
<!-- End physical pb_type binding in complex block IO -->
|
||||||
|
<!-- physical pb_type binding in complex block CLB -->
|
||||||
|
<!-- physical mode will be the default mode if not specified -->
|
||||||
|
<pb_type name="clb.fle[n1_lut4].ble4.lut4" circuit_model_name="lut4"/>
|
||||||
|
<pb_type name="clb.fle[n1_lut4].ble4.ff" circuit_model_name="DFFSRQ"/>
|
||||||
|
<!-- End physical pb_type binding in complex block IO -->
|
||||||
|
</pb_type_annotations>
|
||||||
|
</openfpga_architecture>
|
||||||
Loading…
Reference in New Issue