[script] add dedicated testcase for source commands

openfpga_flow/openfpga_shell_scripts/external_file_for_source_example_script.openfpga

@@ -1,4 +1,4 @@
-# Use a file stream to run a few commands
+# Used in another script 'source_file_example_script.openfpga'
 # Check and correct any naming conflicts in the BLIF netlist
 check_netlist_naming_conflict --fix --report ./netlist_renaming.xml
 

openfpga_flow/openfpga_shell_scripts/source_file_for_example_script.openfpga

@@ -12,20 +12,7 @@ read_openfpga_simulation_setting -f ${OPENFPGA_SIM_SETTING_FILE}
 # to debug use --verbose options
 link_openfpga_arch --activity_file ${ACTIVITY_FILE} --sort_gsb_chan_node_in_edges
 
-# Use a stream  to run a few commands
-# Check and correct any naming conflicts in the BLIF netlist
-# Apply fix-up to Look-Up Table truth tables based on packing results
-# Build the module graph
-#  - Enabled compression on routing architecture modules
-#  - Enable pin duplication on grid modules
-# Write the fabric hierarchy of module graph to a file
-# This is used by hierarchical PnR flows
-# Repack the netlist to physical pbs
-# This must be done before bitstream generator and testbench generation
-# Strongly recommend it is done after all the fix-up have been applied
-# Build the bitstream
-#  - Output the fabric-independent bitstream to a file
-# Build fabric-dependent bitstream
+# Call a file to run a few commands
 source --command_stream ${OPENFPGA_EXTERNAL_SHELL_SCRIPT_DIR}/external_file_for_source_example_script.openfpga --from_file
 
 # Write fabric-dependent bitstream

openfpga_flow/tasks/basic_tests/source_command/source_file/config/task.conf

@@ -0,0 +1,38 @@
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+# Configuration file for running experiments
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+# timeout_each_job : FPGA Task script splits fpga flow into multiple jobs
+# Each job execute fpga_flow script on combination of architecture & benchmark
+# timeout_each_job is timeout for each job
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+
+[GENERAL]
+run_engine=openfpga_shell
+power_tech_file = ${PATH:OPENFPGA_PATH}/openfpga_flow/tech/PTM_45nm/45nm.xml
+power_analysis = true
+spice_output=false
+verilog_output=true
+timeout_each_job = 20*60
+fpga_flow=yosys_vpr
+
+[OpenFPGA_SHELL]
+openfpga_shell_template=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_shell_scripts/source_file_example_script.openfpga
+openfpga_arch_file=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_arch/k4_N4_40nm_cc_openfpga.xml
+openfpga_sim_setting_file=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_simulation_settings/auto_sim_openfpga.xml
+openfpga_vpr_device_layout=2x2
+openfpga_vpr_route_chan_width=20
+openfpga_external_shell_script_dir=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_shell_scripts
+
+[ARCHITECTURES]
+arch0=${PATH:OPENFPGA_PATH}/openfpga_flow/vpr_arch/k4_N4_tileable_40nm.xml
+
+[BENCHMARKS]
+bench0=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/micro_benchmark/and2/and2.v
+
+[SYNTHESIS_PARAM]
+bench_read_verilog_options_common = -nolatches
+bench0_top = and2
+
+[SCRIPT_PARAM_MIN_ROUTE_CHAN_WIDTH]
+end_flow_with_test=
+vpr_fpga_verilog_formal_verification_top_netlist=

openfpga_flow/tasks/basic_tests/source_command/source_string/config/task.conf

@@ -0,0 +1,37 @@
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+# Configuration file for running experiments
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+# timeout_each_job : FPGA Task script splits fpga flow into multiple jobs
+# Each job execute fpga_flow script on combination of architecture & benchmark
+# timeout_each_job is timeout for each job
+# = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+
+[GENERAL]
+run_engine=openfpga_shell
+power_tech_file = ${PATH:OPENFPGA_PATH}/openfpga_flow/tech/PTM_45nm/45nm.xml
+power_analysis = true
+spice_output=false
+verilog_output=true
+timeout_each_job = 20*60
+fpga_flow=yosys_vpr
+
+[OpenFPGA_SHELL]
+openfpga_shell_template=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_shell_scripts/source_string_example_script.openfpga
+openfpga_arch_file=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_arch/k4_N4_40nm_cc_openfpga.xml
+openfpga_sim_setting_file=${PATH:OPENFPGA_PATH}/openfpga_flow/openfpga_simulation_settings/auto_sim_openfpga.xml
+openfpga_vpr_device_layout=2x2
+openfpga_vpr_route_chan_width=20
+
+[ARCHITECTURES]
+arch0=${PATH:OPENFPGA_PATH}/openfpga_flow/vpr_arch/k4_N4_tileable_40nm.xml
+
+[BENCHMARKS]
+bench0=${PATH:OPENFPGA_PATH}/openfpga_flow/benchmarks/micro_benchmark/and2/and2.v
+
+[SYNTHESIS_PARAM]
+bench_read_verilog_options_common = -nolatches
+bench0_top = and2
+
+[SCRIPT_PARAM_MIN_ROUTE_CHAN_WIDTH]
+end_flow_with_test=
+vpr_fpga_verilog_formal_verification_top_netlist=