OpenFPGA/openfpga_flow/openfpga_cell_library/verilog/mux2.v

//-----------------------------------------------------
// Design Name : MUX2
// File Name   : mux2.v
// Function    : Standard cell (static gate) implementation 
//               of 2-input multiplexers
// Coder       : Xifan Tang
//-----------------------------------------------------

module MUX2(
    // iVerilog is buggy on the 'input A' declaration when deposit initial
    // values 
	input [0:0] A,   // Data input 0
	input [0:0] B,   // Data input 1
	input [0:0] S0, // Select port
	output [0:0] Y  // Data output
	);
  
	assign Y = S0 ? B : A;

// Note: 
//	 MUX2 appears will appear in LUTs, routing multiplexers,
//   being a component in combinational loops
//   To help convergence in simulation 
//   i.e., to avoid the X (undetermined) signals,
//   the following timing constraints and signal initialization 
//   has to be added!

`ifdef ENABLE_TIMING
// ------ BEGIN Pin-to-pin Timing constraints -----
	specify
		(A => Y) = (0.001, 0.001);
		(B => Y) = (0.001, 0.001);
		(S0 => Y) = (0.001, 0.001);
	endspecify
// ------ END Pin-to-pin Timing constraints -----
`endif

`ifdef ENABLE_SIGNAL_INITIALIZATION
// ------ BEGIN driver initialization -----
	initial begin
	`ifdef ENABLE_FORMAL_VERIFICATION
		$deposit(A, 1'b0);
		$deposit(B, 1'b0);
		$deposit(S0, 1'b0);
	`else
		$deposit(A, $random);
		$deposit(B, $random);
		$deposit(S0, $random);
	`endif

	end
// ------ END driver initialization -----
`endif

endmodule

module MUX2D2(
    // iVerilog is buggy on the 'input A' declaration when deposit initial
    // values 
	input [0:0] AA,   // Data input 0
	input [0:0] BB,   // Data input 1
	input [0:0] SS0, // Select port
	output [0:0] YY  // Data output
	);
  
	assign YY = SS0 ? BB : AA;

// Note: 
//	 MUX2 appears will appear in LUTs, routing multiplexers,
//   being a component in combinational loops
//   To help convergence in simulation 
//   i.e., to avoid the X (undetermined) signals,
//   the following timing constraints and signal initialization 
//   has to be added!

`ifdef ENABLE_TIMING
// ------ BEGIN Pin-to-pin Timing constraints -----
	specify
		(AA => YY) = (0.001, 0.001);
		(BB => YY) = (0.001, 0.001);
		(SS0 => YY) = (0.001, 0.001);
	endspecify
// ------ END Pin-to-pin Timing constraints -----
`endif

`ifdef ENABLE_SIGNAL_INITIALIZATION
// ------ BEGIN driver initialization -----
	initial begin
	`ifdef ENABLE_FORMAL_VERIFICATION
		$deposit(AA, 1'b0);
		$deposit(BB, 1'b0);
		$deposit(SS0, 1'b0);
	`else
		$deposit(AA, $random);
		$deposit(BB, $random);
		$deposit(SS0, $random);
	`endif

	end
// ------ END driver initialization -----
`endif

endmodule


//-----------------------------------------------------
// Design Name : CARRY_MUX2
// File Name   : mux2.v
// Function    : Standard cell (static gate) implementation
//               of 2-input multiplexers to be used by carry logic 
// Coder       : Xifan Tang
//-----------------------------------------------------

module CARRY_MUX2(
	input [0:0] A0,   // Data input 0
	input [0:0] A1,   // Data input 1
	input [0:0] S, // Select port
	output [0:0] Y  // Data output
	);
  
	assign Y = S ? A1 : A0;

// Note: 
//	 MUX2 appears in the datapath logic driven by carry-in and LUT outputs
//	 where initial values and signal deposit are not required

endmodule