From a078a0f511ce59b35e40642f4c25aefef0349c90 Mon Sep 17 00:00:00 2001 From: Julien Cristau Date: Mon, 13 Aug 2007 15:12:20 +0200 Subject: [PATCH] xmodmap 1.0.3. --- debian/changelog | 4 +- xmodmap/ChangeLog | 285 +++++- xmodmap/INSTALL | 236 ----- xmodmap/Makefile.am | 21 +- xmodmap/Makefile.in | 202 ++--- xmodmap/aclocal.m4 | 1990 +++++++++++++++++++++--------------------- xmodmap/autogen.sh | 13 + xmodmap/compile | 142 --- xmodmap/config.guess | 32 +- xmodmap/config.h.in | 3 + xmodmap/config.sub | 16 +- xmodmap/configure | 364 +++++--- xmodmap/configure.ac | 7 +- xmodmap/depcomp | 64 +- xmodmap/handle.c | 72 +- xmodmap/install-sh | 342 ++++++-- xmodmap/missing | 61 +- xmodmap/pf.c | 8 +- xmodmap/xmodmap.c | 80 +- xmodmap/xmodmap.h | 6 +- xmodmap/xmodmap.man | 3 +- 21 files changed, 2074 insertions(+), 1877 deletions(-) create mode 100755 xmodmap/autogen.sh delete mode 100755 xmodmap/compile diff --git a/debian/changelog b/debian/changelog index 697165c..da62c68 100644 --- a/debian/changelog +++ b/debian/changelog @@ -2,9 +2,11 @@ x11-xserver-utils (7.2+4) UNRELEASED; urgency=low * iceauth 1.0.2. + removes blank line in the manpage (closes: #25285). + * xmodmap 1.0.3. + + manpage updated to state that -pm is the default (closes: #236198) * Add upstream URL to debian/copyright. - -- Julien Cristau Mon, 13 Aug 2007 15:03:45 +0200 + -- Julien Cristau Mon, 13 Aug 2007 15:10:05 +0200 x11-xserver-utils (7.2+3) experimental; urgency=low diff --git a/xmodmap/ChangeLog b/xmodmap/ChangeLog index c81f279..cf22c09 100644 --- a/xmodmap/ChangeLog +++ b/xmodmap/ChangeLog @@ -1,38 +1,279 @@ -2006-04-26 Adam Jackson +commit 8d9922bdc53c5538dbfbba65f5a3e15afc8aea91 +Author: Alan Coopersmith +Date: Mon Aug 6 15:58:57 2007 -0700 - * configure.ac: - Bump to 1.0.1 + Version bump: 1.0.3 -2006-03-22 Matthias Hopf +commit 822b6bffce953041accc13f4633d2c5d4a8c8dcd +Author: Alan Coopersmith +Date: Tue Jul 17 15:57:10 2007 -0700 - * handle.c: (do_pointer): - Allow changing of only a few buttons (not all). + Use strncasecmp if we can, instead of our own homegrown strncmp_nocase -2005-12-14 Kevin E. Martin +commit d76839f34692c7bc4ad1337ca23a3362534c1172 +Author: Alan Coopersmith +Date: Tue Jul 17 15:52:39 2007 -0700 - * configure.ac: - Update package version number for final X11R7 release candidate. + Change usage messages from arrays of strings to simple const strings -2005-12-06 Kevin E. Martin +commit 658d0022a87c5d3afe3e006e539c5c1b981a8d73 +Author: Alan Coopersmith +Date: Tue Jul 17 13:27:50 2007 -0700 - * Makefile.am: - Change *man_SOURCES ==> *man_PRE to fix autotools warnings. + Constify some simple cases -2005-12-03 Kevin E. Martin +commit b7aafba248db5e9c3ba39e4819d0b9ae156d2c82 +Author: Alan Coopersmith +Date: Tue Jul 17 13:03:38 2007 -0700 - * configure.ac: - Update package version number for X11R7 RC3 release. + sparse warning: non-ANSI definition of function 'process_file' & 'process_line' -2005-10-18 Kevin E. Martin +commit e1cb231b31be520b76aeb72acc1af9ff6682fa9d +Author: Alan Coopersmith +Date: Tue Jul 17 13:01:07 2007 -0700 - * configure.ac: - Update package version number for RC1 release. + Add hooks for checking source code with lint/sparse/etc. -2005-09-28 Kristian Høgsberg +commit eda127631001674cd40466fddb5225e618c2a327 +Author: Alan Coopersmith +Date: Tue Jul 17 12:54:16 2007 -0700 - * AUTHORS: Copy bits from COPYING here. + Remove unused code - * README: Copy first paragraph from man page. +commit b57637a154a40e874a6bcb351aaa8335e86ae3c0 +Author: Alan Coopersmith +Date: Tue Jul 17 12:48:31 2007 -0700 - * Makefile.am (EXTRA_DIST): Add swap.km. + Coverity #678: get_keysym_list: Returned without freeing storage "keysymlist" + + Free allocated memory in error path when it's not being returned +commit 72a01c6a3bae2cf113ab0ec812df41fec9b99a51 +Author: Alan Coopersmith +Date: Tue Jul 17 11:04:16 2007 -0700 + + Replace static ChangeLog with dist-hook to generate from git log + +commit 4dfbd74bda684bea748fbbcbfc172f6325423d12 +Author: Alan Coopersmith +Date: Tue Jul 17 10:37:57 2007 -0700 + + Use AM_CFLAGS instead of xmodmap_CFLAGS to avoid automake-1.10 warnings + +commit fd25acd688b86a1490198d61f66d2503a87883a0 +Author: Alan Coopersmith +Date: Wed Apr 11 15:30:16 2007 -0700 + + Bug 10616: manpage should note -pm is the default if no options are given + + X.Org Bugzilla #10616 + Reported upstream from + Debian Bug #236918 + +commit 15a83b060b9b4bd7d6a64eacc7191e33eb91b269 +Author: Adam Jackson +Date: Fri Oct 13 17:55:42 2006 -0400 + + Bump to 1.0.2 + +commit 27404e37e50fe637f33f6efac2fa73c9cfc1026c +Author: Alan Coopersmith +Date: Wed Sep 13 15:08:59 2006 -0700 + + Add *~ to .gitignore to ignore emacs droppings + +commit 98063dc377dff55f1b057eda14ace69beed82c16 +Author: Alan Coopersmith +Date: Wed Sep 13 15:08:19 2006 -0700 + + renamed: .cvsignore -> .gitignore + +commit 86a4f2a2d66bbeb6c9deee9133eb335f593c47f9 +Author: Alan Coopersmith +Date: Wed Sep 13 15:07:16 2006 -0700 + + Sun bug 6459447: Add note on reversing CapsLock/Control swap to man page + + http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6459447 + +commit 7410e78207ca01d70d9df14eb1e4e07e7fe5f237 +Author: Adam Jackson +Date: Wed Apr 26 23:42:50 2006 +0000 + + Bump to 1.0.1 + +commit e8a5353022f9e616c22a7a1659ff4d4d968f5d88 +Author: Matthias Hopf +Date: Wed Mar 22 15:14:31 2006 +0000 + + Allow changing of only a few buttons (not all). + +commit b9854ab5e66bf9ec8911d6573440738325cd51b4 +Author: Kevin E Martin +Date: Thu Dec 15 00:24:09 2005 +0000 + + Update package version number for final X11R7 release candidate. + +commit a01cd5fe1c387c62b11368e3fac100e24e7d841e +Author: Kevin E Martin +Date: Tue Dec 6 22:48:24 2005 +0000 + + Change *man_SOURCES ==> *man_PRE to fix autotools warnings. + +commit d39efd733ad56391082b08f9f486cf147e931197 +Author: Kevin E Martin +Date: Sat Dec 3 05:49:26 2005 +0000 + + Update package version number for X11R7 RC3 release. + +commit 8a0747a21f9737212784c55b62044e86caf1fbc8 +Author: Alan Coopersmith +Date: Mon Nov 28 22:01:45 2005 +0000 + + Change *mandir targets to use new *_MAN_DIR variables set by xorg-macros.m4 + update to fix bug #5167 (Linux prefers *.1x man pages in man1 subdir) + +commit 5e4dec81bffb5f296773c43aa45f52dc354c1886 +Author: Eric Anholt +Date: Mon Nov 21 10:35:05 2005 +0000 + + Another pass at .cvsignores for apps. + +commit f9c0b2a947ea8690ac73e8f9ce857cd195551c01 +Author: Eric Anholt +Date: Sun Nov 20 22:08:54 2005 +0000 + + Add/improve .cvsignore files for apps. + +commit 65fb2a168c968e486be090caad29349427e4d65e +Author: Kevin E Martin +Date: Wed Oct 19 02:47:56 2005 +0000 + + Update package version number for RC1 release. + +commit 4c47648e4789efe03eec74c39b2ab6b9b27230fc +Author: Alan Coopersmith +Date: Mon Oct 17 23:56:24 2005 +0000 + + Use @APP_MAN_SUFFIX@ instead of $(APP_MAN_SUFFIX) in macro substitutions to + work better with BSD make + +commit 356f26e95eb7003f9f65ffe480773f0d788dc871 +Author: Alan Coopersmith +Date: Fri Oct 14 00:25:47 2005 +0000 + + Use sed to fill in variables in man page + +commit c4483b314106bcd2bb13e49650cfd279f74da73e +Author: Kristian Høgsberg +Date: Wed Sep 28 19:28:15 2005 +0000 + + Copy bits from COPYING here. + Copy first paragraph from man page. + Add swap.km. + +commit 149fc373521b4ceb33e37c693834a27a702fcc2b +Author: Kevin E Martin +Date: Fri Jul 29 21:22:36 2005 +0000 + + Various changes preparing packages for RC0: + - Verify and update package version numbers as needed + - Implement versioning scheme + - Change bug address to point to bugzilla bug entry form + - Disable loadable i18n in libX11 by default (use --enable-loadable-i18n to + reenable it) + - Fix makedepend to use pkgconfig and pass distcheck + - Update build script to build macros first + - Update modular Xorg version + +commit 327ffdf93fd0b8f7942c08653cb644be2062428c +Author: Kevin E Martin +Date: Thu Jul 28 02:58:59 2005 +0000 + + Add build system for xmodmap Add xmodmap to build script + +commit 9145de293109ba96fc8b97ac59c16c51b992f416 +Author: Kristian Høgsberg +Date: Thu Nov 11 15:37:01 2004 +0000 + + Fix #1818 + +commit d9e41011e4477f581fb5592ad81fc081e0b606b9 +Author: Alan Coopersmith +Date: Sat Oct 30 20:33:44 2004 +0000 + + Add -d flag for compilers like the Sun C compilers that produce dependency + lists themselves. To use with the Sun compilers, add to host.def: # + define UseCCMakeDepend YES # define DependFlags -cc $(CC) -d -xM (Sun + bug id #4245688 - fix by Alan Coopersmith) + Add Solaris to the platforms on which mprotect is run to set execute + permissions when necessary. (Sun bug id #6175128 - fix by Alan + Coopersmith) + Internationalize digital output (Sun bug id #4119396 - fix by Steve + Swales), add -bgpixmap option to set XPM file as background (originally + from STSF project version of xclock by Alan Coopersmith) + xc/programs/xmodmap/handle.c,pf.c xmodmap was printing line numbers which + are one too low in error messages (Xorg bugzilla #1739, Sun bug id + 4637857 - fix by Sam Lau) + +commit ce64b2b312a73b9a4f266da8810ab552af4fbb1e +Author: Søren Sandmann Pedersen +Date: Fri Oct 15 00:44:08 2004 +0000 + + Thu Oct 14 20:43:03 2004 Søren Sandmann + Fix a write-to-constant-string issue. + Fix several buffer overruns. + +commit 8ad5d3b908d68353d407fa8f678c93320760eb12 +Author: Egbert Eich +Date: Fri Apr 23 19:54:59 2004 +0000 + + Merging XORG-CURRENT into trunk + +commit 536ef73f2a5310f25c99a9c3a41f71d032ef95a6 +Author: Egbert Eich +Date: Sun Mar 14 08:35:42 2004 +0000 + + Importing vendor version xf86-4_4_99_1 on Sun Mar 14 00:26:39 PST 2004 + +commit 11073ef989618e076133b1f58be7a406ba373b1b +Author: Egbert Eich +Date: Wed Mar 3 12:13:15 2004 +0000 + + Importing vendor version xf86-4_4_0 on Wed Mar 3 04:09:24 PST 2004 + +commit e8ce00f47c06ea1bfcfd6538a80a10b868cee19e +Author: Egbert Eich +Date: Thu Feb 26 13:36:26 2004 +0000 + + readding XFree86's cvs IDs + +commit 072ef0f49182d381ac7e630eccd1b5b6749334a7 +Author: Egbert Eich +Date: Thu Feb 26 09:24:14 2004 +0000 + + Importing vendor version xf86-4_3_99_903 on Wed Feb 26 01:21:00 PST 2004 + +commit eb9faf624f11691c4ca7344f4169117718cea9c7 +Author: Kaleb Keithley +Date: Thu Dec 4 22:03:56 2003 +0000 + + XFree86 4.3.99.901 (RC 1) + +commit d678c60d8b5bede9e61f532aa1740d741b8bbe90 +Author: Kaleb Keithley +Date: Tue Nov 25 19:29:15 2003 +0000 + + XFree86 4.3.99.16 Bring the tree up to date for the Cygwin folks + +commit dc0f15394719e18bb9b01e70468f4d9908488d35 +Author: Kaleb Keithley +Date: Fri Nov 14 16:49:23 2003 +0000 + + XFree86 4.3.0.1 + +commit e29f1f1ed2128d7382a72ccb1684045fe4bc8183 +Author: Kaleb Keithley +Date: Fri Nov 14 15:54:54 2003 +0000 + + R6.6 is the Xorg base-line diff --git a/xmodmap/INSTALL b/xmodmap/INSTALL index 23e5f25..e69de29 100644 --- a/xmodmap/INSTALL +++ b/xmodmap/INSTALL @@ -1,236 +0,0 @@ -Installation Instructions -************************* - -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free -Software Foundation, Inc. - -This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. - -Basic Installation -================== - -These are generic installation instructions. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). - - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. (Caching is -disabled by default to prevent problems with accidental use of stale -cache files.) - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you -may remove or edit it. - - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You only need -`configure.ac' if you want to change it or regenerate `configure' using -a newer version of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. - - Running `configure' takes awhile. While running, it prints some - messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. - - 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - -Compilers and Options -===================== - -Some systems require unusual options for compilation or linking that the -`configure' script does not know about. Run `./configure --help' for -details on some of the pertinent environment variables. - - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: - - ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - -You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you must use a version of `make' that -supports the `VPATH' variable, such as GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. - - If you have to use a `make' that does not support the `VPATH' -variable, you have to compile the package for one architecture at a -time in the source code directory. After you have installed the -package for one architecture, use `make distclean' before reconfiguring -for another architecture. - -Installation Names -================== - -By default, `make install' installs the package's commands under -`/usr/local/bin', include files under `/usr/local/include', etc. You -can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -pass the option `--exec-prefix=PREFIX' to `configure', the package uses -PREFIX as the prefix for installing programs and libraries. -Documentation and other data files still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=DIR' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Optional Features -================= - -Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - -Specifying the System Type -========================== - -There may be some features `configure' cannot figure out automatically, -but needs to determine by the type of machine the package will run on. -Usually, assuming the package is built to be run on the _same_ -architectures, `configure' can figure that out, but if it prints a -message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS KERNEL-OS - - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the option `--target=TYPE' to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. - -Sharing Defaults -================ - -If you want to set default values for `configure' scripts to share, you -can create a site shell script called `config.site' that gives default -values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Defining Variables -================== - -Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). Here is a another example: - - /bin/bash ./configure CONFIG_SHELL=/bin/bash - -Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent -configuration-related scripts to be executed by `/bin/bash'. - -`configure' Invocation -====================== - -`configure' recognizes the following options to control how it operates. - -`--help' -`-h' - Print a summary of the options to `configure', and exit. - -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to - disable caching. - -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. - diff --git a/xmodmap/Makefile.am b/xmodmap/Makefile.am index 4c2a2b2..6c43dd3 100644 --- a/xmodmap/Makefile.am +++ b/xmodmap/Makefile.am @@ -21,7 +21,7 @@ bin_PROGRAMS = xmodmap -xmodmap_CFLAGS = $(DEP_CFLAGS) +AM_CFLAGS = $(DEP_CFLAGS) xmodmap_LDADD = $(DEP_LIBS) xmodmap_SOURCES = \ @@ -36,6 +36,8 @@ appman_PRE = \ xmodmap.man EXTRA_DIST = \ + ChangeLog \ + autogen.sh \ swap.km appmandir = $(APP_MAN_DIR) @@ -68,3 +70,20 @@ SUFFIXES = .$(APP_MAN_SUFFIX) .man .man.$(APP_MAN_SUFFIX): sed $(MAN_SUBSTS) < $< > $@ + +MAINTAINERCLEANFILES = ChangeLog + +.PHONY: ChangeLog + +ChangeLog: + (GIT_DIR=$(top_srcdir)/.git git-log > .changelog.tmp && mv .changelog.tmp ChangeLog; rm -f .changelog.tmp) || (touch ChangeLog; echo 'git directory not found: installing possibly empty changelog.' >&2) + +dist-hook: ChangeLog + +if LINT +ALL_LINT_FLAGS=$(LINT_FLAGS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) + +lint: + $(LINT) $(ALL_LINT_FLAGS) $(AM_CFLAGS) $(xmodmap_SOURCES) +endif LINT diff --git a/xmodmap/Makefile.in b/xmodmap/Makefile.in index 2364313..4db8b02 100644 --- a/xmodmap/Makefile.in +++ b/xmodmap/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.9.6 from Makefile.am. +# Makefile.in generated by automake 1.10 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005 Free Software Foundation, Inc. +# 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -36,15 +36,11 @@ # PERFORMANCE OF THIS SOFTWARE. -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = . am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c @@ -59,29 +55,29 @@ POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = xmodmap$(EXEEXT) +subdir = . DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ - compile config.guess config.sub depcomp install-sh missing -subdir = . + config.guess config.sub depcomp install-sh missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno configure.status.lineno + configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appmandir)" binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(bin_PROGRAMS) -am_xmodmap_OBJECTS = xmodmap-exec.$(OBJEXT) xmodmap-handle.$(OBJEXT) \ - xmodmap-pf.$(OBJEXT) xmodmap-xmodmap.$(OBJEXT) +am_xmodmap_OBJECTS = exec.$(OBJEXT) handle.$(OBJEXT) pf.$(OBJEXT) \ + xmodmap.$(OBJEXT) xmodmap_OBJECTS = $(am_xmodmap_OBJECTS) am__DEPENDENCIES_1 = xmodmap_DEPENDENCIES = $(am__DEPENDENCIES_1) -DEFAULT_INCLUDES = -I. -I$(srcdir) -I. +DEFAULT_INCLUDES = -I.@am__isrc@ depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ @@ -114,8 +110,6 @@ distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ APP_MAN_DIR = @APP_MAN_DIR@ APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ @@ -140,6 +134,7 @@ ECHO_T = @ECHO_T@ EXEEXT = @EXEEXT@ FILE_MAN_DIR = @FILE_MAN_DIR@ FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ +INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -149,13 +144,14 @@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIB_MAN_DIR = @LIB_MAN_DIR@ LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ +LINT = @LINT@ +LINT_FLAGS = @LINT_FLAGS@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ -MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ -MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ MAKEINFO = @MAKEINFO@ MISC_MAN_DIR = @MISC_MAN_DIR@ MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ +MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ @@ -169,9 +165,11 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -183,6 +181,7 @@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ +builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ @@ -210,9 +209,12 @@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ -xmodmap_CFLAGS = $(DEP_CFLAGS) +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +AM_CFLAGS = $(DEP_CFLAGS) xmodmap_LDADD = $(DEP_LIBS) xmodmap_SOURCES = \ exec.c \ @@ -225,7 +227,7 @@ xmodmap_SOURCES = \ appman_PRE = \ xmodmap.man -EXTRA_DIST = swap.km $(appman_PRE) +EXTRA_DIST = ChangeLog autogen.sh swap.km $(appman_PRE) appmandir = $(APP_MAN_DIR) appman_DATA = $(appman_PRE:man=@APP_MAN_SUFFIX@) CLEANFILES = $(appman_DATA) @@ -248,6 +250,10 @@ MAN_SUBSTS = \ -e 's|__filemansuffix__|$(FILE_MAN_SUFFIX)|g' SUFFIXES = .$(APP_MAN_SUFFIX) .man +MAINTAINERCLEANFILES = ChangeLog +@LINT_TRUE@ALL_LINT_FLAGS = $(LINT_FLAGS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ +@LINT_TRUE@ $(AM_CPPFLAGS) $(CPPFLAGS) + all: config.h $(MAKE) $(AM_MAKEFLAGS) all-am @@ -290,7 +296,7 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ - $(MAKE) stamp-h1; \ + $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @@ -305,7 +311,7 @@ distclean-hdr: -rm -f config.h stamp-h1 install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" + test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; for p in $$list; do \ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ if test -f $$p \ @@ -328,7 +334,7 @@ clean-binPROGRAMS: -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) xmodmap$(EXEEXT): $(xmodmap_OBJECTS) $(xmodmap_DEPENDENCIES) @rm -f xmodmap$(EXEEXT) - $(LINK) $(xmodmap_LDFLAGS) $(xmodmap_OBJECTS) $(xmodmap_LDADD) $(LIBS) + $(LINK) $(xmodmap_OBJECTS) $(xmodmap_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) @@ -336,84 +342,27 @@ mostlyclean-compile: distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xmodmap-exec.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xmodmap-handle.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xmodmap-pf.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xmodmap-xmodmap.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/exec.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/handle.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pf.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xmodmap.Po@am__quote@ .c.o: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` - -xmodmap-exec.o: exec.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xmodmap_CFLAGS) $(CFLAGS) -MT xmodmap-exec.o -MD -MP -MF "$(DEPDIR)/xmodmap-exec.Tpo" -c -o xmodmap-exec.o `test -f 'exec.c' || echo '$(srcdir)/'`exec.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xmodmap-exec.Tpo" "$(DEPDIR)/xmodmap-exec.Po"; else rm -f "$(DEPDIR)/xmodmap-exec.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='exec.c' object='xmodmap-exec.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xmodmap_CFLAGS) $(CFLAGS) -c -o xmodmap-exec.o `test -f 'exec.c' || echo '$(srcdir)/'`exec.c - -xmodmap-exec.obj: exec.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xmodmap_CFLAGS) $(CFLAGS) -MT xmodmap-exec.obj -MD -MP -MF "$(DEPDIR)/xmodmap-exec.Tpo" -c -o xmodmap-exec.obj `if test -f 'exec.c'; then $(CYGPATH_W) 'exec.c'; else $(CYGPATH_W) '$(srcdir)/exec.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xmodmap-exec.Tpo" "$(DEPDIR)/xmodmap-exec.Po"; else rm -f "$(DEPDIR)/xmodmap-exec.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='exec.c' object='xmodmap-exec.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xmodmap_CFLAGS) $(CFLAGS) -c -o xmodmap-exec.obj `if test -f 'exec.c'; then $(CYGPATH_W) 'exec.c'; else $(CYGPATH_W) '$(srcdir)/exec.c'; fi` - -xmodmap-handle.o: handle.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xmodmap_CFLAGS) $(CFLAGS) -MT xmodmap-handle.o -MD -MP -MF "$(DEPDIR)/xmodmap-handle.Tpo" -c -o xmodmap-handle.o `test -f 'handle.c' || echo '$(srcdir)/'`handle.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xmodmap-handle.Tpo" "$(DEPDIR)/xmodmap-handle.Po"; else rm -f "$(DEPDIR)/xmodmap-handle.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='handle.c' object='xmodmap-handle.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xmodmap_CFLAGS) $(CFLAGS) -c -o xmodmap-handle.o `test -f 'handle.c' || echo '$(srcdir)/'`handle.c - -xmodmap-handle.obj: handle.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xmodmap_CFLAGS) $(CFLAGS) -MT xmodmap-handle.obj -MD -MP -MF "$(DEPDIR)/xmodmap-handle.Tpo" -c -o xmodmap-handle.obj `if test -f 'handle.c'; then $(CYGPATH_W) 'handle.c'; else $(CYGPATH_W) '$(srcdir)/handle.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xmodmap-handle.Tpo" "$(DEPDIR)/xmodmap-handle.Po"; else rm -f "$(DEPDIR)/xmodmap-handle.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='handle.c' object='xmodmap-handle.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xmodmap_CFLAGS) $(CFLAGS) -c -o xmodmap-handle.obj `if test -f 'handle.c'; then $(CYGPATH_W) 'handle.c'; else $(CYGPATH_W) '$(srcdir)/handle.c'; fi` - -xmodmap-pf.o: pf.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xmodmap_CFLAGS) $(CFLAGS) -MT xmodmap-pf.o -MD -MP -MF "$(DEPDIR)/xmodmap-pf.Tpo" -c -o xmodmap-pf.o `test -f 'pf.c' || echo '$(srcdir)/'`pf.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xmodmap-pf.Tpo" "$(DEPDIR)/xmodmap-pf.Po"; else rm -f "$(DEPDIR)/xmodmap-pf.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='pf.c' object='xmodmap-pf.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xmodmap_CFLAGS) $(CFLAGS) -c -o xmodmap-pf.o `test -f 'pf.c' || echo '$(srcdir)/'`pf.c - -xmodmap-pf.obj: pf.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xmodmap_CFLAGS) $(CFLAGS) -MT xmodmap-pf.obj -MD -MP -MF "$(DEPDIR)/xmodmap-pf.Tpo" -c -o xmodmap-pf.obj `if test -f 'pf.c'; then $(CYGPATH_W) 'pf.c'; else $(CYGPATH_W) '$(srcdir)/pf.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xmodmap-pf.Tpo" "$(DEPDIR)/xmodmap-pf.Po"; else rm -f "$(DEPDIR)/xmodmap-pf.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='pf.c' object='xmodmap-pf.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xmodmap_CFLAGS) $(CFLAGS) -c -o xmodmap-pf.obj `if test -f 'pf.c'; then $(CYGPATH_W) 'pf.c'; else $(CYGPATH_W) '$(srcdir)/pf.c'; fi` - -xmodmap-xmodmap.o: xmodmap.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xmodmap_CFLAGS) $(CFLAGS) -MT xmodmap-xmodmap.o -MD -MP -MF "$(DEPDIR)/xmodmap-xmodmap.Tpo" -c -o xmodmap-xmodmap.o `test -f 'xmodmap.c' || echo '$(srcdir)/'`xmodmap.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xmodmap-xmodmap.Tpo" "$(DEPDIR)/xmodmap-xmodmap.Po"; else rm -f "$(DEPDIR)/xmodmap-xmodmap.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='xmodmap.c' object='xmodmap-xmodmap.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xmodmap_CFLAGS) $(CFLAGS) -c -o xmodmap-xmodmap.o `test -f 'xmodmap.c' || echo '$(srcdir)/'`xmodmap.c - -xmodmap-xmodmap.obj: xmodmap.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xmodmap_CFLAGS) $(CFLAGS) -MT xmodmap-xmodmap.obj -MD -MP -MF "$(DEPDIR)/xmodmap-xmodmap.Tpo" -c -o xmodmap-xmodmap.obj `if test -f 'xmodmap.c'; then $(CYGPATH_W) 'xmodmap.c'; else $(CYGPATH_W) '$(srcdir)/xmodmap.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xmodmap-xmodmap.Tpo" "$(DEPDIR)/xmodmap-xmodmap.Po"; else rm -f "$(DEPDIR)/xmodmap-xmodmap.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='xmodmap.c' object='xmodmap-xmodmap.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xmodmap_CFLAGS) $(CFLAGS) -c -o xmodmap-xmodmap.obj `if test -f 'xmodmap.c'; then $(CYGPATH_W) 'xmodmap.c'; else $(CYGPATH_W) '$(srcdir)/xmodmap.c'; fi` -uninstall-info-am: install-appmanDATA: $(appman_DATA) @$(NORMAL_INSTALL) - test -z "$(appmandir)" || $(mkdir_p) "$(DESTDIR)$(appmandir)" + test -z "$(appmandir)" || $(MKDIR_P) "$(DESTDIR)$(appmandir)" @list='$(appman_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ @@ -479,23 +428,22 @@ distclean-tags: distdir: $(DISTFILES) $(am__remove_distdir) - mkdir $(distdir) - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ + test -d $(distdir) || mkdir $(distdir) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ @@ -506,10 +454,13 @@ distdir: $(DISTFILES) || exit 1; \ fi; \ done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-hook -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz @@ -584,7 +535,7 @@ distcheck: dist $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ @@ -608,7 +559,7 @@ check: check-am all-am: Makefile $(PROGRAMS) $(DATA) config.h installdirs: for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appmandir)"; do \ - test -z "$$dir" || $(mkdir_p) "$$dir"; \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am @@ -635,6 +586,7 @@ distclean-generic: maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-am clean-am: clean-binPROGRAMS clean-generic mostlyclean-am @@ -658,12 +610,20 @@ info-am: install-data-am: install-appmanDATA +install-dvi: install-dvi-am + install-exec-am: install-binPROGRAMS +install-html: install-html-am + install-info: install-info-am install-man: +install-pdf: install-pdf-am + +install-ps: install-ps-am + installcheck-am: maintainer-clean: maintainer-clean-am @@ -685,27 +645,39 @@ ps: ps-am ps-am: -uninstall-am: uninstall-appmanDATA uninstall-binPROGRAMS \ - uninstall-info-am +uninstall-am: uninstall-appmanDATA uninstall-binPROGRAMS + +.MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \ clean-binPROGRAMS clean-generic ctags dist dist-all dist-bzip2 \ - dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \ - distclean-compile distclean-generic distclean-hdr \ + dist-gzip dist-hook dist-shar dist-tarZ dist-zip distcheck \ + distclean distclean-compile distclean-generic distclean-hdr \ distclean-tags distcleancheck distdir distuninstallcheck dvi \ dvi-am html html-am info info-am install install-am \ install-appmanDATA install-binPROGRAMS install-data \ - install-data-am install-exec install-exec-am install-info \ - install-info-am install-man install-strip installcheck \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ - uninstall-am uninstall-appmanDATA uninstall-binPROGRAMS \ - uninstall-info-am + uninstall-am uninstall-appmanDATA uninstall-binPROGRAMS .man.$(APP_MAN_SUFFIX): sed $(MAN_SUBSTS) < $< > $@ + +.PHONY: ChangeLog + +ChangeLog: + (GIT_DIR=$(top_srcdir)/.git git-log > .changelog.tmp && mv .changelog.tmp ChangeLog; rm -f .changelog.tmp) || (touch ChangeLog; echo 'git directory not found: installing possibly empty changelog.' >&2) + +dist-hook: ChangeLog + +@LINT_TRUE@lint: +@LINT_TRUE@ $(LINT) $(ALL_LINT_FLAGS) $(AM_CFLAGS) $(xmodmap_SOURCES) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/xmodmap/aclocal.m4 b/xmodmap/aclocal.m4 index f17e720..3b51a56 100644 --- a/xmodmap/aclocal.m4 +++ b/xmodmap/aclocal.m4 @@ -1,7 +1,7 @@ -# generated automatically by aclocal 1.9.6 -*- Autoconf -*- +# generated automatically by aclocal 1.10 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005 Free Software Foundation, Inc. +# 2005, 2006 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -11,163 +11,895 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -# -# Copyright © 2004 Scott James Remnant . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. +m4_if(m4_PACKAGE_VERSION, [2.61],, +[m4_fatal([this file was generated for autoconf 2.61. +You have another version of autoconf. If you want to use that, +you should regenerate the build system entirely.], [63])]) -# PKG_PROG_PKG_CONFIG([MIN-VERSION]) -# ---------------------------------- -AC_DEFUN([PKG_PROG_PKG_CONFIG], -[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) -m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) -AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=m4_default([$1], [0.9.0]) - AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - PKG_CONFIG="" - fi - -fi[]dnl -])# PKG_PROG_PKG_CONFIG - -# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +# Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc. # -# Check to see whether a particular set of modules exists. Similar -# to PKG_CHECK_MODULES(), but does not set variables or print errors. -# -# -# Similar to PKG_CHECK_MODULES, make sure that the first instance of -# this or PKG_CHECK_MODULES is called, or make sure to call -# PKG_CHECK_EXISTS manually -# -------------------------------------------------------------- -AC_DEFUN([PKG_CHECK_EXISTS], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -if test -n "$PKG_CONFIG" && \ - AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then - m4_ifval([$2], [$2], [:]) -m4_ifvaln([$3], [else - $3])dnl -fi]) +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.10' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.10], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) -# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) -# --------------------------------------------- -m4_define([_PKG_CONFIG], -[if test -n "$PKG_CONFIG"; then - if test -n "$$1"; then - pkg_cv_[]$1="$$1" - else - PKG_CHECK_EXISTS([$3], - [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], - [pkg_failed=yes]) - fi -else - pkg_failed=untried -fi[]dnl -])# _PKG_CONFIG - -# _PKG_SHORT_ERRORS_SUPPORTED +# _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- -AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.10])dnl +_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' else - _pkg_short_errors_supported=no -fi[]dnl -])# _PKG_SHORT_ERRORS_SUPPORTED + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) - -# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -# [ACTION-IF-NOT-FOUND]) +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 +# Free Software Foundation, Inc. # +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 9 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. # -# Note that if there is a possibility the first call to -# PKG_CHECK_MODULES might not happen, you should be sure to include an -# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac -# -# -# -------------------------------------------------------------- -AC_DEFUN([PKG_CHECK_MODULES], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl -AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl -pkg_failed=no -AC_MSG_CHECKING([for $1]) +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], UPC, [depcc="$UPC" am_compiler_list=], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) -_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) -_PKG_CONFIG([$1][_LIBS], [libs], [$2]) +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub -m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS -and $1[]_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details.]) + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf -if test $pkg_failed = yes; then - _PKG_SHORT_ERRORS_SUPPORTED - if test $_pkg_short_errors_supported = yes; then - $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` - else - $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` - fi - # Put the nasty error message in config.log where it belongs - echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done - ifelse([$4], , [AC_MSG_ERROR(dnl -[Package requirements ($2) were not met: - -$$1_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -_PKG_TEXT -])], - [AC_MSG_RESULT([no]) - $4]) -elif test $pkg_failed = untried; then - ifelse([$4], , [AC_MSG_FAILURE(dnl -[The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -_PKG_TEXT - -To get pkg-config, see .])], - [$4]) + cd .. + rm -rf conftest.dir else - $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS - $1[]_LIBS=$pkg_cv_[]$1[]_LIBS - AC_MSG_RESULT([yes]) - ifelse([$3], , :, [$3]) -fi[]dnl -])# PKG_CHECK_MODULES + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +#serial 3 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. +AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 12 + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.60])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_PROG_INSTALL_SH +AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES(OBJC)], + [define([AC_PROG_OBJC], + defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl +]) +]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $1 | $1:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} +AC_SUBST(install_sh)]) + +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- +# From Jim Meyering + +# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +AC_DEFUN([AM_MAINTAINER_MODE], +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) + +# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_MKDIR_P +# --------------- +# Check for `mkdir -p'. +AC_DEFUN([AM_PROG_MKDIR_P], +[AC_PREREQ([2.60])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +dnl while keeping a definition of mkdir_p for backward compatibility. +dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +dnl Makefile.ins that do not define MKDIR_P, so we do our own +dnl adjustment using top_builddir (which is defined more often than +dnl MKDIR_P). +AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +case $mkdir_p in + [[\\/$]]* | ?:[[\\/]]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR dnl dnl Copyright 2005-2006 Sun Microsystems, Inc. All rights reserved. @@ -653,881 +1385,135 @@ AC_DEFUN([XORG_RELEASE_VERSION],[ [Patch version of this package]) ]) -# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. +# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +# +# Copyright © 2004 Scott James Remnant . # -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION so it can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.9.6])]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. # -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. # -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. -AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 7 - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE]) -AC_SUBST([$1_FALSE]) -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 8 - -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "GCJ", or "OBJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH]) -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -#serial 3 - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 8 - -# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. -AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 12 - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.58])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP -AC_REQUIRE([AM_PROG_MKDIR_P])dnl -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -]) -]) - - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $1 | $1:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"$am_aux_dir/install-sh"} -AC_SUBST(install_sh)]) - -# Copyright (C) 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- -# From Jim Meyering - -# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 4 - -AC_DEFUN([AM_MAINTAINER_MODE], -[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) - dnl maintainer-mode is disabled by default - AC_ARG_ENABLE(maintainer-mode, -[ --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer], - USE_MAINTAINER_MODE=$enableval, - USE_MAINTAINER_MODE=no) - AC_MSG_RESULT([$USE_MAINTAINER_MODE]) - AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) - MAINT=$MAINTAINER_MODE_TRUE - AC_SUBST(MAINT)dnl -] -) - -AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 3 - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo done -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 4 - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) -fi -]) - -# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_MKDIR_P -# --------------- -# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. -# -# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories -# created by `make install' are always world readable, even if the -# installer happens to have an overly restrictive umask (e.g. 077). -# This was a mistake. There are at least two reasons why we must not -# use `-m 0755': -# - it causes special bits like SGID to be ignored, -# - it may be too restrictive (some setups expect 775 directories). -# -# Do not use -m 0755 and let people choose whatever they expect by -# setting umask. -# -# We cannot accept any implementation of `mkdir' that recognizes `-p'. -# Some implementations (such as Solaris 8's) are not thread-safe: if a -# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' -# concurrently, both version can detect that a/ is missing, but only -# one can create it and the other will error out. Consequently we -# restrict ourselves to GNU make (using the --version option ensures -# this.) -AC_DEFUN([AM_PROG_MKDIR_P], -[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # We used to keeping the `.' as first argument, in order to - # allow $(mkdir_p) to be used without argument. As in - # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. However this is wrong - # for two reasons: - # 1. if the package is installed by a user who cannot write `.' - # make install will fail, - # 2. the above comment should most certainly read - # $(mkdir_p) $(DESTDIR)$(somedir) - # so it does not work when $(somedir) is undefined and - # $(DESTDIR) is not. - # To support the latter case, we have to write - # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), - # so the `.' trick is pointless. - mkdir_p='mkdir -p --' -else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - for d in ./-p ./--version; - do - test -d $d && rmdir $d - done - # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. - if test -f "$ac_aux_dir/mkinstalldirs"; then - mkdir_p='$(mkinstalldirs)' - else - mkdir_p='$(install_sh) -d' - fi -fi -AC_SUBST([mkdir_p])]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 3 - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# ------------------------------ -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) - -# _AM_SET_OPTIONS(OPTIONS) +# PKG_PROG_PKG_CONFIG([MIN-VERSION]) # ---------------------------------- -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) +AC_DEFUN([PKG_PROG_PKG_CONFIG], +[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) +m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) +AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=m4_ifval([$1], [$1], [0.9.0]) + AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + PKG_CONFIG="" + fi + +fi[]dnl +])# PKG_PROG_PKG_CONFIG -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 -# Free Software Foundation, Inc. +# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. +# Check to see whether a particular set of modules exists. Similar +# to PKG_CHECK_MODULES(), but does not set variables or print errors. +# +# +# Similar to PKG_CHECK_MODULES, make sure that the first instance of +# this or PKG_CHECK_MODULES is called, or make sure to call +# PKG_CHECK_EXISTS manually +# -------------------------------------------------------------- +AC_DEFUN([PKG_CHECK_EXISTS], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +if test -n "$PKG_CONFIG" && \ + AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then + m4_ifval([$2], [$2], [:]) +m4_ifvaln([$3], [else + $3])dnl +fi]) -# serial 4 -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "$[2]" = conftest.file - ) -then - # Ok. - : +# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) +# --------------------------------------------- +m4_define([_PKG_CONFIG], +[if test -n "$PKG_CONFIG"; then + PKG_CHECK_EXISTS([$3], + [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], + [pkg_failed=yes]) else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT(yes)]) + pkg_failed=untried +fi[]dnl +])# _PKG_CONFIG -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +# [ACTION-IF-NOT-FOUND]) # -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor `install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004, 2005 Free Software Foundation, Inc. # -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of `v7', `ustar', or `pax'. +# Note that if there is a possibility the first call to +# PKG_CHECK_MODULES might not happen, you should be sure to include an +# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac # -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar # -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. -AM_MISSING_PROG([AMTAR], [tar]) -m4_if([$1], [v7], - [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], - [m4_case([$1], [ustar],, [pax],, - [m4_fatal([Unknown tar format])]) -AC_MSG_CHECKING([how to create a $1 tar archive]) -# Loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' -_am_tools=${am_cv_prog_tar_$1-$_am_tools} -# Do not fold the above two line into one, because Tru64 sh and -# Solaris sh will not grok spaces in the rhs of `-'. -for _am_tool in $_am_tools -do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; - do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac +# -------------------------------------------------------------- +AC_DEFUN([PKG_CHECK_MODULES], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl +AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break +pkg_failed=no +AC_MSG_CHECKING([for $1]) - # tar/untar a dummy directory, and stop if the command works - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi -done -rm -rf conftest.dir +_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) +_PKG_CONFIG([$1][_LIBS], [libs], [$2]) -AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) -AC_MSG_RESULT([$am_cv_prog_tar_$1])]) -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR +if test $pkg_failed = yes; then + $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` + # Put the nasty error message in config.log where it belongs + echo "$$1[]_PKG_ERRORS" 1>&AS_MESSAGE_LOG_FD + + ifelse([$4], , [AC_MSG_ERROR(dnl +[Package requirements ($2) were not met. +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively you may set the $1_CFLAGS and $1_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details.])], + [$4]) +elif test $pkg_failed = untried; then + ifelse([$4], , [AC_MSG_FAILURE(dnl +[The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively you may set the $1_CFLAGS and $1_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details. + +To get pkg-config, see .])], + [$4]) +else + $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS + $1[]_LIBS=$pkg_cv_[]$1[]_LIBS + AC_MSG_RESULT([yes]) + ifelse([$3], , :, [$3]) +fi[]dnl +])# PKG_CHECK_MODULES diff --git a/xmodmap/autogen.sh b/xmodmap/autogen.sh new file mode 100755 index 0000000..e81f989 --- /dev/null +++ b/xmodmap/autogen.sh @@ -0,0 +1,13 @@ +#! /bin/sh + +srcdir=`dirname $0` +test -z "$srcdir" && srcdir=. + +ORIGDIR=`pwd` +cd $srcdir + +autoreconf -v --install || exit 1 +cd $ORIGDIR || exit $? + +$srcdir/configure --enable-maintainer-mode "$@" + diff --git a/xmodmap/compile b/xmodmap/compile deleted file mode 100755 index 1b1d232..0000000 --- a/xmodmap/compile +++ /dev/null @@ -1,142 +0,0 @@ -#! /bin/sh -# Wrapper for compilers which do not understand `-c -o'. - -scriptversion=2005-05-14.22 - -# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. -# Written by Tom Tromey . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# This file is maintained in Automake, please report -# bugs to or send patches to -# . - -case $1 in - '') - echo "$0: No command. Try \`$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: compile [--help] [--version] PROGRAM [ARGS] - -Wrapper for compilers which do not understand `-c -o'. -Remove `-o dest.o' from ARGS, run PROGRAM with the remaining -arguments, and rename the output as expected. - -If you are trying to build a whole package this is not the -right script to run: please start by reading the file `INSTALL'. - -Report bugs to . -EOF - exit $? - ;; - -v | --v*) - echo "compile $scriptversion" - exit $? - ;; -esac - -ofile= -cfile= -eat= - -for arg -do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as `compile cc -o foo foo.c'. - # So we strip `-o arg' only if arg is an object. - eat=1 - case $2 in - *.o | *.obj) - ofile=$2 - ;; - *) - set x "$@" -o "$2" - shift - ;; - esac - ;; - *.c) - cfile=$1 - set x "$@" "$1" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi - shift -done - -if test -z "$ofile" || test -z "$cfile"; then - # If no `-o' option was seen then we might have been invoked from a - # pattern rule where we don't need one. That is ok -- this is a - # normal compilation that the losing compiler can handle. If no - # `.c' file was seen then we are probably linking. That is also - # ok. - exec "$@" -fi - -# Name of file we expect compiler to create. -cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'` - -# Create the lock directory. -# Note: use `[/.-]' here to ensure that we don't use the same name -# that we are using for the .o file. Also, base the name on the expected -# object file name, since that is what matters with a parallel build. -lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d -while true; do - if mkdir "$lockdir" >/dev/null 2>&1; then - break - fi - sleep 1 -done -# FIXME: race condition here if user kills between mkdir and trap. -trap "rmdir '$lockdir'; exit 1" 1 2 15 - -# Run the compile. -"$@" -ret=$? - -if test -f "$cofile"; then - mv "$cofile" "$ofile" -elif test -f "${cofile}bj"; then - mv "${cofile}bj" "$ofile" -fi - -rmdir "$lockdir" -exit $ret - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End: diff --git a/xmodmap/config.guess b/xmodmap/config.guess index 0f0fe71..396482d 100755 --- a/xmodmap/config.guess +++ b/xmodmap/config.guess @@ -4,7 +4,7 @@ # 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, # Inc. -timestamp='2007-03-06' +timestamp='2006-07-02' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -161,7 +161,6 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched @@ -781,7 +780,7 @@ EOF i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; - *:MINGW*:*) + i*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:windows32*:*) @@ -791,15 +790,12 @@ EOF i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; - *:Interix*:[3456]*) - case ${UNAME_MACHINE} in - x86) - echo i586-pc-interix${UNAME_RELEASE} - exit ;; - EM64T | authenticamd) - echo x86_64-unknown-interix${UNAME_RELEASE} - exit ;; - esac ;; + x86:Interix*:[3456]*) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + EM64T:Interix*:[3456]*) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; @@ -954,9 +950,6 @@ EOF x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit ;; - xtensa:Linux:*:*) - echo xtensa-unknown-linux-gnu - exit ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent @@ -1215,15 +1208,6 @@ EOF SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux${UNAME_RELEASE} - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux${UNAME_RELEASE} - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux${UNAME_RELEASE} - exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; diff --git a/xmodmap/config.h.in b/xmodmap/config.h.in index 1ca4092..84dfaf1 100644 --- a/xmodmap/config.h.in +++ b/xmodmap/config.h.in @@ -1,5 +1,8 @@ /* config.h.in. Generated from configure.ac by autoheader. */ +/* Define to 1 if you have the `strncasecmp' function. */ +#undef HAVE_STRNCASECMP + /* Name of package */ #undef PACKAGE diff --git a/xmodmap/config.sub b/xmodmap/config.sub index 5defff6..fab0aa3 100755 --- a/xmodmap/config.sub +++ b/xmodmap/config.sub @@ -4,7 +4,7 @@ # 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, # Inc. -timestamp='2007-01-18' +timestamp='2006-09-20' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -245,12 +245,12 @@ case $basic_machine in | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ - | fido | fr30 | frv \ + | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | mcore | mep \ + | maxq | mb | microblaze | mcore \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ @@ -324,7 +324,7 @@ case $basic_machine in | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ - | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ @@ -925,9 +925,6 @@ case $basic_machine in basic_machine=sh-hitachi os=-hms ;; - sh5el) - basic_machine=sh5le-unknown - ;; sh64) basic_machine=sh64-unknown ;; @@ -1222,7 +1219,7 @@ case $os in | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) + | -skyos* | -haiku* | -rdos* | -toppers*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) @@ -1417,9 +1414,6 @@ case $basic_machine in m68*-cisco) os=-aout ;; - mep-*) - os=-elf - ;; mips*-cisco) os=-elf ;; diff --git a/xmodmap/configure b/xmodmap/configure index 13b4e5d..d104477 100755 --- a/xmodmap/configure +++ b/xmodmap/configure @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.61 for xmodmap 1.0.2. +# Generated by GNU Autoconf 2.61 for xmodmap 1.0.3. # # Report bugs to . # @@ -574,8 +574,8 @@ SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='xmodmap' PACKAGE_TARNAME='xmodmap' -PACKAGE_VERSION='1.0.2' -PACKAGE_STRING='xmodmap 1.0.2' +PACKAGE_VERSION='1.0.3' +PACKAGE_STRING='xmodmap 1.0.3' PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg' ac_subst_vars='SHELL @@ -618,6 +618,7 @@ target_alias INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA +am__isrc CYGPATH_W PACKAGE VERSION @@ -658,6 +659,10 @@ am__fastdepCC_FALSE PKG_CONFIG DEP_CFLAGS DEP_LIBS +LINT +LINT_FLAGS +LINT_TRUE +LINT_FALSE build build_cpu build_vendor @@ -1194,7 +1199,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures xmodmap 1.0.2 to adapt to many kinds of systems. +\`configure' configures xmodmap 1.0.3 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1264,7 +1269,7 @@ fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of xmodmap 1.0.2:";; + short | recursive ) echo "Configuration of xmodmap 1.0.3:";; esac cat <<\_ACEOF @@ -1279,6 +1284,8 @@ Optional Features: Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-lint Use a lint-style source code checker (default: + disabled) --with-release-version=STRING Use release version string in package name @@ -1358,7 +1365,7 @@ fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -xmodmap configure 1.0.2 +xmodmap configure 1.0.3 generated by GNU Autoconf 2.61 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, @@ -1372,7 +1379,7 @@ cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by xmodmap $as_me 1.0.2, which was +It was created by xmodmap $as_me 1.0.3, which was generated by GNU Autoconf 2.61. Invocation command line was $ $0 $@ @@ -1725,7 +1732,8 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $ ac_compiler_gnu=$ac_cv_c_compiler_gnu -am__api_version="1.9" +am__api_version='1.10' + ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then @@ -1908,38 +1916,53 @@ else echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi -if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # We used to keeping the `.' as first argument, in order to - # allow $(mkdir_p) to be used without argument. As in - # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. However this is wrong - # for two reasons: - # 1. if the package is installed by a user who cannot write `.' - # make install will fail, - # 2. the above comment should most certainly read - # $(mkdir_p) $(DESTDIR)$(somedir) - # so it does not work when $(somedir) is undefined and - # $(DESTDIR) is not. - # To support the latter case, we have to write - # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), - # so the `.' trick is pointless. - mkdir_p='mkdir -p --' +{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 +echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; } +if test -z "$MKDIR_P"; then + if test "${ac_cv_path_mkdir+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - for d in ./-p ./--version; - do - test -d $d && rmdir $d - done - # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. - if test -f "$ac_aux_dir/mkinstalldirs"; then - mkdir_p='$(mkinstalldirs)' + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done +done +IFS=$as_save_IFS + +fi + + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" else - mkdir_p='$(install_sh) -d' + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + test -d ./--version && rmdir ./--version + MKDIR_P="$ac_install_sh -d" fi fi +{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5 +echo "${ECHO_T}$MKDIR_P" >&6; } + +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac for ac_prog in gawk mawk nawk awk do @@ -2022,12 +2045,16 @@ else fi rmdir .tst 2>/dev/null -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } + fi fi # test whether we have cygpath @@ -2042,7 +2069,7 @@ fi # Define the identity of the package. PACKAGE='xmodmap' - VERSION='1.0.2' + VERSION='1.0.3' cat >>confdefs.h <<_ACEOF @@ -2070,7 +2097,7 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} -install_sh=${install_sh-"$am_aux_dir/install-sh"} +install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right @@ -2174,7 +2201,7 @@ else fi fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" # We need awk for the "check" target. The system "awk" is bad on # some platforms. @@ -2199,9 +2226,7 @@ fi { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } - - -if test $USE_MAINTAINER_MODE = yes; then + if test $USE_MAINTAINER_MODE = yes; then MAINTAINER_MODE_TRUE= MAINTAINER_MODE_FALSE='#' else @@ -3187,9 +3212,7 @@ if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi - - -if test "x$enable_dependency_tracking" != xno; then + if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else @@ -3199,7 +3222,6 @@ fi - depcc="$CC" am_compiler_list= { echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 @@ -3267,6 +3289,7 @@ else depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then @@ -3296,9 +3319,7 @@ fi echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - -if + if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= @@ -3390,6 +3411,102 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + +for ac_func in strncasecmp +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval echo '${'$as_ac_var'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + # Checks for pkg-config packages @@ -3517,9 +3634,6 @@ pkg_failed=no echo $ECHO_N "checking for DEP... $ECHO_C" >&6; } if test -n "$PKG_CONFIG"; then - if test -n "$DEP_CFLAGS"; then - pkg_cv_DEP_CFLAGS="$DEP_CFLAGS" - else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11\"") >&5 ($PKG_CONFIG --exists --print-errors "x11") 2>&5 @@ -3530,14 +3644,10 @@ if test -n "$PKG_CONFIG"; then else pkg_failed=yes fi - fi else pkg_failed=untried fi if test -n "$PKG_CONFIG"; then - if test -n "$DEP_LIBS"; then - pkg_cv_DEP_LIBS="$DEP_LIBS" - else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11\"") >&5 ($PKG_CONFIG --exists --print-errors "x11") 2>&5 @@ -3548,59 +3658,38 @@ if test -n "$PKG_CONFIG"; then else pkg_failed=yes fi - fi else pkg_failed=untried fi - - if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - DEP_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "x11"` - else - DEP_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "x11"` - fi + DEP_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "x11"` # Put the nasty error message in config.log where it belongs - echo "$DEP_PKG_ERRORS" >&5 - - { { echo "$as_me:$LINENO: error: Package requirements (x11) were not met: - -$DEP_PKG_ERRORS + echo "$DEP_PKG_ERRORS" 1>&5 + { { echo "$as_me:$LINENO: error: Package requirements (x11) were not met. Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. -Alternatively, you may set the environment variables DEP_CFLAGS -and DEP_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -echo "$as_me: error: Package requirements (x11) were not met: - -$DEP_PKG_ERRORS - +Alternatively you may set the DEP_CFLAGS and DEP_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details." >&5 +echo "$as_me: error: Package requirements (x11) were not met. Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. -Alternatively, you may set the environment variables DEP_CFLAGS -and DEP_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} +Alternatively you may set the DEP_CFLAGS and DEP_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details." >&2;} { (exit 1); exit 1; }; } elif test $pkg_failed = untried; then { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. -Alternatively, you may set the environment variables DEP_CFLAGS -and DEP_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. +Alternatively you may set the DEP_CFLAGS and DEP_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details. To get pkg-config, see . See \`config.log' for more details." >&5 @@ -3608,9 +3697,9 @@ echo "$as_me: error: The pkg-config script could not be found or is too old. Ma is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. -Alternatively, you may set the environment variables DEP_CFLAGS -and DEP_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. +Alternatively you may set the DEP_CFLAGS and DEP_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details. To get pkg-config, see . See \`config.log' for more details." >&2;} @@ -3625,6 +3714,47 @@ fi + + +# Allow checking code with lint, sparse, etc. + +# Check whether --with-lint was given. +if test "${with_lint+set}" = set; then + withval=$with_lint; use_lint=$withval +else + use_lint=no +fi + +if test "x$use_lint" = "xyes" ; then + LINT="lint" +else + LINT="$use_lint" +fi +if test "x$LINT_FLAGS" = "x" -a "x$LINT" != "xno" ; then + case $LINT in + lint|*/lint) + case $host_os in + solaris*) + LINT_FLAGS="-u -b -h -erroff=E_INDISTING_FROM_TRUNC2" + ;; + esac + ;; + esac +fi + + + + if test x$LINT != xno; then + LINT_TRUE= + LINT_FALSE='#' +else + LINT_TRUE='#' + LINT_FALSE= +fi + + + + # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 @@ -3938,6 +4068,13 @@ echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi +if test -z "${LINT_TRUE}" && test -z "${LINT_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"LINT\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"LINT\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files @@ -4238,7 +4375,7 @@ exec 6>&1 # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by xmodmap $as_me 1.0.2, which was +This file was extended by xmodmap $as_me 1.0.3, which was generated by GNU Autoconf 2.61. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -4291,7 +4428,7 @@ Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ -xmodmap config.status 1.0.2 +xmodmap config.status 1.0.3 configured by $0, generated by GNU Autoconf 2.61, with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" @@ -4302,6 +4439,7 @@ gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF @@ -4509,6 +4647,7 @@ target_alias!$target_alias$ac_delim INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim INSTALL_DATA!$INSTALL_DATA$ac_delim +am__isrc!$am__isrc$ac_delim CYGPATH_W!$CYGPATH_W$ac_delim PACKAGE!$PACKAGE$ac_delim VERSION!$VERSION$ac_delim @@ -4549,6 +4688,10 @@ am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim PKG_CONFIG!$PKG_CONFIG$ac_delim DEP_CFLAGS!$DEP_CFLAGS$ac_delim DEP_LIBS!$DEP_LIBS$ac_delim +LINT!$LINT$ac_delim +LINT_FLAGS!$LINT_FLAGS$ac_delim +LINT_TRUE!$LINT_TRUE$ac_delim +LINT_FALSE!$LINT_FALSE$ac_delim build!$build$ac_delim build_cpu!$build_cpu$ac_delim build_vendor!$build_vendor$ac_delim @@ -4561,11 +4704,6 @@ APP_MAN_SUFFIX!$APP_MAN_SUFFIX$ac_delim LIB_MAN_SUFFIX!$LIB_MAN_SUFFIX$ac_delim FILE_MAN_SUFFIX!$FILE_MAN_SUFFIX$ac_delim MISC_MAN_SUFFIX!$MISC_MAN_SUFFIX$ac_delim -DRIVER_MAN_SUFFIX!$DRIVER_MAN_SUFFIX$ac_delim -ADMIN_MAN_SUFFIX!$ADMIN_MAN_SUFFIX$ac_delim -APP_MAN_DIR!$APP_MAN_DIR$ac_delim -LIB_MAN_DIR!$LIB_MAN_DIR$ac_delim -FILE_MAN_DIR!$FILE_MAN_DIR$ac_delim _ACEOF if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then @@ -4607,6 +4745,11 @@ _ACEOF ac_delim='%!_!# ' for ac_last_try in false false false false false :; do cat >conf$$subs.sed <<_ACEOF +DRIVER_MAN_SUFFIX!$DRIVER_MAN_SUFFIX$ac_delim +ADMIN_MAN_SUFFIX!$ADMIN_MAN_SUFFIX$ac_delim +APP_MAN_DIR!$APP_MAN_DIR$ac_delim +LIB_MAN_DIR!$LIB_MAN_DIR$ac_delim +FILE_MAN_DIR!$FILE_MAN_DIR$ac_delim MISC_MAN_DIR!$MISC_MAN_DIR$ac_delim DRIVER_MAN_DIR!$DRIVER_MAN_DIR$ac_delim ADMIN_MAN_DIR!$ADMIN_MAN_DIR$ac_delim @@ -4614,7 +4757,7 @@ LIBOBJS!$LIBOBJS$ac_delim LTLIBOBJS!$LTLIBOBJS$ac_delim _ACEOF - if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 5; then + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 10; then break elif $ac_last_try; then { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 @@ -4841,6 +4984,11 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF @@ -4894,6 +5042,7 @@ s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out @@ -5058,8 +5207,9 @@ echo "$as_me: executing $ac_file commands" >&6;} # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ diff --git a/xmodmap/configure.ac b/xmodmap/configure.ac index 21ad812..1b567d7 100644 --- a/xmodmap/configure.ac +++ b/xmodmap/configure.ac @@ -22,7 +22,7 @@ dnl dnl Process this file with autoconf to create configure. AC_PREREQ([2.57]) -AC_INIT(xmodmap,[1.0.2], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg],xmodmap) +AC_INIT(xmodmap,[1.0.3], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg],xmodmap) AM_INIT_AUTOMAKE([dist-bzip2]) AM_MAINTAINER_MODE @@ -31,11 +31,16 @@ AM_CONFIG_HEADER(config.h) AC_PROG_CC AC_PROG_INSTALL +AC_CHECK_FUNCS([strncasecmp]) + # Checks for pkg-config packages PKG_CHECK_MODULES(DEP, x11) AC_SUBST(DEP_CFLAGS) AC_SUBST(DEP_LIBS) +dnl Allow checking code with lint, sparse, etc. +XORG_WITH_LINT + XORG_MANPAGE_SECTIONS XORG_RELEASE_VERSION diff --git a/xmodmap/depcomp b/xmodmap/depcomp index 04701da..ca5ea4e 100755 --- a/xmodmap/depcomp +++ b/xmodmap/depcomp @@ -1,9 +1,10 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2005-07-09.11 +scriptversion=2006-10-15.18 -# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software +# Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -91,7 +92,20 @@ gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. - "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" stat=$? if test $stat -eq 0; then : else @@ -276,6 +290,46 @@ icc) rm -f "$tmpdepfile" ;; +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" + # Add `dependent.h:' lines. + sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. @@ -288,13 +342,13 @@ tru64) if test "$libtool" = yes; then # With Tru64 cc, shared objects can also be used to make a - # static library. This mecanism is used in libtool 1.4 series to + # static library. This mechanism is used in libtool 1.4 series to # handle both shared and static libraries in a single compilation. # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. # # With libtool 1.5 this exception was removed, and libtool now # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in in $dir.libs/$base.o.d and + # compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is diff --git a/xmodmap/handle.c b/xmodmap/handle.c index 1cb2a43..5d457b4 100644 --- a/xmodmap/handle.c +++ b/xmodmap/handle.c @@ -28,6 +28,7 @@ from The Open Group. */ /* $XFree86: xc/programs/xmodmap/handle.c,v 3.6 2001/07/25 15:05:27 dawes Exp $ */ +#include "config.h" #include #include #include @@ -78,7 +79,7 @@ KeysymToKeycodes(Display *dpy, KeySym keysym, int *pnum_kcs) } static char * -copy_to_scratch(char *s, int len) +copy_to_scratch(const char *s, int len) { static char *buf = NULL; static int buflen = 0; @@ -121,19 +122,19 @@ initialize_map (void) static void do_keycode ( char *line, int len ); static void do_keysym ( char *line, int len ); -static void finish_keycodes ( char *line, int len, KeyCode *keycodes, +static void finish_keycodes ( const char *line, int len, KeyCode *keycodes, int count ); static void do_add ( char *line, int len ); static void do_remove ( char *line, int len ); static void do_clear ( char *line, int len ); static void do_pointer ( char *line, int len ); -static int get_keysym_list ( char *line, int len, int *np, KeySym **kslistp ); +static int get_keysym_list ( const char *line, int len, int *np, KeySym **kslistp ); static void print_opcode(union op *op); -static int skip_word ( char *s, int len ); -static int skip_chars ( char *s, int len ); -static int skip_space ( char *s, int len ); +static int skip_word ( const char *s, int len ); +static int skip_chars ( const char *s, int len ); +static int skip_space ( const char *s, int len ); static struct dt { char *command; /* name of input command */ @@ -188,7 +189,7 @@ handle_line(char *line, /* string to parse */ */ static int -skip_word (char *s, int len) +skip_word (const char *s, int len) { register int n; @@ -197,7 +198,7 @@ skip_word (char *s, int len) } static int -skip_chars(char *s, int len) +skip_chars(const char *s, int len) { register int i; @@ -210,7 +211,7 @@ skip_chars(char *s, int len) } static int -skip_space(char *s, int len) +skip_space(const char *s, int len) { register int i; @@ -224,7 +225,7 @@ skip_space(char *s, int len) static int -skip_until_char(char *s, int len, char c) +skip_until_char(const char *s, int len, char c) { register int i; @@ -234,24 +235,6 @@ skip_until_char(char *s, int len, char c) return (i); } -#if 0 -static int -skip_until_chars(char *s, int len, char *cs, int cslen) -{ - int i; - - for (i = 0; i < len; i++) { - register int j; - register char c = s[i]; - - for (j = 0; j < cslen; j++) { - if (c == cs[j]) goto done; - } - } - done: - return (i); -} -#endif /* * The action routines. @@ -284,23 +267,8 @@ add_to_work_queue(union op *p) /* this can become a macro someday */ return; } -#if 0 -static char * -copystring(char *s, int len) -{ - char *retval; - - retval = (char *) malloc (len+1); - if (retval) { - strncpy (retval, s, len); - retval[len] = '\0'; - } - return (retval); -} -#endif - static Bool -parse_number(char *str, unsigned long *val) +parse_number(const char *str, unsigned long *val) { char *fmt = "%ld"; @@ -320,7 +288,7 @@ parse_number(char *str, unsigned long *val) } static Bool -parse_keysym(char *line, int n, char **name, KeySym *keysym) +parse_keysym(const char *line, int n, char **name, KeySym *keysym) { *name = copy_to_scratch (line, n); if (!strcmp(*name, "NoSymbol")) { @@ -433,7 +401,7 @@ do_keysym(char *line, int len) } static void -finish_keycodes(char *line, int len, KeyCode *keycodes, int count) +finish_keycodes(const char *line, int len, KeyCode *keycodes, int count) { int n; KeySym *kslist; @@ -824,8 +792,9 @@ do_clear(char *line, int len) add_to_work_queue (uop); } +#ifndef HAVE_STRNCASECMP static int -strncmp_nocase(char *a, char *b, int n) +strncasecmp(const char *a, const char *b, int n) { int i; int a1, b1; @@ -842,7 +811,7 @@ strncmp_nocase(char *a, char *b, int n) } return 0; } - +#endif /* * do_pointer = get list of numbers of the form @@ -884,7 +853,7 @@ do_pointer(char *line, int len) line += n, len -= n; i = 0; - if (len < 7 || strncmp_nocase (line, "default", 7) != 0) { + if (len < 7 || strncasecmp (line, "default", 7) != 0) { while (len > 0) { n = skip_space (line, len); line += n, len -= n; @@ -941,7 +910,7 @@ do_pointer(char *line, int len) */ static int -get_keysym_list(char *line, int len, int *np, KeySym **kslistp) +get_keysym_list(const char *line, int len, int *np, KeySym **kslistp) { int havesofar, maxcanhave; KeySym *keysymlist; @@ -972,6 +941,7 @@ get_keysym_list(char *line, int len, int *np, KeySym **kslistp) n = skip_chars (line, len); if (n < 0) { badmsg0 ("keysym name list"); + free(keysymlist); return (-1); } @@ -990,12 +960,14 @@ get_keysym_list(char *line, int len, int *np, KeySym **kslistp) /* grow the list bigger if necessary */ if (havesofar >= maxcanhave) { + KeySym *origkeysymlist = keysymlist; maxcanhave *= 2; keysymlist = (KeySym *) realloc (keysymlist, maxcanhave * sizeof (KeySym)); if (!keysymlist) { badmsg ("attempt to grow keysym list to %ld bytes", (long) (maxcanhave * sizeof (KeySym))); + free(origkeysymlist); return (-1); } } diff --git a/xmodmap/install-sh b/xmodmap/install-sh index 4d4a951..4fbbae7 100755 --- a/xmodmap/install-sh +++ b/xmodmap/install-sh @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2005-05-14.22 +scriptversion=2006-10-14.15 # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -39,15 +39,24 @@ scriptversion=2005-05-14.22 # when there is no Makefile. # # This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. +# from scratch. + +nl=' +' +IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi -# put in absolute paths if you don't have them in your path; or use env. vars. +# Put in absolute file names if you don't have them in your path; +# or use environment vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" @@ -58,7 +67,13 @@ stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" -chmodcmd="$chmodprog 0755" +posix_glob= +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chmodcmd=$chmodprog chowncmd= chgrpcmd= stripcmd= @@ -95,7 +110,7 @@ Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " -while test -n "$1"; do +while test $# -ne 0; do case $1 in -c) shift continue;; @@ -111,9 +126,15 @@ while test -n "$1"; do --help) echo "$usage"; exit $?;; - -m) chmodcmd="$chmodprog $2" + -m) mode=$2 shift shift + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac continue;; -o) chowncmd="$chownprog $2" @@ -136,25 +157,33 @@ while test -n "$1"; do --version) echo "$0 $scriptversion"; exit $?;; - *) # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - test -n "$dir_arg$dstarg" && break - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dstarg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dstarg" - shift # fnord - fi - shift # arg - dstarg=$arg - done + --) shift break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; esac done -if test -z "$1"; then +if test $# -ne 0 && test -z "$dir_arg$dstarg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dstarg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dstarg" + shift # fnord + fi + shift # arg + dstarg=$arg + done +fi + +if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 @@ -164,6 +193,33 @@ if test -z "$1"; then exit 0 fi +if test -z "$dir_arg"; then + trap '(exit $?); exit' 1 2 13 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + for src do # Protect names starting with `-'. @@ -173,15 +229,11 @@ do if test -n "$dir_arg"; then dst=$src - src= - - if test -d "$dst"; then - mkdircmd=: - chmodcmd= - else - mkdircmd=$mkdirprog - fi + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? else + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. @@ -208,53 +260,188 @@ do echo "$0: $dstarg: Is a directory" >&2 exit 1 fi - dst=$dst/`basename "$src"` + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? fi fi - # This sed command emulates the dirname command. - dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` + obsolete_mkdir_used=false - # Make sure that the destination directory exists. + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - # Skip lots of stat calls in the usual case. - if test ! -d "$dstdir"; then - defaultIFS=' - ' - IFS="${IFS-$defaultIFS}" + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac - oIFS=$IFS - # Some sh's can't handle IFS=/ for some reason. - IFS='%' - set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` - shift - IFS=$oIFS + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi - pathcomp= + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - while test $# -ne 0 ; do - pathcomp=$pathcomp$1 + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix=/ ;; + -*) prefix=./ ;; + *) prefix= ;; + esac + + case $posix_glob in + '') + if (set -f) 2>/dev/null; then + posix_glob=true + else + posix_glob=false + fi ;; + esac + + oIFS=$IFS + IFS=/ + $posix_glob && set -f + set fnord $dstdir shift - if test ! -d "$pathcomp"; then - $mkdirprog "$pathcomp" - # mkdir can fail with a `File exist' error in case several - # install-sh are creating the directory concurrently. This - # is OK. - test -d "$pathcomp" || exit + $posix_glob && set +f + IFS=$oIFS + + prefixes= + + for d + do + test -z "$d" && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true fi - pathcomp=$pathcomp/ - done + fi fi if test -n "$dir_arg"; then - $doit $mkdircmd "$dst" \ - && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } - + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else - dstfile=`basename "$dst"` # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ @@ -262,10 +449,9 @@ do # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - trap '(exit $?); exit' 1 2 13 15 # Copy the file name to the temp name. - $doit $cpprog "$src" "$dsttmp" && + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # @@ -276,10 +462,10 @@ do { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && + && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # Now rename the file to the real destination. - { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ + { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \ || { # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not @@ -291,11 +477,12 @@ do # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { - if test -f "$dstdir/$dstfile"; then - $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ - || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ + if test -f "$dst"; then + $doit $rmcmd -f "$dst" 2>/dev/null \ + || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \ + && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\ || { - echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } else @@ -304,16 +491,13 @@ do } && # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" + $doit $mvcmd "$dsttmp" "$dst" } - } - fi || { (exit 1); exit 1; } -done + } || exit 1 -# The final little trick to "correctly" pass the exit status to the exit trap. -{ - (exit 0); exit 0 -} + trap '' 0 + fi +done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) diff --git a/xmodmap/missing b/xmodmap/missing index 894e786..1c8ff70 100755 --- a/xmodmap/missing +++ b/xmodmap/missing @@ -1,9 +1,9 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -scriptversion=2005-06-08.21 +scriptversion=2006-05-10.23 -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006 # Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. @@ -33,6 +33,8 @@ if test $# -eq 0; then fi run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' # In the cases where this matters, `missing' is being run in the # srcdir already. @@ -44,7 +46,7 @@ fi msg="missing on your system" -case "$1" in +case $1 in --run) # Try to run requested program, and just exit if it succeeds. run= @@ -77,6 +79,7 @@ Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c @@ -106,7 +109,7 @@ esac # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect # the program). -case "$1" in +case $1 in lex|yacc) # Not GNU programs, they don't have --version. ;; @@ -135,7 +138,7 @@ esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. -case "$1" in +case $1 in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if @@ -164,7 +167,7 @@ WARNING: \`$1' is $msg. You should only need it if test -z "$files" && files="config.h" touch_files= for f in $files; do - case "$f" in + case $f in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; @@ -192,8 +195,8 @@ WARNING: \`$1' is needed, but is $msg. You can get \`$1' as part of \`Autoconf' from any GNU archive site." - file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` - test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else @@ -214,25 +217,25 @@ WARNING: \`$1' $msg. You should only need it if in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then + if test $# -ne 1; then eval LASTARG="\${$#}" - case "$LASTARG" in + case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.h fi ;; esac fi - if [ ! -f y.tab.h ]; then + if test ! -f y.tab.h; then echo >y.tab.h fi - if [ ! -f y.tab.c ]; then + if test ! -f y.tab.c; then echo 'main() { return 0; }' >y.tab.c fi ;; @@ -244,18 +247,18 @@ WARNING: \`$1' is $msg. You should only need it if in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c - if [ $# -ne 1 ]; then + if test $# -ne 1; then eval LASTARG="\${$#}" - case "$LASTARG" in + case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" lex.yy.c fi ;; esac fi - if [ ! -f lex.yy.c ]; then + if test ! -f lex.yy.c; then echo 'main() { return 0; }' >lex.yy.c fi ;; @@ -267,11 +270,9 @@ WARNING: \`$1' is $msg. You should only need it if \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` - fi - if [ -f "$file" ]; then + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then touch $file else test -z "$file" || exec >$file @@ -289,11 +290,17 @@ WARNING: \`$1' is $msg. You should only need it if DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi @@ -317,13 +324,13 @@ WARNING: \`$1' is $msg. You should only need it if fi firstarg="$1" if shift; then - case "$firstarg" in + case $firstarg in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac - case "$firstarg" in + case $firstarg in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 diff --git a/xmodmap/pf.c b/xmodmap/pf.c index 99c20f7..e97a4bf 100644 --- a/xmodmap/pf.c +++ b/xmodmap/pf.c @@ -34,11 +34,10 @@ from The Open Group. #include "xmodmap.h" #define NOTINFILEFILENAME "commandline" -char *inputFilename = NOTINFILEFILENAME; +const char *inputFilename = NOTINFILEFILENAME; int lineno = 0; -void process_file (filename) - char *filename; /* NULL means use stdin */ +void process_file (const char *filename) /* NULL means use stdin */ { FILE *fp; char buffer[BUFSIZ]; @@ -80,8 +79,7 @@ void process_file (filename) } -void process_line (buffer) - char *buffer; +void process_line (char *buffer) { int len; int i; diff --git a/xmodmap/xmodmap.c b/xmodmap/xmodmap.c index c59f07b..556937a 100644 --- a/xmodmap/xmodmap.c +++ b/xmodmap/xmodmap.c @@ -35,7 +35,7 @@ from The Open Group. #include #include "xmodmap.h" -char *ProgramName; +const char *ProgramName; Display *dpy = NULL; int min_keycode, max_keycode; Bool verbose = False; @@ -62,66 +62,56 @@ chk_malloc(size_t n_bytes) return buf; } -static char *help_message[] = { -"\nwhere options include:", -" -display host:dpy X server to use", -" -verbose, -quiet turn logging on or off", -" -n don't execute changes, just show like make", -" -e expression execute string", -" -pm print modifier map", -" -pk print keymap table", -" -pke print keymap table as expressions", -" -pp print pointer map", -" -grammar print out short help on allowable input", -" - read standard input", -"", -NULL}; +static const char help_message[] = +"\nwhere options include:\n" +" -display host:dpy X server to use\n" +" -verbose, -quiet turn logging on or off\n" +" -n don't execute changes, just show like make\n" +" -e expression execute string\n" +" -pm print modifier map\n" +" -pk print keymap table\n" +" -pke print keymap table as expressions\n" +" -pp print pointer map\n" +" -grammar print out short help on allowable input\n" +" - read standard input\n" +"\n"; static void usage(void) { - char **cpp; - fprintf (stderr, "usage: %s [-options ...] [filename]\n", ProgramName); - for (cpp = help_message; *cpp; cpp++) { - fprintf (stderr, "%s\n", *cpp); - } + fprintf (stderr, "%s\n", help_message); Exit (1); } -static char *grammar_message[] = { -" pointer = default reset pointer buttons to default", -" pointer = NUMBER ... set pointer button codes", -" keycode NUMBER = [KEYSYM ...] map keycode to given keysyms", -" keysym KEYSYM = [KEYSYM ...] look up keysym and do a keycode operation", -" clear MODIFIER remove all keys for this modifier", -" add MODIFIER = KEYSYM ... add the keysyms to the modifier", -" remove MODIFIER = KEYSYM ... remove the keysyms from the modifier", -"", -"where NUMBER is a decimal, octal, or hex constant; KEYSYM is a valid", -"Key Symbol name; and MODIFIER is one of the eight modifier names: Shift,", -"Lock, Control, Mod1, Mod2, Mod3, Mod4, or Mod5. Lines beginning with", -"an exclamation mark (!) are taken as comments. Case is significant except", -"for MODIFIER names.", -"", -"Keysyms on the left hand side of the = sign are looked up before any changes", -"are made; keysyms on the right are looked up after all of those on the left", -"have been resolved. This makes it possible to swap modifier keys.", -"", -NULL }; +static const char grammar_message[] = +" pointer = default reset pointer buttons to default\n" +" pointer = NUMBER ... set pointer button codes\n" +" keycode NUMBER = [KEYSYM ...] map keycode to given keysyms\n" +" keysym KEYSYM = [KEYSYM ...] look up keysym and do a keycode operation\n" +" clear MODIFIER remove all keys for this modifier\n" +" add MODIFIER = KEYSYM ... add the keysyms to the modifier\n" +" remove MODIFIER = KEYSYM ... remove the keysyms from the modifier\n" +"\n" +"where NUMBER is a decimal, octal, or hex constant; KEYSYM is a valid\n" +"Key Symbol name; and MODIFIER is one of the eight modifier names: Shift,\n" +"Lock, Control, Mod1, Mod2, Mod3, Mod4, or Mod5. Lines beginning with\n" +"an exclamation mark (!) are taken as comments. Case is significant except\n" +"for MODIFIER names.\n" +"\n" +"Keysyms on the left hand side of the = sign are looked up before any changes\n" +"are made; keysyms on the right are looked up after all of those on the left\n" +"have been resolved. This makes it possible to swap modifier keys.\n" +"\n"; static void grammar_usage(void) { - char **cpp; - fprintf (stderr, "%s accepts the following input expressions:\n\n", ProgramName); - for (cpp = grammar_message; *cpp; cpp++) { - fprintf (stderr, "%s\n", *cpp); - } + fprintf (stderr, "%s\n", grammar_message); Exit (0); } diff --git a/xmodmap/xmodmap.h b/xmodmap/xmodmap.h index d52ef5e..e020358 100644 --- a/xmodmap/xmodmap.h +++ b/xmodmap/xmodmap.h @@ -28,17 +28,17 @@ from The Open Group. */ /* $XFree86: xc/programs/xmodmap/xmodmap.h,v 1.4 2001/01/17 23:46:21 dawes Exp $ */ -extern char *ProgramName; +extern const char *ProgramName; extern Display *dpy; extern int min_keycode, max_keycode; extern Bool verbose; extern Bool dontExecute; -extern char *inputFilename; +extern const char *inputFilename; extern int lineno; extern int parse_errors; extern void initialize_map(void); -extern void process_file(char *filename); +extern void process_file(const char *filename); extern void process_line(char *buffer); extern void handle_line(char *line, int len); extern void print_work_queue(void); diff --git a/xmodmap/xmodmap.man b/xmodmap/xmodmap.man index 4a7a95d..69b5f2d 100644 --- a/xmodmap/xmodmap.man +++ b/xmodmap/xmodmap.man @@ -89,7 +89,8 @@ may be specified from the command line. .TP 8 .B \-pm This option indicates that the current modifier map should be printed on the -standard output. +standard output. This is the default mode of operation if no other mode +options are specified. .TP 8 .B \-pk This option indicates that the current keymap table should be printed on the