jcarr
/
wit-network-config
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
wit-network-config/files/ipsec.conf.wit

53 lines
962 B
Plaintext
Raw Normal View History

adding ipsec config as well
2018-07-27 15:34:21 -05:00
config setup
#strictcrlpolicy=yes
cachecrls=yes
conn %default
ipsec changes: IKEv2, and more ipsec changes to hopefully inclrease stability
2018-11-18 15:06:53 -06:00
#keyexchange=ikev1
adding ipsec config as well
2018-07-27 15:34:21 -05:00
keyingtries=%forever
raising dpdtimeout to be 5x the delay, it's much more agressive than defaults but at least its the same multiplier than default
2018-11-18 16:18:29 -06:00
dpdtimeout=10
ipsec changes: IKEv2, and more ipsec changes to hopefully inclrease stability
2018-11-18 15:06:53 -06:00
dpddelay=2
changed my mind about closeaction, we should maybe have that, but trying to use hold instead
2018-11-18 15:14:26 -06:00
dpdaction=hold
#closeaction=none
adding ipsec config as well
2018-07-27 15:34:21 -05:00
type=transport
ipsec: adding new key-proposal that we wanna move towards to. once rolled out, we'd like to deprecate the old weak ones
2018-10-26 14:46:49 -05:00
ike=aes256-sha512-modp4096,aes128-sha1-modp2048!
esp=aes256-sha512-modp4096,aes128-sha1-modp2048!
adding ipv6 tunnel to strongswan and matching firewall rules
2018-09-17 14:28:02 -05:00
leftcert=FQHOSTNAME.crt
leftid="C=US, O=Wit, CN=FQHOSTNAME"
rightid="C=US, O=Wit, CN=*"
auto=route
adding ipsec config as well
2018-07-27 15:34:21 -05:00
ipsec changes: IKEv2, and more ipsec changes to hopefully inclrease stability
2018-11-18 15:06:53 -06:00
conn local4
left=LOOPBACKv4
leftsubnet=LOOPBACKv4
right=LOOPBACKv4
rightsubnet=LOOPBACKv4
auth=none
type=passthrough
adding ipv6 tunnel to strongswan and matching firewall rules
2018-09-17 14:28:02 -05:00
conn loopback4
ipsec: setting source IP to loopback
2018-10-31 17:06:30 -05:00
left=LOOPBACKv4
setting leftsubnet to only be the local loopback instead of a wide range. this will avoid blackholing traffic for edges and potentially other nodes
2018-10-23 16:28:29 -05:00
leftsubnet=LOOPBACKv4
ipsec changes: IKEv2, and more ipsec changes to hopefully inclrease stability
2018-11-18 15:06:53 -06:00
right=IPSEC_IPV4_SUBNETS
more work on edge.... adding support for dynamic ipsec subnets and some more minor patches
2018-10-19 12:57:07 -05:00
rightsubnet=IPSEC_IPV4_SUBNETS
ipsec changes: IKEv2, and more ipsec changes to hopefully inclrease stability
2018-11-18 15:06:53 -06:00
conn local6
left=LOOPBACKv6
leftsubnet=LOOPBACKv6
right=LOOPBACKv6
rightsubnet=LOOPBACKv6
auth=none
type=passthrough
adding ipv6 tunnel to strongswan and matching firewall rules
2018-09-17 14:28:02 -05:00
conn loopback6
ipsec: setting source IP to loopback
2018-10-31 17:06:30 -05:00
left=LOOPBACKv6
setting leftsubnet to only be the local loopback instead of a wide range. this will avoid blackholing traffic for edges and potentially other nodes
2018-10-23 16:28:29 -05:00
leftsubnet=LOOPBACKv6
adding ipv6 tunnel to strongswan and matching firewall rules
2018-09-17 14:28:02 -05:00
right=%any6
ipsec changes: IKEv2, and more ipsec changes to hopefully inclrease stability
2018-11-18 15:06:53 -06:00
rightsubnet=IPSEC_IPV6_SUBNETS
adding ipsec config as well
2018-07-27 15:34:21 -05:00