This adds new FW for bnx2x, which adds the following:
- Ability to change outer vlan ID for some multi-function modes.
- FW ability for Geneve RSS classification according to inner headers.
- Prevent VFs from sending MAC control frames.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7265 (C0/D0)
also known as Intel StP C0 and StP D0
C0 Patch Version: 55
D0 Patch Version: 32
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This adds Skylake audio dsp firmware which will be used in Skylake systems
with adsp enabled.
The version of this firmware release is 8.20.00.669
The md5sum of this firmware binary is 039c718077ea3c3a4253110a0554f422
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This is to make sure that the notice files get automatically included.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <jkkm@boosh.dhcp.thefacebook.com>
This patch adds firmware for the BCM4350 11ac PCIe device.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kyle McMartin <jkkm@boosh.DHCP.thefacebook.com>
Version 14.68.29.p49
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
SD8897:
WLAN (SDIO) firmware version: 15.68.7.p53
Bluetooth (SDIO) firmware version: 15.68.7.p53
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.7.p53
Bluetooth (USB) firmware version: 15.68.7.p53
The combo image will be downloaded through WLAN only.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
This versions has the risk of "DMC RAM corruption issue"
fixed on 1.23.
So let's remove old version and let only the latest one available
for now.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Version: 1.23
Date : 10/19/2015
Notes:
Following additions from ver1.22
1. WA for Palette and DMC RAM corruption issue.
DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.22
DC3_DC5_COUNT 80030
DC5_DC6_COUNT 8002C
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add initial firmware and board files for QCA99X0 hw2.0 family of chipsets.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
[bwh: Remove trailing whitespace from notice]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Add initial firmware and board files for QCA6174 hw3.0 family of chipsets.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
[bwh: Remove trailing whitespace from notice and convert it to UTF-8]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Add initial firmware and board files for QCA6174 hw2.1 family of chipsets.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
[bwh: Remove trailing whitespace from notice and convert it to UTF-8]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Add firmware 10.2.4.70.9-2 which uses FW API 5 so use name firmware-5.bin. Keep
firmware-4.bin for backwards compatibility with older ath10k versions.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
[bwh: Remove trailing whitespace from notice]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
In commit 40d14143b7 ("ath10k: add firmware 10.2.4.45 as firmware-4.bin") I
forgot to commit board.bin file and that's why it was not included in the
commit even I had added an entry to WHENCE. Add that now.
At the same time also add Version field for firmware-4.bin.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This makes it easier for downstream distributors to check which files
are clearly distributable without unusual restrictions.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
These files were previously available from
ftp://ftp.qlogic.com/outgoing/linux/firmware under a BSD-ish licence.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
This patch adds the firmware patch for Intel Bluetooth 7265 (D1)
also known as Intel StP D1.
D1 Patch Version: 9
Release Version: 153.1
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch adds a firmware for the USB 3.0 host controllers of Renesas
R-Car H3 SoC.
This firmware is possible to use on R-Car H2 and M2. However, this
version causes performance degradation on R-Car H2 and M2. So, we would
like to keep the v1 firmware.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7265 (C0/D0)
also known as Intel StP C0 and StP D0.
C0 Patch Version: 54
D0 Patch Version: 28
Release Version: 153
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7260 (B5/B6)
also known as Intel WP2 B5 and WP1 B6
Patch Version: 34
Release Version: 153
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7260 (B3/B4)
also known as Intel WP2 B3 and WP1 B4
Patch Version: 83
Release Version: 153
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch adds firmware for Keystone QMSS Accumulator PDSP. This is required
to support Accumulator queues. Accumulator queues are one of the queue types
supported in drivers/soc/ti/knav_qmss_acc.c. This queue can be part of a
channel that supports one queue or multiple queue per channel and are managed
by the Accumulator PDSP. For more details on hardware, please refer
http://www.ti.com/lit/ug/sprugr9h/sprugr9h.pdf and DT documentation below in
linux kernel source tree
Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
The code points to the major version that is a link to the most
recent one, so we can remove the old firmware blobs.
For tests and validation purposes we will let few minor versions
available, but we need to let linux-firmware repo as
clean as possible, so let's remove old and unused ones.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Version: 1.22
Date : 9/23/2015
Notes:
Following additions from ver1.21
1. PLL lock wait time updated
2. DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.21
DC3_DC5_COUNT 80030
DC5_DC6_COUNT 8002C
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
SD8897:
WLAN (SDIO) firmware version: 15.68.7.p18
Bluetooth (SDIO) firmware version: 15.68.7.p18
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.7.p18
Bluetooth (USB) firmware version: 15.68.7.p18
The combo image will be downloaded through WLAN only.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
Following additions from previous version
1. Updated FW for NV12 enabling
2. Changes to the waits times for pll enable and disable.
3. Fixed GT interrupts issue
4. DC3_DC5_COUNT: 80038
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
VI asics are supported by the new amdgpu driver and
this adds the initial firmware to support them.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This is the first release of the Intel OPA hfi1 firmware required by the hfi1
driver.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Steve Vogel <steve.vogel@intel.com>
Following additions from ver1:
1. Performance Improvement.
2. Fix reset issue.
3. Scheduler fix.
4. Merge in new power management features.
5. Firmware layout changes.
6. Force Fence WA to guarantee correct ordering of GTT writes from uKernel.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The code points to the major version that is a link to the most
recent one, so we can remove the old firmware blobs.
For tests and validation purposes we will let at least 3 latest
minor available, but we need to let linux-firmware repo as
clean as possible, so let's remove old and unused ones.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Following additions from ver1.20
1. Fixed GT interrupts issue when DC6 is enabled
2. DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.20
DC3_DC5_COUNT 80030
DC5_DC6_COUNT 8002C
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Following additions from ver1.19
1. Changes to the waits times for pll enable and disable.
2. DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.19
DC3_DC5_COUNT 80030
DC5_DC6_COUNT 8002C
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Following additions from ver1.04
1. No changes to the FW program itself
2. CSS header size field was fixed
3. Date field is fixed in header.
4. DC3_DC5_COUNT � 80038
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Following additions:
1. Updated FW for NV12 enabling
3. DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.18 and ver1.17
DC3_DC5_COUNT 80030
DC5_DC6_COUNT 8002C
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is new firmware for wilc1000 which is a single chip IEEE 802.11
b/g/n device.
Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
After enabling asymmetric key encryption in qat driver an update to existing
firmware is required plus a new Modular Math Processor(MMP) firmware.
This has dependency on these commits:
commit f3dd7e60d2028b8391dea7a3b214e3083dadf6d6
commit 28cfaf67e5c1f5b6b0d549eea398f8401a40e566
commit a990532023b903b10cf14736241cdd138e4bc92c
Signed-off-by: Xiaoyan Bo <xiaoyan.bo@intel.com>
Signed-off-by: Gokhan Simsek <gokhan.simsek@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
The new FW will allow us to utilize some new features in our driver,
mainly adding vlan stripping offload and vxlan offload support.
In addition, this fixes several issues:
- Packets from a VF with pvid configured which were sent with a
different vlan were transmitted instead of being discarded.
- FCoE traffic might not recover after a failue while there's traffic
to another function.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This updates the firmware for BSW platform, which includes the fixes for BSW
power management.
The firmware version is also added to WHENCE file. The version is
v01.0B.02.01.
The md5sum of the file is cf8caa8d33e95744f25adcab1373daff
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Latest firmware files supporting QCA61x4 ROME family chipset
Signed-off-by: Ben Young Tae Kim <ytkim@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
The atusb kernel driver is sitting in the bluetooth-next tree waiting for the
merge window to open. It's scheduled for 4.2.
Flashing goes into permanent storage and the GPLv2+ firmware allows for further
explorations. See ChangeLog for more details and links.
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This is the firmware for the VCE (video encoding engine)
block in SI and TN/RL asics.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Following additions:
1. No changes to the FW program itself
2. CSS header size field was fixed
3. DMCheader length field is mentioned in dwords instead of bytes
4. Date field is fixed in header.
4. Fixed the DMC Header.HeaderLen issue. The HeaderLen is specified in bytes instead of dwords.
6. DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.16
DC3_DC5_COUNT 80030
DC5_DC6_COUNT 8002C
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This firmware also supports 3165.
This is the first firmware release for 8000.
Version number: 25.30.13.0
Revision number: 183742
Build number: WFFW14681
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Following additions:
1. The DE_RRMR and DE_GUCRMR register bits are set before the restore of
the registers to mask the flip done, etc. Once all the registers are
restored, these registers are restored.
2. The pipe interrupt registers are restored only after the plane has
been enabled.
3. Naming of the file changed from .5 to .16 to make it two decimal
points for increased number of versions that can be supported.
4. DC 5 and 6 count locations are in the below mentioned offsets
DC3_DC5_COUNT 80030
DC5_DC6_COUNT 8002C
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
DMC provides additional graphics low-power idle states. It provides
capability to save and restore display registers across these
low-power states independently from the OS/Kernel.
This is the first release of DMC firmware for Broxton platforms.
bxt_dmc_ver1.bin is a symbolik link to latest recommended minor
release.
This major version will be just upgraded on code when it is required
software changes for API/ABI compatibility.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
GuC is designed to perform graphics workload scheduling on the various
graphics parallel engines. In this scheduling model, host software
submits work through one of the 256 graphics doorbells and this invokes
the scheduling operation on the appropriate graphics engine. Scheduling
operations include determining which workload to run next, submitting a
workload to a command streamer, pre-empting existing workloads running
on an engine, monitoring progress and notifying host SW when work is
done.
This is the first release of GuC firmware for Skylake platforms.
skl_guc_ver1.bin is a symbolik link to latest recommended minor release.
This major version will be just upgraded on code when it is required
software changes for API/ABI compatibility.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
DMC provides additional graphics low-power idle states. It provides
capability to save and restore display registers across these low-power
states independently from the OS/Kernel.
This is the first release of DMC firmware for Skylake platforms.
skl_dmc_ver1.bin is a symbolik link to latest recommended minor release.
This major version will be just upgraded on code when it is required
software changes for API/ABI compatibility.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This patch updates the firmware patch for Intel Bluetooth 7260 (B3/B4)
also known as Intel WP2 B3 and WP1 B4.
Patch Version: 79
Release Version: 152.1
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7260 (B5/B6)
also known as Intel WP2 B5 and WP1 B6.
Patch Version: 26
Release Version: 152
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7265 (C0/D0)
also known as Intel StP C0 and StP D0.
C0 Patch Version: 43
D0 Patch Version: 15
Release Version: 152
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
- Firmware file was updated (8.9.0.0.39), includes bug fixes and improvements.
- Configuration binary removed, it is no longer fits all releases.
Moreover it should be configured per HW platform.
More information can found in here :
http://processors.wiki.ti.com/index.php/Open_Source_Wireless_Connectivity_wlconf
Signed-off-by: Yaniv Machani <yanivma@ti.com>
By uploading these firmware files to the Realtek Bluetooth HCD
(on the USB bus), the HCD becomes compliant with standard btusb
interfaces. The code to automatically upload the firmware has
been already upstreamed and it is currently in linux-next.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7260 (B3/B4)
also known as Intel WP2 B3 and WP1 B4.
Patch Version: 79
Release Version: 152.1
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7260 (B5/B6)
also known as Intel WP2 B5 and WP1 B6.
Patch Version: 26
Release Version: 152
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7265 (C0/D0)
also known as Intel StP C0 and StP D0.
C0 Patch Version: 43
D0 Patch Version: 15
Release Version: 152
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This is the latest firmware version for AR3012 2.2.1.
This also includes configuration file for coex support,
where all Bluetooth traffic is treated as high priority.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Add firmware file for the T210 XHCI controller. Note that this is only
compatible with T210 (T124 should continue using nvidia/tegra124/xusb.bin).
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch adds firmware files for the BCM43602 PCIe device
supported by brcmfmac. This device is used in router equipment
like Netgear R8000. For this reason there are two firmware
files in this patch.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This is the latest firmware from 10.2.4 firmware branch.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This fixes a variety of issues, including but not limited to:
ath9k_htc_firmware: check only the mesh control present subfield
Fix: bug in extend_tsf near 0x8000000 values
FIX: support rstamps from the future too.
Firmware sometimes returns erroneous timestamps(2)
Fixed incorrect wrapping handling in ath_extend_tsf().
Firmware sometimes returns erroneous timestamps
Added proper synchronization while handling lower 32 bit and
upper 32 bit parts in ar5416GetTsf64().
Fix resetting of txstatus flags.
Fix Array Out of Bounds in rcSibUpdate_ht()
ath9k_htc_firmware: fix the offset of CCMP header for mesh data frame
init.c: do cold reboot on exception
wmi:eadd new command WMI_REG_RMW_CMDID
remove transfer type patches for EP3 and EP4
k2_fw_usb_api: workaround for EP4 bug.
k2_fw_usb_api: prevent buffer overflow.
k2_fw_usb_api: fix typo in usb reg address
k2_fw_usb_api: add delay after mac reset
simplify STBC handling
This has been tested on both AR7010 and AR9271 devices.
Signed-off-by: Adrian Chadd <adrian@FreeBSD.org>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Add firmware file for the T124 XHCI controller, along with the NVIDIA
license file.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch rebrands the BFA/BNA inbox driver firmwares.
This patch adds 3.2.5.1 firmware files for QLogic BR-series Adapters that will
be used with the inbox drivers(BFA and BNA).
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This fixes issues that were seen in -10.ucode for the
devices listed above.
Version number: 23.14.10.0
Revision number: 123233
Build number: WFFW11203
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
This patch updates the firmware patch for Intel Bluetooth 7265 (D0)
also known as Intel StP D0.
Patch Version: 09
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7260 (B6)
also known as Intel WP1 B6.
Patch Version: 24
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7265 (C0)
also known as Intel StP C0.
Patch Version: 40
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7260 (B5)
also known as Intel WP2 B5.
Patch Version: 24
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7260 (B4)
also known as Intel WP1 B4
Patch Version: 72
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7260 (B3)
also known as Intel WP2 B3.
Patch Version: 72
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This adds the fw_sst_22a8.bin binary for the Intel Braswell platforms
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Update firmware intel/IntcSST2.bin from Version 8.4.1.68 to 8.4.1.77
Fix for freeing capture stream just after resetting it.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p112
Bluetooth (SDIO) firmware version: 15.28.4.p112
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p112
Bluetooth (USB) firmware version: 15.28.4.p112
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p106
Bluetooth (SDIO) firmware version: 15.28.4.p106
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p106
Bluetooth (USB) firmware version: 15.28.4.p106
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
WLAN (USB) firmware version: 14.68.22.p16
Bluetooth (USB) firmware version: 14.28.22.p16
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: James Jan <jjan@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
WLAN (SDIO) firmware version: 15.68.7.p5
Bluetooth (SDIO) firmware version: 15.29.7.p5
The combo image can be downloaded through either WLAN or Bluetooth.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
Version 14.68.29.p38
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
Version 14.66.35.p52
Note that this version doesn't support BT-AMP.
The image can be downloaded through either WLAN or Bluetooth.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
Version 14.66.9.p192
Note that this version doesn't support BT-AMP.
The image can be downloaded through either WLAN or Bluetooth.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p73
Bluetooth (SDIO) firmware version: 15.28.4.p73
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p73
Bluetooth (USB) firmware version: 15.28.4.p73
The combo image will be downloaded through WLAN only.
USB8897:
WLAN (USB) firmware version: 15.68.4.p73
Bluetooth (USB) firmware version: 15.28.4.p73
The combo image will be downloaded through WLAN only.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
WLAN (USB) firmware version: 15.68.4.p22
Bluetooth (USB) firmware version: 15.28.4.p22
The combo image will be downloaded through WLAN only.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
WLAN (PCIe) firmware version: 15.68.4.p22
Bluetooth (USB) firmware version: 15.28.4.p22
The combo image will be downloaded through WLAN only.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
WLAN (SDIO) firmware version: 15.68.4.p22
Bluetooth (SDIO) firmware version: 15.28.4.p22
The combo image can be downloaded through either WLAN or Bluetooth.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p112
Bluetooth (SDIO) firmware version: 15.28.4.p112
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p112
Bluetooth (USB) firmware version: 15.28.4.p112
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
Recent testing by Realtek found bugs in both the driver and firmware for
the RTL8192EE chips.
Signed-off-by: Troy Tan <troy_tan@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This fixes issues that were seen in -10.ucode for the
devices listed above.
Version number: 23.11.10.0
Revision number: 95366
Build number: WFFW09254
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p106
Bluetooth (SDIO) firmware version: 15.28.4.p106
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p106
Bluetooth (USB) firmware version: 15.28.4.p106
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
This add the fw_sst_0f28.bin binary for the Intel baytrail platforms
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Add firmware file and licence for Intel Broadwell SST DSP audio.
The firmware is distributed under Intel Free Redistribution License.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
WLAN (USB) firmware version: 14.68.22.p16
Bluetooth (USB) firmware version: 14.28.22.p16
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: James Jan <jjan@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
WLAN (SDIO) firmware version: 15.68.7.p5
Bluetooth (SDIO) firmware version: 15.29.7.p5
The combo image can be downloaded through either WLAN or Bluetooth.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
Version 14.68.29.p38
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
This patch adds new firmware patch for
- Intel Wireless 7265 Bluetooth ROM-spin SKU, also known as StP D0
This patch was submitted but reverted due to patch issue.
The original patch's commit id: 935b5557b1
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This reverts commit 935b5557b1, the patch
did not apply correctly and ended up missing the actual firmware.
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch adds new firmware patch file for
- Intel Wireless 7265 Bluetooth ROM-spin SKU, also known as StP2 D0
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>