These NVIDIA-signed firmwares are required to enable the graphics engine
on Turing TU11X GPUs.
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
Tested-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
These NVIDIA-signed firmwares are required to enable the graphics engine
on Turing TU10X GPUs.
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
Tested-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This version of the Tegra210 XUSB firmware contains a number of fixes to
improve compatibility with various devices.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a firmware file for the XUSB controller found on Tegra194. This is
version 60.06 of the Tegra194 XUSB firmware.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Now that the copy-firmware.sh script can create symlinks from the Link:
entries in the WHENCE file on the fly, remove the duplicate symlinks
from the filesystem.
One odd entry was intel/dsp_fw_cnl.bin which was listed both as symlink
and as a regular file. Both entries can be removed since the it's really
a symlink, so it will be recreated at installation time.
While at it, update the check_whence.py script to not look for the
existence of symlinks in the filesystem because they are created on the
fly at installation time by the copy_firmware.sh script.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a firmware file for the XUSB controller found on Tegra186.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Create additional symlinks for these firmware binaries so that the Linux
drivers can refer to them by a more consistent name.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
The version of the SEC2 RTOS previously used does not function correctly
on certain newer GP10[2467] boards.
There are API differences between the two firmware versions, so both are
required to maintain forward/backward compatibility with the kernel code.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These NVIDIA-signed firmwares are required to enable the Cypress
Type-C controller on TU10x GPUs.
FW versions:
Secondary: 42
Primary: 3.1.10
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
These NVIDIA-signed firmwares are required to enable the graphics
engine on Volta GV100 GPUs.
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
Tested-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This is being done to resolve issues being seen on a number of newer
laptop systems which aren't compatible with the older binaries.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
These NVIDIA-signed firmwares are required to enable the graphics
engine on Pascal GP108 GPUs.
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
Tested-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add firmware files for the VIC falcon controller for Tegra124,
Tegra210 and Tegra186.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
It has been reported that the GP107 firmware would not pass signature
verification due to the wrong files being released. Replace them with
the proper files.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
These NVIDIA-signed firmwares are required to enable the graphics
engine on the Jetson TX2 board and other TX2-based devices.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
These NVIDIA-signed firmwares are required to enable the graphics
engine on Maxwell desktop GPUs.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Add firmware file for the T210 XHCI controller. Note that this is only
compatible with T210 (T124 should continue using nvidia/tegra124/xusb.bin).
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Add firmware file for the T124 XHCI controller, along with the NVIDIA
license file.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Gourav Samaiya
Thierry Reding
Ben Skeggs
Ajay Gupta
Mikko Perttunen
Alexandre Courbot
Alexandre Courbot
Andrew Chew
Kyle McMartin