Add firmware files for Adreno a405/a420/a430, used in several
generations of Qualcomm Snapdragon processors starting from APQ8084 up
to MSM8994 (including MSM8939 and several other ones).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
As of this writing, the FW version xx.2010.1006 is the lowest version with
which mlxsw will operate. It is therefore useful to distribute the
lc_ini_bundle for modular systems for this version as well. Add the file.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
In the previous patch, lc_ini_bundle_2010_1502.bin.xz was contributed.
Pushing an xz-encoded file was a mistake, the format required by the driver
is decompressed, and whether the firmware file is stored on-disk compressed
or plain is a user policy decision.
Therefore drop the xz file, and add the decompressed equivalent instead.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
board-2.bin replaces board.bin, so remove the latter. board-2.bin support was
added to ath10k back in 2015 so this won't break backwards compatiblity in
recent kernels.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Add latest verified version of Nvidia Spectrum-family switch firmware,
for Spectrum (13.2010.1502), Spectrum-2 (29.2010.1502) and Spectrum-3
(30.2010.1502). Furthermore, add lc_ini_bundle_2010_1502.bin.xz for
modular systems.
The following issues have been fixed:
- CRC errors when using 25Gbps links in a modular system.
- Issue in bring-up of line-card no. 8 in a modular system.
- Several issues with too-long link-up times.
- An interop issue with Broadcom Tomahawk.
- An issue that might cause dropping first several packets after a port
speed is changed to 400Gbps 8x.
- A switch freeze which might occur after many 10Gbps ports get disabled
simultaneously.
- Latency degradation of RALUE EMAD processing.
- An issue in port isolation, which would not work on two-way split port 64
on Spectrum-1, and four-way split port 128 on Spectrum-2 and Spectrum-3.
- Issue in multicast configuration on port 128 on Spectrum-2 and
Spectrum-3.
- On Spectrum-2 systems, when receiving a packet with Symbol Errors on
ports that are configured to cut-thought, in some cases, a pipeline may
get stuck.
- Several issues in autonegotiation.
In addition, the following improvement has been made:
- Support in FW for reporting module values to the SW.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Update binary firmware for MT7922 Bluetooth devices
File: mediatek/BT_RAM_CODE_MT7922_1_1_hdr.bin
Version: 20220322164155
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
System Control Processor is an RISC-V processor in MediaTek MT8195 SoC.
It supports vedio encode/decode and CrOS EC host command.
Release Version: v14454.8.0
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Add the modem DSP firmware for the Qualcomm APQ8096 boards. The files
come from the redistributable linux-board-support-package-r01700.1.zip
for the Dragonboard 820c. The file modem.mbn was generated from
segment files using the pil-squasher tool.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add the audio DSP firmware for the Qualcomm APQ8096 boards. The files
come from the redistributable linux-board-support-package-r01700.1.zip
for the Dragonboard 820c.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This firmware/config is submitted for RTL8852C BT USB I/F.
Version: 0xDFB7_BBFD
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
System Control Processor is an ARM RV33. It supports parts of
these features video encode/decode, mdp and CrOS EC host command.
Release Version: v1
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
These NVIDIA-signed firmwares are required to enable the graphics engine
on Ampere GA10{2/3/4/6/7} Gpus.
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
Tested-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
The Rock960, VIM2 and Firefly3399 all have a AP6356S WiFi module
and their NVRAM all appear to be the same so call the NVRAM after
the AP module and link the 3 devices to that to make it clear.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth 9462
Also it is known as Intel JeffersonPeak (JfP1).
FW Build: REL41819
Release Version: 22.130.1.1
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth 9462
Also it is known as Intel JeffersonPeak (JfP1).
FW Build: REL41819
Release Version: 22.130.1.1
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth 9560
Also it is known as Intel JeffersonPeak (JfP2).
FW Build: REL41819
Release Version: 22.130.1.1
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth 9560
Also it is known as Intel JeffersonPeak (JfP2).
FW Build: REL41819
Release Version: 22.130.1.1
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth AX201
Also it is known as Intel HarrisonPeak (HrP2).
FW Build: REL41819
Release Version: 22.130.1.1
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth AX201
Also it is known as Intel HarrisonPeak (HrP2).
FW Build: REL41819
Release Version: 22.130.1.1
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>