Merge branch 'linux-firmware' of git://github.com/TI-OpenLink/firmwares

LICENCE.ti-connectivity

@@ -1,151 +1,46 @@
-Texas Instruments Incorporated
+TECHNOLOGY AND SOFTWARE PUBLICLY AVAILABLE
-Technology and Software Publicly Available
+SOFTWARE LICENSE
-Software (Object Code) License Agreement
 
+Copyright (c) 2011, Texas Instruments Incorporated.
 
-IMPORTANT - PLEASE READ THE FOLLOWING LICENSE AGREEMENT CAREFULLY. THIS IS
+All rights reserved.
-	A LEGALLY BINDING AGREEMENT.  DO NOT DOWNLOAD THE LICENSED MATERIALS
-	UNLESS: (1) YOU ARE AUTHORIZED TO ACCEPT AND AGREE TO THE TERMS OF THIS
-	LICENSE AGREEMENT AND (2) YOU INTEND TO ENTER INTO AND TO BE BOUND BY
-	THE TERMS OF THIS AGREEMENT.
 
-This Software License Agreement ("Agreement") is a legal agreement between you
+Redistribution.
-	(either an individual or entity) and Texas Instruments Incorporated
-	("TI").  The "Licensed Materials" subject to this Agreement include,
-	in whole or in part, the software programs that accompany this Agreement
-	and any "on-line" or electronic documentation associated with these
-	programs.  By installing, copying or otherwise using the Licensed
-	Materials you agree to abide by the terms of this Agreement.
-	If you choose not to accept or agree with these terms, do not download
-	or install the Licensed Materials.
 
+Redistribution and use in binary form, without modification, are
+permitted provided that the following conditions are met:
 
-1. Object Code License.  TI hereby grants to you a limited, non-exclusive
+ * Redistributions must preserve existing copyright notices and reproduce
-	license to reproduce and use the Licensed Materials provided to you in
+   this license (including the above copyright notice and the disclaimer below)
-	object code format and to distribute an unlimited number of object or
+   in the documentation and/or other materials provided with the distribution.
-	executable copies of such Licensed Materials, provided that such object
-	or executable copies are used solely and exclusively on devices
-	manufactured by or for TI.
 
-2. Termination.  This license is effective until terminated.  Without prejudice
+ * Neither the name of Texas Instruments Incorporated nor the names of
-	to any other rights, TI may terminate your right to use the Licensed
+   its suppliers may be used to endorse or promote products derived
-	Materials under this Agreement if you fail to comply with the terms of
+   from this software without specific prior written permission.
-	this Agreement.  In such event, you shall destroy all copies of the
-	Licensed Materials, including all portions and derivatives thereof.
 
-3. Intellectual Property Rights.  The Licensed Materials being provided to you
+ * No reverse engineering, decompilation, or disassembly of this
-	hereunder are being made publicly available by TI, even though they
+   software is permitted.
-	contain copyrighted material of TI and its licensors, if applicable.
-	In no event may you alter, remove or destroy any copyright notice
-	included in the Licensed Materials.  To the extent that any of the
-	Licensed Materials are provided in binary or object code only, you may
-	not unlock, decompile, reverse engineer, disassemble or otherwise
-	translate such binary or object code to human-perceivable form. The
-	source code of such reverse engineered code may contain TI trade secret
-	and other proprietary information.  Further, nothing shall obligate TI
-	to provide you with source code for the Licensed Materials licensed to
-	you in binary or object code only under this Agreement.  TI reserves all
-	rights not specifically granted under this Agreement.
 
-4. Warranties and Limitations.  THE LICENSED MATERIALS ARE PROVIDED "AS IS". TI
+Limited patent license.
-	MAKES NO WARRANTY OR REPRESENTATION, EXPRESS, IMPLIED OR STATUTORY,
-	INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTIBILITY, FITNESS FOR A
-	PARTICULAR PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS OF
-	RESPONSES, RESULTS AND LACK OF NEGLIGENCE.  TI DISCLAIMS ANY WARRANTY OF
-	TITLE, QUIET ENJOYMENT, QUIET POSESSION, AND NON-INFRINGEMENT OF ANY
-	THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO THE LICENSED
-	MATERIALS OR USE OF THOSE MATERIALS.
 
-YOU ACKNOWLEDGE AND AGREE THAT THE LICENSED MATERIALS MAY NOT BE INTENDED FOR
+Texas Instruments Incorporated grants a world-wide, royalty-free,
-	PRODUCTION APPLICATIONS AND MAY CONTAIN IRREGULARITIES AND DEFECTS NOT
+non-exclusive license under patents it now or hereafter owns or controls
-	FOUND IN PRODUCTION SOFTWARE.  FURTHERMORE, YOU ACKNOWLEDGE AND AGREE
+to make, have made, use, import, offer to sell and sell ("Utilize") this
-	THAT THE LICENSED MATERIALS HAVE NOT BEEN TESTED OR CERTIFIED BY ANY
+software, but solely to the extent that any such patent is necessary
-	GOVERNMENT AGENCY OR INDUSTRY REGULATORY ORGANIZATION OR ANY OTHER THIRD
+to Utilize the software alone.  The patent license shall not apply to
-	PARTY ORGANIZATION.  YOU AGREE THAT PRIOR TO USING, INCORPORATING OR
+any combinations which include this software.  No hardware per se is
-	DISTRIBUTING THE LICENSED MATERIALS IN OR WITH ANY COMMERCIAL PRODUCT
+licensed hereunder.
-	THAT YOU WILL THOROUGHLY TEST THE PRODUCT AND THE FUNCTIONALITY OF THE
-	LICENSED MATERIALS IN OR WITH THAT PRODUCT AND BE SOLELY RESPONSIBLE FOR
-	ANY PROBLEMS OR FAILURES.
 
-IN NO EVENT SHALL TI, OR ANY APPLICABLE LICENSOR, BE LIABLE FOR ANY SPECIAL,
+DISCLAIMER.
-	INDIRECT, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED
-	ON ANY THEORY OF LIABILITY, ARISING IN ANY WAY OUT OF THIS AGREEMENT,
-	OR YOUR USE OF THE LICENSED MATERIALS, WHETHER OR NOT TI HAS BEEN
-	ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  EXCLUDED DAMAGES INCLUDE,
-	BUT ARE NOT LIMITED TO, COST OF REMOVAL OR REINSTALLATION, OUTSIDE
-	COMPUTER TIME, LABOR COSTS, LOSS OR CORRUPTION OF DATA, LOSS OF
-	GOODWILL, LOSS OF PROFITS, LOSS OF SAVINGS, OR LOSS OF USE OR
-	INTERRUPTION OF BUSINESS OR ANY OTHER ECONOMIC LOSS.  IN NO EVENT WILL
-	TI'S AGGREGATE LIABILITY UNDER THIS AGREEMENT OR ARISING OUT OF YOUR USE
-	OF THE LICENSED MATERIALS EXCEED FIVE HUNDRED U.S. DOLLARS (US$500).
-
-Because some jurisdictions do not allow the exclusion or limitation of
-	incidental or consequential damages or limitation on how long an implied
-	warranty lasts, the above limitations or exclusions may not apply to
-	you.
-
-5. Export Control. Thesoftware programs and any "on-line" documentation as well
-	as any updates or upgrades to such software programs or documentation
-	may be subject to the export or import regulations of certain countries.
-	You agree to comply with all such regulations and acknowledge that you
-	have the responsibility to obtain any licenses or other authorizations
-	that may be required to export, re-export or import the Licensed
-	Materials.
-
-6. Governing Law, Jurisdiction and Severability.  This Agreement will be
-	governed by and interpreted in accordance with the laws of the State of
-	Texas, without reference to that state's conflict of laws principles.
-	This Agreement shall not be governed by the United Nations Convention on
-	Contracts for the International Sale of Goods, nor shall it be governed
-	by the Uniform Computer Information Transactions Act (UCITA).  Any
-	dispute arising out of or related to this Agreement will be brought in,
-	and each party consents to the exclusive jurisdiction and venue in the
-	state and federal courts sitting in Dallas Country, Texas. Each party
-	waives all defenses of lack of personal jurisdiction and forum
-	non-conveniens and agrees that process may be served on either party in
-	a manner authorized by applicable law or court rule.  If for any reason
-	a court of competent jurisdiction finds any provision of the Agreement
-	to be unenforceable, that provision will be enforced to the maximum
-	extent possible to effectuate the intent of the parties and the
-	remainder of the Agreement shall continue in full force and effect.
-
-7. PRC Provisions.  If you are located in the People's Republic of China ("PRC")
-	or if the Licensed Materials will be sent to the PRC, the following
-	provisions shall apply and shall supersede any other provisions in this
-	Agreement concerning the same subject matter as the following
-	provisions:
-
-	a.	Registration Requirements.  You shall be solely responsible for
-	performing all acts and obtaining all approvals that may be required in
-	connection with this Agreement by the government of the PRC, including
-	but not limited to registering pursuant to, and otherwise complying
-	with, the PRC Measures on the Administration of Software Products,
-	Management Regulations on Technology Import-Export, and Technology
-	Import and Export Contract Registration Management Rules. Upon receipt
-	of such approvals from the government authorities, you shall forward
-	evidence of all such approvals to TI for its records.  In the event that
-	you fail to obtain any such approval or registration, you shall be
-	solely responsible for any and all losses, damages or costs resulting
-	therefrom, and shall indemnify TI for all such losses, damages or costs.
-
-	b.	Governing Language.  This Agreement is written and executed in
-	the English language.  If a translation of this Agreement is required
-	for any purpose, including but not limited to registration of the
-	Agreement pursuant to any governmental laws, regulations or rules, you
-	shall be solely responsible for creating such translation.  Any
-	translation of this Agreement into a language other than English is
-	intended solely in order to comply with such laws or for reference
-	purposes, and the English language version shall be authoritative and
-	controlling.
-
-8. Entire Agreement.  This is the entire Agreement between you and TI and
-	supersedes any prior agreement between the parties related to the
-	subject matter of this Agreement. No amendment or modification of this
-	Agreement will be effective unless in writing and signed by a duly
-	authorized representative of TI.  You hereby warrant and represent that
-	you have obtained all authorizations and other applicable consents
-	required empowering you to enter into this Agreement.
-
-1
-TILAW-#236402v3
 
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

WHENCE

@@ -1580,15 +1580,36 @@ Licence: Redistributable. See LICENCE.tda7706-firmware.txt for details.
 Driver: wl12xx - Texas Instruments 802.11 wireless LAN driver
 
 File: wl1271-fw.bin
+Version: 6.1.0.50.350 (STA-only)
 File: wl1271-fw-2.bin
+Version: 6.1.5.50.74 (STA-only)
 File: wl1271-fw-ap.bin
+Version: 6.2.1.0.54 (AP-only)
 File: wl127x-fw-3.bin
+Version: 6.3.0.0.77
 File: wl127x-fw-plt-3.bin
+Version: 6.3.0.0.77 (PLT-only)
+File: wl127x-fw-4-sr.bin
+Version: 6.3.5.0.98 (Single-role)
+File: wl127x-fw-4-mr.bin
+Version: 6.5.2.0.15 (Multi-role)
+File: wl127x-fw-4-plt.bin
+Version: 6.3.5.0.98 (PLT-only)
 
 File: wl128x-fw.bin
+Version: 7.1.5.50.74 (STA-only)
 File: wl128x-fw-ap.bin
+Version: 7.2.1.0.54 (AP-only)
 File: wl128x-fw-3.bin
+Version: 7.3.0.0.77
 File: wl128x-fw-plt-3.bin
+Version: 7.3.0.0.77
+File: wl128x-fw-4-sr.bin
+Version: 7.3.5.0.98 (Single-role)
+File: wl128x-fw-4-mr.bin
+Version: 7.5.2.0.15 (Multi-role)
+File: wl128x-fw-4-plt.bin
+Version: 7.3.5.0.98 (PLT)
 
 File: wl127x-nvs.bin
 File: wl128x-nvs.bin
@@ -1598,28 +1619,23 @@ sl:   wl1271-nvs.bin -> wl127x-nvs.bin
 
 Licence: See LICENCE.ti-connectivity for details.
 
-	Station:      wl1271-fw.bin version 6.1.0.50.350
+The NVS file includes two parts:
-	Station:      wl1271-fw-2.bin version 6.1.5.50.74
-	Station:      wl128x-fw.bin version 7.1.5.50.74
-	Access Point: wl1271-fw-ap.bin version 6.2.1.0.54
-	Access Point: wl128x-fw-ap.bin version 7.2.1.0.54
-	Station & Access Point: wl127x-fw-3.bin version Rev 6.3.0.0.77
-	PLT: 			wl127x-fw-3.bin version PLT 6.3.0.0.77
-	Station & Access Point: wl128x-fw-3.bin version Rev 7.3.0.0.77
-	PLT:			wl128x-fw-3.bin version PLT 7.3.0.0.77
-
-The nvs file includes two parts:
 	 - radio calibration
-	 - ini setting parameters
+	 - HW configuration parameters (aka. INI values)
 
-In order to have correct NVS file for your device NVS tool should be use:
+The published NVS files are for testing only.  Every device needs to
-http://linuxwireless.org/en/users/Drivers/wl12xx/calibrator
+hava a unique NVS which is properly calibrated for best results.  You
+can find more information about NVS generation for your device here:
 
-Example NVS files (not optimal) for wl127x and wl128x includes.
+http://wireless.kernel.org/en/users/Drivers/wl12xx/calibrator
-To use example NVS set symbolic link wl12xx-nvs.bin to one of
-them (depending the chip on the platform)
 
-In order to use that files copy ti-connectivity directory to target FS at
+If you're using a wl127x based device, use a symbolic link called
+wl1271-nvs.bin that links to the wl127x-nvs.bin file.  If you are
+using wl128x, link to wl128x-nvs.bin instead.
+
+The driver expects to find the firmwares under a ti-connectivity
+subdirectory.  So if your system looks for firmwares in /lib/firmware,
+the firmwares for wl12xx chips must be located in
 /lib/firmware/ti-connectivity/.
 
 --------------------------------------------------------------------------