.. -*- Mode: rst -*- .. role:: ul .. role:: cb .. role:: sc .. Acronyms & names. .. |GNU| replace:: :sc:`gnu` .. |LGPL| replace:: :sc:`lgpl` .. |GPL| replace:: :sc:`gpl` .. |UPMC| replace:: :sc:`upmc` .. |Bull| replace:: :sc:`Bull` .. |Cadence| replace:: :sc:`Cadence` .. |Si2| replace:: :sc:`Si2` .. |LEFDEF| replace:: :sc:`lefdef` .. |Flute| replace:: :sc:`Flute` .. |Alexandre| replace:: :sc:`Alexandre` .. |Belloeil| replace:: :sc:`Belloeil` .. |Chaput| replace:: :sc:`Chaput` .. |Chu| replace:: :sc:`Chu` .. |Dupuis| replace:: :sc:`Dupuis` .. |Escassut| replace:: :sc:`Escassut` .. |Masson| replace:: :sc:`Masson` .. |ANSI| replace:: :sc:`ansi` .. |MIPS| replace:: :sc:`mips` .. |Am2901| replace:: :sc:`Am2901` .. |Hurricane| replace:: :sc:`Hurricane` .. |HurricaneAMS| replace:: :sc:`HurricaneAMS` .. |Alliance| replace:: :sc:`Alliance` .. |GenLib| replace:: :sc:`GenLib` .. |Nero| replace:: :sc:`Nero` .. |Druc| replace:: :cb:`Druc` .. |Coriolis| replace:: :sc:`Coriolis` .. |Coriolis1| replace:: :sc:`Coriolis 1` .. |Coriolis2| replace:: :sc:`Coriolis 2` .. |VLSISAPD| replace:: :sc:`vlsisapd` .. |CRLcore| replace:: :sc:`CRLcore` .. |Cyclop| replace:: :sc:`Cyclop` .. |Nimbus| replace:: :sc:`Nimbus` .. |hMetis| replace:: :sc:`hMetis` .. |Mauka| replace:: :sc:`Mauka` .. |Knik| replace:: :sc:`Knik` .. |Kite| replace:: :sc:`Kite` .. |Stratus| replace:: :sc:`Stratus` .. |Stratus1| replace:: :sc:`Stratus1` .. |Stratus2| replace:: :sc:`Stratus2` .. |Unicorn| replace:: :sc:`Unicorn` .. |cgt| replace:: :cb:`cgt` .. |Chams| replace:: :sc:`Chams` .. |OpenChams| replace:: :sc:`OpenChams` .. |Pharos| replace:: :cb:`Pharos` .. |API| replace:: :sc:`api` .. |STL| replace:: :sc:`stl` .. |XML| replace:: :sc:`xml` .. |pdf| replace:: :sc:`pdf` .. |UTF-8| replace:: :sc:`utf-8` .. |Python| replace:: :sc:`Python` .. |Linux| replace:: :sc:`Linux` .. |Scientific Linux| replace:: :sc:`Scientific Linux` .. |RedHat| replace:: :sc:`RedHat` .. |Fedora| replace:: :sc:`Fedora` .. |FC13| replace:: :sc:`fc13` .. |Ubuntu| replace:: :sc:`Ubuntu` .. |Qt| replace:: :sc:`qt` .. |tty| replace:: :cb:`tty` .. URLs .. _Box Router: http://www.cerc.utexas.edu/~thyeros/boxrouter/boxrouter.htm .. _Knik Thesis: http://www-soc.lip6.fr/en/users/damiendupuis/PhD/ .. _coriolis2-1.0.2049-1.slsoc6.i686.rpm: http://asim.lip6.fr/pub/coriolis/2.0/coriolis2-1.0.2049-1.slsoc6.i686.rpm .. _coriolis2-1.0.2049-1.slsoc6.x86_64.rpm: http://asim.lip6.fr/pub/coriolis/2.0/coriolis2-1.0.2049-1.slsoc6.x86_64.rpm .. _coriolis2-1.0.2049-1.fc16.i686.rpm: http://asim.lip6.fr/pub/coriolis/2.0/coriolis2-1.0.2049-1.fc16.i686.rpm .. _coriolis2-1.0.2049-1.fc16.x86_64.rpm: http://asim.lip6.fr/pub/coriolis/2.0/coriolis2-1.0.2049-1.fc16.x86_64.rpm .. _coriolis2_1.0-2049-1_.i386.rpm (10.04): http://asim.lip6.fr/pub/coriolis/2.0/Ubuntu/10.04/coriolis2_1.0-2049-1_i386.rpm .. _coriolis2_1.0-2049-1_.amd64.rpm (10.04): http://asim.lip6.fr/pub/coriolis/2.0/Ubuntu/10.04/coriolis2_1.0-2049-1_i386.rpm .. _coriolis2_1.0-2049-1_.i386.rpm (12.04): http://asim.lip6.fr/pub/coriolis/2.0/Ubuntu/12.04/coriolis2_1.0-2049-1_i386.rpm .. _coriolis2_1.0-2049-1_.amd64.rpm (12.04): http://asim.lip6.fr/pub/coriolis/2.0/Ubuntu/12.04/coriolis2_1.0-2049-1_i386.rpm .. Standard CAO/VLSI Concepts. .. |netlist| replace:: *netlist* .. |netlists| replace:: *netlists* .. |layout| replace:: *layout* .. |layouts| replace:: *layouts* .. |CMOS| replace:: :sc:`cmos` .. |VHDL| replace:: :sc:`vhdl` .. |NWELL| replace:: :sc:`nwell` .. |POWER| replace:: :sc:`power` .. |GROUND| replace:: :sc:`ground` .. MBK Concepts .. |MBK| replace:: :sc:`mbk` .. |LOFIG| replace:: :cb:`Lofig` .. |PHFIG| replace:: :cb:`Phfig` .. |SxLib| replace:: :sc:`SxLib` .. Hurricane Concepts. .. |hypernet| replace:: *hypernet* .. |hypernets| replace:: *hypernets* .. |Cell| replace:: *Cell* .. |Rings| replace:: *Rings* .. |QuadTrees| replace:: *QuadTrees* .. |Collections| replace:: *Collections* .. |ap| replace:: :cb:`ap` .. |vst| replace:: :cb:`vst` .. |kgr| replace:: :cb:`kgr` .. |dot_conf| replace:: :cb:`.conf` ===================== Coriolis User's Guide ===================== .. contents:: |newpage| Credits & License ================= .. raw:: html

Hurricane Rémy Escassut & Christian Masson


Mauka Christophe Alexandre


Stratus Sophie Belloeil


Knik Damien Dupuis


Kite, Unicorn Jean-Paul Chaput


.. raw:: latex \begin{center}\begin{minipage}[t]{.8\textwidth} \noindent\DUrole{sc}{Hurricane} \dotfill Rémy \DUrole{sc}{Escassut} \& Christian \DUrole{Masson} \\ \noindent\DUrole{sc}{Mauka} \dotfill Christophe \DUrole{sc}{Alexandre} \\ \noindent\DUrole{sc}{Stratus} \dotfill Sophie \DUrole{sc}{Belloeil} \\ \noindent\DUrole{sc}{Knik} \dotfill Damien \DUrole{sc}{Dupuis} \\ \noindent\DUrole{sc}{Kite}, \DUrole{sc}{Unicorn} \dotfill Jean-Paul \DUrole{sc}{Chaput} \\ \end{minipage}\end{center} |medskip| The |Hurricane| data-base is copyright© |Bull| 2000-2012 and is released under the terms of the |LGPL| license. All other tools are copyright© |UPMC| 2008-2012 and released under the |GPL| license. The |Knik| router makes use of the |Flute| software, which is copyright© Chris C. N. |Chu| from the Iowa State University (http://home.eng.iastate.edu/~cnchu/). |newpage| Release Notes ============= Release 1.0.1475 ~~~~~~~~~~~~~~~~ This is the first preliminary release of the |Coriolis2| framework. This release mainly ships the global router |Knik| and the detailed router |Kite|. Together they aim to replace the |Alliance| |Nero| router. Unlike |Nero|, |Kite| is based on an innovating routing modeling and ad-hoc algorithm. Although it is released under |GPL| license, the source code will be avalaible later. |medskip| |noindent| Contents of this release: 1. A graphical user interface (viewer only). 2. The |Knik| global router. 3. The |Kite| detailed router. |noindent| Supported input/output formats: * |Alliance| |vst| (netlist) & |ap| (physical) formats. * Even if there are some references to the |Cadence| |LEFDEF| format, its support is not included because it depends on a library only available to |Si2| affiliated members. Release 1.0.1963 ~~~~~~~~~~~~~~~~ Release 1963 is alpha. All the tools from |Coriolis1| have been ported into this release. |noindent| Contents of this release: #. The |Stratus| netlist capture language (|GenLib| replacement). #. The |Mauka| placer (still contains bugs). #. A graphical user interface (viewer only). #. The |Knik| global router. #. The |Kite| detailed router. #. Partially implemented python support for configuration files (alternative to |XML|). #. A documentation (imcomplete/obsoleted in |Hurricane|'s case). Release 1.0.2049 ~~~~~~~~~~~~~~~~ Release `2049` is Alpha. |noindent| Changes of this release: #. The |Hurricane| documentation is now accurate. Documentation for the Cell viewer and |CRLcore| has been added. #. More extensive Python support for all the components of |Coriolis|. #. Configuration is now completly migrated under Python. |XML| loaders can still be useds for compatibilty. #. The |cgt| main has been rewritten in Python. |newpage| Installation ============ Binary packages avalaible: +-----------------------+----------------------------------------------+ | Distribution | Package | +=======================+==============================================+ | |Scientific Linux| 6 | | coriolis2-1.0.2049-1.slsoc6.i686.rpm_ | | | | coriolis2-1.0.2049-1.slsoc6.x86_64.rpm_ | +-----------------------+----------------------------------------------+ | |Fedora| 16 | | coriolis2-1.0.2049-1.fc16.i686.rpm_ | | | | coriolis2-1.0.2049-1.fc16.x86_64.rpm_ | +-----------------------+----------------------------------------------+ | |Ubuntu| 10.04 LTS | | `coriolis2_1.0-2049-1_.i386.rpm (10.04)`_ | | | | `coriolis2_1.0-2049-1_.amd64.rpm (10.04)`_ | +-----------------------+----------------------------------------------+ | |Ubuntu| 12.04 LTS | | `coriolis2_1.0-2049-1_.i386.rpm (12.04)`_ | | | | `coriolis2_1.0-2049-1_.amd64.rpm (12.04)`_ | +-----------------------+----------------------------------------------+ Older version can be found here: http://asim.lip6.fr/pub/coriolis/2.0 . If you are installing from source, you should go to section `Installation From Sources`_. |newpage| Documentation ============= The general index of the documentation for the various parts of Coriolis are avalaibles here file:///usr/share/doc/coriolis2/index.html . Coriolis Configuration & Initialisation ======================================= All configuration & initialization files are Python scripts, despite their |dot_conf| extention. From a syntactic point of view, there is no difference between the system-wide configuration files and the user's configuration, they may use the same Python helpers. |medskip| |noindent| The initialization process is done by executing, in order, the following file(s): +-------+----------------------------------+----------------------------------------------+ | Order | Meaning | File | +=======+==================================+==============================================+ | **1** | The system initialization | :cb:`/etc/coriolis2/coriolisInit.py` | +-------+----------------------------------+----------------------------------------------+ | **2** | The user's global initialization | :cb:`${HOME}/.coriolis2.conf` | +-------+----------------------------------+----------------------------------------------+ | **3** | The user's local initialization | :cb:`/.coriolis2.conf` | +-------+----------------------------------+----------------------------------------------+ .. note:: *The loading policy is not hard-coded.* It is implemented at Python level in :cb:`coriolisInit.py`, and thus may be easyly be amended to whatever site policy. The truly mandatory requirement is the existence of :cb:`coriolisInit.py` which *must* contain a :cb:`coriolisConfigure()` function with no argument. Configuration Helpers ~~~~~~~~~~~~~~~~~~~~~ To ease the writing of configuration files, a set of small helpers is available. They allow to setup the configuration parameters through simple assembly of tuples. |Alliance| Helper ----------------- The configuration file must provide a :cb:`allianceConfig` tuple of the form: :: cellsTop = '/soc/alliance/cells/' allianceConfig = \ ( ( 'SYMBOLIC_TECHNOLOGY', helpers.sysConfDir+'/technology.symbolic.xml' ) , ( 'REAL_TECHNOLOGY' , helpers.sysConfDir+'/technology.cmos130.s2r.xml') , ( 'DISPLAY' , helpers.sysConfDir+'/display.xml' ) , ( 'CATALOG' , 'CATAL') , ( 'WORKING_LIBRARY' , '.') , ( 'SYSTEM_LIBRARY' , ( (cellsTop+'sxlib' , Environment.Append) , (cellsTop+'dp_sxlib', Environment.Append) , (cellsTop+'ramlib' , Environment.Append) , (cellsTop+'romlib' , Environment.Append) , (cellsTop+'rflib' , Environment.Append) , (cellsTop+'rf2lib' , Environment.Append) , (cellsTop+'pxlib' , Environment.Append) ) ) , ( 'SCALE_X' , 100) , ( 'IN_LO' , 'vst') , ( 'IN_PH' , 'ap') , ( 'OUT_LO' , 'vst') , ( 'OUT_PH' , 'ap') , ( 'POWER' , 'vdd') , ( 'GROUND' , 'vss') , ( 'CLOCK' , '^ck.*') , ( 'BLOCKAGE' , '^blockageNet*') ) |noindent| The example above shows the system configuration file, with all the available settings. Some important remarks about thoses settings: * In it's configuration file, the user do not need to redefine all the settings, just the one he wants to change. In most of the cases, the ``SYSTEM_LIBRARY``, the ``WORKING_LIBRARY`` and the special net names (at this point there is not much alternatives for the others settings). * ``SYSTEM_LIBRARY`` setting: Setting up the library search path. Each library entry in the tuple will be added to the search path according to the second parameter: * :cb:`Environment::Append`: append to the search path. * :cb:`Environment::Prepend`: insert in head of the search path. * :cb:`Environment::Replace`: look for a library of the same name and replace it, whithout changing the search path order. If no library of that name already exists, it is appended. A library is identified by it's name, this name is the last component of the path name. For instance: ``/soc/alliance/sxlib`` will be named ``sxlib``. Implementing the |Alliance| specification, when looking for a |Cell| ``name``, the system will browse sequentially trought the library list and returns the first |Cell| whose name match. * For ``POWER``, ``GROUND``, ``CLOCK`` and ``BLOCKAGE`` net names, a regular expression (|GNU| regexp) is expected. * The ``helpers.sysConfDir`` variable is supplied by the helpers, it is the directory in which the system-wide configuration files are locateds. For a standard installation it would be: ``/soc/coriolis2``. * Trick and naming convention about ``SYMBOLIC_TECHNOLOGY``, ``REAL_TECHNOLOGY`` and ``DISPLAY``. In the previous releases, thoses files where to read by |XML| parsers, and still do if you triggers the |XML| compatibility mode. But now, they have Python conterparts. In the configuration files, you still have to name them as |XML| files, the Python file name will be deduced from this one with thoses two translation rules: #. In the filename, all dots, except for the last (the file extention), are replaced by underscores. #. The ``.xml`` extention is substituted by a ``.conf``. For the symbolic technology, it would give: :: /soc/coriolis2/technology.symbolic.xml --> /soc/coriolis2/technology_symbolic.conf A typical user's configuration file would be: :: import os homeDir = os.getenv('HOME') allianceConfig = \ ( ('WORKING_LIBRARY' , homeDir+'/worklib') , ('SYSTEM_LIBRARY' , ( (homeDir+'/mylib', Environment.Append) ) ) , ('POWER' , 'vdd.*') , ('GROUND' , 'vss.*') ) Tools Configuration Helpers --------------------------- All the tools uses the same helper to load their configuration (a.k.a. *Configuration Helper*). Currently the following configuration system-wide configuration files are defined: * :cb:`misc.conf`: commons settings or not belonging specifically to a tool. * :cb:`nimbus.conf`: for the |Nimbus| tool. * :cb:`hMetis.conf`: for the |hMetis| wrapper. * :cb:`mauka.conf`: for the |Mauka| tool. * :cb:`kite.conf`: for the |Kite| tool. * :cb:`stratus1.conf`: for the |stratus1| tool. Here is the contents of :cb:`mauka.conf`: :: # Mauka parameters. parametersTable = \ ( ('mauka.annealingBinMult' , TypePercentage, 5 ) , ('mauka.annealingNetMult' , TypePercentage, 90 ) , ('mauka.annealingRowMult' , TypePercentage, 5 ) , ('mauka.ignorePins' , TypeBool , False ) , ('mauka.insertFeeds' , TypeBool , True ) , ('mauka.plotBins' , TypeBool , True ) , ('mauka.searchRatio' , TypePercentage, 50 ) , ('mauka.standardAnnealing', TypeBool , False ) ) layoutTable = \ ( (TypeTab , 'Mauka', 'mauka') # Mauka part. , (TypeOption, "mauka.standardAnnealing", "Standart Annealing" , 0 ) , (TypeOption, "mauka.ignorePins" , "Ignore Pins" , 0 ) , (TypeOption, "mauka.plotBins" , "Plot Bins" , 0 ) , (TypeOption, "mauka.insertFeeds" , "Insert Feeds" , 0 ) , (TypeOption, "mauka.searchRatio" , "Search Ratio (%)" , 1 ) , (TypeOption, "mauka.annealingNetMult" , "Annealing Net Mult (%)", 1 ) , (TypeOption, "mauka.annealingBinMult" , "Annealing Bin Mult (%)", 1 ) , (TypeOption, "mauka.annealingRowMult" , "Annealing Row Mult (%)", 1 ) , (TypeRule ,) ) Taxonomy of the file: * It must contains, at least, the two tables: * ``parametersTable``, defines & initialise the configuration variables. * ``layoutTables``, defines how the various parameters will be displayed in the configuration window * The ``parametersTable``, is a tuple (list) of tuples. Each entry in the list describe a configuration parameter. In it's simplest form, it's a quadruplet :cb:`(TypeOption, 'paramId', ParameterType, DefaultValue)` with: #. ``TypeOption``, tells that this tuple describe a parameter. #. ``paramId``, the identifier of the parameter. Identifiers are defined by the tools. The list of parameters is detailed in each tool section. #. ``ParameterType``, the kind of parameter. Could be: * ``TypeBool``, boolean. * ``TypeInt``, signed integer. * ``TypeEnumerate``, enumerated type, needs extra entry. * ``TypePercentage``, percentage, expressed between 0 and 100. * ``TypeDouble``, float. * ``TypeString``, character string. #. ``DefaultValue``, the default value for that parameter. CGT - The Graphical Interface ============================= The |Coriolis| graphical interface is split up into two windows. * The **Viewer**, with the following features: * Basic load/save capabilities. * Display the current working cell. Could be empty if the design is not yet placed. * Execute Stratus Scripts. * Menu to run the tools (placement, routage). Features are detailed in `Viewer & Tools`_. |ViewerSnapShot_1| * The **Controller**, which allows: * Tweak what is displayer by the *Viewer*. Through the *Look*, *Filter* and *Layers&Gos* tabs. * Browse the |netlist| with eponym tab. * Show the list of selected objects (if any) with *selection* * Walk through the Database, the Cell or the Selection with *Inspector*. This is an advanced feature, reserved for experimented users. * The tab *Settings* which give access to all the settings. They are closely related to Configuration & Initialisation. |ControllerSnapShot_1| .. _Viewer & Tools: Viewer & Tools ============== The |Hurricane| Data-Base ~~~~~~~~~~~~~~~~~~~~~~~~~ The |Alliance| flow is based on the |MBK| data-base, which has one data-structure for each view. That is, |LOFIG| for the *logical* view and |PHFIG| for the *physical* view. The place and route tools were responsible for maintaining (or not) the coherency between views. Reflecting this weak coupling between views, each one was stored in a separate file with a specific format. The *logical* view is stored in a |vst| file in |VHDL| format and the *physical* in an |ap| file in an ad-hoc format. The |Coriolis| flow is based on the |Hurricane| data-base, which has a unified structure for *logical* and *physical* view. That data structure is the |Cell| object. The |Cell| can have any state between pure netlist and completly placed and routed design. Although the memory representation of the views has deeply changed we still use the |Alliance| files format, but they now really represent views of the same object. The point is that one must be very careful about view coherency when going to and from |Coriolis|. As for the first release, |Coriolis| can be used only for two purposes : * **Routing a design**, in that case the |netlist| view and the |layout| view must be present and |layout| view must contain a placement. Both views must have the same name. When saving the routed design, it is advised to change the design name otherwise the original unrouted placement in the |layout| view will be overwritten. * **Viewing a design**, the |netlist| view must be present, if a |layout| view is present it still must have the same name but it can be in any state. Mauka -- Placer ~~~~~~~~~~~~~~~ Mauka makes uses of hMetis. To be completed... .. note:: *Instance Duplication Problem:* a same logical instance cannot have two different placements. So, either you manually make a clone of it or you supply a placement for it. This is currently a drawback of our *folded hierarchy* approach. Knik -- Global Router ~~~~~~~~~~~~~~~~~~~~~ The global router is (not yet) deterministic. To circumvent this limitation, a global routing (also called a *solution*) can be saved to disk and reloaded for later uses. A global routing is saved into a file with the same name as the design and a |kgr| extention. It is in `Box Router`_ output format. For an in-depth description of |Knik| algorithms, you may download the thesis of D. |Dupuis| avalaible from here~: `Knik Thesis`_. |medskip| |noindent| Menus: * |menu_P&R| |rightarrow| |menu_StepByStep| |rightarrow| |menu_KiteSaveGlobalRouting|. * |menu_P&R| |rightarrow| |menu_StepByStep| |rightarrow| |menu_KiteLoadGlobalRouting|. Kite -- Detailed Router ~~~~~~~~~~~~~~~~~~~~~~~ |Kite| no longer suffers from the limitations of |Nero|. It can route big designs as its runtime and memory footprint is almost linear (with respect to the number of gates). It has successfully routed design of more than `150K` gates. |medskip| |noindent| However, this first release has the following restrictions: * Works only with |SxLib| standard cell gauge. * Works always with 4 routing metal layers (`M2` through `M5`). * Do not allow (take into account) pre-routed wires on signals other than |POWER| or |GROUND|. After each run, |Kite| displays a set of *completion ratios* which must all be equal to `100%` if the detailed routing has been successfull. In the event of a failure, on saturated design, you may decrease the `edge saturation ration` (argument `--edge`) to balance more evenly the design saturation. That is, the maximum saturation decrease at the price of a wider saturated area and increased wirelength. |newpage| Routing a design is done in three ordered steps: #. Global routing |menu_P&R| |rightarrow| |menu_StepByStep| |rightarrow| |menu_KiteGlobalRoute|. #. Detailed routing |menu_P&R| |rightarrow| |menu_StepByStep| |rightarrow| |menu_KiteDetailedRoute|. #. Finalize routing |menu_P&R| |rightarrow| |menu_StepByStep| |rightarrow| |menu_KiteFinalizeRoute|. After the detailed routing step the |Kite| data-structure is still active. The wiring is thus represented in a way that allows |Kite| to manage it but which is not completly finished. The finalize step performs the removal of the |Kite| data-structure and finish/cleanup the wiring so that its connex in the sense of |Hurricane|. *Do not* try to save your design before that step, you would get gaps in it. The complete description of |Kite| parameters are described in `Detailed Routing Configuration Parameters`_. .. _Python Scripts in Cgt: Executing Python Scripts in Cgt ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Python/Stratus scripts can be executed either in text or graphical mode. .. note:: *How Cgt Locates Python Scripts.* |cgt| uses the Python ``import`` mechanism to load Python scripts. So you must give the name of your script whitout ``.py`` extention and it must be reachable through the ``PYTHONPATH``. You may uses the dotted module notation. A Python/Stratus script must contains a function called ``StratusScript`` with one optional argument, the graphical editor into which it may be running (will be set to ``None`` in text mode). Any script given on the command line will be run immediatly *after* the initializations and *before* any other argument is processed. Small example of Python/Stratus script: :: from status import * def doSomething (): # ... return def StratusScript ( editor=None ): if globals().has_key ( "__editor" ): editor = __editor if editor: setEditor ( editor ) doSomething() return if __name__ == "__main__" : StratusScript () This script could be run directly with Python (thanks to the two last lines) or through |cgt| in both text and graphical modes. Printing & Snapshots ~~~~~~~~~~~~~~~~~~~~ Printing or saving into a |pdf| is fairly simple, just uses the **File -> Print** menu or the |Key_CTRL| |Plus| |Key_p| shortcut to open the dialog box. The print functionality uses exactly the same rendering mechanism as for the screen, beeing almost *WYSIWYG*. Thus, to obtain the best results it is advisable to select the ``Coriolis.Printer`` look (in the *Controller*), which uses a white background and much suited for high resolutions ``32x32`` pixels patterns There is also two mode of printing selectable through the *Controller* **Settings -> Misc -> Printer/Snapshot Mode**: =============== ================= ===================================================== Mode DPI (approx.) Intended Usage --------------- ----------------- ----------------------------------------------------- **Cell Mode** 150 For single ``Cell`` printing or very small designs. Patterns will be bigger and more readable. **Design Mode** 300 For designs (mostly commposed of wires and cells outlines). =============== ================= ===================================================== .. note:: *The pdf file size* Be aware that the generated |pdf| files are indeed only pixmaps. So they can grew very large if you select paper format above ``A2`` or similar. |noindent| Saving into an image is subject to the same remarks as for |pdf|. Memento of Shortcuts in Graphic Mode ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The main application binary is |cgt|. +---------------+-------------------+-----------------------------------------------------------+ | Category | Keys | Action | +===============+===================+===========================================================+ | **Moves** | | |Key_Up|, | Shift the view in the according direction | | | |Key_Down| | | | | | |Key_Left|, | | | | |Key_Right| | | +---------------+-------------------+-----------------------------------------------------------+ | **Fit** | |Key_f| | Fit to the Cell abutment box | +---------------+-------------------+-----------------------------------------------------------+ | **Refresh** | |Key_CTRL| | Triggers a complete display redraw | | | |Plus| |Key_l| | | +---------------+-------------------+-----------------------------------------------------------+ | **Goto** | |Key_g| | *apperture* is the minimum side of the area | | | | displayed around the point to go to. It's an | | | | alternative way of setting the zoom level | +---------------+-------------------+-----------------------------------------------------------+ | **Zoom** | |Key_z|, | Respectively zoom by a 2 factor and *unzoom* | | | |Key_m| | by a 2 factor | | +-------------------+-----------------------------------------------------------+ | | | |BigMouse| | You can perform a zoom to an area. | | | | Area Zoom | Define the zoom area by *holding down the left | | | | mouse button* while moving the mouse. | +---------------+-------------------+-----------------------------------------------------------+ | **Selection** | | |BigMouse| | You can select displayed objects under an area. | | | | Area Selection | Define the selection area by *holding down the | | | | right mouse button* while moving the mouse. | | +-------------------+-----------------------------------------------------------+ | | | |BigMouse| | You can toggle the selection of one object under | | | | Toggle Selection| the mouse position by pressing |key_CTRL| and | | | | pressing down *the right mouse button*. A popup | | | | list of what's under the position shows up into | | | | which you can toggle the selection state of one | | | | item. | | +-------------------+-----------------------------------------------------------+ | | |Key_S| | Toggle the selection visibility | +---------------+-------------------+-----------------------------------------------------------+ | **Controller**| |Key_CTRL| | Show/hide the controller window. | | | |Plus| |Key_i| | | | | | | | | | It's the Swiss Army Knife of the viewer. | | | | From it, you can fine-control the display and | | | | inspect almost everything in your design. | +---------------+-------------------+-----------------------------------------------------------+ | **Rulers** | |Key_k|, | One stroke on |Key_k| enters the ruler mode, in | | | |Key_ESC| | which you can draw one ruler. You can exit the | | | | ruler mode by pressing |Key_ESC|. Once in ruler | | | | mode, the first click on the *left mouse button* | | | | sets the ruler's starting point and the second | | | | click the ruler's end point. The second click | | | | exits automatically the ruler mode. | | +-------------------+-----------------------------------------------------------+ | | |Key_K| | Clears all the drawn rulers | +---------------+-------------------+-----------------------------------------------------------+ | **Print** | |Key_CTRL| | Currently rather crude. It's a direct copy of | | | |Plus| |Key_p| | what's displayed in pixels. So the resulting | | | | picture will be a little blurred due to | | | | anti-aliasing mechanism. | +---------------+-------------------+-----------------------------------------------------------+ | **Open/Close**| |Key_CTRL| | Opens a new design. The design name must be | | | |Plus| |Key_o| | given without path or extention. | | +-------------------+-----------------------------------------------------------+ | | |Key_CTRL| | Close the current viewer window, but do not quit | | | |Plus| |Key_w| | the application. | | +-------------------+-----------------------------------------------------------+ | | |Key_CTRL| | `CTRL+Q` quit the application | | | |Plus| |Key_q| | (closing all windows). | +---------------+-------------------+-----------------------------------------------------------+ | **Hierarchy** | |Key_CTRL| |Plus| | Go one hierarchy level down. That is, if there | | | |Key_Down| | is an *instance* under the cursor position, load | | | | it's *model* Cell in place of the current one. | | +-------------------+-----------------------------------------------------------+ | | |Key_CTRL| |Plus| | Go one hierarchy level up. if we have entered | | | |Key_Up| | the current model through |Key_CTRL| |Plus| | | | | |Key_Down|, reload the previous model (the one | | | | in which this model is instanciated). | +---------------+-------------------+-----------------------------------------------------------+ Cgt Command Line Options ~~~~~~~~~~~~~~~~~~~~~~~~ Appart from the obvious ``--text`` options, all can be used for text and graphical mode. +-----------------------------+------------------------------------------------+ | Arguments | Meaning | +=============================+================================================+ | `-t|--text` | Instruct |cgt| to run in text mode. | +-----------------------------+------------------------------------------------+ | `-L|--log-mode` | Disable the uses of |ANSI| escape sequence on | | | the |tty|. Useful when the output is | | | redirected to a file. | +-----------------------------+------------------------------------------------+ | `-c |--cell=` | The name of the design to load, without | | | leading path or extention. | +-----------------------------+------------------------------------------------+ | `-g|--load-global` | Reload a global routing solution from disk. | | | The file containing the solution must be named | | | `.kgr`. | +-----------------------------+------------------------------------------------+ | `--save-global` | Save the global routing solution, into a file | | | named `.kgr`. | +-----------------------------+------------------------------------------------+ | `-e |--edge=` | Change the edge capacity for the global | | | router, between 0 and 1 (|Knik|). | +-----------------------------+------------------------------------------------+ | `-G|--global-route` | Run the global router (|Knik|). | +-----------------------------+------------------------------------------------+ | `-R|--detailed-route` | Run the detailed router (|Kite|). | +-----------------------------+------------------------------------------------+ | `-s|--save-design=` | The design into which the routed layout will | | | be saved. It is strongly recommanded to choose | | | a different name from the source (unrouted) | | | design. | +-----------------------------+------------------------------------------------+ | `--events-limit=` | The maximal number of events after which the | | | router will stops. This is mainly a failsafe | | | against looping. The limit is sets to 4 | | | millions of iteration which should suffice to | | | any design of `100K`. gates. For bigger | | | designs you may wants to increase this limit. | +-----------------------------+------------------------------------------------+ | `--stratus-script=` | Run the Python/Stratus script ``module``. | | | See `Python Scripts in Cgt`_. | +-----------------------------+------------------------------------------------+ Some Examples : * Run both global and detailed router, then save the routed design : :: > cgt -v -t -G -R --cell=design --save-design=design_kite * Load a previous global solution, run the detailed router, then save the routed design : :: > cgt -v -t --load-global -R --cell=design --save-design=design_kite * Run the global router, then save the global routing solution : :: > cgt -v -t -G --save-global --cell=design .. _The Controller: The Controller ============== The *Controller* window is composed of seven tabs: #. `The Look Tab`_ to select the display style. #. `The Filter Tab`_ the hierarchical levels to be displayed, the look of rubbers and the dimension units. #. `The Layers&Go Tab`_ to selectively hide/display layers. #. `The Netlist Tab`_ to browse through the |netlist|. Works in association with the *Selection* tab. #. `The Selection Tab`_ allow to view all the currently selected elements. #. `The Inspector Tab`_ browse through either the DataBase, the Cell or the current selection. #. `The Settings Tab`_ access all the tool's configuration settings. .. _The Look Tab: The Look Tab ~~~~~~~~~~~~ You can select how the layout will be displayed. There is a special one ``Printer.Coriolis`` specifically designed for `Printing & Snapshots`_. You should select it prior to calling the print or snapshot dialog boxes. |ControllerLook_1| .. _The Filter Tab: The Filter Tab ~~~~~~~~~~~~~~ The filter tab let you select what hierarchical levels of your design will be displayed. Hierarchy level are numbered top-down: the level 0 correspond to the top-level cell, the level one to the instances of the top-level Cell and so on. There are also check boxes to enable/disable the processing of Terminal Cell, Master Cells and Compnents. The processing of Terminal Cell (hierarchy leaf cells) is disabled by default when you load a hierarchical design and enabled when you load a single Cell. You can choose what kind of form to give to the rubbers and the type of unit used to display coordinates. .. note:: *What are Rubbers:* |Hurricane| uses *Rubbers* to materialize physical gaps in net topology. That is, if some wires are missing to connect two or more parts of net, a *rubber* will be drawn between them to signal the gap. For example, after the detailed routing no *rubbers* should remains. They have been made *very* visibles as big violet lines... |ControllerFilter_1| .. _The Layers&Go Tab: The Layers&Go Tab ~~~~~~~~~~~~~~~~~ Control the individual display of all *layers* and *Gos*. * *Layers* correspond to a true physical layer. From a |Hurricane| point of view they are all the *BasicLayers* (could be matched to GDSII). * *Gos* stands from *Graphical Objects*, they are drawings that have no physical existence but are added by the various tools to display extra information. One good exemple is the density map of the detailed router, to easily locate congested areas. For each layer/Go there are two check boxes: * The normal one triggers the display. * The red-outlined allows objects of that layer to be selectable or not. |ControllerLayersGos_1| .. _The Netlist Tab: The Netlist Tab ~~~~~~~~~~~~~~~ The *Netlist* tab shows the list of nets... By default the tab is not *synched* with the displayed Cell. To see the nets you must check the **Sync Netlist** checkbox. You can narrow the set of displayed nets by using the filter pattern (supports regular expressions). An very useful feature is to enable the **Sync Selection**, which will automatically select all the components of the selected net(s). You can select multiple nets. In the figure the net ``auxsc35`` is selected and is highlited in the *Viewer*. |ControllerNetlist_1| |ViewerNetlist_1| .. _The Selection Tab: The Selection Tab ~~~~~~~~~~~~~~~~~ The *Selection* tab list all the components currently selecteds. They can be filtered thanks to the filter pattern. Used in conjunction with the *Netlist* **Sync Selection** you will all see all the components part of *net*. In this list, you can toggle individually the selection of component by pressing the ``t`` key. When unselected in this way a component is not removed from the the selection list but instead displayed in red italic. To see where a component is you may make it blink by repeatedly press the ``t`` key... |ControllerSelection_1| .. _The Inspector Tab: The Inspector Tab ~~~~~~~~~~~~~~~~~ This tab is very useful, but mostly for |Coriolis| developpers. It allows to browse through the live DataBase. The *Inspector* provide three entry points: * **DataBase**: Starts from the whole |Hurricane| DataBase. * **Cell**: Inspect the currently loaded Cell. * **Selection**: Inspect the object currently highlited in the *Selection* tab. Once an entry point has been activated, you may recursively expore all it's fields using the right/left arrows. .. note:: *Do not put your fingers in the socket:* when inspecting anything, do not modify the DataBase. If the any object under inspection is deleted, you will crash the application... .. note:: *Implementation Detail:* the inspector support is done with ``Slot``, ``Record`` and ``getString()``. |ControllerInspector_1| |ControllerInspector_2| |ControllerInspector_3| .. _The Settings Tab: The Settings Tab ~~~~~~~~~~~~~~~~ Here comes the description of the *Settings* tab. |ControllerSettings_1| Tools Fine Tuning ================= .. _`Detailed Routing Configuration Parameters`: Detailed Routing Configuration Parameters ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +---------------------------------------+------------------+-----------+ | Parameter Identifier | Type | Default | +=======================================+==================+===========+ | **Katabatic Parameters** | +---------------------------------------+------------------+-----------+ | | ``katabatic.globalLengthThreshold`` | | TypeInt | | 1450 | | | ``katabatic.saturateRatio`` | | TypePercentage | | 80 | | | ``katabatic.saturateRp`` | | TypeInt | | 8 | | | ``kite.borderRipupLimit`` | | TypeInt | | 26 | +---------------------------------------+------------------+-----------+ | **Kite Parameters** | +---------------------------------------+------------------+-----------+ | | ``kite.edgeCapacity`` | | TypePercentage | | 65 | | | ``kite.eventsLimit`` | | TypeInt | | 4000002 | | | ``kite.ripupCost`` | | TypeInt | | 3 | | | ``kite.globalRipupLimit`` | | TypeInt | | 5 | | | ``kite.localRipupLimit`` | | TypeInt | | 7 | | | ``kite.longGlobalRipupLimit`` | | TypeInt | | 5 | | | ``kite.strapRipupLimit`` | | TypeInt | | 16 | | | ``kite.metal1MinBreak`` | | TypeDouble | | 100 | | | ``kite.metal2MinBreak`` | | TypeDouble | | 100 | | | ``kite.metal3MinBreak`` | | TypeDouble | | 100 | | | ``kite.metal4MinBreak`` | | TypeDouble | | 1450 | | | ``kite.metal5MinBreak`` | | TypeDouble | | 1450 | | | ``kite.metal6MinBreak`` | | TypeDouble | | 1450 | | | ``kite.metal7MinBreak`` | | TypeDouble | | 1450 | +---------------------------------------+------------------+-----------+ .. _Installation from Sources: Installation from Sources ========================= Installation from source is done differently than what is done in the packaging procedure. The archive is also structured differently and meant to be unpacked and compiled under a user's home directory. Main building prerequisites: * cmake * g++ * boost * libxml2 * yacc & lex. * Qt 4 * LEF/DEF (optional). * hMetis (optional). * doxygen. * latex * latex2html. * python-docutils (for reStructuredText). Simple building procedure: :: dummy@lepka:~$ tar jxvf coriolis2-1.0-20121103.tar.bz2 dummy@lepka:~$ cd coriolis-2.x/src dummy@lepka:src$ ./bootstrap/buildCoriolis.py \ --project=bootstrap --project=vlsisapd --project=coriolis \ --make="-j4 install" dummy@lepka:src$ ./bootstrap/buildCoriolis.py \ --project=bootstrap --project=vlsisapd --project=coriolis \ --doc --make="-j1 install" Installation is done according to the following tree structure: ========================= ========================================================================= Linux, SL 6, 32 bits ~/coriolis-2.x/Linux.slsoc6x/Release.Shared/install Linux, SL 6, 64 bits ~/coriolis-2.x/Linux.slsoc6x_64/Release.Shared/install FreeBSD 8, 32 bits ~/coriolis-2.x/FreeBSD.8x.i386/Release.Shared/install FreeBSD 8, 64 bits ~/coriolis-2.x/FreeBSD.8x.amd64/Release.Shared/install ========================= ========================================================================= .. note:: *Alternate build types:* the ``Release.Shared`` means an optimized build with shared libraries. But there are also available ``Static`` instead of ``Shared`` and ``Debug`` instead of ``Release`` and any combination of them. ``Static`` do not work because I don't know yet to mix statically linked binaries and Python modules (which must be dynamic). Environment Helper ~~~~~~~~~~~~~~~~~~ To simplify the tedious task of configuring your environment, a helper is provided in the ``bootstrap`` source directory: :: ~/coriolis-2.x/src/bootstrap/coriolisEnv.py Use it like this: :: dummy@lepka:~> eval `~/coriolis-2.x/src/bootstrap/coriolisEnv.py`