Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
|
|
|
|
|
// -*- C++ -*-
|
|
|
|
|
//
|
|
|
|
|
// This file is part of the Coriolis Software.
|
|
|
|
|
// Copyright (c) UPMC 2008-2013, All Rights Reserved
|
|
|
|
|
//
|
|
|
|
|
// +-----------------------------------------------------------------+
|
|
|
|
|
// | C O R I O L I S |
|
|
|
|
|
// | K i t e - D e t a i l e d R o u t e r |
|
|
|
|
|
// | |
|
|
|
|
|
// | Author : Jean-Paul CHAPUT |
|
|
|
|
|
// | E-mail : Jean-Paul.Chaput@asim.lip6.fr |
|
|
|
|
|
// | =============================================================== |
|
|
|
|
|
// | C++ Module : "./Tracks.cpp" |
|
|
|
|
|
// +-----------------------------------------------------------------+
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#include <iostream>
|
|
|
|
|
#include "katana/Track.h"
|
|
|
|
|
#include "katana/Tracks.h"
|
|
|
|
|
#include "katana/RoutingPlane.h"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
namespace Katana {
|
|
|
|
|
|
|
|
|
|
using std::cerr;
|
|
|
|
|
using std::endl;
|
|
|
|
|
using Hurricane::tab;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
// -------------------------------------------------------------------
|
|
|
|
|
// Class : "Tracks_Range::Locator".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tracks_Range::Locator::Locator ( const RoutingPlane* routingPlane
|
|
|
|
|
, const Interval& constraints
|
|
|
|
|
)
|
|
|
|
|
: Hurricane::Locator<Track*>()
|
|
|
|
|
, _constraints (constraints)
|
|
|
|
|
{
|
Support for symmetric routing in Anabatic/Katabatic.
* New: In Katana::SegmentFsm, the object is now able to handle two events
at the same time. The master and it's symmetric. When there is no
symmetric, the corresponing data is just left blank. This makes a
bigger object, but as there is only one when running, it is not an
issue.
Candidates tracks are now an vector of array<2> (pairs), the
TrackCost::Compare() functor has to be wrapped through CompareCostArray.
The compined TrackCost of the two tracks is accumulated into the first
element.
Everything related to events gets duplicated: _event is now _event1
and _event2, and so on.
As there can be now two Manipulator actions done with SegmentFsm,
this class now completly hide the Manipulator level from the
RoutingEvent processing.
New function ::bindToTrack() to perform the track insertion.
* New: In Katana::TrackCost, add a new ::merge() function.
* New: In Katana::TrackElement and Katana::TrackSegment, add symmetric
management. Allows to know if a TrackElement has a symmetric and to
access it.
* New: In Katana::DataSymmetric, add new overload for ::getSymmetrical()
to handle DbU::Unit and intervals.
* Change: In Katana::RoutingEvent, remove all direct uses of Manipulator
objects. Now any change to the event associated segment must go through
call to Segment Fsm.
* Change: In Katana, adjust the debug level so internal informations are
put below level 156.
* New: In Hurricane::DbU, in ::getValueString(), special display when the
value is Min or Max (more helpful than a gigantic number).
2017-04-30 16:46:33 -05:00
|
|
|
cdebug_log(155,0) << "Tracks_Range::Locator()" << endl;
|
|
|
|
|
cdebug_log(155,0) << "* Constraints: " << _constraints << endl;
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
|
|
|
|
|
_track = routingPlane->getTrackByPosition ( _constraints.getVMin() );
|
2017-05-22 17:20:31 -05:00
|
|
|
cdebug_log(155,0) << "* Nearest track: " << _track << endl;;
|
|
|
|
|
cdebug_log(155,0) << "* axis:" << _track->getAxis() << " vmin:" << _constraints.getVMin() << endl;
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
|
|
|
|
|
if ( _track and (_track->getAxis() < _constraints.getVMin()) ) _track = _track->getNextTrack();
|
|
|
|
|
if ( _track and (_track->getAxis() > _constraints.getVMax()) ) _track = NULL;
|
|
|
|
|
|
Support for symmetric routing in Anabatic/Katabatic.
* New: In Katana::SegmentFsm, the object is now able to handle two events
at the same time. The master and it's symmetric. When there is no
symmetric, the corresponing data is just left blank. This makes a
bigger object, but as there is only one when running, it is not an
issue.
Candidates tracks are now an vector of array<2> (pairs), the
TrackCost::Compare() functor has to be wrapped through CompareCostArray.
The compined TrackCost of the two tracks is accumulated into the first
element.
Everything related to events gets duplicated: _event is now _event1
and _event2, and so on.
As there can be now two Manipulator actions done with SegmentFsm,
this class now completly hide the Manipulator level from the
RoutingEvent processing.
New function ::bindToTrack() to perform the track insertion.
* New: In Katana::TrackCost, add a new ::merge() function.
* New: In Katana::TrackElement and Katana::TrackSegment, add symmetric
management. Allows to know if a TrackElement has a symmetric and to
access it.
* New: In Katana::DataSymmetric, add new overload for ::getSymmetrical()
to handle DbU::Unit and intervals.
* Change: In Katana::RoutingEvent, remove all direct uses of Manipulator
objects. Now any change to the event associated segment must go through
call to Segment Fsm.
* Change: In Katana, adjust the debug level so internal informations are
put below level 156.
* New: In Hurricane::DbU, in ::getValueString(), special display when the
value is Min or Max (more helpful than a gigantic number).
2017-04-30 16:46:33 -05:00
|
|
|
cdebug_log(155,0) << "_track: " << _track << endl;;
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tracks_Range::Locator::Locator ( const Locator& locator )
|
|
|
|
|
: Hurricane::Locator<Track*>()
|
|
|
|
|
, _constraints(locator._constraints)
|
|
|
|
|
, _track (locator._track)
|
|
|
|
|
{ }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hurricane::Locator<Track*>* Tracks_Range::Locator::getClone () const
|
|
|
|
|
{ return new Locator(*this); }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
bool Tracks_Range::Locator::isValid () const
|
|
|
|
|
{ return (_track != NULL); }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Track* Tracks_Range::Locator::getElement () const
|
2017-05-22 17:20:31 -05:00
|
|
|
{
|
|
|
|
|
cdebug_log(155,0) << "Tracks_Range::Locator::getElement() - " << _track << endl;;
|
|
|
|
|
return _track;
|
|
|
|
|
}
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
void Tracks_Range::Locator::progress ()
|
|
|
|
|
{
|
2017-05-22 17:20:31 -05:00
|
|
|
if (not _track) return;
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
|
|
|
|
|
_track = _track->getNextTrack();
|
|
|
|
|
if ( _track and (_track->getAxis() > _constraints.getVMax()) ) _track = NULL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
string Tracks_Range::Locator::_getString () const
|
|
|
|
|
{
|
|
|
|
|
string s = "<Tracks_Range::Locator ["
|
|
|
|
|
+ DbU::getValueString(_constraints.getVMin()) + ":"
|
|
|
|
|
+ DbU::getValueString(_constraints.getVMax()) + "] "
|
|
|
|
|
+ getString(_track) + ">";
|
|
|
|
|
return s;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
// -------------------------------------------------------------------
|
|
|
|
|
// Class : "Tracks_Range".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tracks Tracks_Range::get ( RoutingPlane* routingPlane
|
|
|
|
|
, Interval& constraints )
|
|
|
|
|
{ return new Tracks_Range ( routingPlane, constraints ); }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tracks_Range::Tracks_Range ( const RoutingPlane* routingPlane
|
|
|
|
|
, const Interval& constraints )
|
|
|
|
|
: Collection<Track*>()
|
|
|
|
|
, _routingPlane(routingPlane)
|
|
|
|
|
, _constraints (constraints)
|
|
|
|
|
{ }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tracks_Range::Tracks_Range ( const Tracks_Range& tracks )
|
|
|
|
|
: Collection<Track*>()
|
|
|
|
|
, _routingPlane(tracks._routingPlane)
|
|
|
|
|
, _constraints (tracks._constraints)
|
|
|
|
|
{ }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Collection<Track*>* Tracks_Range::getClone () const
|
|
|
|
|
{ return new Tracks_Range(*this); }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hurricane::Locator<Track*>* Tracks_Range::getLocator () const
|
|
|
|
|
{ return new Locator(_routingPlane,_constraints); }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
string Tracks_Range::_getString () const
|
|
|
|
|
{
|
|
|
|
|
string s = "<" + _TName("Tracks_Range") + " "
|
|
|
|
|
+ getString(_routingPlane->getLayer()) + " ["
|
|
|
|
|
+ getString(_constraints.getVMin()) + ":"
|
|
|
|
|
+ getString(_constraints.getVMax()) + "]"
|
|
|
|
|
+ ">";
|
|
|
|
|
return s;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
// -------------------------------------------------------------------
|
|
|
|
|
// Class : "Tracks_Spiral::Locator".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tracks_Spiral::Locator::Locator ( const RoutingPlane* routingPlane
|
|
|
|
|
, const Interval& optimal
|
|
|
|
|
, const Interval& constraints
|
|
|
|
|
)
|
|
|
|
|
: Hurricane::Locator<Track*>()
|
|
|
|
|
, _optimal (optimal)
|
|
|
|
|
, _constraints (constraints)
|
|
|
|
|
, _onMin (false)
|
|
|
|
|
, _inMinOptimal(true)
|
|
|
|
|
, _inMaxOptimal(true)
|
|
|
|
|
{
|
Support for symmetric routing in Anabatic/Katabatic.
* New: In Katana::SegmentFsm, the object is now able to handle two events
at the same time. The master and it's symmetric. When there is no
symmetric, the corresponing data is just left blank. This makes a
bigger object, but as there is only one when running, it is not an
issue.
Candidates tracks are now an vector of array<2> (pairs), the
TrackCost::Compare() functor has to be wrapped through CompareCostArray.
The compined TrackCost of the two tracks is accumulated into the first
element.
Everything related to events gets duplicated: _event is now _event1
and _event2, and so on.
As there can be now two Manipulator actions done with SegmentFsm,
this class now completly hide the Manipulator level from the
RoutingEvent processing.
New function ::bindToTrack() to perform the track insertion.
* New: In Katana::TrackCost, add a new ::merge() function.
* New: In Katana::TrackElement and Katana::TrackSegment, add symmetric
management. Allows to know if a TrackElement has a symmetric and to
access it.
* New: In Katana::DataSymmetric, add new overload for ::getSymmetrical()
to handle DbU::Unit and intervals.
* Change: In Katana::RoutingEvent, remove all direct uses of Manipulator
objects. Now any change to the event associated segment must go through
call to Segment Fsm.
* Change: In Katana, adjust the debug level so internal informations are
put below level 156.
* New: In Hurricane::DbU, in ::getValueString(), special display when the
value is Min or Max (more helpful than a gigantic number).
2017-04-30 16:46:33 -05:00
|
|
|
cdebug_log(155,0) << "Tracks_Spiral::Locator()" << endl;
|
|
|
|
|
cdebug_log(155,0) << "* Optimal: " << _optimal << endl;
|
|
|
|
|
cdebug_log(155,0) << "* Constraints: " << _constraints << endl;
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
|
|
|
|
|
_minTrack = _maxTrack = routingPlane->getTrackByPosition ( _optimal.getCenter() );
|
|
|
|
|
|
|
|
|
|
if ( _minTrack->getAxis() < _constraints.getVMin() ) _minTrack = NULL;
|
|
|
|
|
if ( _maxTrack->getAxis() > _constraints.getVMax() ) _maxTrack = NULL;
|
|
|
|
|
|
|
|
|
|
if ( _minTrack && !_maxTrack ) {
|
|
|
|
|
_minTrack = _minTrack->getPreviousTrack();
|
|
|
|
|
if (_minTrack->getAxis() < _constraints.getVMin()) _minTrack = NULL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if ( _maxTrack && !_minTrack ) {
|
|
|
|
|
_maxTrack = _maxTrack->getNextTrack();
|
|
|
|
|
if ( _maxTrack->getAxis() > _constraints.getVMax() ) _maxTrack = NULL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if ( _minTrack && (_minTrack->getAxis() < _optimal.getVMin()) ) _inMinOptimal = false;
|
|
|
|
|
if ( _maxTrack && (_maxTrack->getAxis() > _optimal.getVMax()) ) _inMaxOptimal = false;
|
|
|
|
|
|
Support for symmetric routing in Anabatic/Katabatic.
* New: In Katana::SegmentFsm, the object is now able to handle two events
at the same time. The master and it's symmetric. When there is no
symmetric, the corresponing data is just left blank. This makes a
bigger object, but as there is only one when running, it is not an
issue.
Candidates tracks are now an vector of array<2> (pairs), the
TrackCost::Compare() functor has to be wrapped through CompareCostArray.
The compined TrackCost of the two tracks is accumulated into the first
element.
Everything related to events gets duplicated: _event is now _event1
and _event2, and so on.
As there can be now two Manipulator actions done with SegmentFsm,
this class now completly hide the Manipulator level from the
RoutingEvent processing.
New function ::bindToTrack() to perform the track insertion.
* New: In Katana::TrackCost, add a new ::merge() function.
* New: In Katana::TrackElement and Katana::TrackSegment, add symmetric
management. Allows to know if a TrackElement has a symmetric and to
access it.
* New: In Katana::DataSymmetric, add new overload for ::getSymmetrical()
to handle DbU::Unit and intervals.
* Change: In Katana::RoutingEvent, remove all direct uses of Manipulator
objects. Now any change to the event associated segment must go through
call to Segment Fsm.
* Change: In Katana, adjust the debug level so internal informations are
put below level 156.
* New: In Hurricane::DbU, in ::getValueString(), special display when the
value is Min or Max (more helpful than a gigantic number).
2017-04-30 16:46:33 -05:00
|
|
|
cdebug_log(155,0) << "_minTrack: " << _minTrack << endl;;
|
|
|
|
|
cdebug_log(155,0) << "_maxTrack: " << _maxTrack << endl;;
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tracks_Spiral::Locator::Locator ( const Locator& locator )
|
|
|
|
|
: Hurricane::Locator<Track*>()
|
|
|
|
|
, _optimal (locator._optimal)
|
|
|
|
|
, _constraints (locator._constraints)
|
|
|
|
|
, _minTrack (locator._minTrack)
|
|
|
|
|
, _maxTrack (locator._maxTrack)
|
|
|
|
|
, _onMin (locator._onMin)
|
|
|
|
|
, _inMinOptimal(locator._inMinOptimal)
|
|
|
|
|
, _inMaxOptimal(locator._inMaxOptimal)
|
|
|
|
|
{ }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hurricane::Locator<Track*>* Tracks_Spiral::Locator::getClone () const
|
|
|
|
|
{ return new Locator(*this); }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
bool Tracks_Spiral::Locator::isValid () const
|
|
|
|
|
{ return _minTrack||_maxTrack; }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Track* Tracks_Spiral::Locator::getElement () const
|
|
|
|
|
{
|
|
|
|
|
if ( !_minTrack ) return _maxTrack;
|
|
|
|
|
if ( !_maxTrack ) return _minTrack;
|
|
|
|
|
|
|
|
|
|
return (_onMin) ? _maxTrack : _minTrack;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
bool Tracks_Spiral::Locator::InOptimal () const
|
|
|
|
|
{ return _inMinOptimal&&_inMaxOptimal; }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
void Tracks_Spiral::Locator::progress ()
|
|
|
|
|
{
|
Support for symmetric routing in Anabatic/Katabatic.
* New: In Katana::SegmentFsm, the object is now able to handle two events
at the same time. The master and it's symmetric. When there is no
symmetric, the corresponing data is just left blank. This makes a
bigger object, but as there is only one when running, it is not an
issue.
Candidates tracks are now an vector of array<2> (pairs), the
TrackCost::Compare() functor has to be wrapped through CompareCostArray.
The compined TrackCost of the two tracks is accumulated into the first
element.
Everything related to events gets duplicated: _event is now _event1
and _event2, and so on.
As there can be now two Manipulator actions done with SegmentFsm,
this class now completly hide the Manipulator level from the
RoutingEvent processing.
New function ::bindToTrack() to perform the track insertion.
* New: In Katana::TrackCost, add a new ::merge() function.
* New: In Katana::TrackElement and Katana::TrackSegment, add symmetric
management. Allows to know if a TrackElement has a symmetric and to
access it.
* New: In Katana::DataSymmetric, add new overload for ::getSymmetrical()
to handle DbU::Unit and intervals.
* Change: In Katana::RoutingEvent, remove all direct uses of Manipulator
objects. Now any change to the event associated segment must go through
call to Segment Fsm.
* Change: In Katana, adjust the debug level so internal informations are
put below level 156.
* New: In Hurricane::DbU, in ::getValueString(), special display when the
value is Min or Max (more helpful than a gigantic number).
2017-04-30 16:46:33 -05:00
|
|
|
cdebug_log(155,1) << "Track_Spiral::progress() - State:" << endl;
|
|
|
|
|
cdebug_log(155,0) << _onMin
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
<< " " << _minTrack
|
|
|
|
|
<< " " << _maxTrack << endl;
|
|
|
|
|
|
|
|
|
|
if ( !isValid() ) {
|
Support for symmetric routing in Anabatic/Katabatic.
* New: In Katana::SegmentFsm, the object is now able to handle two events
at the same time. The master and it's symmetric. When there is no
symmetric, the corresponing data is just left blank. This makes a
bigger object, but as there is only one when running, it is not an
issue.
Candidates tracks are now an vector of array<2> (pairs), the
TrackCost::Compare() functor has to be wrapped through CompareCostArray.
The compined TrackCost of the two tracks is accumulated into the first
element.
Everything related to events gets duplicated: _event is now _event1
and _event2, and so on.
As there can be now two Manipulator actions done with SegmentFsm,
this class now completly hide the Manipulator level from the
RoutingEvent processing.
New function ::bindToTrack() to perform the track insertion.
* New: In Katana::TrackCost, add a new ::merge() function.
* New: In Katana::TrackElement and Katana::TrackSegment, add symmetric
management. Allows to know if a TrackElement has a symmetric and to
access it.
* New: In Katana::DataSymmetric, add new overload for ::getSymmetrical()
to handle DbU::Unit and intervals.
* Change: In Katana::RoutingEvent, remove all direct uses of Manipulator
objects. Now any change to the event associated segment must go through
call to Segment Fsm.
* Change: In Katana, adjust the debug level so internal informations are
put below level 156.
* New: In Hurricane::DbU, in ::getValueString(), special display when the
value is Min or Max (more helpful than a gigantic number).
2017-04-30 16:46:33 -05:00
|
|
|
cdebug_tabw(155,-1);
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if ( _onMin ) {
|
|
|
|
|
_onMin = (_maxTrack == NULL);
|
|
|
|
|
if ( _minTrack ) {
|
|
|
|
|
_minTrack = _minTrack->getPreviousTrack();
|
|
|
|
|
|
|
|
|
|
if ( _minTrack ) {
|
|
|
|
|
if ( _minTrack->getAxis() < _optimal.getVMin() ) _inMinOptimal = false;
|
|
|
|
|
if ( _minTrack->getAxis() < _constraints.getVMin() ) _minTrack = NULL;
|
|
|
|
|
}
|
|
|
|
|
if ( !_minTrack && _maxTrack ) progress();
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
_onMin = (_minTrack != NULL);
|
|
|
|
|
if ( _maxTrack ) {
|
|
|
|
|
_maxTrack = _maxTrack->getNextTrack();
|
|
|
|
|
|
|
|
|
|
if ( _maxTrack ) {
|
|
|
|
|
if ( _maxTrack->getAxis() > _optimal.getVMax() ) _inMaxOptimal = false;
|
|
|
|
|
if ( _maxTrack->getAxis() > _constraints.getVMax() ) _maxTrack = NULL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if ( !_maxTrack && _minTrack ) progress();
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
Support for symmetric routing in Anabatic/Katabatic.
* New: In Katana::SegmentFsm, the object is now able to handle two events
at the same time. The master and it's symmetric. When there is no
symmetric, the corresponing data is just left blank. This makes a
bigger object, but as there is only one when running, it is not an
issue.
Candidates tracks are now an vector of array<2> (pairs), the
TrackCost::Compare() functor has to be wrapped through CompareCostArray.
The compined TrackCost of the two tracks is accumulated into the first
element.
Everything related to events gets duplicated: _event is now _event1
and _event2, and so on.
As there can be now two Manipulator actions done with SegmentFsm,
this class now completly hide the Manipulator level from the
RoutingEvent processing.
New function ::bindToTrack() to perform the track insertion.
* New: In Katana::TrackCost, add a new ::merge() function.
* New: In Katana::TrackElement and Katana::TrackSegment, add symmetric
management. Allows to know if a TrackElement has a symmetric and to
access it.
* New: In Katana::DataSymmetric, add new overload for ::getSymmetrical()
to handle DbU::Unit and intervals.
* Change: In Katana::RoutingEvent, remove all direct uses of Manipulator
objects. Now any change to the event associated segment must go through
call to Segment Fsm.
* Change: In Katana, adjust the debug level so internal informations are
put below level 156.
* New: In Hurricane::DbU, in ::getValueString(), special display when the
value is Min or Max (more helpful than a gigantic number).
2017-04-30 16:46:33 -05:00
|
|
|
cdebug_log(155,0) << _onMin
|
|
|
|
|
<< " " << _minTrack
|
|
|
|
|
<< " " << _maxTrack << endl;
|
|
|
|
|
cdebug_tabw(155,-1);
|
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah!
* Bug: In Hurricane, in StaticObservable::getObserver(), if the slot
pointer is NULL, do not try to access the owner. Returns NULL, so
the caller can be aware of the situation...
* Change: In Hurricane, in BreakpointWidget & ExceptionWidget some
cosmetic changes (fonts and window sizes).
* Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account
the constraints from the source AutoContact, as it holds the constraints
transmitted by the RoutingPads and sets up by propageConstraintsFromRp().
It is likely to be a bug affecting the original Katabatic as well.
* Change: In Anabatic, in RawGCellsUnder(), check that the segment is not
completly oustside the cell abutment box and truncate the coordinates
to the part that is inside. Use the "shrink" if we reach the east/north
border.
* Change: In Anabatic, in Configuration, no more decorator because we will
use a true derived relationship. Katana *derives* from *Anabatic* and do
not *decorate* it, so the Configuration can do the same. It also implies
that we directly create a Katana engine, not an Anabatic one.
* Change: In Anabatic, in Session, do not allow the opening of the Session
in a standalone fashion (with a static method). Instead it must be opened
using the relevant method of the Anabatic/Katana engine. This ensure we
are opening the right Session type.
* Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment
is not part of the collection by default, but will be included if the
Flags::WithSelf is set.
* Change: In Configuration, all the flags value are now defined in two steps.
Declared in the header and initialized in the module. This is to prevent
the fact that on some cases, in relation with the Python "extern C" part
modules, we need a true allocated variable. It was causing weird linking
problems.
A side effect is that they can no longer be used as entry is switches,
have to replace them by if/else.
* New: In Anabatic, new GCell::getNeighborAt() utility function.
* Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with
the grid type... Back annote all the edges capacity (north & east) with
the reserved local capacity.
* New: Complete portage of Kite over Anabatic. The new engine is christened
"Katana" for Kite-Analogic. When it's capabilities and performances
will be on a part with Kite, it is to completly replace it (and take
back the "Kite" name). Preliminary tests seems to show that, contrary
to intuition (because built on a more complex/slower grid), it is even
slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
string Tracks_Spiral::Locator::_getString () const
|
|
|
|
|
{
|
|
|
|
|
string s = "<Tracks_Spiral::Locator ["
|
|
|
|
|
+ getString(_minTrack) + ":"
|
|
|
|
|
+ getString(_maxTrack) + "]"
|
|
|
|
|
+ getString(_onMin)
|
|
|
|
|
+ ">";
|
|
|
|
|
return s;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
// -------------------------------------------------------------------
|
|
|
|
|
// Class : "Tracks_Spiral".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tracks Tracks_Spiral::get ( RoutingPlane* routingPlane
|
|
|
|
|
, Interval& optimal
|
|
|
|
|
, Interval& constraints )
|
|
|
|
|
{ return new Tracks_Spiral ( routingPlane, optimal, constraints ); }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tracks_Spiral::Tracks_Spiral ( const RoutingPlane* routingPlane
|
|
|
|
|
, const Interval& optimal
|
|
|
|
|
, const Interval& constraints )
|
|
|
|
|
: Collection<Track*>()
|
|
|
|
|
, _routingPlane(routingPlane)
|
|
|
|
|
, _optimal (optimal)
|
|
|
|
|
, _constraints (constraints)
|
|
|
|
|
{ }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tracks_Spiral::Tracks_Spiral ( const Tracks_Spiral& tracks )
|
|
|
|
|
: Collection<Track*>()
|
|
|
|
|
, _routingPlane(tracks._routingPlane)
|
|
|
|
|
, _optimal (tracks._optimal)
|
|
|
|
|
, _constraints (tracks._constraints)
|
|
|
|
|
{ }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Collection<Track*>* Tracks_Spiral::getClone () const
|
|
|
|
|
{ return new Tracks_Spiral(*this); }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hurricane::Locator<Track*>* Tracks_Spiral::getLocator () const
|
|
|
|
|
{ return new Locator(_routingPlane,_optimal,_constraints); }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
string Tracks_Spiral::_getString () const
|
|
|
|
|
{
|
|
|
|
|
string s = "<" + _TName("Tracks_Spiral") + " "
|
|
|
|
|
+ getString(_routingPlane->getLayer()) + " ["
|
|
|
|
|
+ getString(_constraints.getVMin()) + " ("
|
|
|
|
|
+ getString(_optimal.getVMin()) + ":"
|
|
|
|
|
+ getString(_optimal.getVMax()) + ") "
|
|
|
|
|
+ getString(_constraints.getVMax()) + "]"
|
|
|
|
|
+ ">";
|
|
|
|
|
return s;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
} // Katana namespace.
|