113 lines
3.8 KiB
ArmAsm
113 lines
3.8 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
|
|
/***************************************************************************
|
|
* Copyright (C) 2019 by Andreas Bolsch *
|
|
* andreas.bolsch@mni.thm.de *
|
|
***************************************************************************/
|
|
|
|
.text
|
|
.syntax unified
|
|
.cpu cortex-m0
|
|
.thumb
|
|
.thumb_func
|
|
|
|
/* Params:
|
|
* r0 - total count (bytes), crc32 (out)
|
|
* r1 - flash page size
|
|
* r2 - address offset into flash
|
|
* r3 - OCTOSPI io_base
|
|
|
|
* Clobbered:
|
|
* r4 - tmp
|
|
* r5 - address of OCTOSPI_DR
|
|
* r6 - address of OCTOSPI_CCR
|
|
* r7 - tmp
|
|
*/
|
|
|
|
#include "../../../../src/flash/nor/stmqspi.h"
|
|
|
|
#define OCTOSPI_CCR_CCR (OCTOSPI_CCR - OCTOSPI_CCR)
|
|
#define OCTOSPI_TCR_CCR (OCTOSPI_TCR - OCTOSPI_CCR)
|
|
#define OCTOSPI_IR_CCR (OCTOSPI_IR - OCTOSPI_CCR)
|
|
|
|
.macro octospi_abort
|
|
movs r5, #(1<<SPI_ABORT) /* abort bit mask */
|
|
ldr r7, [r3, #OCTOSPI_CR] /* get OCTOSPI CR register */
|
|
orrs r7, r7, r5 /* set abort bit */
|
|
str r7, [r3, #OCTOSPI_CR] /* store new CR register */
|
|
.endm
|
|
|
|
.macro wait_busy
|
|
0:
|
|
ldr r7, [r3, #OCTOSPI_SR] /* load status */
|
|
lsrs r7, r7, #(SPI_BUSY+1) /* shift BUSY into C */
|
|
bcs 0b /* loop until BUSY cleared */
|
|
movs r7, #(1<<SPI_TCF) /* TCF bitmask */
|
|
str r7, [r3, #OCTOSPI_FCR] /* clear TCF flag */
|
|
.endm
|
|
|
|
start:
|
|
subs r0, r0, #1 /* decrement count for DLR */
|
|
subs r1, r1, #1 /* page size mask and for DLR */
|
|
movs r4, #0x00 /* initialize crc */
|
|
mvns r4, r4 /* to 0xFFFFFFFF */
|
|
start_read:
|
|
octospi_abort /* start in clean state */
|
|
movs r5, #OCTOSPI_DR /* load OCTOSPI_DR address offset */
|
|
adds r5, r5, r3 /* address of OCTOSPI_DR */
|
|
movs r6, #OCTOSPI_CCR-OCTOSPI_DR /* load OCTOSPI_CCR address offset */
|
|
adds r6, r6, r5 /* address of OCTOSPI_CCR */
|
|
wait_busy
|
|
ldr r7, cr_page_read /* indirect read mode */
|
|
str r7, [r3, #OCTOSPI_CR] /* set mode */
|
|
mov r7, r2 /* get current start address */
|
|
orrs r7, r7, r1 /* end of current page */
|
|
subs r7, r7, r2 /* count-1 to end of page */
|
|
cmp r7, r0 /* if this count <= remaining */
|
|
bls write_dlr /* then read to end of page */
|
|
mov r7, r0 /* else read all remaining */
|
|
write_dlr:
|
|
str r7, [r3, #OCTOSPI_DLR] /* size-1 in DLR register */
|
|
ldr r7, ccr_page_read /* CCR for read */
|
|
str r7, [r6, #OCTOSPI_CCR_CCR] /* initiate transfer */
|
|
ldr r7, tcr_page_read /* TCR for read */
|
|
str r7, [r6, #OCTOSPI_TCR_CCR] /* instruction */
|
|
ldr r7, ir_page_read /* IR for read */
|
|
str r7, [r6, #OCTOSPI_IR_CCR] /* instruction */
|
|
str r2, [r3, #OCTOSPI_AR] /* store SPI start address */
|
|
ldr r6, =0x04C11DB7 /* CRC32 polynomial */
|
|
read_loop:
|
|
ldrb r7, [r5] /* read next byte from DR */
|
|
lsls r7, r7, #24 /* shift into msb */
|
|
eors r4, r4, r7
|
|
.rept 8 /* unrolled bit loop */
|
|
asrs r7, r4, #31 /* copy bit 31 into bits 0 to 31 */
|
|
ands r7, r7, r6 /* r7 neg. -> CRC32XOR, pos. -> 0x0 */
|
|
lsls r4, r4, #1 /* shift result */
|
|
eors r4, r4, r7 /* eor by CRC32XOR or 0x0 */
|
|
.endr
|
|
adds r2, r2, #1 /* increment address */
|
|
subs r0, r0, #1 /* decrement (count-1) */
|
|
bmi exit /* stop if no data left */
|
|
tst r2, r1 /* page end ? */
|
|
bne read_loop /* if not, then next byte */
|
|
page_end:
|
|
bal start_read /* then next page */
|
|
.pool
|
|
|
|
exit:
|
|
mvns r0, r4 /* invert to get final result */
|
|
octospi_abort /* to idle state */
|
|
.align 2 /* align to word, bkpt is 4 words */
|
|
bkpt #0 /* before code end for exit_point */
|
|
.align 2 /* align to word */
|
|
|
|
cr_page_read:
|
|
.space 4 /* OCTOSPI_CR value for read command */
|
|
ccr_page_read:
|
|
.space 4 /* OCTOSPI_CCR value for read command */
|
|
tcr_page_read:
|
|
.space 4 /* OCTOSPI_TCR value for read command */
|
|
ir_page_read:
|
|
.space 4 /* OCTOSPI_IR value for read command */
|