riscv-openocd/src
Jose de Sousa 5bc0dc0c9d target: write gmon.out according to target endianness
After profiling gmon.out was being written in little endian format only
which would cause gprof to issue and error and exit on big endian targets.

Change-Id: I526a40adae0f9a439fc5b77cef30fda228198b48
Signed-off-by: Jose de Sousa <jose.t.de.sousa@gmail.com>
Reviewed-on: http://openocd.zylin.com/2168
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11 15:27:18 +00:00
..
flash mini51: support for Nuvoton NuMicro M051 series flash memory 2015-02-11 15:23:09 +00:00
helper configure: define WIN32_LEAN_AND_MEAN early to make it effective 2015-02-04 21:56:55 +00:00
jtag jlink: Added hardware version number for JLink firmware on LPC-Link2 2015-02-11 15:10:53 +00:00
pld update files to correct FSF address 2013-06-05 19:52:42 +00:00
rtos ChibiOS: struct ChibiOS_params_list[] should not be const 2015-01-09 08:56:10 +00:00
server gdb_server: Include current RTOS thread in signal packets 2014-09-29 20:11:59 +00:00
svf Openocd: svf: Add ability to ignore svf_check_tdo errors 2014-07-03 18:08:48 +00:00
target target: write gmon.out according to target endianness 2015-02-11 15:27:18 +00:00
transport transport: clarify error message when transport is not selected 2015-01-09 08:48:18 +00:00
xsvf update files to correct FSF address 2013-06-05 19:52:42 +00:00
Makefile.am Makefile.am: link libusb-1.0 after libusb-0.1 to fix dependencies 2015-02-04 21:56:45 +00:00
hello.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
hello.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
main.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
openocd.c Fix some problems with the bin2char utility 2014-08-02 09:01:32 +00:00
openocd.h Fix some problems with the bin2char utility 2014-08-02 09:01:32 +00:00