interesting
/
riscv-openocd
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
riscv-openocd/src/flash/nor/fespi.c

1051 lines
27 KiB
C
Raw Blame History

/***************************************************************************
* Copyright (C) 2010 by Antonio Borneo <borneo.antonio@gmail.com> *
* Modified by Megan Wachs <megan@sifive.com> from the original stmsmi.c *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
/* The Freedom E SPI controller is a SPI bus controller
* specifically designed for SPI Flash Memories on Freedom E platforms.
*
* Two working modes are available:
* - SW mode: the SPI is controlled by SW. Any custom commands can be sent
* on the bus. Writes are only possible in this mode.
* - HW mode: Memory content is directly
* accessible in CPU memory space. CPU can read and execute memory content.
*/
/* ATTENTION:
* To have flash memory mapped in CPU memory space, the controller
* must have "HW mode" enabled.
* 1) The command "reset init" has to initialize the controller and put
* it in HW mode (this is actually the default out of reset for Freedom E systems).
* 2) every command in this file have to return to prompt in HW mode. */
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "imp.h"
#include "spi.h"
#include <jtag/jtag.h>
#include <helper/time_support.h>
#include <target/algorithm.h>
#include "target/riscv/riscv.h"
/* Register offsets */
#define FESPI_REG_SCKDIV 0x00
#define FESPI_REG_SCKMODE 0x04
#define FESPI_REG_CSID 0x10
#define FESPI_REG_CSDEF 0x14
#define FESPI_REG_CSMODE 0x18
#define FESPI_REG_DCSSCK 0x28
#define FESPI_REG_DSCKCS 0x2a
#define FESPI_REG_DINTERCS 0x2c
#define FESPI_REG_DINTERXFR 0x2e
#define FESPI_REG_FMT 0x40
#define FESPI_REG_TXFIFO 0x48
#define FESPI_REG_RXFIFO 0x4c
#define FESPI_REG_TXCTRL 0x50
#define FESPI_REG_RXCTRL 0x54
#define FESPI_REG_FCTRL 0x60
#define FESPI_REG_FFMT 0x64
#define FESPI_REG_IE 0x70
#define FESPI_REG_IP 0x74
/* Fields */
#define FESPI_SCK_POL 0x1
#define FESPI_SCK_PHA 0x2
#define FESPI_FMT_PROTO(x) ((x) & 0x3)
#define FESPI_FMT_ENDIAN(x) (((x) & 0x1) << 2)
#define FESPI_FMT_DIR(x) (((x) & 0x1) << 3)
#define FESPI_FMT_LEN(x) (((x) & 0xf) << 16)
/* TXCTRL register */
#define FESPI_TXWM(x) ((x) & 0xffff)
/* RXCTRL register */
#define FESPI_RXWM(x) ((x) & 0xffff)
#define FESPI_IP_TXWM 0x1
#define FESPI_IP_RXWM 0x2
#define FESPI_FCTRL_EN 0x1
#define FESPI_INSN_CMD_EN 0x1
#define FESPI_INSN_ADDR_LEN(x) (((x) & 0x7) << 1)
#define FESPI_INSN_PAD_CNT(x) (((x) & 0xf) << 4)
#define FESPI_INSN_CMD_PROTO(x) (((x) & 0x3) << 8)
#define FESPI_INSN_ADDR_PROTO(x) (((x) & 0x3) << 10)
#define FESPI_INSN_DATA_PROTO(x) (((x) & 0x3) << 12)
#define FESPI_INSN_CMD_CODE(x) (((x) & 0xff) << 16)
#define FESPI_INSN_PAD_CODE(x) (((x) & 0xff) << 24)
/* Values */
#define FESPI_CSMODE_AUTO 0
#define FESPI_CSMODE_HOLD 2
#define FESPI_CSMODE_OFF 3
#define FESPI_DIR_RX 0
#define FESPI_DIR_TX 1
#define FESPI_PROTO_S 0
#define FESPI_PROTO_D 1
#define FESPI_PROTO_Q 2
#define FESPI_ENDIAN_MSB 0
#define FESPI_ENDIAN_LSB 1
/* Timeout in ms */
#define FESPI_CMD_TIMEOUT (100)
#define FESPI_PROBE_TIMEOUT (100)
#define FESPI_MAX_TIMEOUT (3000)
struct fespi_flash_bank {
int probed;
target_addr_t ctrl_base;
const struct flash_device *dev;
};
struct fespi_target {
char *name;
uint32_t tap_idcode;
uint32_t ctrl_base;
};
/* TODO !!! What is the right naming convention here? */
static const struct fespi_target target_devices[] = {
/* name, tap_idcode, ctrl_base */
{ "Freedom E310-G000 SPI Flash", 0x10e31913 , 0x10014000 },
{ "Freedom E310-G002 SPI Flash", 0x20000913 , 0x10014000 },
{ NULL, 0, 0 }
};
FLASH_BANK_COMMAND_HANDLER(fespi_flash_bank_command)
{
struct fespi_flash_bank *fespi_info;
LOG_DEBUG("%s", __func__);
if (CMD_ARGC < 6)
return ERROR_COMMAND_SYNTAX_ERROR;
fespi_info = malloc(sizeof(struct fespi_flash_bank));
if (fespi_info == NULL) {
LOG_ERROR("not enough memory");
return ERROR_FAIL;
}
bank->driver_priv = fespi_info;
fespi_info->probed = 0;
fespi_info->ctrl_base = 0;
if (CMD_ARGC >= 7) {
COMMAND_PARSE_ADDRESS(CMD_ARGV[6], fespi_info->ctrl_base);
LOG_DEBUG("ASSUMING FESPI device at ctrl_base = " TARGET_ADDR_FMT,
fespi_info->ctrl_base);
}
return ERROR_OK;
}
static int fespi_read_reg(struct flash_bank *bank, uint32_t *value, target_addr_t address)
{
struct target *target = bank->target;
struct fespi_flash_bank *fespi_info = bank->driver_priv;
int result = target_read_u32(target, fespi_info->ctrl_base + address, value);
if (result != ERROR_OK) {
LOG_ERROR("fespi_read_reg() error at " TARGET_ADDR_FMT,
fespi_info->ctrl_base + address);
return result;
}
return ERROR_OK;
}
static int fespi_write_reg(struct flash_bank *bank, target_addr_t address, uint32_t value)
{
struct target *target = bank->target;
struct fespi_flash_bank *fespi_info = bank->driver_priv;
int result = target_write_u32(target, fespi_info->ctrl_base + address, value);
if (result != ERROR_OK) {
LOG_ERROR("fespi_write_reg() error writing 0x%x to " TARGET_ADDR_FMT,
value, fespi_info->ctrl_base + address);
return result;
}
return ERROR_OK;
}
static int fespi_disable_hw_mode(struct flash_bank *bank)
{
uint32_t fctrl;
if (fespi_read_reg(bank, &fctrl, FESPI_REG_FCTRL) != ERROR_OK)
return ERROR_FAIL;
return fespi_write_reg(bank, FESPI_REG_FCTRL, fctrl & ~FESPI_FCTRL_EN);
}
static int fespi_enable_hw_mode(struct flash_bank *bank)
{
uint32_t fctrl;
if (fespi_read_reg(bank, &fctrl, FESPI_REG_FCTRL) != ERROR_OK)
return ERROR_FAIL;
return fespi_write_reg(bank, FESPI_REG_FCTRL, fctrl | FESPI_FCTRL_EN);
}
static int fespi_set_dir(struct flash_bank *bank, bool dir)
{
uint32_t fmt;
if (fespi_read_reg(bank, &fmt, FESPI_REG_FMT) != ERROR_OK)
return ERROR_FAIL;
return fespi_write_reg(bank, FESPI_REG_FMT,
(fmt & ~(FESPI_FMT_DIR(0xFFFFFFFF))) | FESPI_FMT_DIR(dir));
}
static int fespi_txwm_wait(struct flash_bank *bank)
{
int64_t start = timeval_ms();
while (1) {
uint32_t ip;
if (fespi_read_reg(bank, &ip, FESPI_REG_IP) != ERROR_OK)
return ERROR_FAIL;
if (ip & FESPI_IP_TXWM)
break;
int64_t now = timeval_ms();
if (now - start > 1000) {
LOG_ERROR("ip.txwm didn't get set.");
return ERROR_TARGET_TIMEOUT;
}
}
return ERROR_OK;
}
static int fespi_tx(struct flash_bank *bank, uint8_t in)
{
int64_t start = timeval_ms();
while (1) {
uint32_t txfifo;
if (fespi_read_reg(bank, &txfifo, FESPI_REG_TXFIFO) != ERROR_OK)
return ERROR_FAIL;
if (!(txfifo >> 31))
break;
int64_t now = timeval_ms();
if (now - start > 1000) {
LOG_ERROR("txfifo stayed negative.");
return ERROR_TARGET_TIMEOUT;
}
}
return fespi_write_reg(bank, FESPI_REG_TXFIFO, in);
}
static int fespi_rx(struct flash_bank *bank, uint8_t *out)
{
int64_t start = timeval_ms();
uint32_t value;
while (1) {
if (fespi_read_reg(bank, &value, FESPI_REG_RXFIFO) != ERROR_OK)
return ERROR_FAIL;
if (!(value >> 31))
break;
int64_t now = timeval_ms();
if (now - start > 1000) {
LOG_ERROR("rxfifo didn't go positive (value=0x%x).", value);
return ERROR_TARGET_TIMEOUT;
}
}
if (out)
*out = value & 0xff;
return ERROR_OK;
}
/* TODO!!! Why don't we need to call this after writing? */
static int fespi_wip(struct flash_bank *bank, int timeout)
{
int64_t endtime;
fespi_set_dir(bank, FESPI_DIR_RX);
if (fespi_write_reg(bank, FESPI_REG_CSMODE, FESPI_CSMODE_HOLD) != ERROR_OK)
return ERROR_FAIL;
endtime = timeval_ms() + timeout;
fespi_tx(bank, SPIFLASH_READ_STATUS);
if (fespi_rx(bank, NULL) != ERROR_OK)
return ERROR_FAIL;
do {
alive_sleep(1);
fespi_tx(bank, 0);
uint8_t rx;
if (fespi_rx(bank, &rx) != ERROR_OK)
return ERROR_FAIL;
if ((rx & SPIFLASH_BSY_BIT) == 0) {
if (fespi_write_reg(bank, FESPI_REG_CSMODE, FESPI_CSMODE_AUTO) != ERROR_OK)
return ERROR_FAIL;
fespi_set_dir(bank, FESPI_DIR_TX);
return ERROR_OK;
}
} while (timeval_ms() < endtime);
LOG_ERROR("timeout");
return ERROR_FAIL;
}
static int fespi_erase_sector(struct flash_bank *bank, int sector)
{
struct fespi_flash_bank *fespi_info = bank->driver_priv;
int retval;
retval = fespi_tx(bank, SPIFLASH_WRITE_ENABLE);
if (retval != ERROR_OK)
return retval;
retval = fespi_txwm_wait(bank);
if (retval != ERROR_OK)
return retval;
if (fespi_write_reg(bank, FESPI_REG_CSMODE, FESPI_CSMODE_HOLD) != ERROR_OK)
return ERROR_FAIL;
retval = fespi_tx(bank, fespi_info->dev->erase_cmd);
if (retval != ERROR_OK)
return retval;
sector = bank->sectors[sector].offset;
retval = fespi_tx(bank, sector >> 16);
if (retval != ERROR_OK)
return retval;
retval = fespi_tx(bank, sector >> 8);
if (retval != ERROR_OK)
return retval;
retval = fespi_tx(bank, sector);
if (retval != ERROR_OK)
return retval;
retval = fespi_txwm_wait(bank);
if (retval != ERROR_OK)
return retval;
if (fespi_write_reg(bank, FESPI_REG_CSMODE, FESPI_CSMODE_AUTO) != ERROR_OK)
return ERROR_FAIL;
retval = fespi_wip(bank, FESPI_MAX_TIMEOUT);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
}
static int fespi_erase(struct flash_bank *bank, unsigned int first,
unsigned int last)
{
struct target *target = bank->target;
struct fespi_flash_bank *fespi_info = bank->driver_priv;
int retval = ERROR_OK;
LOG_DEBUG("%s: from sector %u to sector %u", __func__, first, last);
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if ((last < first) || (last >= bank->num_sectors)) {
LOG_ERROR("Flash sector invalid");
return ERROR_FLASH_SECTOR_INVALID;
}
if (!(fespi_info->probed)) {
LOG_ERROR("Flash bank not probed");
return ERROR_FLASH_BANK_NOT_PROBED;
}
for (unsigned int sector = first; sector <= last; sector++) {
if (bank->sectors[sector].is_protected) {
LOG_ERROR("Flash sector %u protected", sector);
return ERROR_FAIL;
}
}
if (fespi_info->dev->erase_cmd == 0x00)
return ERROR_FLASH_OPER_UNSUPPORTED;
if (fespi_write_reg(bank, FESPI_REG_TXCTRL, FESPI_TXWM(1)) != ERROR_OK)
return ERROR_FAIL;
retval = fespi_txwm_wait(bank);
if (retval != ERROR_OK) {
LOG_ERROR("WM Didn't go high before attempting.");
return retval;
}
/* Disable Hardware accesses*/
if (fespi_disable_hw_mode(bank) != ERROR_OK)
return ERROR_FAIL;
/* poll WIP */
retval = fespi_wip(bank, FESPI_PROBE_TIMEOUT);
if (retval != ERROR_OK)
goto done;
for (unsigned int sector = first; sector <= last; sector++) {
retval = fespi_erase_sector(bank, sector);
if (retval != ERROR_OK)
goto done;
keep_alive();
}
/* Switch to HW mode before return to prompt */
done:
if (fespi_enable_hw_mode(bank) != ERROR_OK)
return ERROR_FAIL;
return retval;
}
static int fespi_protect(struct flash_bank *bank, int set,
unsigned int first, unsigned int last)
{
for (unsigned int sector = first; sector <= last; sector++)
bank->sectors[sector].is_protected = set;
return ERROR_OK;
}
static int slow_fespi_write_buffer(struct flash_bank *bank,
const uint8_t *buffer, uint32_t offset, uint32_t len)
{
uint32_t ii;
if (offset & 0xFF000000) {
LOG_ERROR("FESPI interface does not support greater than 3B addressing, can't write to offset 0x%x",
offset);
return ERROR_FAIL;
}
/* TODO!!! assert that len < page size */
fespi_tx(bank, SPIFLASH_WRITE_ENABLE);
fespi_txwm_wait(bank);
if (fespi_write_reg(bank, FESPI_REG_CSMODE, FESPI_CSMODE_HOLD) != ERROR_OK)
return ERROR_FAIL;
fespi_tx(bank, SPIFLASH_PAGE_PROGRAM);
fespi_tx(bank, offset >> 16);
fespi_tx(bank, offset >> 8);
fespi_tx(bank, offset);
for (ii = 0; ii < len; ii++)
fespi_tx(bank, buffer[ii]);
fespi_txwm_wait(bank);
if (fespi_write_reg(bank, FESPI_REG_CSMODE, FESPI_CSMODE_AUTO) != ERROR_OK)
return ERROR_FAIL;
keep_alive();
return ERROR_OK;
}
static const uint8_t algorithm_bin[] = {
#include "../../../contrib/loaders/flash/fespi/fespi.inc"
};
#define STEP_EXIT 4
#define STEP_TX 8
#define STEP_TXWM_WAIT 12
#define STEP_WRITE_REG 16
#define STEP_WIP_WAIT 20
#define STEP_SET_DIR 24
#define STEP_NOP 0xff
struct algorithm_steps {
unsigned size;
unsigned used;
uint8_t **steps;
};
static struct algorithm_steps *as_new(void)
{
struct algorithm_steps *as = calloc(1, sizeof(struct algorithm_steps));
as->size = 8;
as->steps = malloc(as->size * sizeof(as->steps[0]));
return as;
}
static struct algorithm_steps *as_delete(struct algorithm_steps *as)
{
for (unsigned step = 0; step < as->used; step++) {
free(as->steps[step]);
as->steps[step] = NULL;
}
free(as->steps);
free(as);
return NULL;
}
static int as_empty(struct algorithm_steps *as)
{
for (unsigned s = 0; s < as->used; s++) {
if (as->steps[s][0] != STEP_NOP)
return 0;
}
return 1;
}
/* Return size of compiled program. */
static unsigned as_compile(struct algorithm_steps *as, uint8_t *target,
unsigned target_size)
{
unsigned offset = 0;
bool finish_early = false;
for (unsigned s = 0; s < as->used && !finish_early; s++) {
unsigned bytes_left = target_size - offset;
switch (as->steps[s][0]) {
case STEP_NOP:
break;
case STEP_TX:
{
unsigned size = as->steps[s][1];
if (size + 3 > bytes_left) {
finish_early = true;
break;
}
memcpy(target + offset, as->steps[s], size + 2);
offset += size + 2;
break;
}
case STEP_WRITE_REG:
if (4 > bytes_left) {
finish_early = true;
break;
}
memcpy(target + offset, as->steps[s], 3);
offset += 3;
break;
case STEP_SET_DIR:
if (3 > bytes_left) {
finish_early = true;
break;
}
memcpy(target + offset, as->steps[s], 2);
offset += 2;
break;
case STEP_TXWM_WAIT:
case STEP_WIP_WAIT:
if (2 > bytes_left) {
finish_early = true;
break;
}
memcpy(target + offset, as->steps[s], 1);
offset += 1;
break;
default:
assert(0);
}
if (!finish_early)
as->steps[s][0] = STEP_NOP;
}
assert(offset + 1 <= target_size);
target[offset++] = STEP_EXIT;
LOG_DEBUG("%d-byte program:", offset);
for (unsigned i = 0; i < offset;) {
char buf[80];
for (unsigned x = 0; i < offset && x < 16; x++, i++)
sprintf(buf + x*3, "%02x ", target[i]);
LOG_DEBUG("%s", buf);
}
return offset;
}
static void as_add_step(struct algorithm_steps *as, uint8_t *step)
{
if (as->used == as->size) {
as->size *= 2;
as->steps = realloc(as->steps, sizeof(as->steps[0]) * as->size);
LOG_DEBUG("Increased size to 0x%x", as->size);
}
as->steps[as->used] = step;
as->used++;
}
static void as_add_tx(struct algorithm_steps *as, unsigned count, const uint8_t *data)
{
LOG_DEBUG("count=%d", count);
while (count > 0) {
unsigned step_count = MIN(count, 255);
uint8_t *step = malloc(step_count + 2);
step[0] = STEP_TX;
step[1] = step_count;
memcpy(step + 2, data, step_count);
as_add_step(as, step);
data += step_count;
count -= step_count;
}
}
static void as_add_tx1(struct algorithm_steps *as, uint8_t byte)
{
uint8_t data[1];
data[0] = byte;
as_add_tx(as, 1, data);
}
static void as_add_write_reg(struct algorithm_steps *as, uint8_t offset, uint8_t data)
{
uint8_t *step = malloc(3);
step[0] = STEP_WRITE_REG;
step[1] = offset;
step[2] = data;
as_add_step(as, step);
}
static void as_add_txwm_wait(struct algorithm_steps *as)
{
uint8_t *step = malloc(1);
step[0] = STEP_TXWM_WAIT;
as_add_step(as, step);
}
static void as_add_wip_wait(struct algorithm_steps *as)
{
uint8_t *step = malloc(1);
step[0] = STEP_WIP_WAIT;
as_add_step(as, step);
}
static void as_add_set_dir(struct algorithm_steps *as, bool dir)
{
uint8_t *step = malloc(2);
step[0] = STEP_SET_DIR;
step[1] = FESPI_FMT_DIR(dir);
as_add_step(as, step);
}
/* This should write something less than or equal to a page.*/
static int steps_add_buffer_write(struct algorithm_steps *as,
const uint8_t *buffer, uint32_t chip_offset, uint32_t len)
{
if (chip_offset & 0xFF000000) {
LOG_ERROR("FESPI interface does not support greater than 3B addressing, can't write to offset 0x%x",
chip_offset);
return ERROR_FAIL;
}
as_add_tx1(as, SPIFLASH_WRITE_ENABLE);
as_add_txwm_wait(as);
as_add_write_reg(as, FESPI_REG_CSMODE, FESPI_CSMODE_HOLD);
uint8_t setup[] = {
SPIFLASH_PAGE_PROGRAM,
chip_offset >> 16,
chip_offset >> 8,
chip_offset,
};
as_add_tx(as, sizeof(setup), setup);
as_add_tx(as, len, buffer);
as_add_txwm_wait(as);
as_add_write_reg(as, FESPI_REG_CSMODE, FESPI_CSMODE_AUTO);
/* fespi_wip() */
as_add_set_dir(as, FESPI_DIR_RX);
as_add_write_reg(as, FESPI_REG_CSMODE, FESPI_CSMODE_HOLD);
as_add_wip_wait(as);
as_add_write_reg(as, FESPI_REG_CSMODE, FESPI_CSMODE_AUTO);
as_add_set_dir(as, FESPI_DIR_TX);
return ERROR_OK;
}
static int steps_execute(struct algorithm_steps *as,
struct flash_bank *bank, struct working_area *algorithm_wa,
struct working_area *data_wa)
{
struct target *target = bank->target;
struct fespi_flash_bank *fespi_info = bank->driver_priv;
uint32_t ctrl_base = fespi_info->ctrl_base;
int xlen = riscv_xlen(target);
struct reg_param reg_params[2];
init_reg_param(&reg_params[0], "a0", xlen, PARAM_OUT);
init_reg_param(&reg_params[1], "a1", xlen, PARAM_OUT);
buf_set_u64(reg_params[0].value, 0, xlen, ctrl_base);
buf_set_u64(reg_params[1].value, 0, xlen, data_wa->address);
int retval = ERROR_OK;
while (!as_empty(as)) {
keep_alive();
uint8_t *data_buf = malloc(data_wa->size);
unsigned bytes = as_compile(as, data_buf, data_wa->size);
retval = target_write_buffer(target, data_wa->address, bytes,
data_buf);
free(data_buf);
if (retval != ERROR_OK) {
LOG_ERROR("Failed to write data to " TARGET_ADDR_FMT ": %d",
data_wa->address, retval);
goto exit;
}
retval = target_run_algorithm(target, 0, NULL, 2, reg_params,
algorithm_wa->address, algorithm_wa->address + 4,
10000, NULL);
if (retval != ERROR_OK) {
LOG_ERROR("Failed to execute algorithm at " TARGET_ADDR_FMT ": %d",
algorithm_wa->address, retval);
goto exit;
}
}
exit:
destroy_reg_param(&reg_params[1]);
destroy_reg_param(&reg_params[0]);
return retval;
}
static int fespi_write(struct flash_bank *bank, const uint8_t *buffer,
uint32_t offset, uint32_t count)
{
struct target *target = bank->target;
struct fespi_flash_bank *fespi_info = bank->driver_priv;
uint32_t cur_count, page_size, page_offset;
int retval = ERROR_OK;
LOG_DEBUG("%s: offset=0x%08" PRIx32 " count=0x%08" PRIx32,
__func__, offset, count);
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (offset + count > fespi_info->dev->size_in_bytes) {
LOG_WARNING("Write past end of flash. Extra data discarded.");
count = fespi_info->dev->size_in_bytes - offset;
}
/* Check sector protection */
for (unsigned int sector = 0; sector < bank->num_sectors; sector++) {
/* Start offset in or before this sector? */
/* End offset in or behind this sector? */
if ((offset <
(bank->sectors[sector].offset + bank->sectors[sector].size))
&& ((offset + count - 1) >= bank->sectors[sector].offset)
&& bank->sectors[sector].is_protected) {
LOG_ERROR("Flash sector %u protected", sector);
return ERROR_FAIL;
}
}
struct working_area *algorithm_wa;
if (target_alloc_working_area(target, sizeof(algorithm_bin),
&algorithm_wa) != ERROR_OK) {
LOG_WARNING("Couldn't allocate %zd-byte working area.",
sizeof(algorithm_bin));
algorithm_wa = NULL;
} else {
retval = target_write_buffer(target, algorithm_wa->address,
sizeof(algorithm_bin), algorithm_bin);
if (retval != ERROR_OK) {
LOG_ERROR("Failed to write code to " TARGET_ADDR_FMT ": %d",
algorithm_wa->address, retval);
target_free_working_area(target, algorithm_wa);
algorithm_wa = NULL;
}
}
struct working_area *data_wa = NULL;
unsigned data_wa_size = 2 * count;
while (1) {
if (data_wa_size < 128) {
LOG_WARNING("Couldn't allocate data working area.");
target_free_working_area(target, algorithm_wa);
algorithm_wa = NULL;
}
if (target_alloc_working_area_try(target, data_wa_size, &data_wa) ==
ERROR_OK) {
break;
}
data_wa_size /= 2;
}
/* If no valid page_size, use reasonable default. */
page_size = fespi_info->dev->pagesize ?
fespi_info->dev->pagesize : SPIFLASH_DEF_PAGESIZE;
fespi_txwm_wait(bank);
/* Disable Hardware accesses*/
if (fespi_disable_hw_mode(bank) != ERROR_OK)
return ERROR_FAIL;
struct algorithm_steps *as = as_new();
/* poll WIP */
retval = fespi_wip(bank, FESPI_PROBE_TIMEOUT);
if (retval != ERROR_OK)
goto err;
page_offset = offset % page_size;
/* central part, aligned words */
while (count > 0) {
/* clip block at page boundary */
if (page_offset + count > page_size)
cur_count = page_size - page_offset;
else
cur_count = count;
if (algorithm_wa)
retval = steps_add_buffer_write(as, buffer, offset, cur_count);
else
retval = slow_fespi_write_buffer(bank, buffer, offset, cur_count);
if (retval != ERROR_OK)
goto err;
page_offset = 0;
buffer += cur_count;
offset += cur_count;
count -= cur_count;
}
if (algorithm_wa)
retval = steps_execute(as, bank, algorithm_wa, data_wa);
err:
if (algorithm_wa) {
target_free_working_area(target, data_wa);
target_free_working_area(target, algorithm_wa);
}
as_delete(as);
/* Switch to HW mode before return to prompt */
if (fespi_enable_hw_mode(bank) != ERROR_OK)
return ERROR_FAIL;
return retval;
}
/* Return ID of flash device */
/* On exit, SW mode is kept */
static int fespi_read_flash_id(struct flash_bank *bank, uint32_t *id)
{
struct target *target = bank->target;
int retval;
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
fespi_txwm_wait(bank);
/* poll WIP */
retval = fespi_wip(bank, FESPI_PROBE_TIMEOUT);
if (retval != ERROR_OK)
return retval;
fespi_set_dir(bank, FESPI_DIR_RX);
/* Send SPI command "read ID" */
if (fespi_write_reg(bank, FESPI_REG_CSMODE, FESPI_CSMODE_HOLD) != ERROR_OK)
return ERROR_FAIL;
fespi_tx(bank, SPIFLASH_READ_ID);
/* Send dummy bytes to actually read the ID.*/
fespi_tx(bank, 0);
fespi_tx(bank, 0);
fespi_tx(bank, 0);
/* read ID from Receive Register */
*id = 0;
if (fespi_rx(bank, NULL) != ERROR_OK)
return ERROR_FAIL;
uint8_t rx;
if (fespi_rx(bank, &rx) != ERROR_OK)
return ERROR_FAIL;
*id = rx;
if (fespi_rx(bank, &rx) != ERROR_OK)
return ERROR_FAIL;
*id |= (rx << 8);
if (fespi_rx(bank, &rx) != ERROR_OK)
return ERROR_FAIL;
*id |= (rx << 16);
if (fespi_write_reg(bank, FESPI_REG_CSMODE, FESPI_CSMODE_AUTO) != ERROR_OK)
return ERROR_FAIL;
fespi_set_dir(bank, FESPI_DIR_TX);
return ERROR_OK;
}
static int fespi_probe(struct flash_bank *bank)
{
struct target *target = bank->target;
struct fespi_flash_bank *fespi_info = bank->driver_priv;
struct flash_sector *sectors;
uint32_t id = 0; /* silence uninitialized warning */
const struct fespi_target *target_device;
int retval;
uint32_t sectorsize;
if (fespi_info->probed)
free(bank->sectors);
fespi_info->probed = 0;
if (fespi_info->ctrl_base == 0) {
for (target_device = target_devices ; target_device->name ; ++target_device)
if (target_device->tap_idcode == target->tap->idcode)
break;
if (!target_device->name) {
LOG_ERROR("Device ID 0x%" PRIx32 " is not known as FESPI capable",
target->tap->idcode);
return ERROR_FAIL;
}
fespi_info->ctrl_base = target_device->ctrl_base;
LOG_DEBUG("Valid FESPI on device %s at address " TARGET_ADDR_FMT,
target_device->name, bank->base);
} else {
LOG_DEBUG("Assuming FESPI as specified at address " TARGET_ADDR_FMT
" with ctrl at " TARGET_ADDR_FMT, fespi_info->ctrl_base,
bank->base);
}
/* read and decode flash ID; returns in SW mode */
if (fespi_write_reg(bank, FESPI_REG_TXCTRL, FESPI_TXWM(1)) != ERROR_OK)
return ERROR_FAIL;
fespi_set_dir(bank, FESPI_DIR_TX);
/* Disable Hardware accesses*/
if (fespi_disable_hw_mode(bank) != ERROR_OK)
return ERROR_FAIL;
retval = fespi_read_flash_id(bank, &id);
if (fespi_enable_hw_mode(bank) != ERROR_OK)
return ERROR_FAIL;
if (retval != ERROR_OK)
return retval;
fespi_info->dev = NULL;
for (const struct flash_device *p = flash_devices; p->name ; p++)
if (p->device_id == id) {
fespi_info->dev = p;
break;
}
if (!fespi_info->dev) {
LOG_ERROR("Unknown flash device (ID 0x%08" PRIx32 ")", id);
return ERROR_FAIL;
}
LOG_INFO("Found flash device \'%s\' (ID 0x%08" PRIx32 ")",
fespi_info->dev->name, fespi_info->dev->device_id);
/* Set correct size value */
bank->size = fespi_info->dev->size_in_bytes;
if (bank->size <= (1UL << 16))
LOG_WARNING("device needs 2-byte addresses - not implemented");
if (bank->size > (1UL << 24))
LOG_WARNING("device needs paging or 4-byte addresses - not implemented");
/* if no sectors, treat whole bank as single sector */
sectorsize = fespi_info->dev->sectorsize ?
fespi_info->dev->sectorsize : fespi_info->dev->size_in_bytes;
/* create and fill sectors array */
bank->num_sectors = fespi_info->dev->size_in_bytes / sectorsize;
sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
if (sectors == NULL) {
LOG_ERROR("not enough memory");
return ERROR_FAIL;
}
for (unsigned int sector = 0; sector < bank->num_sectors; sector++) {
sectors[sector].offset = sector * sectorsize;
sectors[sector].size = sectorsize;
sectors[sector].is_erased = -1;
sectors[sector].is_protected = 0;
}
bank->sectors = sectors;
fespi_info->probed = 1;
return ERROR_OK;
}
static int fespi_auto_probe(struct flash_bank *bank)
{
struct fespi_flash_bank *fespi_info = bank->driver_priv;
if (fespi_info->probed)
return ERROR_OK;
return fespi_probe(bank);
}
static int fespi_protect_check(struct flash_bank *bank)
{
/* Nothing to do. Protection is only handled in SW. */
return ERROR_OK;
}
static int get_fespi_info(struct flash_bank *bank, char *buf, int buf_size)
{
struct fespi_flash_bank *fespi_info = bank->driver_priv;
if (!(fespi_info->probed)) {
snprintf(buf, buf_size,
"\nFESPI flash bank not probed yet\n");
return ERROR_OK;
}
snprintf(buf, buf_size, "\nFESPI flash information:\n"
" Device \'%s\' (ID 0x%08" PRIx32 ")\n",
fespi_info->dev->name, fespi_info->dev->device_id);
return ERROR_OK;
}
const struct flash_driver fespi_flash = {
.name = "fespi",
.flash_bank_command = fespi_flash_bank_command,
.erase = fespi_erase,
.protect = fespi_protect,
.write = fespi_write,
.read = default_flash_read,
.probe = fespi_probe,
.auto_probe = fespi_auto_probe,
.erase_check = default_flash_blank_check,
.protect_check = fespi_protect_check,
.info = get_fespi_info,
.free_driver_priv = default_flash_free_driver_priv
};
Reference in New Issue View Git Blame Copy Permalink