32 lines
1.2 KiB
INI
32 lines
1.2 KiB
INI
#
|
|
# Analog Devices ADSP-SC584-EZBRD evaluation board
|
|
#
|
|
# Evaluation boards by Analog Devices (and designs derived from them) use a
|
|
# non-standard 10-pin 0.05" ARM Cortex Debug Connector. In this bastardized
|
|
# implementation, pin 9 (GND or GNDDetect) has been usurped with JTAG /TRST.
|
|
#
|
|
# As a result, a standards-compliant debug pod will force /TRST active,
|
|
# putting the processor's debug interface into reset and preventing usage.
|
|
#
|
|
# A connector adapter must be employed on these boards to isolate or remap
|
|
# /TRST so that it is only asserted when intended.
|
|
|
|
# Analog expects users to use their proprietary ICE-1000 / ICE-2000 with all
|
|
# ADSP-SC58x designs, but this is an ARM target (and subject to the
|
|
# qualifications above) many ARM debug pods should be compatible.
|
|
|
|
#source [find interface/cmsis-dap.cfg]
|
|
source [find interface/jlink.cfg]
|
|
|
|
# Analog's silicon supports SWD and JTAG, but their proprietary ICE is limited
|
|
# to JTAG. (This is presumably why their connector pinout was modified.)
|
|
# SWD is chosen here, as it is more efficient and doesn't require /TRST.
|
|
|
|
transport select swd
|
|
|
|
# chosen speed is 'safe' choice, but your adapter may be capable of more
|
|
adapter speed 400
|
|
|
|
source [find target/adsp-sc58x.cfg]
|
|
|