riscv-openocd/testing/build.test2/Makefile

194 lines
4.1 KiB
Makefile

# -*- mode: makefile -*-
#========================================
# DO NOT DELETE THE LINE BELOW
_default: default
# DO NOT DELETE THE LINE_ABOVE
#========================================
#========================================
#
# There are no user configurable options here.
#
# All user configurable options are in local.uses
#
include ./local.uses
#
#========================================
#========================================
# This is the USB driver for the FTDI2XX chips.
# It is a "closed" solution from FTDICHIP.COM
# Some claim it is faster then the open/free
# solution: win32-libusb+libftdi.
#
ftd2xx.download:
mkdir -p ${VIRGINS}
wget -O ${FTD2XX_ZIPFILE_LOCAL} \
${FTD2XX_ZIPFILE_URL}
ftd2xx.unpack:
rm -rf ${FTD2XX_WIN32_DIR}
mkdir -p ${FTD2XX_WIN32_DIR}
cd ${FTD2XX_WIN32_DIR} && unzip \
${FTD2XX_ZIPFILE_LOCAL}
ftd2xx.build:
@echo "Nothing to do for: $@"
ftd2xx.configure:
@echo "Nothing to do for: $@"
ftd2xx.install:
@echo "Nothing to do for: $@"
clean::
rm -rf ${FTD2XX_WIN32_DIR}
ftd2xx.all: ftd2xx.unpack ftd2xx.configure \
ftd2xx.build ftd2xx.install
#========================================-
# LIBFTDI - requires LIBCONFUSE..
# So we handle it here :-(
libconfuse.download:
mkdir -p virgins
wget -O ${LIBCONFUSE_TARFILE_LOCAL} \
${LIBCONFUSE_TARFILE_URL}
libconfuse.unpack:
tar xfz ${LIBCONFUSE_TARFILE_LOCAL}
clean::
rm -rf ${LIBCONFUSE_SRC_DIR}
libconfuse.configure:
rm -rf ${LIBCONFUSE_BUILD_DIR}
mkdir -p ${LIBCONFUSE_BUILD_DIR}
cd ${LIBCONFUSE_BUILD_DIR} && \
${LIBCONFUSE_SRC_DIR}/configure \
--prefix=${PREFIX}
clean::
rm -rf ${LIBCONFUSE_BUILD_DIR}
libconfuse.build:
cd ${LIBCONFUSE_BUILD_DIR} && ${MAKE}
libconfuse.install:
cd ${LIBCONFUSE_BUILD_DIR} && ${MAKE} install
libconfuse.all: libconfuse.unpack libconfuse.configure \
libconfuse.build libconfuse.install
#========================================
# LIBFTDI - the open source (and free)
# alternative to (closed) FTD2XX drivers.
libftdi.download:
mkdir -p virgins
wget -O ${LIBFTDI_TARFILE_LOCAL} \
${LIBFTDI_TARFILE_URL}
libftdi.unpack:
tar xfz ${LIBFTDI_TARFILE_LOCAL}
clean::
rm -rf ${LIBFTDI_SRC_DIR}
libftdi.configure:
rm -rf ${LIBFTDI_BUILD_DIR}
mkdir -p ${LIBFTDI_BUILD_DIR}
cd ${LIBFTDI_BUILD_DIR} && \
${LIBFTDI_SRC_DIR}/configure \
--prefix=${PREFIX}
clean::
rm -rf ${LIBFTDI_BUILD_DIR}
libftdi.build:
cd ${LIBFTDI_BUILD_DIR} && ${MAKE}
libftdi.install:
cd ${LIBFTDI_BUILD_DIR} && ${MAKE} install
libftdi.all: libftdi.unpack libftdi.configure \
libftdi.build libftdi.install
#========================================
# Openocd...
openocd.bootstrap:
cd ${OPENOCD_SRC_DIR} && bash ./bootstrap
openocd.configure:
rm -rf ${OPENOCD_BUILD_DIR}
mkdir -p ${OPENOCD_BUILD_DIR}
cd ${OPENOCD_BUILD_DIR} && ${OPENOCD_SRC_DIR}/configure \
--prefix=${INSTALL_DIR} \
${OPENOCD_CONFIG_OPTIONS}
openocd.build:
cd ${OPENOCD_BUILD_DIR} && ${MAKE}
openocd.docs:
cd ${OPENOCD_BUILD_DIR}/docs && ${MAKE}
openocd.docs.pdf:
cd ${OPENOCD_BUILD_DIR}/docs && ${MAKE} pdf
openocd.docs.html:
cd ${OPENOCD_BUILD_DIR}/docs && ${MAKE} html
# fixme:
# need to add a "make one huge html file target"
openocd.install:
cd ${OPENOCD_BUILD_DIR} && ${MAKE} install
#========================================
# The world...
# Manual step.
download.all: \
ftd2xx.download \
libconfuse.download \
libftdi.download
ifeq (x"${FT2232_DRIVER}",x"ftd2xx")
prebuild: ftd2xx.all
endif
ifeq (x"${FT2232_DRIVER}",x"libftdi")
prebuild: libconfuse.all libftdi.all
endif
remake: \
openocd.bootstrap \
openocd.configure \
openocd.build \
openocd.install
initial.build : download.all prebuild remake
all:
@echo ""
@echo " This makefile does not support an 'all' target"
@echo ""
@echo " If this is your *FIRST* time building... "
@echo " Then use this command: \"make initial.build\""
@echo ""
@echo " The \"default\" target is for openocd developers"
@echo " and rebuilds openocd completely.."
@echo ""
default:
test -d ${OPENOCD_SRC_DIR} || (echo "Where is: The OPENOCD source?"; exit 1)
${MAKE} remake
whatis_%:
@echo ""
@echo "Makevariable: $* => ${${*}}"
@echo ""