riscv-openocd/tcl
Uwe Hermann d4599b8b3f Add a board file for the Glyn Tonga2.
This is a Toshiba TMPA900CMXBG (ARM9) based SO-DIMM CPU module with 64MB
DDR SDRAM, 256MB NAND flash, and on-board Ethernet.

The board file provides a tonga2_init function which sets up the
PLL/clocks and memory (SDRAM and SRAM), which allows writing a boot-loader
into RAM via JTAG.

Change-Id: I60522b97997bdf50e1f25aebab910d93a98522fb
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/19
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-13 22:28:16 +00:00
..
board Add a board file for the Glyn Tonga2. 2011-10-13 22:28:16 +00:00
chip at91: add at91sam9263 chip register definition 2011-04-09 19:19:36 +02:00
cpld Xilinx xcr3256.cfg basic config script 2009-10-12 15:12:35 +02:00
cpu/arm Move TCL script files -- Step 2 of 2: 2009-05-27 06:49:24 +00:00
interface Fix redbee config files 2011-08-24 11:13:26 +02:00
target STM32L: Added flash driver and target 2011-10-03 18:42:39 +02:00
test TCL scripts: replace "puts" with "echo" 2010-11-09 08:12:51 +01:00
bitsbytes.tcl TCL scripts: replace "puts" with "echo" 2010-11-09 08:12:51 +01:00
mem_helper.tcl TCL scripts: fix ocd_mem2array/mem2array 2010-09-28 10:44:50 +02:00
memory.tcl tcl: remove silly ocd_ prefix to array2mem and mem2array 2010-08-11 17:24:55 +02:00
mmr_helpers.tcl TCL scripts: replace "puts" with "echo" 2010-11-09 08:12:51 +01:00