interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/interface
History
Diego Herranz 5a6f0495db tcl/interface/ftdi: improve minimodule config 
- Tested on a real FT2232H MiniModule, so warning removed.
- Every pin initially set to high impedance except TCK, TDI,
  TDO and TMS: Safest values given it's an evaluation board
  and the rest of pins might be connected to something else.
- Reset is now initially de-asserted (it was asserted
  which is not recommended).
- nRST pin choice is arbitrary so comment added (wondering
  if it should be an "echo").
- "-oe" option added to NRST signal so it can be set as
  high impedance (tri-stated).

Change-Id: I967ab0c7bbccf72dbf6d6d78b3180b74e016e0d6
Signed-off-by: Diego Herranz <diegoherranz@diegoherranz.com>
Reviewed-on: http://openocd.zylin.com/4185
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
 		2017-10-03 11:22:56 +01:00
..
ftdi tcl/interface/ftdi: improve minimodule config 2017-10-03 11:22:56 +01:00
altera-usb-blaster.cfg jtag_interface: .speed can be NULL when not needed 2013-02-08 22:33:19 +00:00
altera-usb-blaster2.cfg jtag/drivers: add USB-Blaster II 2014-01-20 13:28:02 +00:00
arm-jtag-ew.cfg Move TCL script files -- Step 2 of 2: 2009-05-27 06:49:24 +00:00
at91rm9200.cfg Move TCL script files -- Step 2 of 2: 2009-05-27 06:49:24 +00:00
buspirate.cfg TCL: fix non TCL comments 2010-12-18 21:04:22 +01:00
calao-usb-a9260.cfg rename jtag_nsrst_delay as adapter_nsrst_delay 2010-03-15 08:41:30 -07:00
chameleon.cfg Move TCL script files -- Step 2 of 2: 2009-05-27 06:49:24 +00:00
cmsis-dap.cfg cmsis-dap: add serial number support 2014-10-16 12:30:50 +00:00
dummy.cfg Move TCL script files -- Step 2 of 2: 2009-05-27 06:49:24 +00:00
estick.cfg jtag: add opendous and estick support 2012-05-14 09:41:49 +00:00
flashlink.cfg interface configs: Fix whitespace and other issues. 2011-10-30 02:06:07 +00:00
imx-native.cfg imx_gpio: add mmap based jtag interface for IMX processors 2017-05-31 08:16:17 +01:00
jlink.cfg interface/jlink: Fix comment about serial number 2016-04-12 17:03:02 +01:00
jtag_vpi.cfg jtag_vpi: make the server address configurable 2013-12-31 12:00:49 +00:00
kitprog.cfg jtag/drivers: Add Cypress KitProg driver 2017-05-12 10:08:43 +01:00
nds32-aice.cfg aice: add Andes AICE support 2013-06-05 19:27:23 +00:00
opendous.cfg jtag: add opendous and estick support 2012-05-14 09:41:49 +00:00
openjtag.cfg Added OpenJTAG Driver 2013-06-05 19:52:15 +00:00
osbdm.cfg jtag_interface: .speed can be NULL when not needed 2013-02-08 22:33:19 +00:00
parport.cfg tcl/interface/parport: default to sane value on non-windows systems 2015-04-14 11:42:32 +01:00
parport_dlc5.cfg interface configs: Fix whitespace and other issues. 2011-10-30 02:06:07 +00:00
raspberrypi-native.cfg bcm2835gpio: Add SWD support, Raspberry Pi 2 support. 2015-08-06 13:16:02 +01:00
raspberrypi2-native.cfg bcm2835gpio: Add SWD support, Raspberry Pi 2 support. 2015-08-06 13:16:02 +01:00
rlink.cfg Move TCL script files -- Step 2 of 2: 2009-05-27 06:49:24 +00:00
stlink-v1.cfg jtag_interface: .speed can be NULL when not needed 2013-02-08 22:33:19 +00:00
stlink-v2-1.cfg Support hla_serial command for ST-LINK adapters. 2014-09-22 19:36:05 +00:00
stlink-v2.cfg Support hla_serial command for ST-LINK adapters. 2014-09-22 19:36:05 +00:00
sysfsgpio-raspberrypi.cfg jtag_interface: .speed can be NULL when not needed 2013-02-08 22:33:19 +00:00
ti-icdi.cfg jtag_interface: .speed can be NULL when not needed 2013-02-08 22:33:19 +00:00
ulink.cfg interface configs: Add missing URLs and names. 2011-11-03 23:53:26 +00:00
usb-jtag.cfg Remove support for the GPL incompatible FTDI D2XX library 2016-11-06 09:47:12 +00:00
usbprog.cfg interface configs: Fix whitespace and other issues. 2011-10-30 02:06:07 +00:00
vsllink.cfg versaloon driver update 2011-08-16 12:50:38 +01:00