eb6f2745b7
Driver for DesignWare SPI controller, found on many SoCs (see compatible list in Linux device tree bindings Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml). This implementation only supports MIPS as it was the only one available for the tests, however, adding support for other architectures should require only few adjustments. Driver relies on flash/nor/spi.h to find Flash chip info. Driver internal functions support 24bit addressing mode, but due to limitations of flash/nor/spi.h, it is not used. The reported writing speed is about 60kb/s. Lint, sanitizer and valgrind reported warnings were not related to the driver. Change-Id: Id3df5626ab88055f034f74f274823051dedefeb1 Signed-off-by: Sergey Matsievskiy <matsievskiysv@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/8400 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> |
||
|---|---|---|
| .. | ||
| manual | ||
| usb_adapters | ||
| .gitattributes | ||
| Makefile.am | ||
| checkpatch.rst | ||
| fdl.texi | ||
| openocd.1 | ||
| openocd.texi | ||