d631b2e5ac
An issue has been seen with the stm32lx flash driver that if a power cycle/reset is applied after a erase, any ram loader will Hard Fault on execution. A similar issue is mentioned in the errata for the device. Two solution's seem to workaround this issue: 1, Handle the exception, this means adding exception vectors to the loader and changing the exception address using nvic vtor register. 2. falling back to using slower direct page writes - approx 50% slower. Using solution 1 would mean restrictions are placed on the loader location. Solution 2 was chosen mainly as it was simpler too implement. Change-Id: I429f06b5a3e3b1d8de90071a88a7df11fc9b46a7 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1010 Tested-by: jenkins |
||
|---|---|---|
| .. | ||
| nand | ||
| nor | ||
| ocl/at91sam7x | ||
| Makefile.am | ||
| common.c | ||
| common.h | ||
| mflash.c | ||
| mflash.h | ||
| startup.tcl | ||