Ulf Wetzker 8d70c86200 flash/nor/at91sam3: fixed lock region size ... According to the "AT91SAM ARM-based Flash MCU SAM3S Series datasheet" (http://www.atmel.com/Images/doc11090s.pdf) p. 30 the lock region size for the at91sam3sd9 family is 32 kbyte. This fix is only based on the datasheet due to missing hardware. Change-Id: Ic47b0642e4f11a60de477eaa0167038103b8ff15 Signed-off-by: Ulf Wetzker <ulf.wetzker@eas.iis.fraunhofer.de> Reviewed-on: http://openocd.zylin.com/1422 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>		2013-07-01 08:40:12 +00:00
..
flash	flash/nor/at91sam3: fixed lock region size	2013-07-01 08:40:12 +00:00
helper	Add support for 64 bit parameter to irscan	2013-07-01 08:37:14 +00:00
jtag	Allow autoscan up to 64 bit IR lengths	2013-07-01 08:37:27 +00:00
pld	update files to correct FSF address	2013-06-05 19:52:42 +00:00
rtos	keep gdb aware of threads if RTOS is set but no threads are created	2013-07-01 08:38:32 +00:00
server	update files to correct FSF address	2013-06-05 19:52:42 +00:00
svf	update files to correct FSF address	2013-06-05 19:52:42 +00:00
target	armv4_5: prevent segfault when gdb connects to an underinitialised target	2013-07-01 08:39:00 +00:00
transport	update files to correct FSF address	2013-06-05 19:52:42 +00:00
xsvf	update files to correct FSF address	2013-06-05 19:52:42 +00:00
Makefile.am	drivers/jtag: rewrite usb_blaster driver	2013-06-04 20:00:42 +00:00
hello.c	update files to correct FSF address	2013-06-05 19:52:42 +00:00
hello.h	update files to correct FSF address	2013-06-05 19:52:42 +00:00
main.c	update files to correct FSF address	2013-06-05 19:52:42 +00:00
openocd.c	update files to correct FSF address	2013-06-05 19:52:42 +00:00
openocd.h	update files to correct FSF address	2013-06-05 19:52:42 +00:00