Paul Fertser da434d7d59 jtag: drivers: bcm2835gpio: don't allow GPIOs > 31 ... Current code assumes all the GPIO signals are manipulated via a single 32-bit register so using higher GPIOs silently fails. Fix the check instead of trying to handle additional GPIOs (available on Raspberry Pi Compute Modules) as that would slow the driver down. Change-Id: Ib3b5864afb3b972d952f9b74665201cd93924959 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6658 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>		2021-11-05 22:44:47 +00:00
..
manual	openocd: fix some minor typo	2021-05-22 10:06:51 +01:00
.gitattributes	doc: fix texinfo files attributes on Windows	2020-03-24 17:20:19 +00:00
Makefile.am	Convert to non-recursive make	2016-12-08 16:23:10 +00:00
fdl.texi	LICENSES: add the GFDL-1.2 license	2021-04-11 20:52:14 +01:00
openocd.1	docs: update incorrect urls	2013-03-28 23:24:40 +00:00
openocd.texi	jtag: drivers: bcm2835gpio: don't allow GPIOs > 31	2021-11-05 22:44:47 +00:00