1475 lines
42 KiB
C
1475 lines
42 KiB
C
/***************************************************************************
|
|
* Copyright (C) 2006 by Magnus Lundin *
|
|
* lundin@mlu.mine.nu *
|
|
* *
|
|
* Copyright (C) 2008 by Spencer Oliver *
|
|
* spen@spen-soft.co.uk *
|
|
* *
|
|
* Copyright (C) 2009 by Oyvind Harboe *
|
|
* oyvind.harboe@zylin.com *
|
|
* *
|
|
* This program is free software; you can redistribute it and/or modify *
|
|
* it under the terms of the GNU General Public License as published by *
|
|
* the Free Software Foundation; either version 2 of the License, or *
|
|
* (at your option) any later version. *
|
|
* *
|
|
* This program is distributed in the hope that it will be useful, *
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
|
|
* GNU General Public License for more details. *
|
|
* *
|
|
* You should have received a copy of the GNU General Public License *
|
|
* along with this program; if not, write to the *
|
|
* Free Software Foundation, Inc., *
|
|
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
|
|
***************************************************************************/
|
|
/***************************************************************************
|
|
* *
|
|
* This file implements support for the ARM Debug Interface v5 (ADI_V5) *
|
|
* *
|
|
* ARM(tm) Debug Interface v5 Architecture Specification ARM IHI 0031A *
|
|
* *
|
|
* CoreSight(tm) DAP-Lite TRM, ARM DDI 0316D *
|
|
* Cortex-M3(tm) TRM, ARM DDI 0337G *
|
|
* *
|
|
***************************************************************************/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include "config.h"
|
|
#endif
|
|
|
|
#include "arm_adi_v5.h"
|
|
#include <helper/time_support.h>
|
|
|
|
/*
|
|
* Transaction Mode:
|
|
* swjdp->trans_mode = TRANS_MODE_COMPOSITE;
|
|
* Uses Overrun checking mode and does not do actual JTAG send/receive or transaction
|
|
* result checking until swjdp_end_transaction()
|
|
* This must be done before using or deallocating any return variables.
|
|
* swjdp->trans_mode == TRANS_MODE_ATOMIC
|
|
* All reads and writes to the AHB bus are checked for valid completion, and return values
|
|
* are immediatley available.
|
|
*/
|
|
|
|
|
|
/* ARM ADI Specification requires at least 10 bits used for TAR autoincrement */
|
|
|
|
/*
|
|
uint32_t tar_block_size(uint32_t address)
|
|
Return the largest block starting at address that does not cross a tar block size alignment boundary
|
|
*/
|
|
static uint32_t max_tar_block_size(uint32_t tar_autoincr_block, uint32_t address)
|
|
{
|
|
return (tar_autoincr_block - ((tar_autoincr_block - 1) & address)) >> 2;
|
|
}
|
|
|
|
/***************************************************************************
|
|
* *
|
|
* DPACC and APACC scanchain access through JTAG-DP *
|
|
* *
|
|
***************************************************************************/
|
|
|
|
/* Scan out and in from target ordered uint8_t buffers */
|
|
int adi_jtag_dp_scan(struct swjdp_common *swjdp, uint8_t instr, uint8_t reg_addr, uint8_t RnW, uint8_t *outvalue, uint8_t *invalue, uint8_t *ack)
|
|
{
|
|
struct arm_jtag *jtag_info = swjdp->jtag_info;
|
|
struct scan_field fields[2];
|
|
uint8_t out_addr_buf;
|
|
|
|
jtag_set_end_state(TAP_IDLE);
|
|
arm_jtag_set_instr(jtag_info, instr, NULL);
|
|
|
|
/* Add specified number of tck clocks before accessing memory bus */
|
|
if ((instr == DAP_IR_APACC) && ((reg_addr == AP_REG_DRW)||((reg_addr&0xF0) == AP_REG_BD0))&& (swjdp->memaccess_tck != 0))
|
|
jtag_add_runtest(swjdp->memaccess_tck, jtag_set_end_state(TAP_IDLE));
|
|
|
|
fields[0].tap = jtag_info->tap;
|
|
fields[0].num_bits = 3;
|
|
buf_set_u32(&out_addr_buf, 0, 3, ((reg_addr >> 1) & 0x6) | (RnW & 0x1));
|
|
fields[0].out_value = &out_addr_buf;
|
|
fields[0].in_value = ack;
|
|
|
|
fields[1].tap = jtag_info->tap;
|
|
fields[1].num_bits = 32;
|
|
fields[1].out_value = outvalue;
|
|
fields[1].in_value = invalue;
|
|
|
|
jtag_add_dr_scan(2, fields, jtag_get_end_state());
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
/* Scan out and in from host ordered uint32_t variables */
|
|
int adi_jtag_dp_scan_u32(struct swjdp_common *swjdp, uint8_t instr, uint8_t reg_addr, uint8_t RnW, uint32_t outvalue, uint32_t *invalue, uint8_t *ack)
|
|
{
|
|
struct arm_jtag *jtag_info = swjdp->jtag_info;
|
|
struct scan_field fields[2];
|
|
uint8_t out_value_buf[4];
|
|
uint8_t out_addr_buf;
|
|
|
|
jtag_set_end_state(TAP_IDLE);
|
|
arm_jtag_set_instr(jtag_info, instr, NULL);
|
|
|
|
/* Add specified number of tck clocks before accessing memory bus */
|
|
if ((instr == DAP_IR_APACC) && ((reg_addr == AP_REG_DRW)||((reg_addr&0xF0) == AP_REG_BD0))&& (swjdp->memaccess_tck != 0))
|
|
jtag_add_runtest(swjdp->memaccess_tck, jtag_set_end_state(TAP_IDLE));
|
|
|
|
fields[0].tap = jtag_info->tap;
|
|
fields[0].num_bits = 3;
|
|
buf_set_u32(&out_addr_buf, 0, 3, ((reg_addr >> 1) & 0x6) | (RnW & 0x1));
|
|
fields[0].out_value = &out_addr_buf;
|
|
fields[0].in_value = ack;
|
|
|
|
fields[1].tap = jtag_info->tap;
|
|
fields[1].num_bits = 32;
|
|
buf_set_u32(out_value_buf, 0, 32, outvalue);
|
|
fields[1].out_value = out_value_buf;
|
|
fields[1].in_value = NULL;
|
|
|
|
if (invalue)
|
|
{
|
|
fields[1].in_value = (uint8_t *)invalue;
|
|
jtag_add_dr_scan(2, fields, jtag_get_end_state());
|
|
|
|
jtag_add_callback(arm_le_to_h_u32, (jtag_callback_data_t) invalue);
|
|
} else
|
|
{
|
|
|
|
jtag_add_dr_scan(2, fields, jtag_get_end_state());
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
/* scan_inout_check adds one extra inscan for DPAP_READ commands to read variables */
|
|
int scan_inout_check(struct swjdp_common *swjdp, uint8_t instr, uint8_t reg_addr, uint8_t RnW, uint8_t *outvalue, uint8_t *invalue)
|
|
{
|
|
adi_jtag_dp_scan(swjdp, instr, reg_addr, RnW, outvalue, NULL, NULL);
|
|
|
|
if ((RnW == DPAP_READ) && (invalue != NULL))
|
|
{
|
|
adi_jtag_dp_scan(swjdp, DAP_IR_DPACC, DP_RDBUFF, DPAP_READ, 0, invalue, &swjdp->ack);
|
|
}
|
|
|
|
/* In TRANS_MODE_ATOMIC all DAP_IR_APACC transactions wait for ack = OK/FAULT and the check CTRL_STAT */
|
|
if ((instr == DAP_IR_APACC) && (swjdp->trans_mode == TRANS_MODE_ATOMIC))
|
|
{
|
|
return swjdp_transaction_endcheck(swjdp);
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
int scan_inout_check_u32(struct swjdp_common *swjdp, uint8_t instr, uint8_t reg_addr, uint8_t RnW, uint32_t outvalue, uint32_t *invalue)
|
|
{
|
|
adi_jtag_dp_scan_u32(swjdp, instr, reg_addr, RnW, outvalue, NULL, NULL);
|
|
|
|
if ((RnW == DPAP_READ) && (invalue != NULL))
|
|
{
|
|
adi_jtag_dp_scan_u32(swjdp, DAP_IR_DPACC, DP_RDBUFF, DPAP_READ, 0, invalue, &swjdp->ack);
|
|
}
|
|
|
|
/* In TRANS_MODE_ATOMIC all DAP_IR_APACC transactions wait for ack = OK/FAULT and then check CTRL_STAT */
|
|
if ((instr == DAP_IR_APACC) && (swjdp->trans_mode == TRANS_MODE_ATOMIC))
|
|
{
|
|
return swjdp_transaction_endcheck(swjdp);
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
int swjdp_transaction_endcheck(struct swjdp_common *swjdp)
|
|
{
|
|
int retval;
|
|
uint32_t ctrlstat;
|
|
|
|
/* too expensive to call keep_alive() here */
|
|
|
|
#if 0
|
|
/* Danger!!!! BROKEN!!!! */
|
|
scan_inout_check_u32(swjdp, DAP_IR_DPACC, DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
|
|
/* Danger!!!! BROKEN!!!! Why will jtag_execute_queue() fail here????
|
|
R956 introduced the check on return value here and now Michael Schwingen reports
|
|
that this code no longer works....
|
|
|
|
https://lists.berlios.de/pipermail/openocd-development/2008-September/003107.html
|
|
*/
|
|
if ((retval = jtag_execute_queue()) != ERROR_OK)
|
|
{
|
|
LOG_ERROR("BUG: Why does this fail the first time????");
|
|
}
|
|
/* Why??? second time it works??? */
|
|
#endif
|
|
|
|
scan_inout_check_u32(swjdp, DAP_IR_DPACC, DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
|
|
if ((retval = jtag_execute_queue()) != ERROR_OK)
|
|
return retval;
|
|
|
|
swjdp->ack = swjdp->ack & 0x7;
|
|
|
|
if (swjdp->ack != 2)
|
|
{
|
|
long long then = timeval_ms();
|
|
while (swjdp->ack != 2)
|
|
{
|
|
if (swjdp->ack == 1)
|
|
{
|
|
if ((timeval_ms()-then) > 1000)
|
|
{
|
|
LOG_WARNING("Timeout (1000ms) waiting for ACK = OK/FAULT in SWJDP transaction");
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
LOG_WARNING("Invalid ACK in SWJDP transaction");
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
scan_inout_check_u32(swjdp, DAP_IR_DPACC, DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
|
|
if ((retval = jtag_execute_queue()) != ERROR_OK)
|
|
return retval;
|
|
swjdp->ack = swjdp->ack & 0x7;
|
|
}
|
|
} else
|
|
{
|
|
/* common code path avoids fn to timeval_ms() */
|
|
}
|
|
|
|
/* Check for STICKYERR and STICKYORUN */
|
|
if (ctrlstat & (SSTICKYORUN | SSTICKYERR))
|
|
{
|
|
LOG_DEBUG("swjdp: CTRL/STAT error 0x%" PRIx32 "", ctrlstat);
|
|
/* Check power to debug regions */
|
|
if ((ctrlstat & 0xf0000000) != 0xf0000000)
|
|
{
|
|
ahbap_debugport_init(swjdp);
|
|
}
|
|
else
|
|
{
|
|
uint32_t mem_ap_csw, mem_ap_tar;
|
|
|
|
/* Print information about last AHBAP access */
|
|
LOG_ERROR("AHBAP Cached values: dp_select 0x%" PRIx32 ", ap_csw 0x%" PRIx32 ", ap_tar 0x%" PRIx32 "", swjdp->dp_select_value, swjdp->ap_csw_value, swjdp->ap_tar_value);
|
|
if (ctrlstat & SSTICKYORUN)
|
|
LOG_ERROR("SWJ-DP OVERRUN - check clock or reduce jtag speed");
|
|
|
|
if (ctrlstat & SSTICKYERR)
|
|
LOG_ERROR("SWJ-DP STICKY ERROR");
|
|
|
|
/* Clear Sticky Error Bits */
|
|
scan_inout_check_u32(swjdp, DAP_IR_DPACC, DP_CTRL_STAT, DPAP_WRITE, swjdp->dp_ctrl_stat | SSTICKYORUN | SSTICKYERR, NULL);
|
|
scan_inout_check_u32(swjdp, DAP_IR_DPACC, DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
|
|
if ((retval = jtag_execute_queue()) != ERROR_OK)
|
|
return retval;
|
|
|
|
LOG_DEBUG("swjdp: status 0x%" PRIx32 "", ctrlstat);
|
|
|
|
dap_ap_read_reg_u32(swjdp, AP_REG_CSW, &mem_ap_csw);
|
|
dap_ap_read_reg_u32(swjdp, AP_REG_TAR, &mem_ap_tar);
|
|
if ((retval = jtag_execute_queue()) != ERROR_OK)
|
|
return retval;
|
|
LOG_ERROR("Read MEM_AP_CSW 0x%" PRIx32 ", MEM_AP_TAR 0x%" PRIx32 "", mem_ap_csw, mem_ap_tar);
|
|
|
|
}
|
|
if ((retval = jtag_execute_queue()) != ERROR_OK)
|
|
return retval;
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
/***************************************************************************
|
|
* *
|
|
* DP and MEM-AP register access through APACC and DPACC *
|
|
* *
|
|
***************************************************************************/
|
|
|
|
int dap_dp_write_reg(struct swjdp_common *swjdp, uint32_t value, uint8_t reg_addr)
|
|
{
|
|
return scan_inout_check_u32(swjdp, DAP_IR_DPACC, reg_addr, DPAP_WRITE, value, NULL);
|
|
}
|
|
|
|
int dap_dp_read_reg(struct swjdp_common *swjdp, uint32_t *value, uint8_t reg_addr)
|
|
{
|
|
return scan_inout_check_u32(swjdp, DAP_IR_DPACC, reg_addr, DPAP_READ, 0, value);
|
|
}
|
|
|
|
int dap_ap_select(struct swjdp_common *swjdp,uint8_t apsel)
|
|
{
|
|
uint32_t select;
|
|
select = (apsel << 24) & 0xFF000000;
|
|
|
|
if (select != swjdp->apsel)
|
|
{
|
|
swjdp->apsel = select;
|
|
/* Switching AP invalidates cached values */
|
|
swjdp->dp_select_value = -1;
|
|
swjdp->ap_csw_value = -1;
|
|
swjdp->ap_tar_value = -1;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
int dap_dp_bankselect(struct swjdp_common *swjdp,uint32_t ap_reg)
|
|
{
|
|
uint32_t select;
|
|
select = (ap_reg & 0x000000F0);
|
|
|
|
if (select != swjdp->dp_select_value)
|
|
{
|
|
dap_dp_write_reg(swjdp, select | swjdp->apsel, DP_SELECT);
|
|
swjdp->dp_select_value = select;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
int dap_ap_write_reg(struct swjdp_common *swjdp, uint32_t reg_addr, uint8_t* out_value_buf)
|
|
{
|
|
dap_dp_bankselect(swjdp, reg_addr);
|
|
scan_inout_check(swjdp, DAP_IR_APACC, reg_addr, DPAP_WRITE, out_value_buf, NULL);
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
int dap_ap_read_reg(struct swjdp_common *swjdp, uint32_t reg_addr, uint8_t *in_value_buf)
|
|
{
|
|
dap_dp_bankselect(swjdp, reg_addr);
|
|
scan_inout_check(swjdp, DAP_IR_APACC, reg_addr, DPAP_READ, 0, in_value_buf);
|
|
|
|
return ERROR_OK;
|
|
}
|
|
int dap_ap_write_reg_u32(struct swjdp_common *swjdp, uint32_t reg_addr, uint32_t value)
|
|
{
|
|
uint8_t out_value_buf[4];
|
|
|
|
buf_set_u32(out_value_buf, 0, 32, value);
|
|
dap_dp_bankselect(swjdp, reg_addr);
|
|
scan_inout_check(swjdp, DAP_IR_APACC, reg_addr, DPAP_WRITE, out_value_buf, NULL);
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
int dap_ap_read_reg_u32(struct swjdp_common *swjdp, uint32_t reg_addr, uint32_t *value)
|
|
{
|
|
dap_dp_bankselect(swjdp, reg_addr);
|
|
scan_inout_check_u32(swjdp, DAP_IR_APACC, reg_addr, DPAP_READ, 0, value);
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
/***************************************************************************
|
|
* *
|
|
* AHB-AP access to memory and system registers on AHB bus *
|
|
* *
|
|
***************************************************************************/
|
|
|
|
int dap_setup_accessport(struct swjdp_common *swjdp, uint32_t csw, uint32_t tar)
|
|
{
|
|
csw = csw | CSW_DBGSWENABLE | CSW_MASTER_DEBUG | CSW_HPROT;
|
|
if (csw != swjdp->ap_csw_value)
|
|
{
|
|
/* LOG_DEBUG("swjdp : Set CSW %x",csw); */
|
|
dap_ap_write_reg_u32(swjdp, AP_REG_CSW, csw);
|
|
swjdp->ap_csw_value = csw;
|
|
}
|
|
if (tar != swjdp->ap_tar_value)
|
|
{
|
|
/* LOG_DEBUG("swjdp : Set TAR %x",tar); */
|
|
dap_ap_write_reg_u32(swjdp, AP_REG_TAR, tar);
|
|
swjdp->ap_tar_value = tar;
|
|
}
|
|
if (csw & CSW_ADDRINC_MASK)
|
|
{
|
|
/* Do not cache TAR value when autoincrementing */
|
|
swjdp->ap_tar_value = -1;
|
|
}
|
|
return ERROR_OK;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
* *
|
|
* mem_ap_read_u32(struct swjdp_common *swjdp, uint32_t address, uint32_t *value) *
|
|
* *
|
|
* Read a uint32_t value from memory or system register *
|
|
* Functionally equivalent to target_read_u32(target, address, uint32_t *value), *
|
|
* but with less overhead *
|
|
*****************************************************************************/
|
|
int mem_ap_read_u32(struct swjdp_common *swjdp, uint32_t address, uint32_t *value)
|
|
{
|
|
swjdp->trans_mode = TRANS_MODE_COMPOSITE;
|
|
|
|
dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, address & 0xFFFFFFF0);
|
|
dap_ap_read_reg_u32(swjdp, AP_REG_BD0 | (address & 0xC), value);
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
int mem_ap_read_atomic_u32(struct swjdp_common *swjdp, uint32_t address, uint32_t *value)
|
|
{
|
|
mem_ap_read_u32(swjdp, address, value);
|
|
|
|
return swjdp_transaction_endcheck(swjdp);
|
|
}
|
|
|
|
/*****************************************************************************
|
|
* *
|
|
* mem_ap_write_u32(struct swjdp_common *swjdp, uint32_t address, uint32_t value) *
|
|
* *
|
|
* Write a uint32_t value to memory or memory mapped register *
|
|
* *
|
|
*****************************************************************************/
|
|
int mem_ap_write_u32(struct swjdp_common *swjdp, uint32_t address, uint32_t value)
|
|
{
|
|
swjdp->trans_mode = TRANS_MODE_COMPOSITE;
|
|
|
|
dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, address & 0xFFFFFFF0);
|
|
dap_ap_write_reg_u32(swjdp, AP_REG_BD0 | (address & 0xC), value);
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
int mem_ap_write_atomic_u32(struct swjdp_common *swjdp, uint32_t address, uint32_t value)
|
|
{
|
|
mem_ap_write_u32(swjdp, address, value);
|
|
|
|
return swjdp_transaction_endcheck(swjdp);
|
|
}
|
|
|
|
/*****************************************************************************
|
|
* *
|
|
* mem_ap_write_buf(struct swjdp_common *swjdp, uint8_t *buffer, int count, uint32_t address) *
|
|
* *
|
|
* Write a buffer in target order (little endian) *
|
|
* *
|
|
*****************************************************************************/
|
|
int mem_ap_write_buf_u32(struct swjdp_common *swjdp, uint8_t *buffer, int count, uint32_t address)
|
|
{
|
|
int wcount, blocksize, writecount, errorcount = 0, retval = ERROR_OK;
|
|
uint32_t adr = address;
|
|
uint8_t* pBuffer = buffer;
|
|
|
|
swjdp->trans_mode = TRANS_MODE_COMPOSITE;
|
|
|
|
count >>= 2;
|
|
wcount = count;
|
|
|
|
/* if we have an unaligned access - reorder data */
|
|
if (adr & 0x3u)
|
|
{
|
|
for (writecount = 0; writecount < count; writecount++)
|
|
{
|
|
int i;
|
|
uint32_t outvalue;
|
|
memcpy(&outvalue, pBuffer, sizeof(uint32_t));
|
|
|
|
for (i = 0; i < 4; i++)
|
|
{
|
|
*((uint8_t*)pBuffer + (adr & 0x3)) = outvalue;
|
|
outvalue >>= 8;
|
|
adr++;
|
|
}
|
|
pBuffer += sizeof(uint32_t);
|
|
}
|
|
}
|
|
|
|
while (wcount > 0)
|
|
{
|
|
/* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
|
|
blocksize = max_tar_block_size(swjdp->tar_autoincr_block, address);
|
|
if (wcount < blocksize)
|
|
blocksize = wcount;
|
|
|
|
/* handle unaligned data at 4k boundary */
|
|
if (blocksize == 0)
|
|
blocksize = 1;
|
|
|
|
dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_SINGLE, address);
|
|
|
|
for (writecount = 0; writecount < blocksize; writecount++)
|
|
{
|
|
dap_ap_write_reg(swjdp, AP_REG_DRW, buffer + 4 * writecount);
|
|
}
|
|
|
|
if (swjdp_transaction_endcheck(swjdp) == ERROR_OK)
|
|
{
|
|
wcount = wcount - blocksize;
|
|
address = address + 4 * blocksize;
|
|
buffer = buffer + 4 * blocksize;
|
|
}
|
|
else
|
|
{
|
|
errorcount++;
|
|
}
|
|
|
|
if (errorcount > 1)
|
|
{
|
|
LOG_WARNING("Block write error address 0x%" PRIx32 ", wcount 0x%x", address, wcount);
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
int mem_ap_write_buf_packed_u16(struct swjdp_common *swjdp, uint8_t *buffer, int count, uint32_t address)
|
|
{
|
|
int retval = ERROR_OK;
|
|
int wcount, blocksize, writecount, i;
|
|
|
|
swjdp->trans_mode = TRANS_MODE_COMPOSITE;
|
|
|
|
wcount = count >> 1;
|
|
|
|
while (wcount > 0)
|
|
{
|
|
int nbytes;
|
|
|
|
/* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
|
|
blocksize = max_tar_block_size(swjdp->tar_autoincr_block, address);
|
|
|
|
if (wcount < blocksize)
|
|
blocksize = wcount;
|
|
|
|
/* handle unaligned data at 4k boundary */
|
|
if (blocksize == 0)
|
|
blocksize = 1;
|
|
|
|
dap_setup_accessport(swjdp, CSW_16BIT | CSW_ADDRINC_PACKED, address);
|
|
writecount = blocksize;
|
|
|
|
do
|
|
{
|
|
nbytes = MIN((writecount << 1), 4);
|
|
|
|
if (nbytes < 4)
|
|
{
|
|
if (mem_ap_write_buf_u16(swjdp, buffer, nbytes, address) != ERROR_OK)
|
|
{
|
|
LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
address += nbytes >> 1;
|
|
}
|
|
else
|
|
{
|
|
uint32_t outvalue;
|
|
memcpy(&outvalue, buffer, sizeof(uint32_t));
|
|
|
|
for (i = 0; i < nbytes; i++)
|
|
{
|
|
*((uint8_t*)buffer + (address & 0x3)) = outvalue;
|
|
outvalue >>= 8;
|
|
address++;
|
|
}
|
|
|
|
memcpy(&outvalue, buffer, sizeof(uint32_t));
|
|
dap_ap_write_reg_u32(swjdp, AP_REG_DRW, outvalue);
|
|
if (swjdp_transaction_endcheck(swjdp) != ERROR_OK)
|
|
{
|
|
LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
}
|
|
|
|
buffer += nbytes >> 1;
|
|
writecount -= nbytes >> 1;
|
|
|
|
} while (writecount);
|
|
wcount -= blocksize;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
int mem_ap_write_buf_u16(struct swjdp_common *swjdp, uint8_t *buffer, int count, uint32_t address)
|
|
{
|
|
int retval = ERROR_OK;
|
|
|
|
if (count >= 4)
|
|
return mem_ap_write_buf_packed_u16(swjdp, buffer, count, address);
|
|
|
|
swjdp->trans_mode = TRANS_MODE_COMPOSITE;
|
|
|
|
while (count > 0)
|
|
{
|
|
dap_setup_accessport(swjdp, CSW_16BIT | CSW_ADDRINC_SINGLE, address);
|
|
uint16_t svalue;
|
|
memcpy(&svalue, buffer, sizeof(uint16_t));
|
|
uint32_t outvalue = (uint32_t)svalue << 8 * (address & 0x3);
|
|
dap_ap_write_reg_u32(swjdp, AP_REG_DRW, outvalue);
|
|
retval = swjdp_transaction_endcheck(swjdp);
|
|
count -= 2;
|
|
address += 2;
|
|
buffer += 2;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
int mem_ap_write_buf_packed_u8(struct swjdp_common *swjdp, uint8_t *buffer, int count, uint32_t address)
|
|
{
|
|
int retval = ERROR_OK;
|
|
int wcount, blocksize, writecount, i;
|
|
|
|
swjdp->trans_mode = TRANS_MODE_COMPOSITE;
|
|
|
|
wcount = count;
|
|
|
|
while (wcount > 0)
|
|
{
|
|
int nbytes;
|
|
|
|
/* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
|
|
blocksize = max_tar_block_size(swjdp->tar_autoincr_block, address);
|
|
|
|
if (wcount < blocksize)
|
|
blocksize = wcount;
|
|
|
|
dap_setup_accessport(swjdp, CSW_8BIT | CSW_ADDRINC_PACKED, address);
|
|
writecount = blocksize;
|
|
|
|
do
|
|
{
|
|
nbytes = MIN(writecount, 4);
|
|
|
|
if (nbytes < 4)
|
|
{
|
|
if (mem_ap_write_buf_u8(swjdp, buffer, nbytes, address) != ERROR_OK)
|
|
{
|
|
LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
address += nbytes;
|
|
}
|
|
else
|
|
{
|
|
uint32_t outvalue;
|
|
memcpy(&outvalue, buffer, sizeof(uint32_t));
|
|
|
|
for (i = 0; i < nbytes; i++)
|
|
{
|
|
*((uint8_t*)buffer + (address & 0x3)) = outvalue;
|
|
outvalue >>= 8;
|
|
address++;
|
|
}
|
|
|
|
memcpy(&outvalue, buffer, sizeof(uint32_t));
|
|
dap_ap_write_reg_u32(swjdp, AP_REG_DRW, outvalue);
|
|
if (swjdp_transaction_endcheck(swjdp) != ERROR_OK)
|
|
{
|
|
LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
}
|
|
|
|
buffer += nbytes;
|
|
writecount -= nbytes;
|
|
|
|
} while (writecount);
|
|
wcount -= blocksize;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
int mem_ap_write_buf_u8(struct swjdp_common *swjdp, uint8_t *buffer, int count, uint32_t address)
|
|
{
|
|
int retval = ERROR_OK;
|
|
|
|
if (count >= 4)
|
|
return mem_ap_write_buf_packed_u8(swjdp, buffer, count, address);
|
|
|
|
swjdp->trans_mode = TRANS_MODE_COMPOSITE;
|
|
|
|
while (count > 0)
|
|
{
|
|
dap_setup_accessport(swjdp, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
|
|
uint32_t outvalue = (uint32_t)*buffer << 8 * (address & 0x3);
|
|
dap_ap_write_reg_u32(swjdp, AP_REG_DRW, outvalue);
|
|
retval = swjdp_transaction_endcheck(swjdp);
|
|
count--;
|
|
address++;
|
|
buffer++;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
/*********************************************************************************
|
|
* *
|
|
* mem_ap_read_buf_u32(struct swjdp_common *swjdp, uint8_t *buffer, int count, uint32_t address) *
|
|
* *
|
|
* Read block fast in target order (little endian) into a buffer *
|
|
* *
|
|
**********************************************************************************/
|
|
int mem_ap_read_buf_u32(struct swjdp_common *swjdp, uint8_t *buffer, int count, uint32_t address)
|
|
{
|
|
int wcount, blocksize, readcount, errorcount = 0, retval = ERROR_OK;
|
|
uint32_t adr = address;
|
|
uint8_t* pBuffer = buffer;
|
|
|
|
swjdp->trans_mode = TRANS_MODE_COMPOSITE;
|
|
|
|
count >>= 2;
|
|
wcount = count;
|
|
|
|
while (wcount > 0)
|
|
{
|
|
/* Adjust to read blocks within boundaries aligned to the TAR autoincremnent size*/
|
|
blocksize = max_tar_block_size(swjdp->tar_autoincr_block, address);
|
|
if (wcount < blocksize)
|
|
blocksize = wcount;
|
|
|
|
/* handle unaligned data at 4k boundary */
|
|
if (blocksize == 0)
|
|
blocksize = 1;
|
|
|
|
dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_SINGLE, address);
|
|
|
|
/* Scan out first read */
|
|
adi_jtag_dp_scan(swjdp, DAP_IR_APACC, AP_REG_DRW, DPAP_READ, 0, NULL, NULL);
|
|
for (readcount = 0; readcount < blocksize - 1; readcount++)
|
|
{
|
|
/* Scan out read instruction and scan in previous value */
|
|
adi_jtag_dp_scan(swjdp, DAP_IR_APACC, AP_REG_DRW, DPAP_READ, 0, buffer + 4 * readcount, &swjdp->ack);
|
|
}
|
|
|
|
/* Scan in last value */
|
|
adi_jtag_dp_scan(swjdp, DAP_IR_DPACC, DP_RDBUFF, DPAP_READ, 0, buffer + 4 * readcount, &swjdp->ack);
|
|
if (swjdp_transaction_endcheck(swjdp) == ERROR_OK)
|
|
{
|
|
wcount = wcount - blocksize;
|
|
address += 4 * blocksize;
|
|
buffer += 4 * blocksize;
|
|
}
|
|
else
|
|
{
|
|
errorcount++;
|
|
}
|
|
|
|
if (errorcount > 1)
|
|
{
|
|
LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
}
|
|
|
|
/* if we have an unaligned access - reorder data */
|
|
if (adr & 0x3u)
|
|
{
|
|
for (readcount = 0; readcount < count; readcount++)
|
|
{
|
|
int i;
|
|
uint32_t data;
|
|
memcpy(&data, pBuffer, sizeof(uint32_t));
|
|
|
|
for (i = 0; i < 4; i++)
|
|
{
|
|
*((uint8_t*)pBuffer) = (data >> 8 * (adr & 0x3));
|
|
pBuffer++;
|
|
adr++;
|
|
}
|
|
}
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
int mem_ap_read_buf_packed_u16(struct swjdp_common *swjdp, uint8_t *buffer, int count, uint32_t address)
|
|
{
|
|
uint32_t invalue;
|
|
int retval = ERROR_OK;
|
|
int wcount, blocksize, readcount, i;
|
|
|
|
swjdp->trans_mode = TRANS_MODE_COMPOSITE;
|
|
|
|
wcount = count >> 1;
|
|
|
|
while (wcount > 0)
|
|
{
|
|
int nbytes;
|
|
|
|
/* Adjust to read blocks within boundaries aligned to the TAR autoincremnent size*/
|
|
blocksize = max_tar_block_size(swjdp->tar_autoincr_block, address);
|
|
if (wcount < blocksize)
|
|
blocksize = wcount;
|
|
|
|
dap_setup_accessport(swjdp, CSW_16BIT | CSW_ADDRINC_PACKED, address);
|
|
|
|
/* handle unaligned data at 4k boundary */
|
|
if (blocksize == 0)
|
|
blocksize = 1;
|
|
readcount = blocksize;
|
|
|
|
do
|
|
{
|
|
dap_ap_read_reg_u32(swjdp, AP_REG_DRW, &invalue);
|
|
if (swjdp_transaction_endcheck(swjdp) != ERROR_OK)
|
|
{
|
|
LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
nbytes = MIN((readcount << 1), 4);
|
|
|
|
for (i = 0; i < nbytes; i++)
|
|
{
|
|
*((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
|
|
buffer++;
|
|
address++;
|
|
}
|
|
|
|
readcount -= (nbytes >> 1);
|
|
} while (readcount);
|
|
wcount -= blocksize;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
int mem_ap_read_buf_u16(struct swjdp_common *swjdp, uint8_t *buffer, int count, uint32_t address)
|
|
{
|
|
uint32_t invalue, i;
|
|
int retval = ERROR_OK;
|
|
|
|
if (count >= 4)
|
|
return mem_ap_read_buf_packed_u16(swjdp, buffer, count, address);
|
|
|
|
swjdp->trans_mode = TRANS_MODE_COMPOSITE;
|
|
|
|
while (count > 0)
|
|
{
|
|
dap_setup_accessport(swjdp, CSW_16BIT | CSW_ADDRINC_SINGLE, address);
|
|
dap_ap_read_reg_u32(swjdp, AP_REG_DRW, &invalue);
|
|
retval = swjdp_transaction_endcheck(swjdp);
|
|
if (address & 0x1)
|
|
{
|
|
for (i = 0; i < 2; i++)
|
|
{
|
|
*((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
|
|
buffer++;
|
|
address++;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
uint16_t svalue = (invalue >> 8 * (address & 0x3));
|
|
memcpy(buffer, &svalue, sizeof(uint16_t));
|
|
address += 2;
|
|
buffer += 2;
|
|
}
|
|
count -= 2;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
/* FIX!!! is this a potential performance bottleneck w.r.t. requiring too many
|
|
* roundtrips when jtag_execute_queue() has a large overhead(e.g. for USB)s?
|
|
*
|
|
* The solution is to arrange for a large out/in scan in this loop and
|
|
* and convert data afterwards.
|
|
*/
|
|
int mem_ap_read_buf_packed_u8(struct swjdp_common *swjdp, uint8_t *buffer, int count, uint32_t address)
|
|
{
|
|
uint32_t invalue;
|
|
int retval = ERROR_OK;
|
|
int wcount, blocksize, readcount, i;
|
|
|
|
swjdp->trans_mode = TRANS_MODE_COMPOSITE;
|
|
|
|
wcount = count;
|
|
|
|
while (wcount > 0)
|
|
{
|
|
int nbytes;
|
|
|
|
/* Adjust to read blocks within boundaries aligned to the TAR autoincremnent size*/
|
|
blocksize = max_tar_block_size(swjdp->tar_autoincr_block, address);
|
|
|
|
if (wcount < blocksize)
|
|
blocksize = wcount;
|
|
|
|
dap_setup_accessport(swjdp, CSW_8BIT | CSW_ADDRINC_PACKED, address);
|
|
readcount = blocksize;
|
|
|
|
do
|
|
{
|
|
dap_ap_read_reg_u32(swjdp, AP_REG_DRW, &invalue);
|
|
if (swjdp_transaction_endcheck(swjdp) != ERROR_OK)
|
|
{
|
|
LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
nbytes = MIN(readcount, 4);
|
|
|
|
for (i = 0; i < nbytes; i++)
|
|
{
|
|
*((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
|
|
buffer++;
|
|
address++;
|
|
}
|
|
|
|
readcount -= nbytes;
|
|
} while (readcount);
|
|
wcount -= blocksize;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
int mem_ap_read_buf_u8(struct swjdp_common *swjdp, uint8_t *buffer, int count, uint32_t address)
|
|
{
|
|
uint32_t invalue;
|
|
int retval = ERROR_OK;
|
|
|
|
if (count >= 4)
|
|
return mem_ap_read_buf_packed_u8(swjdp, buffer, count, address);
|
|
|
|
swjdp->trans_mode = TRANS_MODE_COMPOSITE;
|
|
|
|
while (count > 0)
|
|
{
|
|
dap_setup_accessport(swjdp, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
|
|
dap_ap_read_reg_u32(swjdp, AP_REG_DRW, &invalue);
|
|
retval = swjdp_transaction_endcheck(swjdp);
|
|
*((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
|
|
count--;
|
|
address++;
|
|
buffer++;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
int ahbap_debugport_init(struct swjdp_common *swjdp)
|
|
{
|
|
uint32_t idreg, romaddr, dummy;
|
|
uint32_t ctrlstat;
|
|
int cnt = 0;
|
|
int retval;
|
|
|
|
LOG_DEBUG(" ");
|
|
|
|
swjdp->apsel = 0;
|
|
swjdp->ap_csw_value = -1;
|
|
swjdp->ap_tar_value = -1;
|
|
swjdp->trans_mode = TRANS_MODE_ATOMIC;
|
|
dap_dp_read_reg(swjdp, &dummy, DP_CTRL_STAT);
|
|
dap_dp_write_reg(swjdp, SSTICKYERR, DP_CTRL_STAT);
|
|
dap_dp_read_reg(swjdp, &dummy, DP_CTRL_STAT);
|
|
|
|
swjdp->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
|
|
|
|
dap_dp_write_reg(swjdp, swjdp->dp_ctrl_stat, DP_CTRL_STAT);
|
|
dap_dp_read_reg(swjdp, &ctrlstat, DP_CTRL_STAT);
|
|
if ((retval = jtag_execute_queue()) != ERROR_OK)
|
|
return retval;
|
|
|
|
/* Check that we have debug power domains activated */
|
|
while (!(ctrlstat & CDBGPWRUPACK) && (cnt++ < 10))
|
|
{
|
|
LOG_DEBUG("swjdp: wait CDBGPWRUPACK");
|
|
dap_dp_read_reg(swjdp, &ctrlstat, DP_CTRL_STAT);
|
|
if ((retval = jtag_execute_queue()) != ERROR_OK)
|
|
return retval;
|
|
alive_sleep(10);
|
|
}
|
|
|
|
while (!(ctrlstat & CSYSPWRUPACK) && (cnt++ < 10))
|
|
{
|
|
LOG_DEBUG("swjdp: wait CSYSPWRUPACK");
|
|
dap_dp_read_reg(swjdp, &ctrlstat, DP_CTRL_STAT);
|
|
if ((retval = jtag_execute_queue()) != ERROR_OK)
|
|
return retval;
|
|
alive_sleep(10);
|
|
}
|
|
|
|
dap_dp_read_reg(swjdp, &dummy, DP_CTRL_STAT);
|
|
/* With debug power on we can activate OVERRUN checking */
|
|
swjdp->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ | CORUNDETECT;
|
|
dap_dp_write_reg(swjdp, swjdp->dp_ctrl_stat, DP_CTRL_STAT);
|
|
dap_dp_read_reg(swjdp, &dummy, DP_CTRL_STAT);
|
|
|
|
dap_ap_read_reg_u32(swjdp, 0xFC, &idreg);
|
|
dap_ap_read_reg_u32(swjdp, 0xF8, &romaddr);
|
|
|
|
LOG_DEBUG("AHB-AP ID Register 0x%" PRIx32 ", Debug ROM Address 0x%" PRIx32 "", idreg, romaddr);
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
/* CID interpretation -- see ARM IHI 0029B section 3
|
|
* and ARM IHI 0031A table 13-3.
|
|
*/
|
|
static const char *class_description[16] ={
|
|
"Reserved", "ROM table", "Reserved", "Reserved",
|
|
"Reserved", "Reserved", "Reserved", "Reserved",
|
|
"Reserved", "CoreSight component", "Reserved", "Peripheral Test Block",
|
|
"Reserved", "OptimoDE DESS",
|
|
"Generic IP component", "PrimeCell or System component"
|
|
};
|
|
|
|
static bool
|
|
is_dap_cid_ok(uint32_t cid3, uint32_t cid2, uint32_t cid1, uint32_t cid0)
|
|
{
|
|
return cid3 == 0xb1 && cid2 == 0x05
|
|
&& ((cid1 & 0x0f) == 0) && cid0 == 0x0d;
|
|
}
|
|
|
|
int dap_info_command(struct command_context *cmd_ctx, struct swjdp_common *swjdp, int apsel)
|
|
{
|
|
|
|
uint32_t dbgbase,apid;
|
|
int romtable_present = 0;
|
|
uint8_t mem_ap;
|
|
uint32_t apselold;
|
|
|
|
apselold = swjdp->apsel;
|
|
dap_ap_select(swjdp, apsel);
|
|
dap_ap_read_reg_u32(swjdp, 0xF8, &dbgbase);
|
|
dap_ap_read_reg_u32(swjdp, 0xFC, &apid);
|
|
swjdp_transaction_endcheck(swjdp);
|
|
/* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
|
|
mem_ap = ((apid&0x10000) && ((apid&0x0F) != 0));
|
|
command_print(cmd_ctx, "ap identification register 0x%8.8" PRIx32 "", apid);
|
|
if (apid)
|
|
{
|
|
switch (apid&0x0F)
|
|
{
|
|
case 0:
|
|
command_print(cmd_ctx, "\tType is jtag-ap");
|
|
break;
|
|
case 1:
|
|
command_print(cmd_ctx, "\tType is mem-ap AHB");
|
|
break;
|
|
case 2:
|
|
command_print(cmd_ctx, "\tType is mem-ap APB");
|
|
break;
|
|
default:
|
|
command_print(cmd_ctx, "\tUnknown AP-type");
|
|
break;
|
|
}
|
|
command_print(cmd_ctx, "ap debugbase 0x%8.8" PRIx32 "", dbgbase);
|
|
}
|
|
else
|
|
{
|
|
command_print(cmd_ctx, "No AP found at this apsel 0x%x", apsel);
|
|
}
|
|
|
|
romtable_present = ((mem_ap) && (dbgbase != 0xFFFFFFFF));
|
|
if (romtable_present)
|
|
{
|
|
uint32_t cid0,cid1,cid2,cid3,memtype,romentry;
|
|
uint16_t entry_offset;
|
|
|
|
/* bit 16 of apid indicates a memory access port */
|
|
if (dbgbase & 0x02)
|
|
command_print(cmd_ctx, "\tValid ROM table present");
|
|
else
|
|
command_print(cmd_ctx, "\tROM table in legacy format");
|
|
|
|
/* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
|
|
mem_ap_read_u32(swjdp, (dbgbase&0xFFFFF000) | 0xFF0, &cid0);
|
|
mem_ap_read_u32(swjdp, (dbgbase&0xFFFFF000) | 0xFF4, &cid1);
|
|
mem_ap_read_u32(swjdp, (dbgbase&0xFFFFF000) | 0xFF8, &cid2);
|
|
mem_ap_read_u32(swjdp, (dbgbase&0xFFFFF000) | 0xFFC, &cid3);
|
|
mem_ap_read_u32(swjdp, (dbgbase&0xFFFFF000) | 0xFCC, &memtype);
|
|
swjdp_transaction_endcheck(swjdp);
|
|
if (!is_dap_cid_ok(cid3, cid2, cid1, cid0))
|
|
command_print(cmd_ctx, "\tCID3 0x%2.2" PRIx32
|
|
", CID2 0x%2.2" PRIx32
|
|
", CID1 0x%2.2" PRIx32
|
|
", CID0 0x%2.2" PRIx32,
|
|
cid3, cid2, cid1, cid0);
|
|
if (memtype & 0x01)
|
|
command_print(cmd_ctx, "\tMEMTYPE system memory present on bus");
|
|
else
|
|
command_print(cmd_ctx, "\tMEMTYPE System memory not present. "
|
|
"Dedicated debug bus.");
|
|
|
|
/* Now we read ROM table entries from dbgbase&0xFFFFF000) | 0x000 until we get 0x00000000 */
|
|
entry_offset = 0;
|
|
do
|
|
{
|
|
mem_ap_read_atomic_u32(swjdp, (dbgbase&0xFFFFF000) | entry_offset, &romentry);
|
|
command_print(cmd_ctx, "\tROMTABLE[0x%x] = 0x%" PRIx32 "",entry_offset,romentry);
|
|
if (romentry&0x01)
|
|
{
|
|
uint32_t c_cid0, c_cid1, c_cid2, c_cid3;
|
|
uint32_t c_pid0, c_pid1, c_pid2, c_pid3, c_pid4;
|
|
uint32_t component_start, component_base;
|
|
unsigned part_num;
|
|
char *type, *full;
|
|
|
|
component_base = (uint32_t)((dbgbase & 0xFFFFF000)
|
|
+ (int)(romentry & 0xFFFFF000));
|
|
mem_ap_read_atomic_u32(swjdp,
|
|
(component_base & 0xFFFFF000) | 0xFE0, &c_pid0);
|
|
mem_ap_read_atomic_u32(swjdp,
|
|
(component_base & 0xFFFFF000) | 0xFE4, &c_pid1);
|
|
mem_ap_read_atomic_u32(swjdp,
|
|
(component_base & 0xFFFFF000) | 0xFE8, &c_pid2);
|
|
mem_ap_read_atomic_u32(swjdp,
|
|
(component_base & 0xFFFFF000) | 0xFEC, &c_pid3);
|
|
mem_ap_read_atomic_u32(swjdp,
|
|
(component_base & 0xFFFFF000) | 0xFD0, &c_pid4);
|
|
mem_ap_read_atomic_u32(swjdp,
|
|
(component_base & 0xFFFFF000) | 0xFF0, &c_cid0);
|
|
mem_ap_read_atomic_u32(swjdp,
|
|
(component_base & 0xFFFFF000) | 0xFF4, &c_cid1);
|
|
mem_ap_read_atomic_u32(swjdp,
|
|
(component_base & 0xFFFFF000) | 0xFF8, &c_cid2);
|
|
mem_ap_read_atomic_u32(swjdp,
|
|
(component_base & 0xFFFFF000) | 0xFFC, &c_cid3);
|
|
component_start = component_base - 0x1000*(c_pid4 >> 4);
|
|
|
|
command_print(cmd_ctx, "\t\tComponent base address 0x%" PRIx32
|
|
", start address 0x%" PRIx32,
|
|
component_base, component_start);
|
|
command_print(cmd_ctx, "\t\tComponent class is 0x%x, %s",
|
|
(int) (c_cid1 >> 4) & 0xf,
|
|
/* See ARM IHI 0029B Table 3-3 */
|
|
class_description[(c_cid1 >> 4) & 0xf]);
|
|
|
|
/* CoreSight component? */
|
|
if (((c_cid1 >> 4) & 0x0f) == 9) {
|
|
uint32_t devtype;
|
|
unsigned minor;
|
|
char *major = "Reserved", *subtype = "Reserved";
|
|
|
|
mem_ap_read_atomic_u32(swjdp,
|
|
(component_base & 0xfffff000) | 0xfcc,
|
|
&devtype);
|
|
minor = (devtype >> 4) & 0x0f;
|
|
switch (devtype & 0x0f) {
|
|
case 0:
|
|
major = "Miscellaneous";
|
|
switch (minor) {
|
|
case 0:
|
|
subtype = "other";
|
|
break;
|
|
case 4:
|
|
subtype = "Validation component";
|
|
break;
|
|
}
|
|
break;
|
|
case 1:
|
|
major = "Trace Sink";
|
|
switch (minor) {
|
|
case 0:
|
|
subtype = "other";
|
|
break;
|
|
case 1:
|
|
subtype = "Port";
|
|
break;
|
|
case 2:
|
|
subtype = "Buffer";
|
|
break;
|
|
}
|
|
break;
|
|
case 2:
|
|
major = "Trace Link";
|
|
switch (minor) {
|
|
case 0:
|
|
subtype = "other";
|
|
break;
|
|
case 1:
|
|
subtype = "Funnel, router";
|
|
break;
|
|
case 2:
|
|
subtype = "Filter";
|
|
break;
|
|
case 3:
|
|
subtype = "FIFO, buffer";
|
|
break;
|
|
}
|
|
break;
|
|
case 3:
|
|
major = "Trace Source";
|
|
switch (minor) {
|
|
case 0:
|
|
subtype = "other";
|
|
break;
|
|
case 1:
|
|
subtype = "Processor";
|
|
break;
|
|
case 2:
|
|
subtype = "DSP";
|
|
break;
|
|
case 3:
|
|
subtype = "Engine/Coprocessor";
|
|
break;
|
|
case 4:
|
|
subtype = "Bus";
|
|
break;
|
|
}
|
|
break;
|
|
case 4:
|
|
major = "Debug Control";
|
|
switch (minor) {
|
|
case 0:
|
|
subtype = "other";
|
|
break;
|
|
case 1:
|
|
subtype = "Trigger Matrix";
|
|
break;
|
|
case 2:
|
|
subtype = "Debug Auth";
|
|
break;
|
|
}
|
|
break;
|
|
case 5:
|
|
major = "Debug Logic";
|
|
switch (minor) {
|
|
case 0:
|
|
subtype = "other";
|
|
break;
|
|
case 1:
|
|
subtype = "Processor";
|
|
break;
|
|
case 2:
|
|
subtype = "DSP";
|
|
break;
|
|
case 3:
|
|
subtype = "Engine/Coprocessor";
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
command_print(cmd_ctx, "\t\tType is 0x%2.2x, %s, %s",
|
|
(unsigned) (devtype & 0xff),
|
|
major, subtype);
|
|
/* REVISIT also show 0xfc8 DevId */
|
|
}
|
|
|
|
if (!is_dap_cid_ok(cid3, cid2, cid1, cid0))
|
|
command_print(cmd_ctx, "\t\tCID3 0x%2.2" PRIx32
|
|
", CID2 0x%2.2" PRIx32
|
|
", CID1 0x%2.2" PRIx32
|
|
", CID0 0x%2.2" PRIx32,
|
|
c_cid3, c_cid2, c_cid1, c_cid0);
|
|
command_print(cmd_ctx, "\t\tPeripheral ID[4..0] = hex "
|
|
"%2.2x %2.2x %2.2x %2.2x %2.2x",
|
|
(int) c_pid4,
|
|
(int) c_pid3, (int) c_pid2,
|
|
(int) c_pid1, (int) c_pid0);
|
|
|
|
/* Part number interpretations are from Cortex
|
|
* core specs, the CoreSight components TRM
|
|
* (ARM DDI 0314H), and ETM specs; also from
|
|
* chip observation (e.g. TI SDTI).
|
|
*/
|
|
part_num = c_pid0 & 0xff;
|
|
part_num |= (c_pid1 & 0x0f) << 8;
|
|
switch (part_num) {
|
|
case 0x000:
|
|
type = "Cortex-M3 NVIC";
|
|
full = "(Interrupt Controller)";
|
|
break;
|
|
case 0x001:
|
|
type = "Cortex-M3 ITM";
|
|
full = "(Instrumentation Trace Module)";
|
|
break;
|
|
case 0x002:
|
|
type = "Cortex-M3 DWT";
|
|
full = "(Data Watchpoint and Trace)";
|
|
break;
|
|
case 0x003:
|
|
type = "Cortex-M3 FBP";
|
|
full = "(Flash Patch and Breakpoint)";
|
|
break;
|
|
case 0x00d:
|
|
type = "CoreSight ETM11";
|
|
full = "(Embedded Trace)";
|
|
break;
|
|
// case 0x113: what?
|
|
case 0x120: /* from OMAP3 memmap */
|
|
type = "TI SDTI";
|
|
full = "(System Debug Trace Interface)";
|
|
break;
|
|
case 0x343: /* from OMAP3 memmap */
|
|
type = "TI DAPCTL";
|
|
full = "";
|
|
break;
|
|
case 0x4e0:
|
|
type = "Cortex-M3 ETM";
|
|
full = "(Embedded Trace)";
|
|
break;
|
|
case 0x906:
|
|
type = "Coresight CTI";
|
|
full = "(Cross Trigger)";
|
|
break;
|
|
case 0x907:
|
|
type = "Coresight ETB";
|
|
full = "(Trace Buffer)";
|
|
break;
|
|
case 0x908:
|
|
type = "Coresight CSTF";
|
|
full = "(Trace Funnel)";
|
|
break;
|
|
case 0x910:
|
|
type = "CoreSight ETM9";
|
|
full = "(Embedded Trace)";
|
|
break;
|
|
case 0x912:
|
|
type = "Coresight TPIU";
|
|
full = "(Trace Port Interface Unit)";
|
|
break;
|
|
case 0x921:
|
|
type = "Cortex-A8 ETM";
|
|
full = "(Embedded Trace)";
|
|
break;
|
|
case 0x922:
|
|
type = "Cortex-A8 CTI";
|
|
full = "(Cross Trigger)";
|
|
break;
|
|
case 0x923:
|
|
type = "Cortex-M3 TPIU";
|
|
full = "(Trace Port Interface Unit)";
|
|
break;
|
|
case 0xc08:
|
|
type = "Cortex-A8 Debug";
|
|
full = "(Debug Unit)";
|
|
break;
|
|
default:
|
|
type = "-*- unrecognized -*-";
|
|
full = "";
|
|
break;
|
|
}
|
|
command_print(cmd_ctx, "\t\tPart is %s %s",
|
|
type, full);
|
|
}
|
|
else
|
|
{
|
|
if (romentry)
|
|
command_print(cmd_ctx, "\t\tComponent not present");
|
|
else
|
|
command_print(cmd_ctx, "\t\tEnd of ROM table");
|
|
}
|
|
entry_offset += 4;
|
|
} while (romentry > 0);
|
|
}
|
|
else
|
|
{
|
|
command_print(cmd_ctx, "\tNo ROM table present");
|
|
}
|
|
dap_ap_select(swjdp, apselold);
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
DAP_COMMAND_HANDLER(dap_baseaddr_command)
|
|
{
|
|
uint32_t apsel, apselsave, baseaddr;
|
|
int retval;
|
|
|
|
apselsave = swjdp->apsel;
|
|
switch (CMD_ARGC) {
|
|
case 0:
|
|
apsel = swjdp->apsel;
|
|
break;
|
|
case 1:
|
|
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
|
|
break;
|
|
default:
|
|
return ERROR_COMMAND_SYNTAX_ERROR;
|
|
}
|
|
|
|
if (apselsave != apsel)
|
|
dap_ap_select(swjdp, apsel);
|
|
|
|
dap_ap_read_reg_u32(swjdp, 0xF8, &baseaddr);
|
|
retval = swjdp_transaction_endcheck(swjdp);
|
|
command_print(CMD_CTX, "0x%8.8" PRIx32, baseaddr);
|
|
|
|
if (apselsave != apsel)
|
|
dap_ap_select(swjdp, apselsave);
|
|
|
|
return retval;
|
|
}
|
|
|
|
DAP_COMMAND_HANDLER(dap_memaccess_command)
|
|
{
|
|
uint32_t memaccess_tck;
|
|
|
|
switch (CMD_ARGC) {
|
|
case 0:
|
|
memaccess_tck = swjdp->memaccess_tck;
|
|
break;
|
|
case 1:
|
|
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], memaccess_tck);
|
|
break;
|
|
default:
|
|
return ERROR_COMMAND_SYNTAX_ERROR;
|
|
}
|
|
swjdp->memaccess_tck = memaccess_tck;
|
|
|
|
command_print(CMD_CTX, "memory bus access delay set to %" PRIi32 " tck",
|
|
swjdp->memaccess_tck);
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
DAP_COMMAND_HANDLER(dap_apsel_command)
|
|
{
|
|
uint32_t apsel, apid;
|
|
int retval;
|
|
|
|
switch (CMD_ARGC) {
|
|
case 0:
|
|
apsel = 0;
|
|
break;
|
|
case 1:
|
|
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
|
|
break;
|
|
default:
|
|
return ERROR_COMMAND_SYNTAX_ERROR;
|
|
}
|
|
|
|
dap_ap_select(swjdp, apsel);
|
|
dap_ap_read_reg_u32(swjdp, 0xFC, &apid);
|
|
retval = swjdp_transaction_endcheck(swjdp);
|
|
command_print(CMD_CTX, "ap %" PRIi32 " selected, identification register 0x%8.8" PRIx32,
|
|
apsel, apid);
|
|
|
|
return retval;
|
|
}
|
|
|
|
DAP_COMMAND_HANDLER(dap_apid_command)
|
|
{
|
|
uint32_t apsel, apselsave, apid;
|
|
int retval;
|
|
|
|
apselsave = swjdp->apsel;
|
|
switch (CMD_ARGC) {
|
|
case 0:
|
|
apsel = swjdp->apsel;
|
|
break;
|
|
case 1:
|
|
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
|
|
break;
|
|
default:
|
|
return ERROR_COMMAND_SYNTAX_ERROR;
|
|
}
|
|
|
|
if (apselsave != apsel)
|
|
dap_ap_select(swjdp, apsel);
|
|
|
|
dap_ap_read_reg_u32(swjdp, 0xFC, &apid);
|
|
retval = swjdp_transaction_endcheck(swjdp);
|
|
command_print(CMD_CTX, "0x%8.8" PRIx32, apid);
|
|
if (apselsave != apsel)
|
|
dap_ap_select(swjdp, apselsave);
|
|
|
|
return retval;
|
|
}
|