Erhan Kurubas 5d78bc8ba6 tcl/interface: add Espressif builtin usb_jtag config file. ... This config file enables communication over USB-JTAG with ESP32-C3, ESP32-S3, ESP32-H2 and ESP32-C6 chips Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: Iceea26972588d8c4919d1f3248684ece48ca9121 Reviewed-on: https://review.openocd.org/c/openocd/+/7748 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>		2023-07-19 00:11:22 +02:00
..
ft232r	tcl/interface: replace last deprecated commands	2022-09-13 22:16:37 +00:00
ftdi	Merge commit '1293ddd65713d6551775b67169387622ada477c1' into from_upstream	2023-03-16 18:02:35 -07:00
altera-usb-blaster.cfg	…
altera-usb-blaster2.cfg	…
arm-jtag-ew.cfg	…
ast2600-gpiod.cfg	tcl/interface: add linuxgpiod cfg for Aspeed AST2600	2022-08-20 15:30:20 +00:00
at91rm9200.cfg	…
beaglebone-jtag-native.cfg	…
beaglebone-swd-native.cfg	…
buspirate.cfg	…
calao-usb-a9260.cfg	…
chameleon.cfg	…
cmsis-dap.cfg	…
dln-2-gpiod.cfg	drivers/linuxgpiod: Migrate to adapter gpio commands	2022-08-15 13:24:54 +00:00
dummy.cfg	…
esp_usb_bridge.cfg	…
esp_usb_jtag.cfg	tcl/interface: add Espressif builtin usb_jtag config file.	2023-07-19 00:11:22 +02:00
estick.cfg	…
flashlink.cfg	…
ft232r.cfg	…
imx-native.cfg	…
jlink.cfg	…
jtag_dpi.cfg	…
jtag_hat_rpi2.cfg	drivers/bcm2835gpio: Migrate to adapter gpio commands	2022-09-13 22:17:14 +00:00
jtag_vpi.cfg	…
kitprog.cfg	…
nulink.cfg	…
opendous.cfg	…
openjtag.cfg	…
osbdm.cfg	…
parport.cfg	…
parport_dlc5.cfg	…
raspberrypi-native.cfg	drivers/bcm2835gpio: Migrate to adapter gpio commands	2022-09-13 22:17:14 +00:00
raspberrypi2-native.cfg	tcl/interface: fix raspberrypi2-native.cfg speed coefficient	2022-11-15 09:54:06 +00:00
rlink.cfg	…
rshim.cfg	…
stlink-dap.cfg	…
stlink-v1.cfg	…
stlink-v2-1.cfg	…
stlink-v2.cfg	…
stlink.cfg	…
sysfsgpio-raspberrypi.cfg	…
ti-icdi.cfg	…
ulink.cfg	…
usb-jtag.cfg	…
usbprog.cfg	…
vdebug.cfg	…
vsllink.cfg	…
xds110.cfg	…