81 lines
2.4 KiB
INI
81 lines
2.4 KiB
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
# RP2040 is a microcontroller with dual Cortex-M0+ core.
|
|
# https://www.raspberrypi.com/documentation/microcontrollers/rp2040.html
|
|
|
|
# The device requires multidrop SWD for debug.
|
|
transport select swd
|
|
|
|
source [find target/swj-dp.tcl]
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME rp2040
|
|
}
|
|
|
|
if { [info exists WORKAREASIZE] } {
|
|
set _WORKAREASIZE $WORKAREASIZE
|
|
} else {
|
|
set _WORKAREASIZE 0x10000
|
|
}
|
|
|
|
if { [info exists CPUTAPID] } {
|
|
set _CPUTAPID $CPUTAPID
|
|
} else {
|
|
set _CPUTAPID 0x01002927
|
|
}
|
|
|
|
# Set to '0' or '1' for single core configuration, 'SMP' for -rtos hwthread
|
|
# handling of both cores, anything else for isolated debugging of both cores
|
|
if { [info exists USE_CORE] } {
|
|
set _USE_CORE $USE_CORE
|
|
} else {
|
|
set _USE_CORE SMP
|
|
}
|
|
set _BOTH_CORES [expr { $_USE_CORE != 0 && $_USE_CORE != 1 }]
|
|
|
|
swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID
|
|
|
|
# core 0
|
|
if { $_USE_CORE != 1 } {
|
|
dap create $_CHIPNAME.dap0 -chain-position $_CHIPNAME.cpu -dp-id $_CPUTAPID -instance-id 0
|
|
set _TARGETNAME_0 $_CHIPNAME.core0
|
|
target create $_TARGETNAME_0 cortex_m -dap $_CHIPNAME.dap0 -coreid 0
|
|
# srst does not exist; use SYSRESETREQ to perform a soft reset
|
|
$_TARGETNAME_0 cortex_m reset_config sysresetreq
|
|
}
|
|
|
|
# core 1
|
|
if { $_USE_CORE != 0 } {
|
|
dap create $_CHIPNAME.dap1 -chain-position $_CHIPNAME.cpu -dp-id $_CPUTAPID -instance-id 1
|
|
set _TARGETNAME_1 $_CHIPNAME.core1
|
|
target create $_TARGETNAME_1 cortex_m -dap $_CHIPNAME.dap1 -coreid 1
|
|
$_TARGETNAME_1 cortex_m reset_config sysresetreq
|
|
}
|
|
|
|
if {[string compare $_USE_CORE SMP] == 0} {
|
|
$_TARGETNAME_0 configure -rtos hwthread
|
|
$_TARGETNAME_1 configure -rtos hwthread
|
|
target smp $_TARGETNAME_0 $_TARGETNAME_1
|
|
}
|
|
|
|
if { $_USE_CORE == 1 } {
|
|
set _FLASH_TARGET $_TARGETNAME_1
|
|
} else {
|
|
set _FLASH_TARGET $_TARGETNAME_0
|
|
}
|
|
# Backup the work area. The flash probe runs an algorithm on the target CPU.
|
|
# The flash is probed during gdb connect if gdb_memory_map is enabled (by default).
|
|
$_FLASH_TARGET configure -work-area-phys 0x20010000 -work-area-size $_WORKAREASIZE -work-area-backup 1
|
|
set _FLASHNAME $_CHIPNAME.flash
|
|
flash bank $_FLASHNAME rp2040_flash 0x10000000 0 0 0 $_FLASH_TARGET
|
|
|
|
if { $_BOTH_CORES } {
|
|
# Alias to ensure gdb connecting to core 1 gets the correct memory map
|
|
flash bank $_CHIPNAME.alias virtual 0x10000000 0 0 0 $_TARGETNAME_1 $_FLASHNAME
|
|
|
|
# Select core 0
|
|
targets $_TARGETNAME_0
|
|
}
|