riscv-openocd/tcl/interface
Grzegorz Kostka 83c67b7ac7 imx_gpio: add mmap based jtag interface for IMX processors
For some targets (like nrf51) sysfs driver is too slow. This
patch implements memory maped driver for IMX processors.
Mostly based on bcm2835gpio. Tested on imx6ul CPU. However, it should
work on any NXP IMX CPU.

Change-Id: Idace4c98181c6e9c64dd158bfa52631204b5c4a7
Signed-off-by: Grzegorz Kostka <kostka.grzegorz@gmail.com>
Reviewed-on: http://openocd.zylin.com/4106
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-05-31 08:16:17 +01:00
..
ftdi added interface config file for In-Circuit's ICprog OpenOCD JTAG adapter 2017-04-23 21:20:17 +01:00
altera-usb-blaster.cfg jtag_interface: .speed can be NULL when not needed 2013-02-08 22:33:19 +00:00
altera-usb-blaster2.cfg jtag/drivers: add USB-Blaster II 2014-01-20 13:28:02 +00:00
arm-jtag-ew.cfg
at91rm9200.cfg
buspirate.cfg
calao-usb-a9260.cfg
chameleon.cfg
cmsis-dap.cfg cmsis-dap: add serial number support 2014-10-16 12:30:50 +00:00
dummy.cfg
estick.cfg jtag: add opendous and estick support 2012-05-14 09:41:49 +00:00
flashlink.cfg
imx-native.cfg imx_gpio: add mmap based jtag interface for IMX processors 2017-05-31 08:16:17 +01:00
jlink.cfg interface/jlink: Fix comment about serial number 2016-04-12 17:03:02 +01:00
jtag_vpi.cfg jtag_vpi: make the server address configurable 2013-12-31 12:00:49 +00:00
kitprog.cfg jtag/drivers: Add Cypress KitProg driver 2017-05-12 10:08:43 +01:00
nds32-aice.cfg aice: add Andes AICE support 2013-06-05 19:27:23 +00:00
opendous.cfg jtag: add opendous and estick support 2012-05-14 09:41:49 +00:00
openjtag.cfg Added OpenJTAG Driver 2013-06-05 19:52:15 +00:00
osbdm.cfg jtag_interface: .speed can be NULL when not needed 2013-02-08 22:33:19 +00:00
parport.cfg tcl/interface/parport: default to sane value on non-windows systems 2015-04-14 11:42:32 +01:00
parport_dlc5.cfg
raspberrypi-native.cfg bcm2835gpio: Add SWD support, Raspberry Pi 2 support. 2015-08-06 13:16:02 +01:00
raspberrypi2-native.cfg bcm2835gpio: Add SWD support, Raspberry Pi 2 support. 2015-08-06 13:16:02 +01:00
rlink.cfg
stlink-v1.cfg jtag_interface: .speed can be NULL when not needed 2013-02-08 22:33:19 +00:00
stlink-v2-1.cfg Support hla_serial command for ST-LINK adapters. 2014-09-22 19:36:05 +00:00
stlink-v2.cfg Support hla_serial command for ST-LINK adapters. 2014-09-22 19:36:05 +00:00
sysfsgpio-raspberrypi.cfg jtag_interface: .speed can be NULL when not needed 2013-02-08 22:33:19 +00:00
ti-icdi.cfg jtag_interface: .speed can be NULL when not needed 2013-02-08 22:33:19 +00:00
ulink.cfg interface configs: Add missing URLs and names. 2011-11-03 23:53:26 +00:00
usb-jtag.cfg Remove support for the GPL incompatible FTDI D2XX library 2016-11-06 09:47:12 +00:00
usbprog.cfg
vsllink.cfg