1557 lines
42 KiB
C
1557 lines
42 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
/***************************************************************************
|
|
* Copyright (C) 2009 by Simon Qian *
|
|
* SimonQian@SimonQian.com *
|
|
***************************************************************************/
|
|
|
|
/* The specification for SVF is available here:
|
|
* http://www.asset-intertech.com/support/svf.pdf
|
|
* Below, this document is referred to as the "SVF spec".
|
|
*
|
|
* The specification for XSVF is available here:
|
|
* http://www.xilinx.com/support/documentation/application_notes/xapp503.pdf
|
|
* Below, this document is referred to as the "XSVF spec".
|
|
*/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include "config.h"
|
|
#endif
|
|
|
|
#include <jtag/jtag.h>
|
|
#include "svf.h"
|
|
#include "helper/system.h"
|
|
#include <helper/time_support.h>
|
|
|
|
/* SVF command */
|
|
enum svf_command {
|
|
ENDDR,
|
|
ENDIR,
|
|
FREQUENCY,
|
|
HDR,
|
|
HIR,
|
|
PIO,
|
|
PIOMAP,
|
|
RUNTEST,
|
|
SDR,
|
|
SIR,
|
|
STATE,
|
|
TDR,
|
|
TIR,
|
|
TRST,
|
|
};
|
|
|
|
static const char *svf_command_name[14] = {
|
|
"ENDDR",
|
|
"ENDIR",
|
|
"FREQUENCY",
|
|
"HDR",
|
|
"HIR",
|
|
"PIO",
|
|
"PIOMAP",
|
|
"RUNTEST",
|
|
"SDR",
|
|
"SIR",
|
|
"STATE",
|
|
"TDR",
|
|
"TIR",
|
|
"TRST"
|
|
};
|
|
|
|
enum trst_mode {
|
|
TRST_ON,
|
|
TRST_OFF,
|
|
TRST_Z,
|
|
TRST_ABSENT
|
|
};
|
|
|
|
static const char *svf_trst_mode_name[4] = {
|
|
"ON",
|
|
"OFF",
|
|
"Z",
|
|
"ABSENT"
|
|
};
|
|
|
|
struct svf_statemove {
|
|
tap_state_t from;
|
|
tap_state_t to;
|
|
uint32_t num_of_moves;
|
|
tap_state_t paths[8];
|
|
};
|
|
|
|
/*
|
|
* These paths are from the SVF specification for the STATE command, to be
|
|
* used when the STATE command only includes the final state. The first
|
|
* element of the path is the "from" (current) state, and the last one is
|
|
* the "to" (target) state.
|
|
*
|
|
* All specified paths are the shortest ones in the JTAG spec, and are thus
|
|
* not (!!) exact matches for the paths used elsewhere in OpenOCD. Note
|
|
* that PAUSE-to-PAUSE transitions all go through UPDATE and then CAPTURE,
|
|
* which has specific effects on the various registers; they are not NOPs.
|
|
*
|
|
* Paths to RESET are disabled here. As elsewhere in OpenOCD, and in XSVF
|
|
* and many SVF implementations, we don't want to risk missing that state.
|
|
* To get to RESET, always we ignore the current state.
|
|
*/
|
|
static const struct svf_statemove svf_statemoves[] = {
|
|
/* from to num_of_moves, paths[8] */
|
|
/* {TAP_RESET, TAP_RESET, 1, {TAP_RESET}}, */
|
|
{TAP_RESET, TAP_IDLE, 2, {TAP_RESET, TAP_IDLE} },
|
|
{TAP_RESET, TAP_DRPAUSE, 6, {TAP_RESET, TAP_IDLE, TAP_DRSELECT,
|
|
TAP_DRCAPTURE, TAP_DREXIT1, TAP_DRPAUSE} },
|
|
{TAP_RESET, TAP_IRPAUSE, 7, {TAP_RESET, TAP_IDLE, TAP_DRSELECT,
|
|
TAP_IRSELECT, TAP_IRCAPTURE,
|
|
TAP_IREXIT1, TAP_IRPAUSE} },
|
|
|
|
/* {TAP_IDLE, TAP_RESET, 4, {TAP_IDLE,
|
|
* TAP_DRSELECT, TAP_IRSELECT, TAP_RESET}}, */
|
|
{TAP_IDLE, TAP_IDLE, 1, {TAP_IDLE} },
|
|
{TAP_IDLE, TAP_DRPAUSE, 5, {TAP_IDLE, TAP_DRSELECT, TAP_DRCAPTURE,
|
|
TAP_DREXIT1, TAP_DRPAUSE} },
|
|
{TAP_IDLE, TAP_IRPAUSE, 6, {TAP_IDLE, TAP_DRSELECT, TAP_IRSELECT,
|
|
TAP_IRCAPTURE, TAP_IREXIT1, TAP_IRPAUSE} },
|
|
|
|
/* {TAP_DRPAUSE, TAP_RESET, 6, {TAP_DRPAUSE,
|
|
* TAP_DREXIT2, TAP_DRUPDATE, TAP_DRSELECT, TAP_IRSELECT, TAP_RESET}}, */
|
|
{TAP_DRPAUSE, TAP_IDLE, 4, {TAP_DRPAUSE, TAP_DREXIT2, TAP_DRUPDATE,
|
|
TAP_IDLE} },
|
|
{TAP_DRPAUSE, TAP_DRPAUSE, 7, {TAP_DRPAUSE, TAP_DREXIT2, TAP_DRUPDATE,
|
|
TAP_DRSELECT, TAP_DRCAPTURE,
|
|
TAP_DREXIT1, TAP_DRPAUSE} },
|
|
{TAP_DRPAUSE, TAP_IRPAUSE, 8, {TAP_DRPAUSE, TAP_DREXIT2, TAP_DRUPDATE,
|
|
TAP_DRSELECT, TAP_IRSELECT,
|
|
TAP_IRCAPTURE, TAP_IREXIT1, TAP_IRPAUSE} },
|
|
|
|
/* {TAP_IRPAUSE, TAP_RESET, 6, {TAP_IRPAUSE,
|
|
* TAP_IREXIT2, TAP_IRUPDATE, TAP_DRSELECT, TAP_IRSELECT, TAP_RESET}}, */
|
|
{TAP_IRPAUSE, TAP_IDLE, 4, {TAP_IRPAUSE, TAP_IREXIT2, TAP_IRUPDATE,
|
|
TAP_IDLE} },
|
|
{TAP_IRPAUSE, TAP_DRPAUSE, 7, {TAP_IRPAUSE, TAP_IREXIT2, TAP_IRUPDATE,
|
|
TAP_DRSELECT, TAP_DRCAPTURE,
|
|
TAP_DREXIT1, TAP_DRPAUSE} },
|
|
{TAP_IRPAUSE, TAP_IRPAUSE, 8, {TAP_IRPAUSE, TAP_IREXIT2, TAP_IRUPDATE,
|
|
TAP_DRSELECT, TAP_IRSELECT,
|
|
TAP_IRCAPTURE, TAP_IREXIT1, TAP_IRPAUSE} }
|
|
};
|
|
|
|
#define XXR_TDI (1 << 0)
|
|
#define XXR_TDO (1 << 1)
|
|
#define XXR_MASK (1 << 2)
|
|
#define XXR_SMASK (1 << 3)
|
|
struct svf_xxr_para {
|
|
int len;
|
|
int data_mask;
|
|
uint8_t *tdi;
|
|
uint8_t *tdo;
|
|
uint8_t *mask;
|
|
uint8_t *smask;
|
|
};
|
|
|
|
struct svf_para {
|
|
float frequency;
|
|
tap_state_t ir_end_state;
|
|
tap_state_t dr_end_state;
|
|
tap_state_t runtest_run_state;
|
|
tap_state_t runtest_end_state;
|
|
enum trst_mode trst_mode;
|
|
|
|
struct svf_xxr_para hir_para;
|
|
struct svf_xxr_para hdr_para;
|
|
struct svf_xxr_para tir_para;
|
|
struct svf_xxr_para tdr_para;
|
|
struct svf_xxr_para sir_para;
|
|
struct svf_xxr_para sdr_para;
|
|
};
|
|
|
|
static struct svf_para svf_para;
|
|
static const struct svf_para svf_para_init = {
|
|
/* frequency, ir_end_state, dr_end_state, runtest_run_state, runtest_end_state, trst_mode */
|
|
0, TAP_IDLE, TAP_IDLE, TAP_IDLE, TAP_IDLE, TRST_Z,
|
|
/* hir_para */
|
|
/* {len, data_mask, tdi, tdo, mask, smask}, */
|
|
{0, 0, NULL, NULL, NULL, NULL},
|
|
/* hdr_para */
|
|
/* {len, data_mask, tdi, tdo, mask, smask}, */
|
|
{0, 0, NULL, NULL, NULL, NULL},
|
|
/* tir_para */
|
|
/* {len, data_mask, tdi, tdo, mask, smask}, */
|
|
{0, 0, NULL, NULL, NULL, NULL},
|
|
/* tdr_para */
|
|
/* {len, data_mask, tdi, tdo, mask, smask}, */
|
|
{0, 0, NULL, NULL, NULL, NULL},
|
|
/* sir_para */
|
|
/* {len, data_mask, tdi, tdo, mask, smask}, */
|
|
{0, 0, NULL, NULL, NULL, NULL},
|
|
/* sdr_para */
|
|
/* {len, data_mask, tdi, tdo, mask, smask}, */
|
|
{0, 0, NULL, NULL, NULL, NULL},
|
|
};
|
|
|
|
struct svf_check_tdo_para {
|
|
int line_num; /* used to record line number of the check operation */
|
|
/* so more information could be printed */
|
|
int enabled; /* check is enabled or not */
|
|
int buffer_offset; /* buffer_offset to buffers */
|
|
int bit_len; /* bit length to check */
|
|
};
|
|
|
|
#define SVF_CHECK_TDO_PARA_SIZE 1024
|
|
static struct svf_check_tdo_para *svf_check_tdo_para;
|
|
static int svf_check_tdo_para_index;
|
|
|
|
static int svf_read_command_from_file(FILE *fd);
|
|
static int svf_check_tdo(void);
|
|
static int svf_add_check_para(uint8_t enabled, int buffer_offset, int bit_len);
|
|
static int svf_run_command(struct command_context *cmd_ctx, char *cmd_str);
|
|
static int svf_execute_tap(void);
|
|
|
|
static FILE *svf_fd;
|
|
static char *svf_read_line;
|
|
static size_t svf_read_line_size;
|
|
static char *svf_command_buffer;
|
|
static size_t svf_command_buffer_size;
|
|
static int svf_line_number;
|
|
static int svf_getline(char **lineptr, size_t *n, FILE *stream);
|
|
|
|
#define SVF_MAX_BUFFER_SIZE_TO_COMMIT (1024 * 1024)
|
|
static uint8_t *svf_tdi_buffer, *svf_tdo_buffer, *svf_mask_buffer;
|
|
static int svf_buffer_index, svf_buffer_size;
|
|
static int svf_quiet;
|
|
static int svf_nil;
|
|
static int svf_ignore_error;
|
|
|
|
/* Targeting particular tap */
|
|
static int svf_tap_is_specified;
|
|
static int svf_set_padding(struct svf_xxr_para *para, int len, unsigned char tdi);
|
|
|
|
/* Progress Indicator */
|
|
static int svf_progress_enabled;
|
|
static long svf_total_lines;
|
|
static int svf_percentage;
|
|
static int svf_last_printed_percentage = -1;
|
|
|
|
/*
|
|
* macro is used to print the svf hex buffer at desired debug level
|
|
* DEBUG, INFO, ERROR, USER
|
|
*/
|
|
#define SVF_BUF_LOG(_lvl, _buf, _nbits, _desc) \
|
|
svf_hexbuf_print(LOG_LVL_##_lvl, __FILE__, __LINE__, __func__, _buf, _nbits, _desc)
|
|
|
|
static void svf_hexbuf_print(int dbg_lvl, const char *file, unsigned line,
|
|
const char *function, const uint8_t *buf,
|
|
int bit_len, const char *desc)
|
|
{
|
|
int j, len = 0;
|
|
int byte_len = DIV_ROUND_UP(bit_len, 8);
|
|
int msbits = bit_len % 8;
|
|
|
|
/* allocate 2 bytes per hex digit */
|
|
char *prbuf = malloc((byte_len * 2) + 2 + 1);
|
|
if (!prbuf)
|
|
return;
|
|
|
|
/* print correct number of bytes, mask excess bits where applicable */
|
|
uint8_t msb = buf[byte_len - 1] & (msbits ? (1 << msbits) - 1 : 0xff);
|
|
len = sprintf(prbuf, msbits <= 4 ? "0x%01"PRIx8 : "0x%02"PRIx8, msb);
|
|
for (j = byte_len - 2; j >= 0; j--)
|
|
len += sprintf(prbuf + len, "%02"PRIx8, buf[j]);
|
|
|
|
log_printf_lf(dbg_lvl, file, line, function, "%8s = %s", desc ? desc : " ", prbuf);
|
|
|
|
free(prbuf);
|
|
}
|
|
|
|
static int svf_realloc_buffers(size_t len)
|
|
{
|
|
void *ptr;
|
|
|
|
if (svf_execute_tap() != ERROR_OK)
|
|
return ERROR_FAIL;
|
|
|
|
ptr = realloc(svf_tdi_buffer, len);
|
|
if (!ptr)
|
|
return ERROR_FAIL;
|
|
svf_tdi_buffer = ptr;
|
|
|
|
ptr = realloc(svf_tdo_buffer, len);
|
|
if (!ptr)
|
|
return ERROR_FAIL;
|
|
svf_tdo_buffer = ptr;
|
|
|
|
ptr = realloc(svf_mask_buffer, len);
|
|
if (!ptr)
|
|
return ERROR_FAIL;
|
|
svf_mask_buffer = ptr;
|
|
|
|
svf_buffer_size = len;
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static void svf_free_xxd_para(struct svf_xxr_para *para)
|
|
{
|
|
if (para) {
|
|
free(para->tdi);
|
|
para->tdi = NULL;
|
|
|
|
free(para->tdo);
|
|
para->tdo = NULL;
|
|
|
|
free(para->mask);
|
|
para->mask = NULL;
|
|
|
|
free(para->smask);
|
|
para->smask = NULL;
|
|
}
|
|
}
|
|
|
|
int svf_add_statemove(tap_state_t state_to)
|
|
{
|
|
tap_state_t state_from = cmd_queue_cur_state;
|
|
unsigned index_var;
|
|
|
|
/* when resetting, be paranoid and ignore current state */
|
|
if (state_to == TAP_RESET) {
|
|
if (svf_nil)
|
|
return ERROR_OK;
|
|
|
|
jtag_add_tlr();
|
|
return ERROR_OK;
|
|
}
|
|
|
|
for (index_var = 0; index_var < ARRAY_SIZE(svf_statemoves); index_var++) {
|
|
if ((svf_statemoves[index_var].from == state_from)
|
|
&& (svf_statemoves[index_var].to == state_to)) {
|
|
if (svf_nil)
|
|
continue;
|
|
/* recorded path includes current state ... avoid
|
|
*extra TCKs! */
|
|
if (svf_statemoves[index_var].num_of_moves > 1)
|
|
jtag_add_pathmove(svf_statemoves[index_var].num_of_moves - 1,
|
|
svf_statemoves[index_var].paths + 1);
|
|
else
|
|
jtag_add_pathmove(svf_statemoves[index_var].num_of_moves,
|
|
svf_statemoves[index_var].paths);
|
|
return ERROR_OK;
|
|
}
|
|
}
|
|
LOG_ERROR("SVF: can not move to %s", tap_state_name(state_to));
|
|
return ERROR_FAIL;
|
|
}
|
|
|
|
COMMAND_HANDLER(handle_svf_command)
|
|
{
|
|
#define SVF_MIN_NUM_OF_OPTIONS 1
|
|
#define SVF_MAX_NUM_OF_OPTIONS 5
|
|
int command_num = 0;
|
|
int ret = ERROR_OK;
|
|
int64_t time_measure_ms;
|
|
int time_measure_s, time_measure_m;
|
|
|
|
/* use NULL to indicate a "plain" svf file which accounts for
|
|
* any additional devices in the scan chain, otherwise the device
|
|
* that should be affected
|
|
*/
|
|
struct jtag_tap *tap = NULL;
|
|
|
|
if ((CMD_ARGC < SVF_MIN_NUM_OF_OPTIONS) || (CMD_ARGC > SVF_MAX_NUM_OF_OPTIONS))
|
|
return ERROR_COMMAND_SYNTAX_ERROR;
|
|
|
|
/* parse command line */
|
|
svf_quiet = 0;
|
|
svf_nil = 0;
|
|
svf_progress_enabled = 0;
|
|
svf_ignore_error = 0;
|
|
for (unsigned int i = 0; i < CMD_ARGC; i++) {
|
|
if (strcmp(CMD_ARGV[i], "-tap") == 0) {
|
|
tap = jtag_tap_by_string(CMD_ARGV[i+1]);
|
|
if (!tap) {
|
|
command_print(CMD, "Tap: %s unknown", CMD_ARGV[i+1]);
|
|
return ERROR_FAIL;
|
|
}
|
|
i++;
|
|
} else if ((strcmp(CMD_ARGV[i],
|
|
"quiet") == 0) || (strcmp(CMD_ARGV[i], "-quiet") == 0))
|
|
svf_quiet = 1;
|
|
else if ((strcmp(CMD_ARGV[i], "nil") == 0) || (strcmp(CMD_ARGV[i], "-nil") == 0))
|
|
svf_nil = 1;
|
|
else if ((strcmp(CMD_ARGV[i],
|
|
"progress") == 0) || (strcmp(CMD_ARGV[i], "-progress") == 0))
|
|
svf_progress_enabled = 1;
|
|
else if ((strcmp(CMD_ARGV[i],
|
|
"ignore_error") == 0) || (strcmp(CMD_ARGV[i], "-ignore_error") == 0))
|
|
svf_ignore_error = 1;
|
|
else {
|
|
svf_fd = fopen(CMD_ARGV[i], "r");
|
|
if (!svf_fd) {
|
|
int err = errno;
|
|
command_print(CMD, "open(\"%s\"): %s", CMD_ARGV[i], strerror(err));
|
|
/* no need to free anything now */
|
|
return ERROR_COMMAND_SYNTAX_ERROR;
|
|
} else
|
|
LOG_USER("svf processing file: \"%s\"", CMD_ARGV[i]);
|
|
}
|
|
}
|
|
|
|
if (!svf_fd)
|
|
return ERROR_COMMAND_SYNTAX_ERROR;
|
|
|
|
/* get time */
|
|
time_measure_ms = timeval_ms();
|
|
|
|
/* init */
|
|
svf_line_number = 0;
|
|
svf_command_buffer_size = 0;
|
|
|
|
svf_check_tdo_para_index = 0;
|
|
svf_check_tdo_para = malloc(sizeof(struct svf_check_tdo_para) * SVF_CHECK_TDO_PARA_SIZE);
|
|
if (!svf_check_tdo_para) {
|
|
LOG_ERROR("not enough memory");
|
|
ret = ERROR_FAIL;
|
|
goto free_all;
|
|
}
|
|
|
|
svf_buffer_index = 0;
|
|
/* double the buffer size */
|
|
/* in case current command cannot be committed, and next command is a bit scan command */
|
|
/* here is 32K bits for this big scan command, it should be enough */
|
|
/* buffer will be reallocated if buffer size is not enough */
|
|
if (svf_realloc_buffers(2 * SVF_MAX_BUFFER_SIZE_TO_COMMIT) != ERROR_OK) {
|
|
ret = ERROR_FAIL;
|
|
goto free_all;
|
|
}
|
|
|
|
memcpy(&svf_para, &svf_para_init, sizeof(svf_para));
|
|
|
|
if (!svf_nil) {
|
|
/* TAP_RESET */
|
|
jtag_add_tlr();
|
|
}
|
|
|
|
if (tap) {
|
|
/* Tap is specified, set header/trailer paddings */
|
|
int header_ir_len = 0, header_dr_len = 0, trailer_ir_len = 0, trailer_dr_len = 0;
|
|
struct jtag_tap *check_tap;
|
|
|
|
svf_tap_is_specified = 1;
|
|
|
|
for (check_tap = jtag_all_taps(); check_tap; check_tap = check_tap->next_tap) {
|
|
if (check_tap->abs_chain_position < tap->abs_chain_position) {
|
|
/* Header */
|
|
header_ir_len += check_tap->ir_length;
|
|
header_dr_len++;
|
|
} else if (check_tap->abs_chain_position > tap->abs_chain_position) {
|
|
/* Trailer */
|
|
trailer_ir_len += check_tap->ir_length;
|
|
trailer_dr_len++;
|
|
}
|
|
}
|
|
|
|
/* HDR %d TDI (0) */
|
|
if (svf_set_padding(&svf_para.hdr_para, header_dr_len, 0) != ERROR_OK) {
|
|
LOG_ERROR("failed to set data header");
|
|
return ERROR_FAIL;
|
|
}
|
|
|
|
/* HIR %d TDI (0xFF) */
|
|
if (svf_set_padding(&svf_para.hir_para, header_ir_len, 0xFF) != ERROR_OK) {
|
|
LOG_ERROR("failed to set instruction header");
|
|
return ERROR_FAIL;
|
|
}
|
|
|
|
/* TDR %d TDI (0) */
|
|
if (svf_set_padding(&svf_para.tdr_para, trailer_dr_len, 0) != ERROR_OK) {
|
|
LOG_ERROR("failed to set data trailer");
|
|
return ERROR_FAIL;
|
|
}
|
|
|
|
/* TIR %d TDI (0xFF) */
|
|
if (svf_set_padding(&svf_para.tir_para, trailer_ir_len, 0xFF) != ERROR_OK) {
|
|
LOG_ERROR("failed to set instruction trailer");
|
|
return ERROR_FAIL;
|
|
}
|
|
}
|
|
|
|
if (svf_progress_enabled) {
|
|
/* Count total lines in file. */
|
|
while (!feof(svf_fd)) {
|
|
svf_getline(&svf_command_buffer, &svf_command_buffer_size, svf_fd);
|
|
svf_total_lines++;
|
|
}
|
|
rewind(svf_fd);
|
|
}
|
|
while (svf_read_command_from_file(svf_fd) == ERROR_OK) {
|
|
/* Log Output */
|
|
if (svf_quiet) {
|
|
if (svf_progress_enabled) {
|
|
svf_percentage = ((svf_line_number * 20) / svf_total_lines) * 5;
|
|
if (svf_last_printed_percentage != svf_percentage) {
|
|
LOG_USER_N("\r%d%% ", svf_percentage);
|
|
svf_last_printed_percentage = svf_percentage;
|
|
}
|
|
}
|
|
} else {
|
|
if (svf_progress_enabled) {
|
|
svf_percentage = ((svf_line_number * 20) / svf_total_lines) * 5;
|
|
LOG_USER_N("%3d%% %s", svf_percentage, svf_read_line);
|
|
} else
|
|
LOG_USER_N("%s", svf_read_line);
|
|
}
|
|
/* Run Command */
|
|
if (svf_run_command(CMD_CTX, svf_command_buffer) != ERROR_OK) {
|
|
LOG_ERROR("fail to run command at line %d", svf_line_number);
|
|
ret = ERROR_FAIL;
|
|
break;
|
|
}
|
|
command_num++;
|
|
}
|
|
|
|
if ((!svf_nil) && (jtag_execute_queue() != ERROR_OK))
|
|
ret = ERROR_FAIL;
|
|
else if (svf_check_tdo() != ERROR_OK)
|
|
ret = ERROR_FAIL;
|
|
|
|
/* print time */
|
|
time_measure_ms = timeval_ms() - time_measure_ms;
|
|
time_measure_s = time_measure_ms / 1000;
|
|
time_measure_ms %= 1000;
|
|
time_measure_m = time_measure_s / 60;
|
|
time_measure_s %= 60;
|
|
if (time_measure_ms < 1000)
|
|
command_print(CMD,
|
|
"\r\nTime used: %dm%ds%" PRId64 "ms ",
|
|
time_measure_m,
|
|
time_measure_s,
|
|
time_measure_ms);
|
|
|
|
free_all:
|
|
|
|
fclose(svf_fd);
|
|
svf_fd = 0;
|
|
|
|
/* free buffers */
|
|
free(svf_command_buffer);
|
|
svf_command_buffer = NULL;
|
|
svf_command_buffer_size = 0;
|
|
|
|
free(svf_check_tdo_para);
|
|
svf_check_tdo_para = NULL;
|
|
svf_check_tdo_para_index = 0;
|
|
|
|
free(svf_tdi_buffer);
|
|
svf_tdi_buffer = NULL;
|
|
|
|
free(svf_tdo_buffer);
|
|
svf_tdo_buffer = NULL;
|
|
|
|
free(svf_mask_buffer);
|
|
svf_mask_buffer = NULL;
|
|
|
|
svf_buffer_index = 0;
|
|
svf_buffer_size = 0;
|
|
|
|
svf_free_xxd_para(&svf_para.hdr_para);
|
|
svf_free_xxd_para(&svf_para.hir_para);
|
|
svf_free_xxd_para(&svf_para.tdr_para);
|
|
svf_free_xxd_para(&svf_para.tir_para);
|
|
svf_free_xxd_para(&svf_para.sdr_para);
|
|
svf_free_xxd_para(&svf_para.sir_para);
|
|
|
|
if (ret == ERROR_OK)
|
|
command_print(CMD,
|
|
"svf file programmed %s for %d commands with %d errors",
|
|
(svf_ignore_error > 1) ? "unsuccessfully" : "successfully",
|
|
command_num,
|
|
(svf_ignore_error > 1) ? (svf_ignore_error - 1) : 0);
|
|
else
|
|
command_print(CMD, "svf file programmed failed");
|
|
|
|
svf_ignore_error = 0;
|
|
return ret;
|
|
}
|
|
|
|
static int svf_getline(char **lineptr, size_t *n, FILE *stream)
|
|
{
|
|
#define MIN_CHUNK 16 /* Buffer is increased by this size each time as required */
|
|
size_t i = 0;
|
|
|
|
if (!*lineptr) {
|
|
*n = MIN_CHUNK;
|
|
*lineptr = malloc(*n);
|
|
if (!*lineptr)
|
|
return -1;
|
|
}
|
|
|
|
(*lineptr)[0] = fgetc(stream);
|
|
while ((*lineptr)[i] != '\n') {
|
|
(*lineptr)[++i] = fgetc(stream);
|
|
if (feof(stream)) {
|
|
(*lineptr)[0] = 0;
|
|
return -1;
|
|
}
|
|
if ((i + 2) > *n) {
|
|
*n += MIN_CHUNK;
|
|
*lineptr = realloc(*lineptr, *n);
|
|
}
|
|
}
|
|
|
|
(*lineptr)[++i] = 0;
|
|
|
|
return sizeof(*lineptr);
|
|
}
|
|
|
|
#define SVFP_CMD_INC_CNT 1024
|
|
static int svf_read_command_from_file(FILE *fd)
|
|
{
|
|
unsigned char ch;
|
|
int i = 0;
|
|
size_t cmd_pos = 0;
|
|
int cmd_ok = 0, slash = 0;
|
|
|
|
if (svf_getline(&svf_read_line, &svf_read_line_size, svf_fd) <= 0)
|
|
return ERROR_FAIL;
|
|
svf_line_number++;
|
|
ch = svf_read_line[0];
|
|
while (!cmd_ok && (ch != 0)) {
|
|
switch (ch) {
|
|
case '!':
|
|
slash = 0;
|
|
if (svf_getline(&svf_read_line, &svf_read_line_size, svf_fd) <= 0)
|
|
return ERROR_FAIL;
|
|
svf_line_number++;
|
|
i = -1;
|
|
break;
|
|
case '/':
|
|
if (++slash == 2) {
|
|
slash = 0;
|
|
if (svf_getline(&svf_read_line, &svf_read_line_size,
|
|
svf_fd) <= 0)
|
|
return ERROR_FAIL;
|
|
svf_line_number++;
|
|
i = -1;
|
|
}
|
|
break;
|
|
case ';':
|
|
slash = 0;
|
|
cmd_ok = 1;
|
|
break;
|
|
case '\n':
|
|
svf_line_number++;
|
|
if (svf_getline(&svf_read_line, &svf_read_line_size, svf_fd) <= 0)
|
|
return ERROR_FAIL;
|
|
i = -1;
|
|
/* fallthrough */
|
|
case '\r':
|
|
slash = 0;
|
|
/* Don't save '\r' and '\n' if no data is parsed */
|
|
if (!cmd_pos)
|
|
break;
|
|
/* fallthrough */
|
|
default:
|
|
/* The parsing code currently expects a space
|
|
* before parentheses -- "TDI (123)". Also a
|
|
* space afterwards -- "TDI (123) TDO(456)".
|
|
* But such spaces are optional... instead of
|
|
* parser updates, cope with that by adding the
|
|
* spaces as needed.
|
|
*
|
|
* Ensure there are 3 bytes available, for:
|
|
* - current character
|
|
* - added space.
|
|
* - terminating NUL ('\0')
|
|
*/
|
|
if (cmd_pos + 3 > svf_command_buffer_size) {
|
|
svf_command_buffer = realloc(svf_command_buffer, cmd_pos + 3);
|
|
svf_command_buffer_size = cmd_pos + 3;
|
|
if (!svf_command_buffer) {
|
|
LOG_ERROR("not enough memory");
|
|
return ERROR_FAIL;
|
|
}
|
|
}
|
|
|
|
/* insert a space before '(' */
|
|
if ('(' == ch)
|
|
svf_command_buffer[cmd_pos++] = ' ';
|
|
|
|
svf_command_buffer[cmd_pos++] = (char)toupper(ch);
|
|
|
|
/* insert a space after ')' */
|
|
if (')' == ch)
|
|
svf_command_buffer[cmd_pos++] = ' ';
|
|
break;
|
|
}
|
|
ch = svf_read_line[++i];
|
|
}
|
|
|
|
if (cmd_ok) {
|
|
svf_command_buffer[cmd_pos] = '\0';
|
|
return ERROR_OK;
|
|
} else
|
|
return ERROR_FAIL;
|
|
}
|
|
|
|
static int svf_parse_cmd_string(char *str, int len, char **argus, int *num_of_argu)
|
|
{
|
|
int pos = 0, num = 0, space_found = 1, in_bracket = 0;
|
|
|
|
while (pos < len) {
|
|
switch (str[pos]) {
|
|
case '!':
|
|
case '/':
|
|
LOG_ERROR("fail to parse svf command");
|
|
return ERROR_FAIL;
|
|
case '(':
|
|
in_bracket = 1;
|
|
goto parse_char;
|
|
case ')':
|
|
in_bracket = 0;
|
|
goto parse_char;
|
|
default:
|
|
parse_char:
|
|
if (!in_bracket && isspace((int) str[pos])) {
|
|
space_found = 1;
|
|
str[pos] = '\0';
|
|
} else if (space_found) {
|
|
argus[num++] = &str[pos];
|
|
space_found = 0;
|
|
}
|
|
break;
|
|
}
|
|
pos++;
|
|
}
|
|
|
|
if (num == 0)
|
|
return ERROR_FAIL;
|
|
|
|
*num_of_argu = num;
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
bool svf_tap_state_is_stable(tap_state_t state)
|
|
{
|
|
return (state == TAP_RESET) || (state == TAP_IDLE)
|
|
|| (state == TAP_DRPAUSE) || (state == TAP_IRPAUSE);
|
|
}
|
|
|
|
static int svf_find_string_in_array(char *str, char **strs, int num_of_element)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < num_of_element; i++) {
|
|
if (!strcmp(str, strs[i]))
|
|
return i;
|
|
}
|
|
return 0xFF;
|
|
}
|
|
|
|
static int svf_adjust_array_length(uint8_t **arr, int orig_bit_len, int new_bit_len)
|
|
{
|
|
int new_byte_len = (new_bit_len + 7) >> 3;
|
|
|
|
if ((!*arr) || (((orig_bit_len + 7) >> 3) < ((new_bit_len + 7) >> 3))) {
|
|
free(*arr);
|
|
*arr = calloc(1, new_byte_len);
|
|
if (!*arr) {
|
|
LOG_ERROR("not enough memory");
|
|
return ERROR_FAIL;
|
|
}
|
|
}
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int svf_set_padding(struct svf_xxr_para *para, int len, unsigned char tdi)
|
|
{
|
|
int error = ERROR_OK;
|
|
error |= svf_adjust_array_length(¶->tdi, para->len, len);
|
|
memset(para->tdi, tdi, (len + 7) >> 3);
|
|
error |= svf_adjust_array_length(¶->tdo, para->len, len);
|
|
error |= svf_adjust_array_length(¶->mask, para->len, len);
|
|
para->len = len;
|
|
para->data_mask = XXR_TDI;
|
|
|
|
return error;
|
|
}
|
|
|
|
static int svf_copy_hexstring_to_binary(char *str, uint8_t **bin, int orig_bit_len, int bit_len)
|
|
{
|
|
int i, str_len = strlen(str), str_hbyte_len = (bit_len + 3) >> 2;
|
|
uint8_t ch = 0;
|
|
|
|
if (svf_adjust_array_length(bin, orig_bit_len, bit_len) != ERROR_OK) {
|
|
LOG_ERROR("fail to adjust length of array");
|
|
return ERROR_FAIL;
|
|
}
|
|
|
|
/* fill from LSB (end of str) to MSB (beginning of str) */
|
|
for (i = 0; i < str_hbyte_len; i++) {
|
|
ch = 0;
|
|
while (str_len > 0) {
|
|
ch = str[--str_len];
|
|
|
|
/* Skip whitespace. The SVF specification (rev E) is
|
|
* deficient in terms of basic lexical issues like
|
|
* where whitespace is allowed. Long bitstrings may
|
|
* require line ends for correctness, since there is
|
|
* a hard limit on line length.
|
|
*/
|
|
if (!isspace(ch)) {
|
|
if ((ch >= '0') && (ch <= '9')) {
|
|
ch = ch - '0';
|
|
break;
|
|
} else if ((ch >= 'A') && (ch <= 'F')) {
|
|
ch = ch - 'A' + 10;
|
|
break;
|
|
} else {
|
|
LOG_ERROR("invalid hex string");
|
|
return ERROR_FAIL;
|
|
}
|
|
}
|
|
|
|
ch = 0;
|
|
}
|
|
|
|
/* write bin */
|
|
if (i % 2) {
|
|
/* MSB */
|
|
(*bin)[i / 2] |= ch << 4;
|
|
} else {
|
|
/* LSB */
|
|
(*bin)[i / 2] = 0;
|
|
(*bin)[i / 2] |= ch;
|
|
}
|
|
}
|
|
|
|
/* consume optional leading '0' MSBs or whitespace */
|
|
while (str_len > 0 && ((str[str_len - 1] == '0')
|
|
|| isspace((int) str[str_len - 1])))
|
|
str_len--;
|
|
|
|
/* check validity: we must have consumed everything */
|
|
if (str_len > 0 || (ch & ~((2 << ((bit_len - 1) % 4)) - 1)) != 0) {
|
|
LOG_ERROR("value exceeds length");
|
|
return ERROR_FAIL;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int svf_check_tdo(void)
|
|
{
|
|
int i, len, index_var;
|
|
|
|
for (i = 0; i < svf_check_tdo_para_index; i++) {
|
|
index_var = svf_check_tdo_para[i].buffer_offset;
|
|
len = svf_check_tdo_para[i].bit_len;
|
|
if ((svf_check_tdo_para[i].enabled)
|
|
&& buf_cmp_mask(&svf_tdi_buffer[index_var], &svf_tdo_buffer[index_var],
|
|
&svf_mask_buffer[index_var], len)) {
|
|
LOG_ERROR("tdo check error at line %d",
|
|
svf_check_tdo_para[i].line_num);
|
|
SVF_BUF_LOG(ERROR, &svf_tdi_buffer[index_var], len, "READ");
|
|
SVF_BUF_LOG(ERROR, &svf_tdo_buffer[index_var], len, "WANT");
|
|
SVF_BUF_LOG(ERROR, &svf_mask_buffer[index_var], len, "MASK");
|
|
|
|
if (svf_ignore_error == 0)
|
|
return ERROR_FAIL;
|
|
else
|
|
svf_ignore_error++;
|
|
}
|
|
}
|
|
svf_check_tdo_para_index = 0;
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int svf_add_check_para(uint8_t enabled, int buffer_offset, int bit_len)
|
|
{
|
|
if (svf_check_tdo_para_index >= SVF_CHECK_TDO_PARA_SIZE) {
|
|
LOG_ERROR("toooooo many operation undone");
|
|
return ERROR_FAIL;
|
|
}
|
|
|
|
svf_check_tdo_para[svf_check_tdo_para_index].line_num = svf_line_number;
|
|
svf_check_tdo_para[svf_check_tdo_para_index].bit_len = bit_len;
|
|
svf_check_tdo_para[svf_check_tdo_para_index].enabled = enabled;
|
|
svf_check_tdo_para[svf_check_tdo_para_index].buffer_offset = buffer_offset;
|
|
svf_check_tdo_para_index++;
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int svf_execute_tap(void)
|
|
{
|
|
if ((!svf_nil) && (jtag_execute_queue() != ERROR_OK))
|
|
return ERROR_FAIL;
|
|
else if (svf_check_tdo() != ERROR_OK)
|
|
return ERROR_FAIL;
|
|
|
|
svf_buffer_index = 0;
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int svf_run_command(struct command_context *cmd_ctx, char *cmd_str)
|
|
{
|
|
char *argus[256], command;
|
|
int num_of_argu = 0, i;
|
|
|
|
/* tmp variable */
|
|
int i_tmp;
|
|
|
|
/* for RUNTEST */
|
|
int run_count;
|
|
float min_time;
|
|
/* for XXR */
|
|
struct svf_xxr_para *xxr_para_tmp;
|
|
uint8_t **pbuffer_tmp;
|
|
struct scan_field field;
|
|
/* for STATE */
|
|
tap_state_t *path = NULL, state;
|
|
/* flag padding commands skipped due to -tap command */
|
|
int padding_command_skipped = 0;
|
|
|
|
if (svf_parse_cmd_string(cmd_str, strlen(cmd_str), argus, &num_of_argu) != ERROR_OK)
|
|
return ERROR_FAIL;
|
|
|
|
/* NOTE: we're a bit loose here, because we ignore case in
|
|
* TAP state names (instead of insisting on uppercase).
|
|
*/
|
|
|
|
command = svf_find_string_in_array(argus[0],
|
|
(char **)svf_command_name, ARRAY_SIZE(svf_command_name));
|
|
switch (command) {
|
|
case ENDDR:
|
|
case ENDIR:
|
|
if (num_of_argu != 2) {
|
|
LOG_ERROR("invalid parameter of %s", argus[0]);
|
|
return ERROR_FAIL;
|
|
}
|
|
|
|
i_tmp = tap_state_by_name(argus[1]);
|
|
|
|
if (svf_tap_state_is_stable(i_tmp)) {
|
|
if (command == ENDIR) {
|
|
svf_para.ir_end_state = i_tmp;
|
|
LOG_DEBUG("\tIR end_state = %s",
|
|
tap_state_name(i_tmp));
|
|
} else {
|
|
svf_para.dr_end_state = i_tmp;
|
|
LOG_DEBUG("\tDR end_state = %s",
|
|
tap_state_name(i_tmp));
|
|
}
|
|
} else {
|
|
LOG_ERROR("%s: %s is not a stable state",
|
|
argus[0], argus[1]);
|
|
return ERROR_FAIL;
|
|
}
|
|
break;
|
|
case FREQUENCY:
|
|
if ((num_of_argu != 1) && (num_of_argu != 3)) {
|
|
LOG_ERROR("invalid parameter of %s", argus[0]);
|
|
return ERROR_FAIL;
|
|
}
|
|
if (num_of_argu == 1) {
|
|
/* TODO: set jtag speed to full speed */
|
|
svf_para.frequency = 0;
|
|
} else {
|
|
if (strcmp(argus[2], "HZ")) {
|
|
LOG_ERROR("HZ not found in FREQUENCY command");
|
|
return ERROR_FAIL;
|
|
}
|
|
if (svf_execute_tap() != ERROR_OK)
|
|
return ERROR_FAIL;
|
|
svf_para.frequency = atof(argus[1]);
|
|
/* TODO: set jtag speed to */
|
|
if (svf_para.frequency > 0) {
|
|
command_run_linef(cmd_ctx,
|
|
"adapter speed %d",
|
|
(int)svf_para.frequency / 1000);
|
|
LOG_DEBUG("\tfrequency = %f", svf_para.frequency);
|
|
}
|
|
}
|
|
break;
|
|
case HDR:
|
|
if (svf_tap_is_specified) {
|
|
padding_command_skipped = 1;
|
|
break;
|
|
}
|
|
xxr_para_tmp = &svf_para.hdr_para;
|
|
goto xxr_common;
|
|
case HIR:
|
|
if (svf_tap_is_specified) {
|
|
padding_command_skipped = 1;
|
|
break;
|
|
}
|
|
xxr_para_tmp = &svf_para.hir_para;
|
|
goto xxr_common;
|
|
case TDR:
|
|
if (svf_tap_is_specified) {
|
|
padding_command_skipped = 1;
|
|
break;
|
|
}
|
|
xxr_para_tmp = &svf_para.tdr_para;
|
|
goto xxr_common;
|
|
case TIR:
|
|
if (svf_tap_is_specified) {
|
|
padding_command_skipped = 1;
|
|
break;
|
|
}
|
|
xxr_para_tmp = &svf_para.tir_para;
|
|
goto xxr_common;
|
|
case SDR:
|
|
xxr_para_tmp = &svf_para.sdr_para;
|
|
goto xxr_common;
|
|
case SIR:
|
|
xxr_para_tmp = &svf_para.sir_para;
|
|
goto xxr_common;
|
|
xxr_common:
|
|
/* XXR length [TDI (tdi)] [TDO (tdo)][MASK (mask)] [SMASK (smask)] */
|
|
if ((num_of_argu > 10) || (num_of_argu % 2)) {
|
|
LOG_ERROR("invalid parameter of %s", argus[0]);
|
|
return ERROR_FAIL;
|
|
}
|
|
i_tmp = xxr_para_tmp->len;
|
|
xxr_para_tmp->len = atoi(argus[1]);
|
|
/* If we are to enlarge the buffers, all parts of xxr_para_tmp
|
|
* need to be freed */
|
|
if (i_tmp < xxr_para_tmp->len) {
|
|
free(xxr_para_tmp->tdi);
|
|
xxr_para_tmp->tdi = NULL;
|
|
free(xxr_para_tmp->tdo);
|
|
xxr_para_tmp->tdo = NULL;
|
|
free(xxr_para_tmp->mask);
|
|
xxr_para_tmp->mask = NULL;
|
|
free(xxr_para_tmp->smask);
|
|
xxr_para_tmp->smask = NULL;
|
|
}
|
|
|
|
LOG_DEBUG("\tlength = %d", xxr_para_tmp->len);
|
|
xxr_para_tmp->data_mask = 0;
|
|
for (i = 2; i < num_of_argu; i += 2) {
|
|
if ((strlen(argus[i + 1]) < 3) || (argus[i + 1][0] != '(') ||
|
|
(argus[i + 1][strlen(argus[i + 1]) - 1] != ')')) {
|
|
LOG_ERROR("data section error");
|
|
return ERROR_FAIL;
|
|
}
|
|
argus[i + 1][strlen(argus[i + 1]) - 1] = '\0';
|
|
/* TDI, TDO, MASK, SMASK */
|
|
if (!strcmp(argus[i], "TDI")) {
|
|
/* TDI */
|
|
pbuffer_tmp = &xxr_para_tmp->tdi;
|
|
xxr_para_tmp->data_mask |= XXR_TDI;
|
|
} else if (!strcmp(argus[i], "TDO")) {
|
|
/* TDO */
|
|
pbuffer_tmp = &xxr_para_tmp->tdo;
|
|
xxr_para_tmp->data_mask |= XXR_TDO;
|
|
} else if (!strcmp(argus[i], "MASK")) {
|
|
/* MASK */
|
|
pbuffer_tmp = &xxr_para_tmp->mask;
|
|
xxr_para_tmp->data_mask |= XXR_MASK;
|
|
} else if (!strcmp(argus[i], "SMASK")) {
|
|
/* SMASK */
|
|
pbuffer_tmp = &xxr_para_tmp->smask;
|
|
xxr_para_tmp->data_mask |= XXR_SMASK;
|
|
} else {
|
|
LOG_ERROR("unknown parameter: %s", argus[i]);
|
|
return ERROR_FAIL;
|
|
}
|
|
if (ERROR_OK !=
|
|
svf_copy_hexstring_to_binary(&argus[i + 1][1], pbuffer_tmp, i_tmp,
|
|
xxr_para_tmp->len)) {
|
|
LOG_ERROR("fail to parse hex value");
|
|
return ERROR_FAIL;
|
|
}
|
|
SVF_BUF_LOG(DEBUG, *pbuffer_tmp, xxr_para_tmp->len, argus[i]);
|
|
}
|
|
/* If a command changes the length of the last scan of the same type and the
|
|
* MASK parameter is absent, */
|
|
/* the mask pattern used is all cares */
|
|
if (!(xxr_para_tmp->data_mask & XXR_MASK) && (i_tmp != xxr_para_tmp->len)) {
|
|
/* MASK not defined and length changed */
|
|
if (ERROR_OK !=
|
|
svf_adjust_array_length(&xxr_para_tmp->mask, i_tmp,
|
|
xxr_para_tmp->len)) {
|
|
LOG_ERROR("fail to adjust length of array");
|
|
return ERROR_FAIL;
|
|
}
|
|
buf_set_ones(xxr_para_tmp->mask, xxr_para_tmp->len);
|
|
}
|
|
/* If TDO is absent, no comparison is needed, set the mask to 0 */
|
|
if (!(xxr_para_tmp->data_mask & XXR_TDO)) {
|
|
if (!xxr_para_tmp->tdo) {
|
|
if (ERROR_OK !=
|
|
svf_adjust_array_length(&xxr_para_tmp->tdo, i_tmp,
|
|
xxr_para_tmp->len)) {
|
|
LOG_ERROR("fail to adjust length of array");
|
|
return ERROR_FAIL;
|
|
}
|
|
}
|
|
if (!xxr_para_tmp->mask) {
|
|
if (ERROR_OK !=
|
|
svf_adjust_array_length(&xxr_para_tmp->mask, i_tmp,
|
|
xxr_para_tmp->len)) {
|
|
LOG_ERROR("fail to adjust length of array");
|
|
return ERROR_FAIL;
|
|
}
|
|
}
|
|
memset(xxr_para_tmp->mask, 0, (xxr_para_tmp->len + 7) >> 3);
|
|
}
|
|
/* do scan if necessary */
|
|
if (command == SDR) {
|
|
/* check buffer size first, reallocate if necessary */
|
|
i = svf_para.hdr_para.len + svf_para.sdr_para.len +
|
|
svf_para.tdr_para.len;
|
|
if ((svf_buffer_size - svf_buffer_index) < ((i + 7) >> 3)) {
|
|
/* reallocate buffer */
|
|
if (svf_realloc_buffers(svf_buffer_index + ((i + 7) >> 3)) != ERROR_OK) {
|
|
LOG_ERROR("not enough memory");
|
|
return ERROR_FAIL;
|
|
}
|
|
}
|
|
|
|
/* assemble dr data */
|
|
i = 0;
|
|
buf_set_buf(svf_para.hdr_para.tdi,
|
|
0,
|
|
&svf_tdi_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.hdr_para.len);
|
|
i += svf_para.hdr_para.len;
|
|
buf_set_buf(svf_para.sdr_para.tdi,
|
|
0,
|
|
&svf_tdi_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.sdr_para.len);
|
|
i += svf_para.sdr_para.len;
|
|
buf_set_buf(svf_para.tdr_para.tdi,
|
|
0,
|
|
&svf_tdi_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.tdr_para.len);
|
|
i += svf_para.tdr_para.len;
|
|
|
|
/* add check data */
|
|
if (svf_para.sdr_para.data_mask & XXR_TDO) {
|
|
/* assemble dr mask data */
|
|
i = 0;
|
|
buf_set_buf(svf_para.hdr_para.mask,
|
|
0,
|
|
&svf_mask_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.hdr_para.len);
|
|
i += svf_para.hdr_para.len;
|
|
buf_set_buf(svf_para.sdr_para.mask,
|
|
0,
|
|
&svf_mask_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.sdr_para.len);
|
|
i += svf_para.sdr_para.len;
|
|
buf_set_buf(svf_para.tdr_para.mask,
|
|
0,
|
|
&svf_mask_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.tdr_para.len);
|
|
|
|
/* assemble dr check data */
|
|
i = 0;
|
|
buf_set_buf(svf_para.hdr_para.tdo,
|
|
0,
|
|
&svf_tdo_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.hdr_para.len);
|
|
i += svf_para.hdr_para.len;
|
|
buf_set_buf(svf_para.sdr_para.tdo,
|
|
0,
|
|
&svf_tdo_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.sdr_para.len);
|
|
i += svf_para.sdr_para.len;
|
|
buf_set_buf(svf_para.tdr_para.tdo,
|
|
0,
|
|
&svf_tdo_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.tdr_para.len);
|
|
i += svf_para.tdr_para.len;
|
|
|
|
svf_add_check_para(1, svf_buffer_index, i);
|
|
} else
|
|
svf_add_check_para(0, svf_buffer_index, i);
|
|
field.num_bits = i;
|
|
field.out_value = &svf_tdi_buffer[svf_buffer_index];
|
|
field.in_value = (xxr_para_tmp->data_mask & XXR_TDO) ? &svf_tdi_buffer[svf_buffer_index] : NULL;
|
|
if (!svf_nil) {
|
|
/* NOTE: doesn't use SVF-specified state paths */
|
|
jtag_add_plain_dr_scan(field.num_bits,
|
|
field.out_value,
|
|
field.in_value,
|
|
svf_para.dr_end_state);
|
|
}
|
|
|
|
svf_buffer_index += (i + 7) >> 3;
|
|
} else if (command == SIR) {
|
|
/* check buffer size first, reallocate if necessary */
|
|
i = svf_para.hir_para.len + svf_para.sir_para.len +
|
|
svf_para.tir_para.len;
|
|
if ((svf_buffer_size - svf_buffer_index) < ((i + 7) >> 3)) {
|
|
if (svf_realloc_buffers(svf_buffer_index + ((i + 7) >> 3)) != ERROR_OK) {
|
|
LOG_ERROR("not enough memory");
|
|
return ERROR_FAIL;
|
|
}
|
|
}
|
|
|
|
/* assemble ir data */
|
|
i = 0;
|
|
buf_set_buf(svf_para.hir_para.tdi,
|
|
0,
|
|
&svf_tdi_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.hir_para.len);
|
|
i += svf_para.hir_para.len;
|
|
buf_set_buf(svf_para.sir_para.tdi,
|
|
0,
|
|
&svf_tdi_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.sir_para.len);
|
|
i += svf_para.sir_para.len;
|
|
buf_set_buf(svf_para.tir_para.tdi,
|
|
0,
|
|
&svf_tdi_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.tir_para.len);
|
|
i += svf_para.tir_para.len;
|
|
|
|
/* add check data */
|
|
if (svf_para.sir_para.data_mask & XXR_TDO) {
|
|
/* assemble dr mask data */
|
|
i = 0;
|
|
buf_set_buf(svf_para.hir_para.mask,
|
|
0,
|
|
&svf_mask_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.hir_para.len);
|
|
i += svf_para.hir_para.len;
|
|
buf_set_buf(svf_para.sir_para.mask,
|
|
0,
|
|
&svf_mask_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.sir_para.len);
|
|
i += svf_para.sir_para.len;
|
|
buf_set_buf(svf_para.tir_para.mask,
|
|
0,
|
|
&svf_mask_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.tir_para.len);
|
|
|
|
/* assemble dr check data */
|
|
i = 0;
|
|
buf_set_buf(svf_para.hir_para.tdo,
|
|
0,
|
|
&svf_tdo_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.hir_para.len);
|
|
i += svf_para.hir_para.len;
|
|
buf_set_buf(svf_para.sir_para.tdo,
|
|
0,
|
|
&svf_tdo_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.sir_para.len);
|
|
i += svf_para.sir_para.len;
|
|
buf_set_buf(svf_para.tir_para.tdo,
|
|
0,
|
|
&svf_tdo_buffer[svf_buffer_index],
|
|
i,
|
|
svf_para.tir_para.len);
|
|
i += svf_para.tir_para.len;
|
|
|
|
svf_add_check_para(1, svf_buffer_index, i);
|
|
} else
|
|
svf_add_check_para(0, svf_buffer_index, i);
|
|
field.num_bits = i;
|
|
field.out_value = &svf_tdi_buffer[svf_buffer_index];
|
|
field.in_value = (xxr_para_tmp->data_mask & XXR_TDO) ? &svf_tdi_buffer[svf_buffer_index] : NULL;
|
|
if (!svf_nil) {
|
|
/* NOTE: doesn't use SVF-specified state paths */
|
|
jtag_add_plain_ir_scan(field.num_bits,
|
|
field.out_value,
|
|
field.in_value,
|
|
svf_para.ir_end_state);
|
|
}
|
|
|
|
svf_buffer_index += (i + 7) >> 3;
|
|
}
|
|
break;
|
|
case PIO:
|
|
case PIOMAP:
|
|
LOG_ERROR("PIO and PIOMAP are not supported");
|
|
return ERROR_FAIL;
|
|
case RUNTEST:
|
|
/* RUNTEST [run_state] run_count run_clk [min_time SEC [MAXIMUM max_time
|
|
* SEC]] [ENDSTATE end_state] */
|
|
/* RUNTEST [run_state] min_time SEC [MAXIMUM max_time SEC] [ENDSTATE
|
|
* end_state] */
|
|
if ((num_of_argu < 3) || (num_of_argu > 11)) {
|
|
LOG_ERROR("invalid parameter of %s", argus[0]);
|
|
return ERROR_FAIL;
|
|
}
|
|
/* init */
|
|
run_count = 0;
|
|
min_time = 0;
|
|
i = 1;
|
|
|
|
/* run_state */
|
|
i_tmp = tap_state_by_name(argus[i]);
|
|
if (i_tmp != TAP_INVALID) {
|
|
if (svf_tap_state_is_stable(i_tmp)) {
|
|
svf_para.runtest_run_state = i_tmp;
|
|
|
|
/* When a run_state is specified, the new
|
|
* run_state becomes the default end_state.
|
|
*/
|
|
svf_para.runtest_end_state = i_tmp;
|
|
LOG_DEBUG("\trun_state = %s", tap_state_name(i_tmp));
|
|
i++;
|
|
} else {
|
|
LOG_ERROR("%s: %s is not a stable state", argus[0], tap_state_name(i_tmp));
|
|
return ERROR_FAIL;
|
|
}
|
|
}
|
|
|
|
/* run_count run_clk */
|
|
if (((i + 2) <= num_of_argu) && strcmp(argus[i + 1], "SEC")) {
|
|
if (!strcmp(argus[i + 1], "TCK")) {
|
|
/* clock source is TCK */
|
|
run_count = atoi(argus[i]);
|
|
LOG_DEBUG("\trun_count@TCK = %d", run_count);
|
|
} else {
|
|
LOG_ERROR("%s not supported for clock", argus[i + 1]);
|
|
return ERROR_FAIL;
|
|
}
|
|
i += 2;
|
|
}
|
|
/* min_time SEC */
|
|
if (((i + 2) <= num_of_argu) && !strcmp(argus[i + 1], "SEC")) {
|
|
min_time = atof(argus[i]);
|
|
LOG_DEBUG("\tmin_time = %fs", min_time);
|
|
i += 2;
|
|
}
|
|
/* MAXIMUM max_time SEC */
|
|
if (((i + 3) <= num_of_argu) &&
|
|
!strcmp(argus[i], "MAXIMUM") && !strcmp(argus[i + 2], "SEC")) {
|
|
float max_time = 0;
|
|
max_time = atof(argus[i + 1]);
|
|
LOG_DEBUG("\tmax_time = %fs", max_time);
|
|
i += 3;
|
|
}
|
|
/* ENDSTATE end_state */
|
|
if (((i + 2) <= num_of_argu) && !strcmp(argus[i], "ENDSTATE")) {
|
|
i_tmp = tap_state_by_name(argus[i + 1]);
|
|
|
|
if (svf_tap_state_is_stable(i_tmp)) {
|
|
svf_para.runtest_end_state = i_tmp;
|
|
LOG_DEBUG("\tend_state = %s", tap_state_name(i_tmp));
|
|
} else {
|
|
LOG_ERROR("%s: %s is not a stable state", argus[0], tap_state_name(i_tmp));
|
|
return ERROR_FAIL;
|
|
}
|
|
i += 2;
|
|
}
|
|
|
|
/* all parameter should be parsed */
|
|
if (i == num_of_argu) {
|
|
#if 1
|
|
/* FIXME handle statemove failures */
|
|
uint32_t min_usec = 1000000 * min_time;
|
|
|
|
/* enter into run_state if necessary */
|
|
if (cmd_queue_cur_state != svf_para.runtest_run_state)
|
|
svf_add_statemove(svf_para.runtest_run_state);
|
|
|
|
/* add clocks and/or min wait */
|
|
if (run_count > 0) {
|
|
if (!svf_nil)
|
|
jtag_add_clocks(run_count);
|
|
}
|
|
|
|
if (min_usec > 0) {
|
|
if (!svf_nil)
|
|
jtag_add_sleep(min_usec);
|
|
}
|
|
|
|
/* move to end_state if necessary */
|
|
if (svf_para.runtest_end_state != svf_para.runtest_run_state)
|
|
svf_add_statemove(svf_para.runtest_end_state);
|
|
|
|
#else
|
|
if (svf_para.runtest_run_state != TAP_IDLE) {
|
|
LOG_ERROR("cannot runtest in %s state",
|
|
tap_state_name(svf_para.runtest_run_state));
|
|
return ERROR_FAIL;
|
|
}
|
|
|
|
if (!svf_nil)
|
|
jtag_add_runtest(run_count, svf_para.runtest_end_state);
|
|
#endif
|
|
} else {
|
|
LOG_ERROR("fail to parse parameter of RUNTEST, %d out of %d is parsed",
|
|
i,
|
|
num_of_argu);
|
|
return ERROR_FAIL;
|
|
}
|
|
break;
|
|
case STATE:
|
|
/* STATE [pathstate1 [pathstate2 ...[pathstaten]]] stable_state */
|
|
if (num_of_argu < 2) {
|
|
LOG_ERROR("invalid parameter of %s", argus[0]);
|
|
return ERROR_FAIL;
|
|
}
|
|
if (num_of_argu > 2) {
|
|
/* STATE pathstate1 ... stable_state */
|
|
path = malloc((num_of_argu - 1) * sizeof(tap_state_t));
|
|
if (!path) {
|
|
LOG_ERROR("not enough memory");
|
|
return ERROR_FAIL;
|
|
}
|
|
num_of_argu--; /* num of path */
|
|
i_tmp = 1; /* path is from parameter 1 */
|
|
for (i = 0; i < num_of_argu; i++, i_tmp++) {
|
|
path[i] = tap_state_by_name(argus[i_tmp]);
|
|
if (path[i] == TAP_INVALID) {
|
|
LOG_ERROR("%s: %s is not a valid state", argus[0], argus[i_tmp]);
|
|
free(path);
|
|
return ERROR_FAIL;
|
|
}
|
|
/* OpenOCD refuses paths containing TAP_RESET */
|
|
if (path[i] == TAP_RESET) {
|
|
/* FIXME last state MUST be stable! */
|
|
if (i > 0) {
|
|
if (!svf_nil)
|
|
jtag_add_pathmove(i, path);
|
|
}
|
|
if (!svf_nil)
|
|
jtag_add_tlr();
|
|
num_of_argu -= i + 1;
|
|
i = -1;
|
|
}
|
|
}
|
|
if (num_of_argu > 0) {
|
|
/* execute last path if necessary */
|
|
if (svf_tap_state_is_stable(path[num_of_argu - 1])) {
|
|
/* last state MUST be stable state */
|
|
if (!svf_nil)
|
|
jtag_add_pathmove(num_of_argu, path);
|
|
LOG_DEBUG("\tmove to %s by path_move",
|
|
tap_state_name(path[num_of_argu - 1]));
|
|
} else {
|
|
LOG_ERROR("%s: %s is not a stable state",
|
|
argus[0],
|
|
tap_state_name(path[num_of_argu - 1]));
|
|
free(path);
|
|
return ERROR_FAIL;
|
|
}
|
|
}
|
|
|
|
free(path);
|
|
path = NULL;
|
|
} else {
|
|
/* STATE stable_state */
|
|
state = tap_state_by_name(argus[1]);
|
|
if (svf_tap_state_is_stable(state)) {
|
|
LOG_DEBUG("\tmove to %s by svf_add_statemove",
|
|
tap_state_name(state));
|
|
/* FIXME handle statemove failures */
|
|
svf_add_statemove(state);
|
|
} else {
|
|
LOG_ERROR("%s: %s is not a stable state",
|
|
argus[0], tap_state_name(state));
|
|
return ERROR_FAIL;
|
|
}
|
|
}
|
|
break;
|
|
case TRST:
|
|
/* TRST trst_mode */
|
|
if (num_of_argu != 2) {
|
|
LOG_ERROR("invalid parameter of %s", argus[0]);
|
|
return ERROR_FAIL;
|
|
}
|
|
if (svf_para.trst_mode != TRST_ABSENT) {
|
|
if (svf_execute_tap() != ERROR_OK)
|
|
return ERROR_FAIL;
|
|
i_tmp = svf_find_string_in_array(argus[1],
|
|
(char **)svf_trst_mode_name,
|
|
ARRAY_SIZE(svf_trst_mode_name));
|
|
switch (i_tmp) {
|
|
case TRST_ON:
|
|
if (!svf_nil)
|
|
jtag_add_reset(1, 0);
|
|
break;
|
|
case TRST_Z:
|
|
case TRST_OFF:
|
|
if (!svf_nil)
|
|
jtag_add_reset(0, 0);
|
|
break;
|
|
case TRST_ABSENT:
|
|
break;
|
|
default:
|
|
LOG_ERROR("unknown TRST mode: %s", argus[1]);
|
|
return ERROR_FAIL;
|
|
}
|
|
svf_para.trst_mode = i_tmp;
|
|
LOG_DEBUG("\ttrst_mode = %s", svf_trst_mode_name[svf_para.trst_mode]);
|
|
} else {
|
|
LOG_ERROR("can not accept TRST command if trst_mode is ABSENT");
|
|
return ERROR_FAIL;
|
|
}
|
|
break;
|
|
default:
|
|
LOG_ERROR("invalid svf command: %s", argus[0]);
|
|
return ERROR_FAIL;
|
|
}
|
|
|
|
if (!svf_quiet) {
|
|
if (padding_command_skipped)
|
|
LOG_USER("(Above Padding command skipped, as per -tap argument)");
|
|
}
|
|
|
|
if (debug_level >= LOG_LVL_DEBUG) {
|
|
/* for convenient debugging, execute tap if possible */
|
|
if ((svf_buffer_index > 0) &&
|
|
(((command != STATE) && (command != RUNTEST)) ||
|
|
((command == STATE) && (num_of_argu == 2)))) {
|
|
if (svf_execute_tap() != ERROR_OK)
|
|
return ERROR_FAIL;
|
|
|
|
/* output debug info */
|
|
if ((command == SIR) || (command == SDR))
|
|
SVF_BUF_LOG(DEBUG, svf_tdi_buffer, svf_check_tdo_para[0].bit_len, "TDO read");
|
|
}
|
|
} else {
|
|
/* for fast executing, execute tap if necessary */
|
|
/* half of the buffer is for the next command */
|
|
if (((svf_buffer_index >= SVF_MAX_BUFFER_SIZE_TO_COMMIT) ||
|
|
(svf_check_tdo_para_index >= SVF_CHECK_TDO_PARA_SIZE / 2)) &&
|
|
(((command != STATE) && (command != RUNTEST)) ||
|
|
((command == STATE) && (num_of_argu == 2))))
|
|
return svf_execute_tap();
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static const struct command_registration svf_command_handlers[] = {
|
|
{
|
|
.name = "svf",
|
|
.handler = handle_svf_command,
|
|
.mode = COMMAND_EXEC,
|
|
.help = "Runs a SVF file.",
|
|
.usage = "[-tap device.tap] <file> [quiet] [nil] [progress] [ignore_error]",
|
|
},
|
|
COMMAND_REGISTRATION_DONE
|
|
};
|
|
|
|
int svf_register_commands(struct command_context *cmd_ctx)
|
|
{
|
|
return register_commands(cmd_ctx, NULL, svf_command_handlers);
|
|
}
|