b61a280860
stm32l4_work_area struct is shared between the loader and stm32l4x flash driver '*wp' and '*rp' pointers' size is 4 bytes each since stm32l4x devices have 32-bit processors. however when used in openocd code, their size depends on the host if the host is 32-bit, then the size is 4 bytes each. if the host is 64-bit, then the size is 8 bytes each. to avoid this size difference, change their types depending on the usage (pointers for the loader, and 32-bit integers in openocd code). Change-Id: I0a3df4bb4bf872b01cdb9357eb28307868d7d469 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6556 Tested-by: jenkins Reviewed-by: Yestin Sun <sunyi0804@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> |
||
|---|---|---|
| .. | ||
| checksum | ||
| debug/xscale | ||
| erase_check | ||
| flash | ||
| watchdog | ||
| Makefile | ||
| README | ||
README
Included in these directories are the src to the various ram loaders used within openocd. ** target checksum loaders ** checksum/armv4_5_crc.s : - ARMv4 and ARMv5 checksum loader : see target/arm_crc_code.c:arm_crc_code checksum/armv7m_crc.s : - ARMv7m checksum loader : see target/armv7m.c:cortex_m_crc_code checksum/mips32.s : - MIPS32 checksum loader : see target/mips32.c:mips_crc_code ** target flash loaders ** flash/pic32mx.s : - Microchip PIC32 flash loader : see flash/nor/pic32mx.c:pic32mx_flash_write_code flash/stellaris.s : - TI Stellaris flash loader : see flash/nor/stellaris.c:stellaris_write_code flash/stm32x.s : - ST STM32 flash loader : see flash/nor/stm32x.c:stm32x_flash_write_code flash/str7x.s : - ST STR7 flash loader : see flash/nor/str7x.c:str7x_flash_write_code flash/str9x.s : - ST STR9 flash loader : see flash/nor/str9x.c:str9x_flash_write_code Spencer Oliver spen@spen-soft.co.uk