riscv-openocd/tcl/target/esp32s3.cfg

75 lines
1.7 KiB
INI
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# SPDX-License-Identifier: GPL-2.0-or-later
#
# Source the ESP common configuration file.
source [find target/esp_common.cfg]
# Target specific global variables
set _CHIPNAME "esp32s3"
set _CPUTAPID 0x120034e5
set _ESP_ARCH "xtensa"
set _ONLYCPU 3
set _ESP_SMP_TARGET 1
set _ESP_SMP_BREAK 1
set _ESP_EFUSE_MAC_ADDR_REG 0x60007044
if { [info exists ESP32_S3_ONLYCPU] } {
set _ONLYCPU $ESP32_S3_ONLYCPU
}
proc esp32s3_memprot_is_enabled { } {
# SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SPLIT_LINE_CONSTRAIN_0_REG
if { [get_mmr_bit 0x600C10C0 0] != 0 } {
return 1
}
# SENSITIVE_CORE_0_PIF_PMS_CONSTRAIN_0_REG
if { [get_mmr_bit 0x600C1124 0] != 0 } {
return 1
}
# SENSITIVE_CORE_1_PIF_PMS_CONSTRAIN_0_REG
if { [get_mmr_bit 0x600C11D0 0] != 0 } {
return 1
}
# IRAM0, SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_0_REG
if { [get_mmr_bit 0x600C10D8 0] != 0 } {
return 1
}
# DRAM0, SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_0_REG
if { [get_mmr_bit 0x600C10FC 0] != 0 } {
return 1
}
# SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_0_REG
if { [get_mmr_bit 0x600C10E4 0] != 0 } {
return 1
}
# SENSITIVE_CORE_1_IRAM0_PMS_MONITOR_0_REG
if { [get_mmr_bit 0x600C10F0 0] != 0 } {
return 1
}
# SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_0_REG
if { [get_mmr_bit 0x600C1104 0] != 0 } {
return 1
}
# SENSITIVE_CORE_1_DRAM0_PMS_MONITOR_0_REG
if { [get_mmr_bit 0x600C1114 0] != 0 } {
return 1
}
# SENSITIVE_CORE_0_PIF_PMS_MONITOR_0_REG
if { [get_mmr_bit 0x600C119C 0] != 0 } {
return 1
}
# SENSITIVE_CORE_1_PIF_PMS_MONITOR_0_REG
if { [get_mmr_bit 0x600C1248 0] != 0 } {
return 1
}
return 0
}
proc esp32s3_soc_reset { } {
soft_reset_halt
}
create_esp_target $_ESP_ARCH
source [find target/xtensa-core-esp32s3.cfg]