6b9d19d367
Supported SoCs: AR71xx, AR724x, AR91xx, AR93xx, QCA9558 Extended and revised version of my original patch submitted by Dmytro here: http://openocd.zylin.com/#/c/3390 This driver is using pure SPI mode, so the flash base address is not used except some flash commands (e.g. "flash program") need it to distinguish the banks. Example config with all 3 chip selects: flash bank flash0 ath79 0 0 0 0 $_TARGETNAME cs0 flash bank flash1 ath79 0x10000000 0 0 0 $_TARGETNAME cs1 flash bank flash2 ath79 0x20000000 0 0 0 $_TARGETNAME cs2 Example usage: > flash probe flash0 Found flash device 'win w25q128fv' (ID 0x001840ef) flash 'ath79' found at 0x00000000 > flash probe flash1 No SPI flash found > flash probe flash2 No SPI flash found > flash banks > flash read_bank flash0 /tmp/test.bin 0x00000000 0x1000 reading 4096 bytes from flash @0x00000000 wrote 4096 bytes to file /tmp/test.bin from flash bank 0 at offset 0x00000000 in 28.688066s (0.139 KiB/s) Change-Id: I5feb697722c07e83a9c1b361a9db7b06bc699aa8 Signed-off-by: Tobias Diedrich <ranma+openocd@tdiedrich.de> Reviewed-on: http://openocd.zylin.com/3612 Tested-by: jenkins Reviewed-by: Dmytro <dioptimizer@hotmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com> |
||
|---|---|---|
| .. | ||
| manual | ||
| Makefile.am | ||
| fdl.texi | ||
| openocd.1 | ||
| openocd.texi | ||