/* SPDX-License-Identifier: GPL-2.0-or-later */

/***************************************************************************
 *   Copyright (C) 2019 by Andreas Bolsch                                  *
 *   andreas.bolsch@mni.thm.de                                             *
 ***************************************************************************/

	.text
	.syntax unified
	.cpu cortex-m0
	.thumb
	.thumb_func

/* Params:
 * r0 - sector count
 * r1 - QSPI io_base

 * Clobbered:
 * r2 - r7 tmp */

#include "../../../../src/flash/nor/stmqspi.h"

	.macro	qspi_abort
	movs	r4, #(1<<SPI_ABORT)			/* abort bit mask */
	ldr		r7, [r1, #QSPI_CR]			/* get QSPI_CR register */
	orrs	r7, r7, r4					/* set abort bit */
	str		r7, [r1, #QSPI_CR]			/* store new CR register */
	.endm

	.macro	wait_busy
0:
	ldr		r7, [r1, #QSPI_SR]			/* load status */
	lsrs	r7, r7, #(SPI_BUSY+1)		/* shift BUSY into C */
	bcs		0b							/* loop until BUSY cleared */
	movs	r7, #(1<<SPI_TCF)			/* TCF bitmask */
	str		r7, [r1, #QSPI_FCR]			/* clear TCF flag */
	.endm

start:
	adr		r2, buffer					/* pointer to start of buffer */
	movs	r3, #QSPI_DR				/* load QSPI_DR address offset */
	add		r3, r3, r1					/* address of QSPI_DR */
sector_start:
	qspi_abort							/* start in clean state */
	ldmia	r2!, {r4, r5, r6}			/* load address offset, length, initial value */
	subs	r2, r2, #8					/* point to length */
	subs	r5, r5, #1					/* decrement sector length for DLR */
	wait_busy
	str		r5, [r1, #QSPI_DLR]			/* size-1 in DLR register */
	ldr		r7, ccr_page_read			/* CCR for page read */
	str		r7, [r1, #QSPI_CCR]			/* initiate transfer */
	str		r4, [r1, #QSPI_AR]			/* store SPI start address */
	ldr		r7, [r1, #QSPI_SR]			/* wait for command startup */
read_loop:
	ldrb	r4, [r3]					/* read next byte from DR */
	movs	r7, #0xFF					/* fill bits 8-15 */
	lsls	r7, r7, #8					/* with ones */
	orrs	r4, r4, r7					/* copy ones to left of read byte */
	ands	r6, r6, r4					/* and read byte to result */
	lsls	r4, r4, #8					/* shift result into higher byte */
	orrs	r6, r6, r4					/* or read byte to result */
	subs	r5, r5, #1					/* decrement byte (count-1) */
	bpl		read_loop					/* again if sector not completed */
	adds	r5, r5, #1					/* increment count due to the -1 */
	stmia	r2!, {r5, r6}				/* save final count and result for sector */
	subs	r0, r0, #1					/* decrement sector count */
	bne		sector_start				/* next sector? */
	qspi_abort							/* to idle state */
	.align	2							/* align to word, bkpt is 4 words */
	bkpt	#0							/* before code end for exit_point */
	.align	2							/* align to word */

	.space	4							/* not used */
ccr_page_read:
	.space	4							/* QSPI_CCR value for read command */
	.space	4							/* not used */
	.space	4							/* not used */

	.equ buffer, .