# SPDX-License-Identifier: GPL-2.0-or-later

#
# Bouffalo Labs BL702L and BL704L target
#
# https://en.bouffalolab.com/product/?type=detail&id=26
#
# Default JTAG pins: (if not changed by eFuse configuration)
# TMS - GPIO0
# TDI - GPIO1
# TCK - GPIO2
# TDO - GPIO7
#

if { [info exists CHIPNAME] } {
	set BL602_CHIPNAME $CHIPNAME
} else {
	set BL602_CHIPNAME bl702l
}

set CPUTAPID 0x20000e05

# For work-area we use beginning of OCRAM, since BL702L have only ITCM, which can be taken
# by L1 cache and XIP during runtime.
set WORKAREAADDR 0x42020000
set WORKAREASIZE 0x10000

source [find target/bl602_common.cfg]

# JTAG reset is broken. Read comment of bl602_sw_reset function for more information
# On BL702L, we are forcing boot into ISP mode, so chip stays in BootROM until JTAG re-attach
$_TARGETNAME configure -event reset-assert {
	halt

	# Restore clocks to defaults
	bl602_restore_clock_defaults

	# In HBN_RSV2, set HBN_RELEASE_CORE to HBN_RELEASE_CORE_FLAG (4)
	# and HBN_USER_BOOT_SEL to 1 (ISP)
	mww 0x4000f108 0x44000000

	# Perform software reset
	bl602_sw_reset

	# Reset HBN_RSV2 so BootROM will not force ISP mode again
	mww 0x4000f108 0x00000000
}