#
# Texas Instruments CC3220SF - ARM Cortex-M4
#
# http://www.ti.com/CC3220SF
#

source [find target/swj-dp.tcl]
source [find target/icepick.cfg]
source [find target/ti_cc32xx.cfg]

set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME cc3220sf 0 0 0 0 $_TARGETNAME

#
# On CC32xx family of devices, sysreqreset is disabled, and vectreset is
# blocked by the boot loader (stops in a while(1) statement). srst reset can
# leave the target in a state that prevents debug. The following uses the
# soft_reset_halt command to reset and halt the target. Then the PC and stack
# are initialized from internal flash. This allows for a more reliable reset,
# but with two caveats: it only works for the SF variant that has internal
# flash, and it only resets the CPU and not any peripherals.
#

proc ocd_process_reset_inner { MODE } {

	soft_reset_halt

	# Initialize MSP, PSP, and PC from vector table at flash 0x01000800
	set boot [read_memory 0x01000800 32 2]

	reg msp [lindex $boot 0]
	reg psp [lindex $boot 0]
	reg pc [lindex $boot 1]

	if { 0 == [string compare $MODE run ] } {
		resume
	}

	cc32xx.cpu invoke-event reset-end
}