# SPDX-License-Identifier: GPL-2.0-or-later

######################################
# Target:    Atmel AT91SAM9G20
######################################

if { [info exists CHIPNAME] } {
	set AT91_CHIPNAME $CHIPNAME
} else {
	set AT91_CHIPNAME at91sam9g20
}

source [find target/at91sam9.cfg]

# Set fallback clock to 1/6 of worst-case clock speed (which would be the 32.768 kHz slow clock).

adapter speed 5

# Establish internal SRAM memory work areas that are important to pre-bootstrap loaders, etc.  The
# AT91SAM9G20 has two SRAM areas, one starting at 0x00200000 and the other starting at 0x00300000.
# Both areas are 16 kB long.

#$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 1
$_TARGETNAME configure -work-area-phys 0x00300000 -work-area-size 0x4000 -work-area-backup 1