Commit Graph

5 Commits

Author SHA1 Message Date
Paul Fertser 31c58c139d jtag: drivers: stlink: handle all versions with single config
Extend HLA interface to allow multiple VID/PID pairs and use it to
autodetect the connected stlink version.

Change-Id: I35cd895b2260e23cf0e8fcb1fc11a78c2b99c69b
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/3961
Tested-by: jenkins
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2017-12-12 21:13:55 +00:00
Paul Fertser a1bbf4b75b cfg: add srst_nogate to the supported targets, remove from board configs
It depends on the particular target whether it can work with SRST
asserted or not, so this belongs to the target config rather than the
board config.

Also, this allows for simple

openocd -f myboard.cfg -c "reset_config connect_assert_srst"

command to be used whenever a user feels a need to connect to an
unresponsive target.

Change-Id: I3d8da9ae47088fc0c75a20bfdd20074be1014de0
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2459
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26 20:54:51 +00:00
Paul Fertser c7384117c6 Allow transports to override the selected target (hla configs unification)
This should allow to share common configs for both regular access and
high-level adapters.

Use the newly-added functionality in stlink and icdi drivers, amend
the configs accordingly.

Runtime-tested with a TI tm4c123g board.

Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
[gus@projectgus.com: context-specific deprecation warnings]
Signed-off-by: Angus Gratton <gus@projectgus.com>
[andrew.smirnov@gmail.com: additional nrf51.cfg mods]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Reviewed-on: http://openocd.zylin.com/1664
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-11 21:25:56 +00:00
Spencer Oliver ee38fff78b cfg: fix incorrect stm32vldiscovery working area
The working area used in the config was incorrect, we only have 8K on this
board not 16K as the original cfg was declaring.

Change-Id: Ie0309fb86d839bd3bc1ac9383905b581fac5c388
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/598
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30 13:06:34 +00:00
Spencer Oliver f86986a9ef cfg: add stm32vldiscovery board config
Change-Id: I6343d1e61153ba71c71f8a473171972abb8e400d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/432
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-07 22:39:04 +00:00